Re: Problems connecting to VM via ssh (Ed Greshko)
by George R Goffe
Ed,
I have re-installed this system and selected the "KDE Plasma Workspaces" but without any optional packages since there is at least one pkg that fails and TERMINATES the installation. I wrote a bug report on that. The installation should at least allow the user to go back and de-select the failing package(s). Sigh...
Your input was VERY valuable... when you said/implied that your installation worked out of the box. I was able to ssh to the VM as a general user WITH NO CHANGES REQUIRED but root was disallowed. /var/log/secure reported words to the effect "uid NOT >= 1000" as the cause of the root failure.
I think I goofed with the sshd_config file.
So, again, THANKS for your help.
George...
Poc.
You suggested that this should go to the tst mailing list. Isn't that for testers? Maybe that's what I am? I enjoy being on the bleeding edge and reporting bugs. So, thanks for your input.
George...
4 years, 2 months
Fwd: Re: Fedora upgrade to 30 sluggish X startup then upgrade to 31
grey screen after login
by Mr Brian Domenick
Hi,
But, the nouveau driver was fine from day one. I really think its
crashing now in 31. I included a dmesg from the one time I was able to
actually get in on a vty. Below is just an excerpt as its repeating.
Thanks for your assistence,
Brian
[ 309.918856] dm_crypt hid_sensor_hub intel_ishtp_loader
intel_ishtp_hid i915 nouveau ttm i2c_algo_bit rtsx_pci_sdmmc mmc_core
drm_kms_helper crct10dif_pclmul mxm_wmi crc32_pclmul nvme crc32c_intel
drm rtsx_pci intel_ish_ipc nvme_core ghash_clmulni_intel serio_raw
intel_ishtp i2c_hid wmi video pinctrl_sunrisepoint pinctrl_intel fuse
[ 309.918867] CPU: 2 PID: 5230 Comm: Xorg Tainted: G W OE
5.3.16-300.fc31.x86_64 #1
[ 309.918867] Hardware name: HP HP Spectre x360 Convertible
15-ch0xx/83BA, BIOS F.04 01/23/2018
[ 309.918896] RIP: 0010:g84_bar_flush+0xcf/0xe0 [nouveau]
[ 309.918897] Code: 8b 40 10 48 8b 78 10 4c 8b 6f 50 4d 85 ed 75 03 4c
8b 2f e8 c3 a9 fd e9 4c 89 ea 48 c7 c7 68 86 83 c0 48 89 c6 e8 0f b2 a5
e9 <0f> 0b eb a7 e8 28 af a5 e9 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
[ 309.918898] RSP: 0018:ffffb44e83e03658 EFLAGS: 00010082
[ 309.918900] RAX: 0000000000000000 RBX: ffff9d5fb408f800 RCX:
0000000000000006
[ 309.918901] RDX: 0000000000000007 RSI: 0000000000000092 RDI:
ffff9d5fbea97900
[ 309.918901] RBP: ffff9d5fbab2fd48 R08: 0000000000000001 R09:
000000000000229d
[ 309.918902] R10: 000000000000e194 R11: 0000000000000003 R12:
0000000000000246
[ 309.918903] R13: ffff9d5fbb90fed0 R14: 0000000000000001 R15:
0000000000000001
[ 309.918904] FS: 00007f8628b69f00(0000) GS:ffff9d5fbea80000(0000)
knlGS:0000000000000000
[ 309.918905] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 309.918906] CR2: 00007f862640c000 CR3: 000000044e3f6005 CR4:
00000000003606e0
[ 309.918907] Call Trace:
[ 309.918945] nv50_instobj_release+0x2f/0xc0 [nouveau]
[ 309.918982] nvkm_instobj_new+0xef/0x180 [nouveau]
[ 309.919008] nvkm_memory_new+0x3e/0x70 [nouveau]
[ 309.919046] nvkm_mmu_ptc_get.part.0+0x200/0x2a0 [nouveau]
[ 309.919084] nvkm_vmm_iter.constprop.0+0x4eb/0x810 [nouveau]
[ 309.919123] ? nvkm_vmm_sparse_unref_ptes+0x70/0x70 [nouveau]
[ 309.919161] ? gp100_vmm_pgt_pfn+0x180/0x180 [nouveau]
[ 309.919213] nvkm_vmm_ptes_get_map+0x2e/0x70 [nouveau]
[ 309.919252] ? nvkm_vmm_sparse_unref_ptes+0x70/0x70 [nouveau]
[ 309.919293] ? gp100_vmm_pgt_pfn+0x180/0x180 [nouveau]
[ 309.919332] nvkm_vmm_map+0x1cf/0x360 [nouveau]
[ 309.919366] nvkm_vram_map+0x56/0x80 [nouveau]
[ 309.919407] nvkm_uvmm_mthd+0x66a/0x780 [nouveau]
[ 309.919435] nvkm_ioctl+0xde/0x180 [nouveau]
[ 309.919476] ? nvkm_uvmm_mthd+0x11f/0x780 [nouveau]
[ 309.919502] nvif_object_mthd+0x104/0x130 [nouveau]
[ 309.919529] ? nvif_object_mthd+0x117/0x130 [nouveau]
[ 309.919558] nvif_vmm_map+0x115/0x130 [nouveau]
[ 309.919606] nouveau_mem_map+0x8d/0xf0 [nouveau]
[ 309.919654] nouveau_vma_new+0x1c1/0x1e0 [nouveau]
[ 309.919701] nouveau_gem_object_open+0x138/0x170 [nouveau]
[ 309.919716] drm_gem_handle_create_tail+0xcb/0x150 [drm]
[ 309.919732] ? drm_mode_create_dumb+0x90/0x90 [drm]
