l.schneide wrote:
Hi Mikkel
i don't understand your replie
Lionel
Mikkel L. Ellertson wrote:
>l.schneide wrote:
>
>>Hi all
>>Thanks for you replie
>>but impossible ta make it to start. I got a dualboot with NT and its
>>work fine.
>>If i type cat /proc/interrupts i don t see it and the irq 11 is not use
>>Anyboddy got an idea ?
>>Where do i write manualy (what file) the config of the etherlink III ,
>>only in modprobe.conf . A what do i write exatly ?
>>
>>thanks
>>lionel
>>
>>l.schneide wrote:
>>
>>>Hi all
>>>
>>>I got a probleme to configure my nic card on fedora core 4. I use the
>>>network configuration under Gnomeand i can't cofing. the NIC
>>>I got a 3com Etherlink III on IRQ 11 and I/O 0x300. I tied a lot of
>>>think but i can make it to start.
>>>first In what field do i put the I/O adress ?
>>>and second in what file the config is write to see if it's right ?
>>>thanks
>>>lionel
>>>
>>>
>If you promise to stop top posting, I will tell you how to fix it.
>(You need to use the option statement in modprobe.conf.)
>
>Mikkel
>
hi all
I make all that i can do to start my nic card and it impossible
If i do cat /proc/irq i dont see the irq 11 used
In /etc/modprobe.conf i got
alias eth0 3c509
option 3C509 io=0x300 irq=11
The card is not in Pn'P mode. I configure it manualy with the good values. and it work
fine with NT and W98 as this
thanks for your replie
lionel