Strange output whenever "sh -xv" is used on FC31 x86_64 (rawhide)
by George R Goffe
Hi,
I have been seeing the enclosed lines PLUS a lot more (several pages worth). Can anyone tell me which package they come from and/or how to eliminate them please?
Best regards,
George...
switchml () { typeset swfound=1;
if [ "${MODULES_USE_COMPAT_VERSION:-0}" = '1' ]; then
typeset swname='main';
if [ -e /usr/share/Modules/libexec/modulecmd.tcl ]; then
typeset swfound=0;
unset MODULES_USE_COMPAT_VERSION;
fi;
else
4 years, 4 months
Fedora 30 no boot -
by Bob Goodwin
I saw that Fedora-30 was driving one cpu to 100% continuously and top
showed dnfdragora was the cause so I dnf removed dnfdragora, a bad move
as it turns out overthought it has always been a useless appendage for
me you are punished for killing it.
After a number of tries I finally have that system in "maintenance mode"
but I find it to be limited in the commands it can use and I don't know
what to do next. I tried ssh from this box but no connection that way.
And the screen presentation is in very small difficult to read font that
I must use a hand magnifier to read.
That computer also has Fedora-31 on another drive, I select the system I
want from the boot menu ...
I don't really need Fedora-30 any more but I would like to fix the
damage so any suggestions would be helpful.
Bob
--
Bob Goodwin - Zuni, Virginia,
Fedora Linux-31 XFCE
4 years, 4 months
More FC31 woes : X won't start
by Sean Darcy
I've upgrade another machine to FC31, and have another problem. X won't start.
Here's Xorg.0.log. Nothing obvious to me.
Any help appreciated.
sean
X.Org X Server 1.20.6
X Protocol Version 11, Revision 0
[ 3347.582] Build Operating System: 5.0.6-200.fc29.x86_64
[ 3347.585] Current Operating System: Linux localhost.localdomain
5.3.14-300.fc31.x86_64 #1 SMP Mon Dec 2 15:41:35 UTC 2019 x86_64
[ 3347.585] Kernel command line:
BOOT_IMAGE=(hd0,msdos5)/boot/vmlinuz-5.3.14-300.fc31.x86_64
root=UUID=596f6863-45ea-48b1-aa86-21608f0cfae8 ro
resume=UUID=65dd4576-945f-4e38-8315-70105463250f
[ 3347.591] Build Date: 25 November 2019 12:00:00AM
[ 3347.595] Build ID: xorg-x11-server 1.20.6-1.fc31
[ 3347.598] Current version of pixman: 0.38.4
[ 3347.604] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3347.604] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3347.615] (==) Log file:
"/home/asterisk/.local/share/xorg/Xorg.0.log", Time: Tue Dec 10
18:13:22 2019
[ 3347.618] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3347.621] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3347.623] (==) No Layout section. Using the first Screen section.
[ 3347.623] (==) No screen section available. Using defaults.