[ 309.919778] nouveau_display_dumb_create+0xa3/0xe0 [nouveau]
[ 309.919790] drm_ioctl_kernel+0xaa/0xf0 [drm]
[ 309.919802] drm_ioctl+0x208/0x390 [drm]
[ 309.919816] ? drm_mode_create_dumb+0x90/0x90 [drm]
[ 309.919818] ? rpm_suspend+0x80/0x5a0
[ 309.919866] nouveau_drm_ioctl+0x63/0xb0 [nouveau]
[ 309.919869] do_vfs_ioctl+0x405/0x660
[ 309.919871] ksys_ioctl+0x5e/0x90
[ 309.919873] __x64_sys_ioctl+0x16/0x20
[ 309.919876] do_syscall_64+0x5f/0x1a0
[ 309.919878] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 309.919880] RIP: 0033:0x7f8628fe034b
[ 309.919882] Code: 0f 1e fa 48 8b 05 3d 9b 0c 00 64 c7 00 26 00 00 00
48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d 9b 0c 00 f7 d8 64 89 01 48
[ 309.919883] RSP: 002b:00007ffd25b3c138 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[ 309.919885] RAX: ffffffffffffffda RBX: 00007ffd25b3c170 RCX:
00007f8628fe034b
[ 309.919885] RDX: 00007ffd25b3c170 RSI: 00000000c02064b2 RDI:
0000000000000010
[ 309.919886] RBP: 00000000c02064b2 R08: 0000555c1618e370 R09:
0000555c1618e460
[ 309.919887] R10: 0000000000000000 R11: 0000000000000246 R12:
0000555c1618e370
[ 309.919888] R13: 0000000000000010 R14: 0000000000000020 R15:
0000555c1618ee50
[ 309.919890] ---[ end trace a32afa8b919c6d8d ]---
[ 309.920879] nouveau 0000:01:00.0: tmr: stalled at ffffffffffffffff
[ 309.920881] ------------[ cut here ]------------
[ 309.920882] nouveau 0000:01:00.0: timeout
[ 309.920943] WARNING: CPU: 2 PID: 5230 at
drivers/gpu/drm/nouveau/nvkm/subdev/bar/g84.c:35 g84_bar_flush+0xcf/0xe0
[nouveau]
[ 309.920943] Modules linked in: rfcomm ccm xt_CHECKSUM xt_MASQUERADE
nf_nat_tftp nf_conntrack_tftp tun bridge stp llc nf_conntrack_netbios_ns
nf_conntrack_broadcast xt_CT ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter
ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute
ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat
nf_nat iptable_mangle iptable_raw iptable_security nf_conntrack
nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c ip_set nfnetlink ebtable_filter
ebtables ip6table_filter ip6_tables iptable_filter cmac bnep sunrpc vfat
fat iwlmvm snd_hda_codec_hdmi snd_soc_skl mac80211 snd_soc_hdac_hda
snd_hda_ext_core snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp
snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_soc_core
snd_hda_codec_generic ledtrig_audio snd_compress x86_pkg_temp_thermal
libarc4 ac97_bus intel_powerclamp snd_pcm_dmaengine coretemp
snd_hda_intel kvm_intel snd_hda_codec iwlwifi uvcvideo snd_hda_core
spi_pxa2xx_platform iTCO_wdt dw_dmac
[ 309.920964] iTCO_vendor_support snd_hwdep snd_seq videobuf2_vmalloc
videobuf2_memops hid_multitouch mei_hdcp kvm intel_rapl_msr
snd_seq_device btusb btrtl videobuf2_v4l2 irqbypass snd_pcm btbcm
intel_cstate videobuf2_common btintel intel_uncore snd_timer bluetooth
cfg80211 joydev rtsx_pci_ms intel_rapl_perf videodev snd
intel_wmi_thunderbolt wmi_bmof hp_wmi i2c_i801 soundcore
hid_sensor_magn_3d hid_sensor_incl_3d hid_sensor_rotation
hid_sensor_accel_3d hid_sensor_gyro_3d ecdh_generic hid_sensor_trigger
memstick mc hid_sensor_iio_common rfkill ecc
industrialio_triggered_buffer idma64 mei_me kfifo_buf ucsi_acpi mei
industrialio intel_lpss_pci typec_ucsi processor_thermal_device
intel_lpss intel_pch_thermal intel_xhci_usb_role_switch roles
intel_rapl_common cros_ec_ishtp cros_ec_core intel_soc_dts_iosf typec
int3403_thermal int340x_thermal_zone hp_wireless intel_vbtn
int3400_thermal sparse_keymap acpi_thermal_rel acpi_pad vboxpci(OE)
vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) ip_tables
[ 309.920985] dm_crypt hid_sensor_hub intel_ishtp_loader
intel_ishtp_hid i915 nouveau ttm i2c_algo_bit rtsx_pci_sdmmc mmc_core
drm_kms_helper crct10dif_pclmul mxm_wmi crc32_pclmul nvme crc32c_intel
drm rtsx_pci intel_ish_ipc nvme_core ghash_clmulni_intel serio_raw
intel_ishtp i2c_hid wmi video pinctrl_sunrisepoint pinctrl_intel fuse
[ 309.920993] CPU: 2 PID: 5230 Comm: Xorg Tainted: G W OE
5.3.16-300.fc31.x86_64 #1
[ 309.920994] Hardware name: HP HP Spectre x360 Convertible
15-ch0xx/83BA, BIOS F.04 01/23/2018
[ 309.921024] RIP: 0010:g84_bar_flush+0xcf/0xe0 [nouveau]
