[f30] Latest wine breaks Adobe Digital Editions 2
by Marco Guazzone
Hello,
I am running Fedora 30 x86_64.
After upgrading wine from v. 4.5.1 to v. 4.13.5 (and wine-mono from v.
4.8.0 to v. 4.9.0), from the Fedora's updates repo, the Adobe Digital
Editions 2.0.1 stopped working.
Does anyone else experienced this problem (and found a workaround)?
Thanks,
Marco
4 years, 8 months
WiFi keeps locking up
by SternData
I still seem to be connected, but nothing works. To recover, I have to
shut off WiFi then re-enable it
Aug 15 13:01:03 sds-desk wpa_supplicant[1244]: wlp3s0: SME: Trying to
authenticate with b0:39:56:89:67:70 (SSID='bandit' freq=5200 MHz)
Aug 15 13:01:03 sds-desk kernel: wlp3s0: disconnect from AP
9c:3d:cf:7f:dc:9b for new auth to b0:39:56:89:67:70
Aug 15 13:01:04 sds-desk kernel: wlp3s0: authenticate with b0:39:56:89:67:70
Aug 15 13:01:04 sds-desk kernel: wlp3s0: send auth to b0:39:56:89:67:70
(try 1/3)
Aug 15 13:01:04 sds-desk NetworkManager[1088]: <info> [1565892064.0138]
device (wlp3s0): supplicant interface state: completed -> authenticating
Aug 15 13:01:04 sds-desk NetworkManager[1088]: <info> [1565892064.0139]
device (p2p-dev-wlp3s0): supplicant management interface state:
completed -> authenticating
Aug 15 13:01:04 sds-desk kernel: wlp3s0: authenticated
Aug 15 13:01:04 sds-desk wpa_supplicant[1244]: wlp3s0:
CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
Aug 15 13:01:04 sds-desk wpa_supplicant[1244]: wlp3s0:
CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=US
Aug 15 13:01:04 sds-desk wpa_supplicant[1244]: wlp3s0: Trying to
associate with b0:39:56:89:67:70 (SSID='bandit' freq=5200 MHz)
Aug 15 13:01:04 sds-desk kernel: wlp3s0: associate with
b0:39:56:89:67:70 (try 1/3)
Aug 15 13:01:04 sds-desk NetworkManager[1088]: <info> [1565892064.0413]
device (wlp3s0): supplicant interface state: authenticating -> associating
Aug 15 13:01:04 sds-desk NetworkManager[1088]: <info> [1565892064.0414]
device (p2p-dev-wlp3s0): supplicant management interface state:
authenticating -> associating
Aug 15 13:01:04 sds-desk kernel: wlp3s0: RX ReassocResp from
b0:39:56:89:67:70 (capab=0x1511 status=0 aid=3)
Aug 15 13:01:04 sds-desk kernel: wlp3s0: associated
Aug 15 13:01:04 sds-desk wpa_supplicant[1244]: dbus:
wpa_dbus_property_changed: no property SessionLength in object
/fi/w1/wpa_supplicant1/Interfaces/2
Aug 15 13:01:04 sds-desk wpa_supplicant[1244]: wlp3s0: Associated with
b0:39:56:89:67:70
Aug 15 13:01:04 sds-desk wpa_supplicant[1244]: wlp3s0:
CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
Aug 15 13:01:04 sds-desk wpa_supplicant[1244]: wlp3s0:
CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=US
Aug 15 13:01:04 sds-desk NetworkManager[1088]: <info> [1565892064.1250]
device (wlp3s0): supplicant interface state: associating -> associated
Aug 15 13:01:04 sds-desk NetworkManager[1088]: <info> [1565892064.1250]
device (p2p-dev-wlp3s0): supplicant management interface state:
associating -> associated
Aug 15 13:01:04 sds-desk NetworkManager[1088]: <info> [1565892064.1356]
device (wlp3s0): supplicant interface state: associated -> 4-way handshake
Aug 15 13:01:04 sds-desk NetworkManager[1088]: <info> [1565892064.1357]
device (p2p-dev-wlp3s0): supplicant management interface state:
associated -> 4-way handshake
Aug 15 13:01:04 sds-desk wpa_supplicant[1244]: wlp3s0: WPA: Key
negotiation completed with b0:39:56:89:67:70 [PTK=CCMP GTK=CCMP]
Aug 15 13:01:04 sds-desk wpa_supplicant[1244]: dbus:
wpa_dbus_property_changed: no property RoamTime in object
/fi/w1/wpa_supplicant1/Interfaces/2
Aug 15 13:01:04 sds-desk wpa_supplicant[1244]: dbus:
wpa_dbus_property_changed: no property RoamComplete in object
/fi/w1/wpa_supplicant1/Interfaces/2
Aug 15 13:01:04 sds-desk wpa_supplicant[1244]: wlp3s0:
CTRL-EVENT-CONNECTED - Connection to b0:39:56:89:67:70 completed [id=0
id_str=]
Aug 15 13:01:04 sds-desk NetworkManager[1088]: <info> [1565892064.1487]
device (wlp3s0): supplicant interface state: 4-way handshake -> completed
Aug 15 13:01:04 sds-desk NetworkManager[1088]: <info> [1565892064.1494]
device (p2p-dev-wlp3s0): supplicant management interface state: 4-way
handshake -> completed
Aug 15 13:01:09 sds-desk org.kde.amarok.desktop[2612]: Calling
appendChild() on a null node does nothing.