[ 3347.623] (**) |-->Screen "Default Screen Section" (0)
[ 3347.623] (**) | |-->Monitor "<default monitor>"
[ 3347.625] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3347.625] (==) Automatically adding devices
[ 3347.625] (==) Automatically enabling devices
[ 3347.625] (==) Automatically adding GPU devices
[ 3347.625] (==) Automatically binding GPU devices
[ 3347.626] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3347.626] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 3347.626] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 3347.626] (II) The server relies on udev to provide the list of
input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3347.626] (II) Loader magic: 0x562982d44e20
[ 3347.626] (II) Module ABI versions:
[ 3347.626] X.Org ANSI C Emulation: 0.4
[ 3347.626] X.Org Video Driver: 24.0
[ 3347.626] X.Org XInput driver : 24.1
[ 3347.626] X.Org Server Extension : 10.0
[ 3347.628] (++) using VT number 1
[ 3347.634] (II) systemd-logind: took control of session
/org/freedesktop/login1/session/_31
[ 3347.636] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3347.638] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[ 3347.644] (--) PCI:*(0@0:1:0) 1002:9647:1179:fc62 rev 0, Mem @
0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256, BIOS @
0x????????/65536
[ 3347.645] (II) LoadModule: "glx"
[ 3347.645] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 3347.660] (II) Module glx: vendor="X.Org Foundation"
[ 3347.660] compiled for 1.20.6, module version = 1.0.0
[ 3347.660] ABI class: X.Org Server Extension, version 10.0
[ 3347.661] (II) Applying OutputClass "Radeon" to /dev/dri/card0
[ 3347.661] loading driver: radeon
[ 3347.661] (==) Matched radeon as autoconfigured driver 0
[ 3347.661] (==) Matched ati as autoconfigured driver 1
[ 3347.661] (==) Matched modesetting as autoconfigured driver 2
[ 3347.661] (==) Matched fbdev as autoconfigured driver 3
[ 3347.661] (==) Matched vesa as autoconfigured driver 4
[ 3347.661] (==) Assigned the driver to the xf86ConfigLayout
[ 3347.661] (II) LoadModule: "radeon"
[ 3347.661] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[ 3347.668] (II) Module radeon: vendor="X.Org Foundation"
[ 3347.668] compiled for 1.20.5, module version = 19.0.1
[ 3347.668] Module class: X.Org Video Driver
[ 3347.668] ABI class: X.Org Video Driver, version 24.0
[ 3347.668] (II) LoadModule: "ati"
[ 3347.668] (II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so
[ 3347.669] (II) Module ati: vendor="X.Org Foundation"
[ 3347.669] compiled for 1.20.5, module version = 19.0.1
[ 3347.669] Module class: X.Org Video Driver
[ 3347.669] ABI class: X.Org Video Driver, version 24.0
[ 3347.669] (II) LoadModule: "modesetting"
[ 3347.669] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 3347.671] (II) Module modesetting: vendor="X.Org Foundation"
[ 3347.671] compiled for 1.20.6, module version = 1.20.6
[ 3347.671] Module class: X.Org Video Driver
[ 3347.671] ABI class: X.Org Video Driver, version 24.0
[ 3347.671] (II) LoadModule: "fbdev"
[ 3347.671] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 3347.672] (II) Module fbdev: vendor="X.Org Foundation"
[ 3347.672] compiled for 1.20.5, module version = 0.5.0
[ 3347.672] Module class: X.Org Video Driver
[ 3347.672] ABI class: X.Org Video Driver, version 24.0
[ 3347.672] (II) LoadModule: "vesa"
[ 3347.672] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 3347.673] (II) Module vesa: vendor="X.Org Foundation"
[ 3347.673] compiled for 1.20.5, module version = 2.4.0
[ 3347.673] Module class: X.Org Video Driver
[ 3347.673] ABI class: X.Org Video Driver, version 24.0
[ 3347.673] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
ATI Radeon 9800PRO, ATI Radeon 9800XT,
ATI Radeon Mobility 9600/9700 (M10/M11),
ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
ATI FireGL V3350, ATI Mobility Radeon X1450,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
ATI FireGL V3400, ATI Mobility FireGL V5250,
ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
MULLINS, KAVERI, HAWAII
[ 3347.677] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 3347.677] (II) FBDEV: driver for framebuffer: fbdev
[ 3347.677] (II) VESA: driver for VESA chipsets: vesa
[ 3347.677] xf86EnableIOPorts: failed to set IOPL for I/O (Operation
not permitted)
[ 3347.677] (II) [KMS] Kernel modesetting enabled.