[ 309.921025] Code: 8b 40 10 48 8b 78 10 4c 8b 6f 50 4d 85 ed 75 03 4c
8b 2f e8 c3 a9 fd e9 4c 89 ea 48 c7 c7 68 86 83 c0 48 89 c6 e8 0f b2 a5
e9 <0f> 0b eb a7 e8 28 af a5 e9 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
[ 309.921026] RSP: 0018:ffffb44e83e03720 EFLAGS: 00010082
[ 309.921028] RAX: 0000000000000000 RBX: ffff9d5fb408f800 RCX:
0000000000000006
[ 309.921028] RDX: 0000000000000007 RSI: 0000000000000086 RDI:
ffff9d5fbea97900
[ 309.921029] RBP: ffff9d5fbab2fd48 R08: 0000000000000001 R09:
00000000000022dd
[ 309.921030] R10: 000000000000fb64 R11: 0000000000000003 R12:
0000000000000246
[ 309.921030] R13: ffff9d5fbb90fed0 R14: ffff9d5f6fb2b600 R15:
ffff9d5fb8789c80
[ 309.921032] FS: 00007f8628b69f00(0000) GS:ffff9d5fbea80000(0000)
knlGS:0000000000000000
[ 309.921033] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 309.921034] CR2: 00007f862640c000 CR3: 000000044e3f6005 CR4:
00000000003606e0
[ 309.921034] Call Trace:
[ 309.921073] nv50_instobj_release+0x2f/0xc0 [nouveau]
[ 309.921113] nvkm_vmm_iter.constprop.0+0x4a8/0x810 [nouveau]
[ 309.921151] ? nvkm_vmm_sparse_unref_ptes+0x70/0x70 [nouveau]
[ 309.921189] ? gp100_vmm_pgt_pfn+0x180/0x180 [nouveau]
[ 309.921227] nvkm_vmm_ptes_get_map+0x2e/0x70 [nouveau]
[ 309.921276] ? nvkm_vmm_sparse_unref_ptes+0x70/0x70 [nouveau]
[ 309.921312] ? gp100_vmm_pgt_pfn+0x180/0x180 [nouveau]
[ 309.921348] nvkm_vmm_map+0x1cf/0x360 [nouveau]
[ 309.921380] nvkm_vram_map+0x56/0x80 [nouveau]
[ 309.921417] nvkm_uvmm_mthd+0x66a/0x780 [nouveau]
[ 309.921442] nvkm_ioctl+0xde/0x180 [nouveau]
[ 309.921480] ? nvkm_uvmm_mthd+0x11f/0x780 [nouveau]
[ 309.921504] nvif_object_mthd+0x104/0x130 [nouveau]
[ 309.921529] ? nvif_object_mthd+0x117/0x130 [nouveau]
[ 309.921553] nvif_vmm_map+0x115/0x130 [nouveau]
[ 309.921598] nouveau_mem_map+0x8d/0xf0 [nouveau]
[ 309.921643] nouveau_vma_new+0x1c1/0x1e0 [nouveau]
[ 309.921687] nouveau_gem_object_open+0x138/0x170 [nouveau]
[ 309.921698] drm_gem_handle_create_tail+0xcb/0x150 [drm]
[ 309.921712] ? drm_mode_create_dumb+0x90/0x90 [drm]
[ 309.921756] nouveau_display_dumb_create+0xa3/0xe0 [nouveau]
[ 309.921767] drm_ioctl_kernel+0xaa/0xf0 [drm]
[ 309.921778] drm_ioctl+0x208/0x390 [drm]
[ 309.921790] ? drm_mode_create_dumb+0x90/0x90 [drm]
[ 309.921792] ? rpm_suspend+0x80/0x5a0
[ 309.921837] nouveau_drm_ioctl+0x63/0xb0 [nouveau]
[ 309.921840] do_vfs_ioctl+0x405/0x660
[ 309.921843] ksys_ioctl+0x5e/0x90
[ 309.921844] __x64_sys_ioctl+0x16/0x20
[ 309.921846] do_syscall_64+0x5f/0x1a0
[ 309.921848] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 309.921849] RIP: 0033:0x7f8628fe034b
[ 309.921851] Code: 0f 1e fa 48 8b 05 3d 9b 0c 00 64 c7 00 26 00 00 00
48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d 9b 0c 00 f7 d8 64 89 01 48
[ 309.921852] RSP: 002b:00007ffd25b3c138 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[ 309.921853] RAX: ffffffffffffffda RBX: 00007ffd25b3c170 RCX:
00007f8628fe034b
[ 309.921854] RDX: 00007ffd25b3c170 RSI: 00000000c02064b2 RDI:
0000000000000010
[ 309.921855] RBP: 00000000c02064b2 R08: 0000555c1618e370 R09:
0000555c1618e460
[ 309.921856] R10: 0000000000000000 R11: 0000000000000246 R12:
0000555c1618e370
[ 309.921856] R13: 0000000000000010 R14: 0000000000000020 R15:
0000555c1618ee50
[ 309.921859] ---[ end trace a32afa8b919c6d8e ]---
[ 309.922839] nouveau 0000:01:00.0: tmr: stalled at ffffffffffffffff
[ 309.922840] ------------[ cut here ]------------
[ 309.922841] nouveau 0000:01:00.0: timeout
[ 309.922890] WARNING: CPU: 2 PID: 5230 at
drivers/gpu/drm/nouveau/nvkm/subdev/bar/g84.c:35 g84_bar_flush+0xcf/0xe0
[nouveau]
[ 309.922891] Modules linked in: rfcomm ccm xt_CHECKSUM xt_MASQUERADE
nf_nat_tftp nf_conntrack_tftp tun bridge stp llc nf_conntrack_netbios_ns
nf_conntrack_broadcast xt_CT ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter
ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute
ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat
nf_nat iptable_mangle iptable_raw iptable_security nf_conntrack
nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c ip_set nfnetlink ebtable_filter
ebtables ip6table_filter ip6_tables iptable_filter cmac bnep sunrpc vfat
