users September 2025

users@lists.fedoraproject.org

51 participants
54 discussions

ssh forward agent
by Frederic Muller 19 Jun '26

19 Jun '26

Hi! Is there something that changed in F42 making forward agent no longer working? I'm logging in using SSH key to a VPS to which I usually log in without any problem. I then sudo su, but it's asking for a password. My config is as such: Host myhost Hostname thatsite.com ForwardAgent Yes User myself IdentityFile ~/.ssh/s1_sca PubkeyAuthentication yes ControlPersist 5m I copied the old .ssh from my backup so it's all the same files and I do manage to ssh to the server, just not sudo su. Thank you. Fred

9 22

Barcode reader Android
by Ger van Dijck 18 May '26

18 May '26

Hi All, A question witch has nothing to do with Fedora : Does excist a barcode reader without advertising links for Android ? Ger van Dijck.

4 12

argh -- can't get wireless in someone else's house
by Robert P. J. Day 28 Dec '25

28 Dec '25

i'm embarrassed to admit that i can't, for the life of me, get a wireless connection at a friend's house at the moment. updated fedora 8, and a stock linksys WRT54GL. i have the SSID, i have the WEP key, i even have the router password, so i've logged in and checked everything -- no MAC filtering, no DHCP client limit, etc. but when i try to bring up wireless, /var/log/messages shows me: Feb 8 08:37:59 localhost dhclient: wmaster0: unknown hardware address type 801 Feb 8 08:37:59 localhost dhclient: wmaster0: unknown hardware address type 801 Feb 8 08:37:59 localhost dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8 Feb 8 08:38:07 localhost dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 11 ... Feb 8 08:39:00 localhost dhclient: No DHCPOFFERS received. i can certainly see the WAP: # iwlist wlan0 scan ... Cell 02 - Address: 00:18:39:6A:01:EF ESSID:"XXXXXXXX" Mode:Master Channel:6 Frequency:2.437 GHz (Channel 6) Quality=83/100 Signal level=-46 dBm Noise level=-67 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s ... i'm pretty much out of ideas here -- any thoughts? rday -- ======================================================================== Robert P. J. Day Linux Consulting, Training and Annoying Kernel Pedantry Waterloo, Ontario, CANADA Home page: http://crashcourse.ca Fedora Cookbook: http://crashcourse.ca/wiki/index.php/Fedora_Cookbook ========================================================================

4 16

Re: TV over the internet
by R. G. Newbury 10 Dec '25

10 Dec '25

On 01/11/2010 06:08 PM, users-request(a)lists.fedoraproject.org wrote: William Case wrote: >>> > > Hi Tim; >>>> > >> >>> > > I have a TV tuner card with my computer connected to my cable. It's >>> > > great. I prefer it to having my computer connected to my TV. >>> > > >> > What application do you use for watching? I've been looking for something user >> > friendly to give some people still on FC4 because they can understand xawtv and >> > all the easy to use applications stopped working. They rejected MythTV at the >> > point where it said "have your DBA set up a database..." and I have not found >> > anything which can handle clear-QAM, over the air digital, and NTSC without >> > asking for user entered channel frequencies in MHz or other things these people >> > aren't about to do. >> > >> > Note: even if I was willing to set it up for them for free, they would expect >> > support at the same price, advice I give them, time consuming work not so much. >> > > I use TVTime. It does one thing only, but it does it well. It gives me > my cable TV. > > It is easy to install and configure and just keeps on ticking. > > (Actually it does more than one thing, but there is no doubt that it's > main purpose is to run a TV tuner card for TV viewing.) Still on FC4???? On a Pentium 3 too I presume? Clear-QAM and OTA require an ATSC tuner, while an NTSC tuner is needed for analog cable. There are tuner units which will do both, although not all will do so simultaneously. Mythdora is a Fedora based, all in one install of mythtv. It will set up everything you need from one iso image. And Mythtv has definitely NOT required 'your DBA to set up a database' since well before Fedora 4. If your hardware is known to Fedora, then mythtv will not require any 'channel entered frequencies'. You merely select the proper tuning basis, such as US-Broadcast or US-cable when setting up the tuner(s). At the moment, the problematic area is setting up QAM on cable channels due to the cablecos using their own variable channel numbers for the channels (and generally, not including proper PSIP infor in the stream). That is, of course, where the cableco actually provides some clear QAM...which Rogers Cable in Canada, for example, has not done since June 2007. Geoff -- Please let me know if anything I say offends you. I may wish to offend you again in the future. Tux says: "Be regular. Eat cron flakes."