[ 3347.677] (WW) Falling back to old probe method for modesetting
[ 3347.677] (WW) Falling back to old probe method for fbdev
[ 3347.677] (II) Loading sub module "fbdevhw"
[ 3347.677] (II) LoadModule: "fbdevhw"
[ 3347.677] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 3347.679] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 3347.679] compiled for 1.20.6, module version = 0.0.2
[ 3347.679] ABI class: X.Org Video Driver, version 24.0
[ 3347.679] (EE) open /dev/fb0: Permission denied
[ 3347.679] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 3347.679] (II) RADEON(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3347.679] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 3347.679] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes
(32 bpp pixmaps)
[ 3347.679] (==) RADEON(0): Default visual is TrueColor
[ 3347.679] (==) RADEON(0): RGB weight 888
[ 3347.679] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 3347.679] (--) RADEON(0): Chipset: "SUMO" (ChipID = 0x9647)
[ 3347.679] (II) Loading sub module "fb"
[ 3347.679] (II) LoadModule: "fb"
[ 3347.680] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 3347.681] (II) Module fb: vendor="X.Org Foundation"
[ 3347.681] compiled for 1.20.6, module version = 1.0.0
[ 3347.681] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3347.681] (II) Loading sub module "dri2"
[ 3347.681] (II) LoadModule: "dri2"
[ 3347.681] (II) Module "dri2" already built-in
[ 3348.032] (II) Loading sub module "glamoregl"
[ 3348.032] (II) LoadModule: "glamoregl"
[ 3348.033] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 3348.048] (II) Module glamoregl: vendor="X.Org Foundation"
[ 3348.048] compiled for 1.20.6, module version = 1.0.1
[ 3348.048] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3348.103] (II) RADEON(0): glamor X acceleration enabled on AMD SUMO
(DRM 2.50.0 / 5.3.14-300.fc31.x86_64, LLVM 9.0.0)
[ 3348.103] (II) RADEON(0): glamor detected, initialising EGL layer.
[ 3348.103] (II) RADEON(0): KMS Color Tiling: enabled
[ 3348.103] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 3348.103] (==) RADEON(0): TearFree property default: auto
[ 3348.103] (II) RADEON(0): KMS Pageflipping: enabled
[ 3348.126] (II) RADEON(0): Output VGA-0 has no monitor section
[ 3348.150] (II) RADEON(0): Output LVDS has no monitor section
[ 3348.151] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 3348.151] (WW) RADEON(0): 3 ZaphodHeads crtcs unavailable. Some
outputs will stay off.
[ 3348.174] (II) RADEON(0): EDID for output VGA-0
[ 3348.198] (II) RADEON(0): EDID for output LVDS
[ 3348.198] (II) RADEON(0): Manufacturer: AUO Model: 139e Serial#: 0
[ 3348.198] (II) RADEON(0): Year: 2010 Week: 1
[ 3348.198] (II) RADEON(0): EDID Version: 1.3
[ 3348.198] (II) RADEON(0): Digital Display Input
[ 3348.198] (II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 3348.198] (II) RADEON(0): Gamma: 2.20
[ 3348.198] (II) RADEON(0): No DPMS capabilities specified
[ 3348.198] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3348.198] (II) RADEON(0): First detailed timing is preferred mode
[ 3348.198] (II) RADEON(0): redX: 0.620 redY: 0.340 greenX: 0.325
greenY: 0.570
[ 3348.198] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313
whiteY: 0.329
[ 3348.198] (II) RADEON(0): Manufacturer's mask: 0
[ 3348.198] (II) RADEON(0): Supported detailed timing:
[ 3348.198] (II) RADEON(0): clock: 108.0 MHz Image Size: 382 x 214 mm
[ 3348.198] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end
1680 h_blank_end 1970 h_border: 0
[ 3348.198] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end
909 v_blanking: 912 v_border: 0