fat iwlmvm snd_hda_codec_hdmi snd_soc_skl mac80211 snd_soc_hdac_hda
snd_hda_ext_core snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp
snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_soc_core
snd_hda_codec_generic ledtrig_audio snd_compress x86_pkg_temp_thermal
libarc4 ac97_bus intel_powerclamp snd_pcm_dmaengine coretemp
snd_hda_intel kvm_intel snd_hda_codec iwlwifi uvcvideo snd_hda_core
spi_pxa2xx_platform iTCO_wdt dw_dmac
[ 309.922910] iTCO_vendor_support snd_hwdep snd_seq videobuf2_vmalloc
videobuf2_memops hid_multitouch mei_hdcp kvm intel_rapl_msr
snd_seq_device btusb btrtl videobuf2_v4l2 irqbypass snd_pcm btbcm
intel_cstate videobuf2_common btintel intel_uncore snd_timer bluetooth
cfg80211 joydev rtsx_pci_ms intel_rapl_perf videodev snd
intel_wmi_thunderbolt wmi_bmof hp_wmi i2c_i801 soundcore
hid_sensor_magn_3d hid_sensor_incl_3d hid_sensor_rotation
hid_sensor_accel_3d hid_sensor_gyro_3d ecdh_generic hid_sensor_trigger
memstick mc hid_sensor_iio_common rfkill ecc
industrialio_triggered_buffer idma64 mei_me kfifo_buf ucsi_acpi mei
industrialio intel_lpss_pci typec_ucsi processor_thermal_device
intel_lpss intel_pch_thermal intel_xhci_usb_role_switch roles
intel_rapl_common cros_ec_ishtp cros_ec_core intel_soc_dts_iosf typec
int3403_thermal int340x_thermal_zone hp_wireless intel_vbtn
int3400_thermal sparse_keymap acpi_thermal_rel acpi_pad vboxpci(OE)
vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) ip_tables
[ 309.922929] dm_crypt hid_sensor_hub intel_ishtp_loader
intel_ishtp_hid i915 nouveau ttm i2c_algo_bit rtsx_pci_sdmmc mmc_core
drm_kms_helper crct10dif_pclmul mxm_wmi crc32_pclmul nvme crc32c_intel
drm rtsx_pci intel_ish_ipc nvme_core ghash_clmulni_intel serio_raw
intel_ishtp i2c_hid wmi video pinctrl_sunrisepoint pinctrl_intel fuse
[ 309.922937] CPU: 2 PID: 5230 Comm: Xorg Tainted: G W OE
5.3.16-300.fc31.x86_64 #1
[ 309.922938] Hardware name: HP HP Spectre x360 Convertible
15-ch0xx/83BA, BIOS F.04 01/23/2018
[ 309.922964] RIP: 0010:g84_bar_flush+0xcf/0xe0 [nouveau]
[ 309.922966] Code: 8b 40 10 48 8b 78 10 4c 8b 6f 50 4d 85 ed 75 03 4c
8b 2f e8 c3 a9 fd e9 4c 89 ea 48 c7 c7 68 86 83 c0 48 89 c6 e8 0f b2 a5
e9 <0f> 0b eb a7 e8 28 af a5 e9 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
[ 309.922967] RSP: 0018:ffffb44e83e03720 EFLAGS: 00010082
[ 309.922968] RAX: 0000000000000000 RBX: ffff9d5fb408f800 RCX:
0000000000000006
[ 309.922969] RDX: 0000000000000007 RSI: 0000000000000086 RDI:
ffff9d5fbea97900
[ 309.922970] RBP: ffff9d5fbab2fd48 R08: 0000000000000001 R09:
000000000000231a
[ 309.922970] R10: 0000000000011488 R11: 0000000000000003 R12:
0000000000000246
[ 309.922971] R13: ffff9d5fbb90fed0 R14: ffff9d5f6fb2b600 R15:
ffff9d5f6fb2b600
[ 309.922973] FS: 00007f8628b69f00(0000) GS:ffff9d5fbea80000(0000)
knlGS:0000000000000000
[ 309.922973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 309.922974] CR2: 00007f862640c000 CR3: 000000044e3f6005 CR4:
00000000003606e0
[ 309.922975] Call Trace:
[ 309.923011] nv50_instobj_release+0x2f/0xc0 [nouveau]
[ 309.923049] nvkm_vmm_iter.constprop.0+0x2bc/0x810 [nouveau]
[ 309.923086] ? nvkm_vmm_sparse_unref_ptes+0x70/0x70 [nouveau]
[ 309.923123] ? gp100_vmm_pgt_pfn+0x180/0x180 [nouveau]
[ 309.923162] nvkm_vmm_ptes_get_map+0x2e/0x70 [nouveau]
[ 309.923198] ? nvkm_vmm_sparse_unref_ptes+0x70/0x70 [nouveau]
[ 309.923247] ? gp100_vmm_pgt_pfn+0x180/0x180 [nouveau]
[ 309.923281] nvkm_vmm_map+0x1cf/0x360 [nouveau]
[ 309.923311] nvkm_vram_map+0x56/0x80 [nouveau]
[ 309.923346] nvkm_uvmm_mthd+0x66a/0x780 [nouveau]
[ 309.923371] nvkm_ioctl+0xde/0x180 [nouveau]
[ 309.923404] ? nvkm_uvmm_mthd+0x11f/0x780 [nouveau]
[ 309.923428] nvif_object_mthd+0x104/0x130 [nouveau]
[ 309.923451] ? nvif_object_mthd+0x117/0x130 [nouveau]
[ 309.923474] nvif_vmm_map+0x115/0x130 [nouveau]
[ 309.923515] nouveau_mem_map+0x8d/0xf0 [nouveau]
[ 309.923558] nouveau_vma_new+0x1c1/0x1e0 [nouveau]
[ 309.923602] nouveau_gem_object_open+0x138/0x170 [nouveau]
[ 309.923613] drm_gem_handle_create_tail+0xcb/0x150 [drm]
[ 309.923626] ? drm_mode_create_dumb+0x90/0x90 [drm]
[ 309.923667] nouveau_display_dumb_create+0xa3/0xe0 [nouveau]
