It's the Adaptec 2940 SCSI card with a Seagate Travan 10G/20G tape drive
that identifies itself as a Conner CTT8000-S.
You can catch up on the thread in the archives:
http://www.redhat.com/archives/fedora-list/2004-August/msg05266.html
I tried resetting the CMOS to clear my BIOS settings and except for
losing my mouse for a while it didn't do any good. As a matter of fact,
it's worse than before:
Sep 3 11:10:26 penguin kernel: ACPI: PCI interrupt 0000:00:0a.0[A] ->
GSI 11 (level, low) -> IRQ 11
Sep 3 11:10:26 penguin kernel: scsi3 : Adaptec AIC7XXX EISA/VLB/PCI
SCSI HBA DRIVER, Rev 6.2.36
Sep 3 11:10:26 penguin kernel: <Adaptec 2940 SCSI adapter>
Sep 3 11:10:26 penguin kernel: aic7870: Single Channel A, SCSI
Id=7, 16/253 SCBs
Sep 3 11:10:26 penguin kernel:
Sep 3 11:10:42 penguin kernel: (scsi3:A:4:0): Unexpected busfree in
Message-out phase Sep 3 11:10:42 penguin kernel: SEQADDR == 0x165
Sep 3 11:10:42 penguin kernel: (scsi3:A:4:0): Unexpected busfree in
Message-out phase
Sep 3 11:10:42 penguin kernel: SEQADDR == 0x165
Sep 3 11:10:42 penguin kernel: (scsi3:A:4:0): Unexpected busfree in
Message-out phase
Sep 3 11:10:42 penguin kernel: SEQADDR == 0x165 Sep 3 11:10:42 penguin
kernel: (scsi3:A:4:0): Unexpected busfree in Message-out phase
Sep 3 11:10:42 penguin kernel: SEQADDR == 0x165
.
.
.
Eeek... Anyway, I don't have another SCSI card to try and the only
other SCSI device I could find, a SCSI CD-ROM drive didn't work either.
I'm making arrangements to borrow a friends SCSI card to try it out in
case this card is just plain bad.
Tom Taylor wrote:
Coming into this thread late. Which Adaptec controller are you using? Also,
what SCSI tape unit?
--
Greg Gulik
http://www.gulik.org/greg/
greg @
gulik.org