[ 3348.198] (II) RADEON(0): Unknown vendor-specific block f
[ 3348.198] (II) RADEON(0): AUO
[ 3348.198] (II) RADEON(0): B173RW01 V3
[ 3348.198] (II) RADEON(0): EDID (in hex):
[ 3348.198] (II) RADEON(0): 00ffffffffffff0006af9e1300000000
[ 3348.198] (II) RADEON(0): 01140103802615780ac4959e57539226
[ 3348.198] (II) RADEON(0): 0f505400000001010101010101010101
[ 3348.198] (II) RADEON(0): 010101010101302a407261840c303020
[ 3348.198] (II) RADEON(0): 36007ed6100000180000000f00000000
[ 3348.198] (II) RADEON(0): 00000000000000000020000000fe0041
[ 3348.198] (II) RADEON(0): 554f0a202020202020202020000000fe
[ 3348.199] (II) RADEON(0): 004231373352573031205633200a000b
[ 3348.199] (II) RADEON(0): Printing probed modes for output LVDS
[ 3348.199] (II) RADEON(0): Modeline "1600x900"x60.1 108.00 1600
1648 1680 1970 900 903 909 912 -hsync -vsync (54.8 kHz eP)
[ 3348.199] (II) RADEON(0): Modeline "1440x900"x60.0 106.68 1440
1528 1672 1904 900 903 909 934 -hsync +vsync (56.0 kHz)
[ 3348.199] (II) RADEON(0): Modeline "1280x854"x60.0 89.34 1280
1352 1480 1680 854 857 867 887 -hsync +vsync (53.2 kHz)
[ 3348.199] (II) RADEON(0): Modeline "1280x800"x60.0 83.71 1280
1352 1480 1680 800 803 809 831 -hsync +vsync (49.8 kHz)
[ 3348.199] (II) RADEON(0): Modeline "1280x720"x60.0 74.65 1280
1344 1472 1664 720 723 728 748 -hsync +vsync (44.9 kHz)
[ 3348.199] (II) RADEON(0): Modeline "1152x768"x59.9 71.95 1152
1216 1328 1504 768 771 781 798 -hsync +vsync (47.8 kHz)
[ 3348.199] (II) RADEON(0): Modeline "1024x768"x59.9 63.53 1024
1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 3348.199] (II) RADEON(0): Modeline "800x600"x60.0 38.31 800 832
912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 3348.199] (II) RADEON(0): Modeline "848x480"x59.9 31.65 848 872
952 1056 480 483 493 500 -hsync +vsync (30.0 kHz)
[ 3348.199] (II) RADEON(0): Modeline "720x480"x59.9 26.85 720 744
808 896 480 483 493 500 -hsync +vsync (30.0 kHz)
[ 3348.199] (II) RADEON(0): Modeline "640x480"x59.9 23.98 640 664
720 800 480 483 487 500 -hsync +vsync (30.0 kHz)
[ 3348.200] (II) RADEON(0): EDID for output HDMI-0
[ 3348.200] (II) RADEON(0): Output VGA-0 disconnected
[ 3348.200] (II) RADEON(0): Output LVDS connected
[ 3348.200] (II) RADEON(0): Output HDMI-0 disconnected
[ 3348.200] (II) RADEON(0): Using exact sizes for initial modes
[ 3348.200] (II) RADEON(0): Output LVDS using initial mode 1600x900 +0+0
[ 3348.200] (II) RADEON(0): mem size init: gart size :3fdde000 vram
size: s:20000000 visible:f715000
[ 3348.200] (==) RADEON(0): DPI set to (96, 96)
[ 3348.200] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3348.200] (II) Loading sub module "ramdac"
[ 3348.200] (II) LoadModule: "ramdac"
[ 3348.200] (II) Module "ramdac" already built-in
[ 3348.200] (II) UnloadModule: "modesetting"
[ 3348.200] (II) Unloading modesetting
[ 3348.200] (II) UnloadModule: "fbdev"
[ 3348.200] (II) Unloading fbdev
[ 3348.201] (II) UnloadSubModule: "fbdevhw"
[ 3348.201] (II) Unloading fbdevhw
[ 3348.201] (II) UnloadModule: "vesa"
[ 3348.201] (II) Unloading vesa
[ 3348.202] (II) RADEON(0): [DRI2] Setup complete
[ 3348.202] (II) RADEON(0): [DRI2] DRI driver: r600
[ 3348.202] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 3348.202] (II) RADEON(0): Front buffer size: 5625K
[ 3348.202] (II) RADEON(0): VRAM usage limit set to 222619K
[ 3348.203] (II) RADEON(0): SYNC extension fences enabled
[ 3348.204] (II) RADEON(0): Present extension enabled
[ 3348.204] (==) RADEON(0): DRI3 enabled
[ 3348.204] (==) RADEON(0): Backing store enabled
[ 3348.204] (II) RADEON(0): Direct rendering enabled
[ 3348.214] (II) RADEON(0): Use GLAMOR acceleration.
[ 3348.214] (II) RADEON(0): Acceleration enabled
[ 3348.214] (==) RADEON(0): DPMS enabled
[ 3348.214] (==) RADEON(0): Silken mouse enabled
[ 3348.214] (II) RADEON(0): Set up textured video (glamor)
[ 3348.215] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video.
[ 3348.215] (II) RADEON(0): [XvMC] Extension initialized.
[ 3348.216] (II) Initializing extension Generic Event Extension
[ 3348.216] (II) Initializing extension SHAPE
[ 3348.216] (II) Initializing extension MIT-SHM
[ 3348.217] (II) Initializing extension XInputExtension
[ 3348.217] (II) Initializing extension XTEST
[ 3348.218] (II) Initializing extension BIG-REQUESTS
[ 3348.218] (II) Initializing extension SYNC
[ 3348.218] (II) Initializing extension XKEYBOARD
[ 3348.219] (II) Initializing extension XC-MISC
[ 3348.219] (II) Initializing extension XFIXES
[ 3348.219] (II) Initializing extension RENDER
[ 3348.220] (II) Initializing extension RANDR
[ 3348.220] (II) Initializing extension COMPOSITE
[ 3348.221] (II) Initializing extension DAMAGE
[ 3348.221] (II) Initializing extension MIT-SCREEN-SAVER
[ 3348.221] (II) Initializing extension DOUBLE-BUFFER
[ 3348.221] (II) Initializing extension RECORD
[ 3348.222] (II) Initializing extension DPMS
[ 3348.222] (II) Initializing extension Present
[ 3348.222] (II) Initializing extension DRI3
[ 3348.223] (II) Initializing extension X-Resource
[ 3348.223] (II) Initializing extension XVideo
[ 3348.223] (II) Initializing extension XVideo-MotionCompensation
[ 3348.223] (II) Initializing extension SELinux
[ 3348.223] (II) SELinux: Disabled by boolean
[ 3348.223] (II) Initializing extension GLX
[ 3348.231] (II) AIGLX: Loaded and initialized r600
[ 3348.231] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3348.231] (II) Initializing extension XFree86-VidModeExtension
[ 3348.231] (II) Initializing extension XFree86-DGA
[ 3348.232] (II) Initializing extension XFree86-DRI
[ 3348.232] (II) Initializing extension DRI2
[ 3348.237] (II) RADEON(0): Setting screen physical size to 423 x 238
[ 3348.346] (II) config/udev: Adding input device Power Button
(/dev/input/event2)
[ 3348.346] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3348.346] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 3348.346] (**) Power Button: Applying InputClass "system-keyboard"
[ 3348.346] (II) LoadModule: "libinput"
[ 3348.346] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 3348.359] (II) Module libinput: vendor="X.Org Foundation"
[ 3348.359] compiled for 1.20.5, module version = 0.29.0
[ 3348.359] Module class: X.Org XInput Driver
[ 3348.359] ABI class: X.Org XInput driver, version 24.1
[ 3348.359] (II) Using input driver 'libinput' for 'Power Button'
[ 3348.361] (II) systemd-logind: got fd for /dev/input/event2 13:66
fd 27 paused 0
[ 3348.361] (**) Power Button: always reports core events
[ 3348.361] (**) Option "Device" "/dev/input/event2"
[ 3348.361] (**) Option "_source" "server/udev"
[ 3348.372] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 3348.372] (II) event2 - Power Button: device is a keyboard
[ 3348.372] (II) event2 - Power Button: device removed
[ 3348.372] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 3348.372] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 3348.372] (**) Option "xkb_layout" "us"
[ 3348.374] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 3348.374] (II) event2 - Power Button: device is a keyboard
[ 3348.375] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 3348.375] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3348.375] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 3348.375] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3348.375] (II) Using input driver 'libinput' for 'Video Bus'
[ 3348.377] (II) systemd-logind: got fd for /dev/input/event4 13:68
fd 30 paused 0
[ 3348.378] (**) Video Bus: always reports core events
[ 3348.378] (**) Option "Device" "/dev/input/event4"
[ 3348.378] (**) Option "_source" "server/udev"
[ 3348.380] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 3348.380] (II) event4 - Video Bus: device is a keyboard
[ 3348.380] (II) event4 - Video Bus: device removed
[ 3348.380] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input12/event4"
[ 3348.380] (II) XINPUT: Adding extended input device "Video Bus"
(type: KEYBOARD, id 7)
[ 3348.380] (**) Option "xkb_layout" "us"
[ 3348.382] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 3348.382] (II) event4 - Video Bus: device is a keyboard
[ 3348.383] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 3348.383] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3348.383] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 3348.383] (**) Power Button: Applying InputClass "system-keyboard"
[ 3348.383] (II) Using input driver 'libinput' for 'Power Button'
[ 3348.385] (II) systemd-logind: got fd for /dev/input/event1 13:65
fd 31 paused 0
[ 3348.385] (**) Power Button: always reports core events
[ 3348.385] (**) Option "Device" "/dev/input/event1"
[ 3348.385] (**) Option "_source" "server/udev"
[ 3348.388] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 3348.388] (II) event1 - Power Button: device is a keyboard
[ 3348.388] (II) event1 - Power Button: device removed
[ 3348.388] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 3348.388] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 8)
[ 3348.388] (**) Option "xkb_layout" "us"
[ 3348.391] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 3348.391] (II) event1 - Power Button: device is a keyboard
[ 3348.391] (II) config/udev: Adding input device Lid Switch
(/dev/input/event0)
[ 3348.391] (II) No input driver specified, ignoring this device.
[ 3348.391] (II) This device may have been added with another device file.
[ 3348.392] (II) config/udev: Adding input device HD-Audio Generic
HDMI/DP,pcm=3 (/dev/input/event6)
[ 3348.392] (II) No input driver specified, ignoring this device.
[ 3348.392] (II) This device may have been added with another device file.
[ 3348.393] (II) config/udev: Adding input device HD-Audio Generic
Mic (/dev/input/event7)
[ 3348.393] (II) No input driver specified, ignoring this device.
[ 3348.393] (II) This device may have been added with another device file.
[ 3348.393] (II) config/udev: Adding input device HD-Audio Generic
Headphone (/dev/input/event8)
[ 3348.394] (II) No input driver specified, ignoring this device.
[ 3348.394] (II) This device may have been added with another device file.
[ 3348.394] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event3)
[ 3348.394] (**) AT Translated Set 2 keyboard: Applying InputClass
"evdev keyboard catchall"
[ 3348.394] (**) AT Translated Set 2 keyboard: Applying InputClass
"libinput keyboard catchall"
[ 3348.394] (**) AT Translated Set 2 keyboard: Applying InputClass
"system-keyboard"
[ 3348.394] (II) Using input driver 'libinput' for 'AT Translated Set
2 keyboard'
[ 3348.396] (II) systemd-logind: got fd for /dev/input/event3 13:67
fd 32 paused 0
[ 3348.396] (**) AT Translated Set 2 keyboard: always reports core events
[ 3348.396] (**) Option "Device" "/dev/input/event3"
[ 3348.396] (**) Option "_source" "server/udev"
[ 3348.399] (II) event3 - AT Translated Set 2 keyboard: is tagged by
udev as: Keyboard
[ 3348.399] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 3348.399] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 3348.399] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 3348.399] (II) XINPUT: Adding extended input device "AT Translated
Set 2 keyboard" (type: KEYBOARD, id 9)
[ 3348.399] (**) Option "xkb_layout" "us"
[ 3348.402] (II) event3 - AT Translated Set 2 keyboard: is tagged by
udev as: Keyboard
[ 3348.402] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 3348.404] (II) config/udev: Adding input device SynPS/2 Synaptics
TouchPad (/dev/input/event9)
[ 3348.404] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"evdev touchpad catchall"
[ 3348.404] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"libinput touchpad catchall"
[ 3348.404] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 3348.405] (II) systemd-logind: got fd for /dev/input/event9 13:73
fd 33 paused 0
[ 3348.405] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3348.405] (**) Option "Device" "/dev/input/event9"
[ 3348.405] (**) Option "_source" "server/udev"
[ 3348.408] (II) event9 - SynPS/2 Synaptics TouchPad: is tagged by
udev as: Touchpad
[ 3348.409] (II) event9 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 3348.410] (II) event9 - SynPS/2 Synaptics TouchPad: device removed
[ 3348.410] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio2/input/input18/event9"
[ 3348.410] (II) XINPUT: Adding extended input device "SynPS/2
Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 3348.411] (**) Option "AccelerationScheme" "none"
[ 3348.411] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 3348.411] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3348.411] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3348.413] (II) event9 - SynPS/2 Synaptics TouchPad: is tagged by
udev as: Touchpad
[ 3348.415] (II) event9 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 3348.417] (II) config/udev: Adding input device SynPS/2 Synaptics
TouchPad (/dev/input/mouse0)
[ 3348.417] (II) No input driver specified, ignoring this device.
[ 3348.417] (II) This device may have been added with another device file.
[ 3348.420] (II) config/udev: Adding input device Toshiba WMI hotkeys
(/dev/input/event5)
[ 3348.421] (II) No input driver specified, ignoring this device.
[ 3348.421] (II) This device may have been added with another device file.
[ 3349.062] (**) Option "fd" "27"
[ 3349.062] (II) event2 - Power Button: device removed
[ 3349.063] (**) Option "fd" "30"
[ 3349.063] (II) event4 - Video Bus: device removed
[ 3349.063] (**) Option "fd" "31"
[ 3349.063] (II) event1 - Power Button: device removed
[ 3349.063] (**) Option "fd" "32"
[ 3349.063] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 3349.064] (**) Option "fd" "33"
[ 3349.064] (II) event9 - SynPS/2 Synaptics TouchPad: device removed
[ 3349.065] (II) UnloadModule: "libinput"
[ 3349.065] (II) systemd-logind: releasing fd for 13:73
[ 3349.077] (II) UnloadModule: "libinput"
[ 3349.077] (II) systemd-logind: releasing fd for 13:67
[ 3349.085] (II) UnloadModule: "libinput"
[ 3349.085] (II) systemd-logind: releasing fd for 13:65
[ 3349.095] (II) UnloadModule: "libinput"
[ 3349.095] (II) systemd-logind: releasing fd for 13:68
[ 3349.113] (II) UnloadModule: "libinput"
[ 3349.113] (II) systemd-logind: releasing fd for 13:66
[ 3349.146] (II) Server terminated successfully (0). Closing log file.
4 years, 4 months
Anyone using Anydesk or could test it ?
by sixpack13
Hallo
is anyone using Anydesk or could test it ?
https://anydesk.com/en/downloads/linux
since the F31-updates during the last week I'm unable to work with anydesk anymore.
I'm using Xorg not wayland.
Problem:
During the start of an connection a completely blank dialog box pops up.
Usually it's an dialog to allow the connection attempt on the remote box.
Connection between F31 => Windows works.
Connection between F31 <= Windows does not !
Connections between F31 <=> F31 do not !
It is sufficing to try a F31 connection to the *same* machine to see to empty dialog box.
Does anyone know to debug this ?
Against which component should I fill a bug report ?
P.S.
This comment may appear twice in this list, so please ignore.
The first one somehow seems to be got lost ?!
it was created and send from thunderbird to users(a)lists.fedoraproject.org
4 years, 4 months
Fedora31: grub2 issues with grub2-mount using 100% CPU
by Terry Barnaby
I have just started to try out Fedora31 on some of our systems.
I am using a bit of an unusual, manual install method copying an image
of the rootfs to the disk and configuring this, (this may be related to
my issue, but I have been using the same system for 6 years or more).
The particular hardware platform is a bit complicated using a PCIe card
with NVMe disk and two SATA disks. It has to boot (BIOS boot and /boot)
from one of the SATA disks and then uses the rootfs system on the NVMe
disk. I don't think that is related to the the issue though.
The issue is that when I run "grub2-mkconfig -o /boot/grub2/grub.cfg" to
manually configure grub2, this process hangs. There is a process
grub2-mount that is sitting there using 100% of a CPU core. Not sure
what this process does (seems new after Fedora29) but it is passed the
/dev entry for a disk partition some presumably mounts the file system
and "probes" for what OS is installed there. The file system it hangs on
(if you kill the grub2-mount process it will hang on another drive), is
easily mountable without any issues.
It seems like there is some bug in this grub2-mount program. Has anyone
else seen this or have any ideas what might be the issue.
4 years, 4 months
can't get desired font in one user's terminal.
by home user
(Fedora-30; Gnome-3.32.2; stand-alone home work-station)
(user names below are dummies)
When I'm logged in as eng.user, and I edit a text file in the gnome
terminal, and the file is a mix of Chinese and English text, the Chinese
text shows up as a mix of mostly an unknown blocky font (a "ming"? font)
and a little "AR PL UKai...".
When I'm logged in as cn.user, and I edit a text file in the gnome
terminal, and the file is a mix of Chinese and English text, all the
Chinese text shows up as "AR PL UKai...".
Both accounts have the same language (US English), etc. settings in the
gnome setting tool.
In both accounts, the gnome settings tool does *not* offer any way of
setting font, system or otherwise.
In both accounts, the gnome terminal's encoding is set to Unicode (UTF-8).
In both accounts, the gnome terminal preferences does *not* offer a
Chinese font in the menu of font choices.
When logged in as cn.user, the gnome terminal preferences shows the
chosen font as "AR UL UKai...", even though it's not a choice in the
gnome terminal's font menu.
The font is what I want in cn.user. But when I'm logged in as eng.user
(which is most of the time), the other Chinese font is for me much
harder to read. I want Chinese text in text files to all display as "AR
UL UKai...". How do I achieve that?
Thank-you in advance.
Bill.
4 years, 4 months
NFS root omly access -
by Bob Goodwin
My NFS server works fine but not as a user other than root and I have
not been able to change that. I suspect this is not an uncommon problem
and hope that someone can tell me how to fix it?
--
Bob Goodwin - Zuni, Virginia,
Fedora Linux-31 XFCE
4 years, 4 months
linux command "shred"
by Joerg Lechner
Hi,I use 2 systems on my laptop, Windows internal disk, Fedora xx usb connected. My internal disk seems to be bad now. I should give away my laptop for changing the old internal disk to a new one. Before doing that I want to shred the internal windows disk, I have kloned it.. Short silly question: Does the command "shred" also work to shred a Windows disk? Shred I want to execute on the usb connected Fedora disk to shred the internal Windows disk.Thanks in advance for help!Joerg
4 years, 4 months
HowTo rebuild and numerate a package on personal repository
by Dario Lesca
I must rebuild samba.src on my Fedora 31 (to convert experimental MIT
Kerberos to Heimdal Kerberos).
Into my samba.spec I change only mit/heimdal flag and set +1 the
package version.
Then I rebuild and deploy new package on my personal repository,
configure my ADDC server to use it (mysamba.repo) and install this new
working package via "dnf install".
I know how to do all these jobs, and all for now work fine.
But if Fedora release a new version (main stream version o package
version) of samba and I do a "dnf update", new samba-mit Fedora version
is update on my samba-Heimdal version, until I rebuild again the new
version on my repository server
What is the best way to protect this issue?
I must set some flag in "samba.spec" file, or into "mysamba.repo", or
into "dnf update" command line?
Many thanks
--
Dario Lesca
(inviato dal mio Linux Fedora 31 Workstation)
4 years, 4 months