[ 309.923678] drm_ioctl_kernel+0xaa/0xf0 [drm]
[ 309.923688] drm_ioctl+0x208/0x390 [drm]
[ 309.923700] ? drm_mode_create_dumb+0x90/0x90 [drm]
[ 309.923702] ? rpm_suspend+0x80/0x5a0
[ 309.923744] nouveau_drm_ioctl+0x63/0xb0 [nouveau]
[ 309.923747] do_vfs_ioctl+0x405/0x660
[ 309.923749] ksys_ioctl+0x5e/0x90
[ 309.923750] __x64_sys_ioctl+0x16/0x20
[ 309.923752] do_syscall_64+0x5f/0x1a0
[ 309.923753] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 309.923755] RIP: 0033:0x7f8628fe034b
[ 309.923757] Code: 0f 1e fa 48 8b 05 3d 9b 0c 00 64 c7 00 26 00 00 00
48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d 9b 0c 00 f7 d8 64 89 01 48
[ 309.923758] RSP: 002b:00007ffd25b3c138 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[ 309.923759] RAX: ffffffffffffffda RBX: 00007ffd25b3c170 RCX:
00007f8628fe034b
[ 309.923759] RDX: 00007ffd25b3c170 RSI: 00000000c02064b2 RDI:
0000000000000010
[ 309.923760] RBP: 00000000c02064b2 R08: 0000555c1618e370 R09:
0000555c1618e460
[ 309.923761] R10: 0000000000000000 R11: 0000000000000246 R12:
0000555c1618e370
[ 309.923762] R13: 0000000000000010 R14: 0000000000000020 R15:
0000555c1618ee50
[ 309.923763] ---[ end trace a32afa8b919c6d8f ]---
[ 309.924812] nouveau 0000:01:00.0: tmr: stalled at ffffffffffffffff
[ 309.924814] ------------[ cut here ]------------
[ 309.924815] nouveau 0000:01:00.0: timeout
[ 309.924866] WARNING: CPU: 2 PID: 5230 at
drivers/gpu/drm/nouveau/nvkm/subdev/bar/g84.c:35 g84_bar_flush+0xcf/0xe0
[nouveau]
[ 309.924867] Modules linked in: rfcomm ccm xt_CHECKSUM xt_MASQUERADE
nf_nat_tftp nf_conntrack_tftp tun bridge stp llc nf_conntrack_netbios_ns
nf_conntrack_broadcast xt_CT ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter
ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute
ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat
nf_nat iptable_mangle iptable_raw iptable_security nf_conntrack
nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c ip_set nfnetlink ebtable_filter
ebtables ip6table_filter ip6_tables iptable_filter cmac bnep sunrpc vfat
fat iwlmvm snd_hda_codec_hdmi snd_soc_skl mac80211 snd_soc_hdac_hda
snd_hda_ext_core snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp
snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_soc_core
snd_hda_codec_generic ledtrig_audio snd_compress x86_pkg_temp_thermal
libarc4 ac97_bus intel_powerclamp snd_pcm_dmaengine coretemp
snd_hda_intel kvm_intel snd_hda_codec iwlwifi uvcvideo snd_hda_core
spi_pxa2xx_platform iTCO_wdt dw_dmac
[ 309.924886] iTCO_vendor_support snd_hwdep snd_seq videobuf2_vmalloc
videobuf2_memops hid_multitouch mei_hdcp kvm intel_rapl_msr
snd_seq_device btusb btrtl videobuf2_v4l2 irqbypass snd_pcm btbcm
intel_cstate videobuf2_common btintel intel_uncore snd_timer bluetooth
cfg80211 joydev rtsx_pci_ms intel_rapl_perf videodev snd
intel_wmi_thunderbolt wmi_bmof hp_wmi i2c_i801 soundcore
hid_sensor_magn_3d hid_sensor_incl_3d hid_sensor_rotation
hid_sensor_accel_3d hid_sensor_gyro_3d ecdh_generic hid_sensor_trigger
memstick mc hid_sensor_iio_common rfkill ecc
industrialio_triggered_buffer idma64 mei_me kfifo_buf ucsi_acpi mei
industrialio intel_lpss_pci typec_ucsi processor_thermal_device
intel_lpss intel_pch_thermal intel_xhci_usb_role_switch roles
intel_rapl_common cros_ec_ishtp cros_ec_core intel_soc_dts_iosf typec
int3403_thermal int340x_thermal_zone hp_wireless intel_vbtn
int3400_thermal sparse_keymap acpi_thermal_rel acpi_pad vboxpci(OE)
vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) ip_tables
[ 309.924906] dm_crypt hid_sensor_hub intel_ishtp_loader
intel_ishtp_hid i915 nouveau ttm i2c_algo_bit rtsx_pci_sdmmc mmc_core
drm_kms_helper crct10dif_pclmul mxm_wmi crc32_pclmul nvme crc32c_intel
drm rtsx_pci intel_ish_ipc nvme_core ghash_clmulni_intel serio_raw
intel_ishtp i2c_hid wmi video pinctrl_sunrisepoint pinctrl_intel fuse
[ 309.924916] CPU: 2 PID: 5230 Comm: Xorg Tainted: G W OE
5.3.16-300.fc31.x86_64 #1
[ 309.924917] Hardware name: HP HP Spectre x360 Convertible
15-ch0xx/83BA, BIOS F.04 01/23/2018
[ 309.924943] RIP: 0010:g84_bar_flush+0xcf/0xe0 [nouveau]
[ 309.924945] Code: 8b 40 10 48 8b 78 10 4c 8b 6f 50 4d 85 ed 75 03 4c
8b 2f e8 c3 a9 fd e9 4c 89 ea 48 c7 c7 68 86 83 c0 48 89 c6 e8 0f b2 a5
e9 <0f> 0b eb a7 e8 28 af a5 e9 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
[ 309.924946] RSP: 0018:ffffb44e83e03740 EFLAGS: 00010086
[ 309.924947] RAX: 0000000000000000 RBX: ffff9d5fb408f800 RCX:
0000000000000006
[ 309.924948] RDX: 0000000000000007 RSI: 0000000000000082 RDI:
ffff9d5fbea97900
[ 309.924949] RBP: ffff9d5fbab2fd48 R08: 0000000000000001 R09:
0000000000002357
[ 309.924950] R10: 0000000000012dac R11: 0000000000000003 R12:
0000000000000246
[ 309.924951] R13: ffff9d5fbb90fed0 R14: ffff9d5f7b730600 R15:
0000000000000000
[ 309.924952] FS: 00007f8628b69f00(0000) GS:ffff9d5fbea80000(0000)
knlGS:0000000000000000
[ 309.924953] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 309.924954] CR2: 00007f862640c000 CR3: 000000044e3f6005 CR4:
00000000003606e0
[ 309.924954] Call Trace:
[ 309.924993] nv50_instobj_release+0x2f/0xc0 [nouveau]
[ 309.925031] nvkm_vmm_unref_pdes+0x19c/0x1f0 [nouveau]
[ 309.925071] nvkm_vmm_unref_pdes+0x183/0x1f0 [nouveau]
[ 309.925109] nvkm_vmm_unref_pdes+0x183/0x1f0 [nouveau]
[ 309.925148] nvkm_vmm_unref_pdes+0x183/0x1f0 [nouveau]
[ 309.925184] nvkm_vmm_unref_ptes+0x202/0x240 [nouveau]
[ 309.925221] nvkm_vmm_iter.constprop.0+0x271/0x810 [nouveau]
[ 309.925257] ? nvkm_vmm_map_choose+0x90/0x90 [nouveau]
[ 309.925307] ? gf100_vmm_invalidate_pdb+0x30/0x30 [nouveau]
[ 309.925341] nvkm_vmm_ptes_unmap_put+0x2c/0x40 [nouveau]
[ 309.925376] ? nvkm_vmm_map_choose+0x90/0x90 [nouveau]
[ 309.925411] ? gf100_vmm_invalidate_pdb+0x30/0x30 [nouveau]
[ 309.925446] nvkm_vmm_put_locked+0x1c5/0x210 [nouveau]
[ 309.925482] nvkm_uvmm_mthd+0x4ec/0x780 [nouveau]
[ 309.925498] ? drm_framebuffer_init+0x107/0x110 [drm]
[ 309.925523] nvkm_ioctl+0xde/0x180 [nouveau]
[ 309.925569] ? nouveau_user_framebuffer_create+0x6f/0x90 [nouveau]
[ 309.925591] nvif_object_mthd+0x104/0x130 [nouveau]
[ 309.925604] ? drm_atomic_get_property+0xc0/0x610 [drm]
[ 309.925617] ? drm_internal_framebuffer_create+0x35c/0x4c0 [drm]
[ 309.925642] nvif_vmm_put+0x5c/0x80 [nouveau]
[ 309.925687] nouveau_vma_del+0x70/0xc0 [nouveau]
[ 309.925729] nouveau_gem_object_close+0x206/0x230 [nouveau]
[ 309.925742] drm_gem_object_release_handle+0x35/0xb0 [drm]
[ 309.925756] drm_gem_handle_delete+0x4f/0x80 [drm]
[ 309.925774] ? drm_mode_destroy_dumb+0x40/0x40 [drm]
[ 309.925787] drm_ioctl_kernel+0xaa/0xf0 [drm]
[ 309.925798] drm_ioctl+0x208/0x390 [drm]
[ 309.925812] ? drm_mode_destroy_dumb+0x40/0x40 [drm]
[ 309.925814] ? pm_runtime_autosuspend_expiration.part.0+0x2a/0x40
[ 309.925815] ? rpm_suspend+0x80/0x5a0
[ 309.925859] nouveau_drm_ioctl+0x63/0xb0 [nouveau]
[ 309.925862] do_vfs_ioctl+0x405/0x660
[ 309.925864] ksys_ioctl+0x5e/0x90
[ 309.925865] __x64_sys_ioctl+0x16/0x20
[ 309.925867] do_syscall_64+0x5f/0x1a0
[ 309.925869] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 309.925870] RIP: 0033:0x7f8628fe034b
[ 309.925872] Code: 0f 1e fa 48 8b 05 3d 9b 0c 00 64 c7 00 26 00 00 00
48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d 9b 0c 00 f7 d8 64 89 01 48
[ 309.925873] RSP: 002b:00007ffd25b3c168 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[ 309.925874] RAX: ffffffffffffffda RBX: 00007ffd25b3c1a4 RCX:
00007f8628fe034b
[ 309.925875] RDX: 00007ffd25b3c1a4 RSI: 00000000c00464b4 RDI:
0000000000000010
[ 309.925876] RBP: 00000000c00464b4 R08: 0000000000000020 R09:
0000000000000100
[ 309.925877] R10: 0000000000000001 R11: 0000000000000246 R12:
0000000000000010
[ 309.925877] R13: 0000000000000010 R14: 0000555c15ff1890 R15:
0000555c1618ee50
[ 309.925879] ---[ end trace a32afa8b919c6d90 ]---
[ 309.976504] nouveau 0000:01:00.0: tmr: stalled at ffffffffffffffff
[ 309.976506] ------------[ cut here ]------------
[ 309.976507] nouveau 0000:01:00.0: timeout
[ 309.976568] WARNING: CPU: 2 PID: 5230 at
drivers/gpu/drm/nouveau/nvkm/subdev/bar/g84.c:35 g84_bar_flush+0xcf/0xe0
[nouveau]
[
On 1/22/20 4:03 PM, Joe Zeff wrote:
> On 01/22/2020 04:19 PM, Patrick O'Callaghan wrote:
>> On Wed, 2020-01-22 at 13:27 -0800, Mr Brian Domenick wrote:
>>> I have an Hp Spectre 360 from 2018 with intel integrated graphics. I am
>>> using nouveau driver.
>> AFAIK Nouveau is for Nvidia GPUs, not for Intel integrated graphics.
>
> Yes. If the OP is actually using the nouveau driver, that's probably
> what's causing all the problems.
> _______________________________________________
> users mailing list -- users(a)lists.fedoraproject.org
> To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
> https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
> https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
4 years, 2 months
firefox-72.0.1-1.fc31.x86_64 does nothing
by Sam Varshavchik
Is anyone also having problems with this update.
It does …nothing. Opening any URL results in a brief "connecting", then an
empty page.
dnf downgrade returns me back to 69.0.1, looking for a more recent build in
bodhi…
4 years, 2 months
Re: usb thermometer?
by J.Witvliet@mindef.nl
Regarding power,
You might consider doing poe (power over Ethernet)
Excuses for auto-typo’s
> On 21 Jan 2020, at 23:42, David King <dave(a)daveking.com> wrote:
>
> On 1/20/20 2:17 PM, ToddAndMargo via users wrote:
>>> On 2020-01-20 09:03, David King wrote:
>>> On 1/20/20 1:08 AM, ToddAndMargo via users wrote:
>>>> Hi All,
>>>>
>>>> Is there a such thing as usb thermometer that Fedora
>>>> can read? And be able to be place a ways away from
>>>> the computer so the computer's heat will not throw
>>>> it off?
>>> It's not USB-based like you asked for, but I wanted a temperature and
>>> humidity sensor I could place anywhere in the house and which could be
>>> read by my computer. My solution was to buy a Raspebrry Pi 3 Model B+
>>> and a humidity sensor that plugs into its IO pins. That's ~$40 total
>>> cost. Now I have a little computer that reads the temp and humidity
>>> anywhere I put it (it communicates via my wifi) and makes those readings
>>> available through a web service on my home network that any other
>>> computer can query. I could provide more details if this interests you
>>> (outside the list, as this would be way off-topic for this list.) It's
>>> pretty simple to do, simpler than the web tutorials I found make it out
>>> to be. They're all pretty out-of-date when it comes to the software
>>> setup involved. That's gotten dead simple now.
>>>
>>> Dave
>>>
>>> David King
>>> dave at daveking dot com
>>
>> Not what I was after, but I am interested anyway. I
>> have had plumbing lines leak under the house before.
>>
>> How do you keep it charged?
>
> This humidity sensor I'm using is for relative humidity in the air, not
> for water leaks. There are probably better wireless water leak
> detectors out there. To answer your question, the Raspberry Pi isn't
> battery powered but I suppose it could be. They run off USB power,
> i.e., 5VDC at various amperages depending on the model. The one I'm
> using for this application needs 2 amps. I run it off an extra cell
> phone charger I had laying around. So, I assume one could probably use
> one of those mobile phone charging backup batteries that are on the
> market to make it battery powered. Not sure what the run time would be
> on one of those however.
>
> I just made a post on my wiki describing what I built ->
> http://bit.ly/37hOLu6
>
> Dave
>
> David King
> dave at daveking dot com
> _______________________________________________
> users mailing list -- users(a)lists.fedoraproject.org
> To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De Staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten.
This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The State accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.
4 years, 2 months
abrt problem reporting shows nothing
by Neal Becker
gnome-abrt shows no problems, but /var/spool/abrt has a whole bunch of
directories, including many created today.
Fedora31, fully updated.
4 years, 2 months
Re: Problems connecting to VM via ssh (Ed Greshko)
by George R Goffe
Ed,
Thanks for responding to my question.
Yes. The host AND guest are both fc32 x86_64 (rawhide). I forgot to put the rawhide in.
Apparently tstusr is a "dup" of root. I guess it was late when I did this. Anyway. I can login as root and tstusr at the console. I can su to root from tstusr and su to tstusr from root.
The problem is ssh from my host to the VM.
I noticed that the tty type(?) is "ssh". Is it possible that the system does not think "ssh" is a secure tty? I think earlier FC systems had a file containing "secure" device types... "stty" comes to mind.
I have made a different non-root userid and am seeing the same behavior... namely, the "client-loop: send disconnect: Broken pipe" message.
I'm not sure what to do here. Do you have any ideas? Do you need files?
Again, thanks for your help.
George...
4 years, 3 months
usb thermometer?
by ToddAndMargo
Hi All,
Is there a such thing as usb thermometer that Fedora
can read? And be able to be place a ways away from
the computer so the computer's heat will not throw
it off?
Many thanks,
-T
4 years, 3 months
Problems connecting to VM via ssh
by George R Goffe
Hi,
I just installed a Fedora Core 32 (x86_64) system in a VM running under VirtualBox and am trying to ssh into the VM.
When I try to login I get a "client_loop: send disconnect: Broken pipe" message for my trouble.
This is what I'm getting from the client side:
ssh -v tstusr(a)10.28.0.4OpenSSH_8.1p1, OpenSSL 1.1.1d FIPS 10 Sep 2019
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Reading configuration data /etc/ssh/ssh_config.d/05-redhat.conf
debug1: Reading configuration data /etc/crypto-policies/back-ends/openssh.config
debug1: configuration requests final Match pass
debug1: re-parsing configuration
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Reading configuration data /etc/ssh/ssh_config.d/05-redhat.conf
debug1: Reading configuration data /etc/crypto-policies/back-ends/openssh.config
debug1: Connecting to 10.28.0.4 [10.28.0.4] port 22.
debug1: Connection established.
debug1: identity file /root/.ssh/id_rsa type 0
debug1: identity file /root/.ssh/id_rsa-cert type -1
debug1: identity file /root/.ssh/id_dsa type -1
debug1: identity file /root/.ssh/id_dsa-cert type -1
debug1: identity file /root/.ssh/id_ecdsa type -1
debug1: identity file /root/.ssh/id_ecdsa-cert type -1
debug1: identity file /root/.ssh/id_ed25519 type -1
debug1: identity file /root/.ssh/id_ed25519-cert type -1
debug1: identity file /root/.ssh/id_xmss type -1
debug1: identity file /root/.ssh/id_xmss-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_8.1
debug1: Remote protocol version 2.0, remote software version OpenSSH_8.1
debug1: match: OpenSSH_8.1 pat OpenSSH* compat 0x04000000
debug1: Authenticating to 10.28.0.4:22 as 'tstusr'debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: algorithm: curve25519-sha256
debug1: kex: host key algorithm: ecdsa-sha2-nistp256
debug1: kex: server->client cipher: aes256-gcm(a)openssh.com MAC: <implicit> compression: none
debug1: kex: client->server cipher: aes256-gcm(a)openssh.com MAC: <implicit> compression: none
debug1: kex: curve25519-sha256 need=32 dh_need=32
debug1: kex: curve25519-sha256 need=32 dh_need=32
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ecdsa-sha2-nistp256 SHA256:Zev/Nfqn4njKOb+9dcqBPNx0mB6lQ1yU1PKtczqAsA4
debug1: Host '10.28.0.4' is known and matches the ECDSA host key.
debug1: Found key in /root/.ssh/known_hosts:1
debug1: rekey out after 4294967296 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: rekey in after 4294967296 blocks
debug1: Will attempt key: /root/.ssh/id_rsa RSA SHA256:cyK/ngBTJrk8VT2LY7SBAJnYeRrEG+QEldmMd76ANDg
debug1: Will attempt key: /root/.ssh/id_dsa
debug1: Will attempt key: /root/.ssh/id_ecdsa
debug1: Will attempt key: /root/.ssh/id_ed25519
debug1: Will attempt key: /root/.ssh/id_xmss
debug1: SSH2_MSG_EXT_INFO received
debug1: kex_input_ext_info: server-sig-algs=<ssh-ed25519,ssh-rsa,rsa-sha2-256,rsa-sha2-512,ssh-dss,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521>
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive
debug1: Next authentication method: gssapi-with-mic
debug1: Unspecified GSS failure. Minor code may provide more information
No Kerberos credentials available (default cache: KCM:)
debug1: Unspecified GSS failure. Minor code may provide more information
No Kerberos credentials available (default cache: KCM:)
debug1: Next authentication method: publickey
debug1: Offering public key: /root/.ssh/id_rsa RSA SHA256:cyK/ngBTJrk8VT2LY7SBAJnYeRrEG+QEldmMd76ANDg
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive
debug1: Trying private key: /root/.ssh/id_dsa
debug1: Trying private key: /root/.ssh/id_ecdsa
debug1: Trying private key: /root/.ssh/id_ed25519
debug1: Trying private key: /root/.ssh/id_xmss
debug1: Next authentication method: keyboard-interactive
Password:
debug1: Authentication succeeded (keyboard-interactive).
Authenticated to 10.28.0.4 ([10.28.0.4]:22).
debug1: channel 0: new [client-session]
debug1: Requesting no-more-sessions(a)openssh.com
debug1: Entering interactive session.
debug1: pledge: exec
Running the server with the '-d' switch creates a log that I can't get but the last two lines are:
debug1: PAM establishing credentialsPAM: pam_setcred(): Failure setting user credentials
I'm afraid I've done something dumb but can't seem to see it.
Can someone help me with this problem please?
Best regards,
George...
4 years, 3 months
Best way to replicate the installation of an old computer onto a new one
by Paul Smith
Dear All,
I have got a new computer (processor AMD with 8 cores), which has 1TB
SSD disk and a 2TB HDD disk. My old computer has only a 2TB HDD disk
running Fedora 31 (x86_64).
What is the best way to replicate the installation of my old computer
onto my new one?
Thanks in advance,
Paul
4 years, 3 months