Aug 15 13:01:13 sds-desk wpa_supplicant[1244]: wlp3s0:
CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-49 noise=-94 txrate=6000
Aug 15 13:02:07 sds-desk journal[1878]: Failed to query location:
Connection terminated unexpectedly
--
-- Steve
4 years, 8 months
OSS Community Innovation Capability Research Invitation based in
University of Leeds
by Sophy Guo
Dear Fedora Community Members,
I am a master student based in the University of Leeds (UK), currently
conducting a research in regards to investigating how open source software
community culture, governance and structure, motivation of participation
influence the innovation capability of OSS community. I found Fedora
community is very active and supportive with members around the world,
which makes it perfect for this research. I am writing to ask if you could
help to take part in this research for more accurate results.
This research data is to be collected via questionnaire with the anonymous
link below:
https://leedsubs.eu.qualtrics.com/jfe/form/SV_cUPSObEbxQqEX1b
The questionnaire should take you 5-10 minutes to complete. Your
participation is very important to disclose the relationship between
community culture, governance structure, motivation of participation and
the innovation capability of OSS community.
I would very much appreciate if you could help to participate this
research, and if you have any questions about the research, I am happy to
answer, just e-mail me on bn18xg(a)leeds.ac.uk. Thanks a lot!
Best Regards,
Sophy Guo
4 years, 8 months
Unable to bring up Vagrant guest after upgrade to Fedora 30
by Sudheer S
Hello,
I recently upgraded from Fedora 29 to Fedora 30.
I am unable to bring up a Vagrant guest.
vagrant up
Bringing machine 'default' up with 'libvirt' provider...
Name `centos7_default` of domain about to create is already taken.
Please try to run
`vagrant up` command again.
I launched the Virtual Machine Manager GUI and the guest is not listed
there.
I try to find it via virsh: virsh list --all
the guest is not listed.
I try to remove it by using virsh:
virsh undefine centos7_default
error: failed to get domain 'centos7_default'
The machine is not there.
How can I bring the guest OS up? Where is Vagrant looking up the names?
Here's the status of the machine:
vagrant status
Current machine states:
default not created (libvirt)
The Libvirt domain is not created. Run `vagrant up` to create it.
-
Sudheer S
4 years, 8 months
Nouveau crashes
by Javier Perez
Hi.
I have been a long life fan of Nvidia cards.
A few years ago I decided to skip the nvidia drivers and go with the
nouveau drivers. So far so good, but they tend to freeze the desktop every
few days.
Lately after upgrading to F30, the desktop freezes daily or more.
It is more annoying than anything else. I can ssh from another computer
usually and restart display-manager, but I lose whatever I am working at at
the moment.
I have opened up a couple of bug reports on bugzilla with extracts from the
log.
My question is this. If I change to Radeon, how is the experience with
those cards? Is the linux driver for these cards fine?
I am not a heavy game player, mostly web browsing, and lately FreeCAD,
Meshmixer though wine, PlayonLinux, user. Probably will get into Blender,
therefore I might need a good video card, but not something top notch, I
think.
Thx
--
------------------------------
/\_/\
|O O| pepebuho(a)gmail.com
~~~~ Javier Perez
~~~~ While the night runs
~~~~ toward the day...
m m Pepebuho watches
from his high perch.
4 years, 8 months
Viewing videos in Chrome crashes gnome shell
by SternData
I'm totally unable to track this down and when I try to report the
gnome-shell crash, I get an error that ureport is unable to read the
crash file.
Am I the only one with this error?
Any tips on how to debug this?
--
-- Steve
4 years, 8 months
Ban a specific mirror in dnf
by Suvayu Ali
Hi,
I would like to ban a particularly slow mirror[1]. It's the closest
mirror to my geographical location (one of only two mirrors in my
country, India). Every time I see a bad download error message from
that mirror, everything subsequent to that speeds up and uses the full
capacity of my connection. How can I achieve this?
Also, is there a way to report this? Mirrormanager shouldn't even be
listing this mirror, it considerably degrades the user experience.
Thanks,
[1] Ironically it is hosted by the CS department at IIT Kanpur!
--
Suvayu
Open source is the future. It sets us free.
4 years, 8 months
xfce live iso
by ToddAndMargo
Hi All,
Anyone know who maintains the Xfce Live ISO
for Fedora 30? Xfce 4.14 is about it hit an
a few days and a fresh spin would be capitol!
Many thanks,
-T
4 years, 8 months