On 29.01.2015 23:00, Stephen Morris wrote:
> On 01/30/2015 08:34 AM, Stephen Morris wrote:
>> On 01/30/2015 06:47 AM, poma wrote:
>>> On 29.01.2015 20:25, poma wrote:
>>>> ...
>>>>> Try this
>>>>> $ git clone
https://github.com/vsurrel/rtl8812AU_8821AU_linux.git
>>>>
>>>>> $ cd
rtl8812AU_8821AU_linux/
>>>>> $ git log -1
>>>>> commit 7a427372bf5540285d95f090ad5523019a365415
>>>>> Author: MilhouseVH <milhouseVH.github(a)nmacleod.com
>>>>> Date: Thu Dec 18 11:42:48 2014 +0000
>>>>
>>>>> Add
support for kernel 3.18
>>>>
>>>> Also try PLD Linux
method:
>>>
>>>> $ curl -JLO
>>>>
https://github.com/pld-linux/rtl8812au/archive/master.tar.gz
>>>> $ tar xf rtl8812au-master.tar.gz
>>>
>>>> $ curl -JLO
>>>>
https://github.com/austinmarton/rtl8812au_linux/archive/master.tar.gz
>>>> $ tar xf rtl8812au_linux-master.tar.gz
>>>
>>>> $ cp
rtl8812au-master/*.patch rtl8812au_linux-master/
>>>
>>>> $ cd
rtl8812au_linux-master/
>>>
>>>> $ patch -p1 <
linux-3.11.patch
>>>> $ patch -p1 < disable-debug.patch
>>>> $ patch -p1 < enable-cfg80211-support.patch
>>>> $ patch -p1 < update-cfg80211-support.patch
>>>> $ patch -p1 < warnings.patch
>>>> $ patch -p1 < gcc-4.9.patch
>>>> $ patch -p1 < linux-3.18.patch
>>>
>>>> $ make
>>>
>>>> $ su
>>>
>>>> # cp 8812au.ko
/lib/modules/$(uname -r)/updates/
>>>> # depmod
>>>> # modprobe -v 8812au
>>>
>>>> # dmesg
>>>> ...
>>>> RTL871X: module init start
>>>> RTL871X: rtl8812au v4.3.2_11100.20140411
>>>> RTL871X: build time: Jan 29 2015 20:10:14
>>>> usbcore: registered new interface driver rtl8812au
>>>> RTL871X: module init ret=0
>>>
>>>
>>>> Ref.
>>>> Driver for AC1200 (802.11ac) Wireless Dual-Band USB Adapter
>>>>
https://github.com/pld-linux/rtl8812au
>>>> &
>>>> rtl8812au Linux driver (v4.3.2 fork) for Realtek based 802.11ac devices
>>>>
https://github.com/austinmarton/rtl8812au_linux
>>>> =
>>>>
ftp://master-ftp.pld-linux.org/dists/3.0/PLD/SRPMS/RPMS/rtl8812au-4.3.2_1...
>>>
>>>
>>>
>>> This repo is also interesting:
>>
>>> Rewrite RTL 8812
driver
>>>
https://github.com/ulli-kroll/rtl8821au
>>
>>> even has firmwares:
>>> $ ls rtl8821au/firmware/
>>> rtl8812aufw.bin rtl8821aufw.bin
>>
>>> make produces:
>>> ... error: macro "__DATE__"
>>> ... error: macro "__TIME__"
>>
>>> Classic! :)
>> That's the error I was getting with the original program that led to
>> this thread.
>> I'll also try the PLD drivers and see how they go.
> I've run the PLD patch process and the make to build the driver which I
> am using at the moment. I'll monitor this for a while and see how it
> goes. I'll also need to do the compile again as I have also just done an
> update run which has updated to the 3.18 kernel.
Take your time, man.
BTW what Vendor & Product/Model is that RTL8812AU device,
what is the output of 'lsusb'?
Also you mentioned Belkin router, what Vendor & Product/Model is it?
http://www.dd-wrt.com/wiki/index.php/Supported_Devices
https://wikidevi.com/wiki/Main_Page The usb adapter is a Dlink DWA-182, its model
number is DWA180A1. Lsusb
doesn't show much at all but is below. Bus 003 Device 002 is the adapter.
Just as a matter of interest what is Foundation 2.0 in the display below?
The modem/router is a Belkin 922 AC1750 with model number F9J1108V2.
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 002: ID 045e:0750 Microsoft Corp. Wired Keyboard 600
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 2001:3315 D-Link Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub