On 2020-11-01 14:13, Samuel Sieb wrote:
On 10/31/20 11:53 PM, ToddAndMargo via users wrote:
> # modprobe -r lp
> # modprobe -r parport_pc
> # modprobe parport_pc
> # modprobe lp
> # echo 9710 9900 > /sys/bus/pci/drivers/parport_pc/new_id
>
> But still no lp0 showing in CUPS or Printer Admin (notice
> I used the Linux term for it!)
After running the new_id command, do "lspci -k" again and see if it
picked it up.
All the lcpci command pick it up. They always do. There
is never an instance where they do not.
# lspci -k -s 01:00.0
01:00.0 Parallel controller: MosChip Semiconductor Technology Ltd.
MCS9900 Multi-I/O Controller
Subsystem: Device a000:2000
If not, then try "echo 1 > /sys/bus/pci/rescan" and
check
again.
Ran it anyway. No joy.