On Mon, 2004-08-30 at 22:21, C. Linus Hicks wrote:
On Mon, 2004-08-30 at 22:37, Gregory Gulik wrote:
> C. Linus Hicks wrote:
> > It doesn't look like an issue since the driver is detecting the transfer
> > rate of 5mb/s, but you could try setting that rate in the SCSI adapter
> > for that SCSI ID. Also, you might want to see if you can get this tape
> > drive working on another system.
> I tried setting the transfer rate to 5mb/s in the BIOS. No dice.
> However I did notice the following error in dmesg after I tried to
> access the device with mt:
> st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA
I don't think that is an error. I have seen it in every log listing you
> > For someone who avoids SCSI, you sure do have a lot of SCSI controllers
> > in this machine.
> The only real device is this Adaptec card. The rest are a 6-in-1 USB
> card reader and a large IDE drive in a USB enclosure as a backup device.
Ah! So do you have any other SCSI devices you can test on this card to
verify that it works?
C. Linus Hicks <lhicks(a)nc.rr.com>
He said he only has one scsi device. All the others he mentioned are
USB (scsi emulation) and do not use the scsi adapter.