Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx JMB363: IDE controller at PCI slot 0000:05:00.0 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 18 JMB363: chipset revision 2 JMB363: 100% native mode on irq 18 JMB363: dma_base is invalid ide0: JMB363 Bus-Master DMA disabled (BIOS) JMB363: dma_base is invalid ide1: JMB363 Bus-Master DMA disabled (BIOS) Probing IDE interface ide0... Probing IDE interface ide1... JMB363: IDE controller at PCI slot 0000:05:00.1 PCI: Enabling device 0000:05:00.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 16 (level, low) -> IRQ 16 JMB363: chipset revision 2 JMB363: 100% native mode on irq 16 PCI: Setting latency timer of device 0000:05:00.1 to 64 ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:DMA, hdh:pio Probing IDE interface ide2... hde: ASUS CD-S520/A4, ATAPI CD/DVD-ROM drive ide2 at 0x7000-0x7007,0x7402 on irq 16 Probing IDE interface ide3... hdg: Maxtor 6L200M0, ATA DISK drive ide3 at 0x7800-0x7807,0x7c02 on irq 16 Probing IDE interface ide0... Probing IDE interface ide1... hdg: max request size: 512KiB hdg: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133) hdg: cache flushes supported hdg: hdg1The following is from a NON-WORKING boot of any newer kernel:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx JMB363: IDE controller at PCI slot 0000:05:00.0 PCI: Device 0000:05:00.0 not available because of resource collisions ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 18 JMB363: BIOS configuration fixed. JMB363: chipset revision 2 JMB363: 100% native mode on irq 18 JMB363: dma_base is invalid ide0: JMB363 Bus-Master DMA disabled (BIOS) JMB363: dma_base is invalid ide1: JMB363 Bus-Master DMA disabled (BIOS) JMB363: IDE controller at PCI slot 0000:05:00.1 PCI: Enabling device 0000:05:00.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 16 (level, low) -> IRQ 16 JMB363: chipset revision 2 JMB363: 100% native mode on irq 16 ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:DMA, hdh:pio hde: ASUS CD-S520/A4, ATAPI CD/DVD-ROM drive ide2 at 0x7000-0x7007,0x7402 on irq 16