5 11

Curl trouble in F42
by Beartooth 24 Oct '25

24 Oct '25

Is it just me? When I do dnf upgrade on Fedora 42, I sometimes get error messages (generally failure to connect, or to connect aright, iiuc), blaming curl (of which all I know is how to spell it). Sometimes it does update some things but not others; sometimes the whole show stops. I'm presently running F42 Mate on three machines; I see nor rhyme nor reason as to the exact partial failures from one machine to another. -- Beartooth Staffwright, Not Quite Clueless Power User Remember I know little (precious little!) of where up is.

4 5

Issue with Virtual machine
by Patrick Dupre 21 Oct '25

21 Oct '25

Hello, I am not sure that it is entirely relevant for the list. I use oracle VM and Windows 7 I cannot connect on internet from windows: unidentified connection I use DHCP under windows on Linux Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 enp0s20f0u11 10.40.0.0 0.0.0.0 255.255.255.0 U 425 0 0 bridge0 192.168.1.0 0.0.0.0 255.255.255.0 U 100 0 0 enp0s20f0u11 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 enp0s20f0u11: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.120 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::c17c:128d:4290:d16f prefixlen 64 scopeid 0x20<link> ether 32:5b:54:67:c2:a7 txqueuelen 1000 (Ethernet) RX packets 1612 bytes 573729 (560.2 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1504 bytes 394533 (385.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 bridge0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 10.40.0.1 netmask 255.255.255.0 broadcast 10.40.0.255 ether b2:c9:44:5e:80:67 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 1215 overruns 0 carrier 0 collisions 0 enp1s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 50:91:e3:c9:58:ab txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 enp2s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 88:d7:f6:c5:a3:9d txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 52:54:00:99:2e:c5 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 44 overruns 0 carrier 0 collisions 0 Under Windows, I chose (NAT or internal network do not help) Bridged adapter and I have the choices enp1s0 enp2s0 bridge0 virbr0 Allows VMs Virtual cable connected Trying all the 4 the connection of the interface is OK Bridged adapter: cable connected all give: IP 169.254.168.63 but no gateway and Unidentified Network, without Internet connection Any idea? =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com ===========================================================================

9 40

securing this workstation.
by home user 19 Oct '25

19 Oct '25

(Fedora-42; stand-alone workstation) This is a totally new Fedora install on a stand-alone workstation, done today. It is not a part of a LAN or WAN or any other home or office network. It is not dual-boot. I do need for Firefox, Thunderbird, and dnf to be able to interact with the "outside world" appropriately. I do occasionally need to be able to download or upload things. Beyond those (and maybe other appropriate things that don't at the moment come to mind), I do not want anyone or anything to be able to get into this workstation. For example, no "ssh", "scp", "rlogin". I gather from the Fedora docs that I should use firewalld or firewalld-config. I have both. But Fedora docs does not give me enough detail. I am not an IT professional. What specifically should I do to keep unwanted people and things out?

16 60

After recent upgrade of firefox find it has as many as 50 lines with ps -ef | grep firefox??
by Michael D. Setzer II 18 Oct '25

18 Oct '25

Wondering if others are noticing this? Also seems to be processing slower? +------------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor (Retired) mailto:mikes@guam.net mailto:msetzerii@gmail.com mailto:msetzerii@gmx.com Guam - Where America's Day Begins G4L Disk Imaging Project maintainer http://sourceforge.net/projects/g4l/ +------------------------------------------------------------+

10 27

KGpg "An error occurred while scanning your keyring"
by Jonathan Ryshpan 12 Oct '25

12 Oct '25

This error pops up whenever my system boots up. Clicking on [Details <<] produces a message box with the single entry "Details" in it. What's happening? Thanks - jon

3 9

suspend
by Patrick Dupre 10 Oct '25

10 Oct '25

Hello, It seems linked to fedora 42. Now, when I go into suspend mode (from gnome), it may do it properly or not. Typically, if I start the suspend mode after running normally during a long time, it first goes well, but it does not entirely go suspend, cf. some fans still run. It it the case, the overall result is that I cannot not wake up the PC. I have to press the ON/OFF button which reboot the PC from scratch. Some ideas ? =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com ===========================================================================

2 3