remmina
by Patrick Dupre
Hello,
On a fedora24, I get an error message with remmina
Failed to load plugin: /usr/lib64/remmina/plugins/remmina-plugin-telepathy.so.
Error: /usr/lib64/remmina/plugins/remmina-plugin-telepathy.so: undefined symbol: remmina_tp_handler_new
(remmina:30986): Gdk-CRITICAL **: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
Any idea?
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
6 years
Mount of NAS Ethernet Connect to Router Fails at Boot Time for CIFS
Interface in F24
by Stephen Morris
Hi,
My Nas device now fails to mount at boot time via the CIFS
definition in fstab but the corresponding NFS definition mounts quite
happily. Also after the system comes up and I log into KDE I can
manually mount the CIFS device. As far as I am aware the only difference
between when it was mounting at boot time and now is several system
updates, also the system update I did yesterday morning (which updated
several hundred packages, which included a new kernel) has not rectified
the issue. The systemctl output is below, I have blanked out the userid
and password for security reasons.
Does anyone have any ideas why this has now stopped working?
systemctl status mnt-nas.mount
● mnt-nas.mount - /mnt/nas
Loaded: loaded (/etc/fstab; bad; vendor preset: disabled)
Active: failed (Result: exit-code) since Tue 2017-01-17 06:40:15
AEDT; 40min ago
Where: /mnt/nas
What: //192.168.1.12/Volume_1
Docs: man:fstab(5)
man:systemd-fstab-generator(8)
Process: 1299 ExecMount=/usr/bin/mount //192.168.1.12/Volume_1
/mnt/nas -t cifs -o
username=********,password=********,cache=strict,_netdev,rw
(code=exited, status=32)
Jan 17 06:40:15 localhost.localdomain systemd[1]: Mounting /mnt/nas...
Jan 17 06:40:15 localhost.localdomain mount[1299]: mount error(101):
Network is unreachable
Jan 17 06:40:15 localhost.localdomain mount[1299]: Refer to the
mount.cifs(8) manual page (e.g. man mount.cifs)
Jan 17 06:40:15 localhost.localdomain systemd[1]: mnt-nas.mount: Mount
process exited, code=exited status=32
Jan 17 06:40:15 localhost.localdomain systemd[1]: Failed to mount /mnt/nas.
Jan 17 06:40:15 localhost.localdomain systemd[1]: mnt-nas.mount: Unit
entered failed state.
I have also listed below the fstab definition for the CIFS interface and
the NFS interface.
192.168.1.12:/mnt/HD/HD_a2 /mnt/nfs nfs
users,noatime,nolock,bg,sec=sys,tcp,timeo=1800,_netdev,rw 0 0
//192.168.1.12/Volume_1 /mnt/nas cifs
auto,username=********,password=********,cache=strict,_netdev,rw 0 0
regards,
Steve
6 years
F25: Gnome L2TP VPN connection problem: Invalid VPN service type
(cannot find authentication binary)
by Dario Lesca
I want setup a VPN via L2TP (no IPsec tunnel).
I have install l2tp component:
> NetworkManager-l2tp-gnome-1.2.4-1.fc25.x86_64
> NetworkManager-l2tp-1.2.4-1.fc25.x86_64
> xl2tpd-1.3.8-2.fc25.x86_64
> ppp-2.4.7-9.fc24.x86_64
I have setup a new NetworkManager l2tp vpn connection and fill all know
options (server, user, password, ecc.).
When click on ON/off the VPN start but immediately stop.
This is log error:
> mar 06 01:50:43 dodo.home.solinos.it NetworkManager[1107]: <info> [1488761443.8443] audit: op="connection-activate" uuid="e8f4d6d8-99dd-41bc-9aca-400412d41656" name="ARG (l2tp)" pid=7727 uid=1000 result="success"
> mar 06 01:50:43 dodo.home.solinos.it NetworkManager[1107]: <info> [1488761443.8537] vpn-connection[0x55c5adb90720,e8f4d6d8-99dd-41bc-9aca-400412d41656,"ARG (l2tp)",0]: Started the VPN service, PID 7795
> mar 06 01:50:43 dodo.home.solinos.it NetworkManager[1107]: <info> [1488761443.8755] vpn-connection[0x55c5adb90720,e8f4d6d8-99dd-41bc-9aca-400412d41656,"ARG (l2tp)",0]: Saw the service appear; activating connection
> mar 06 01:50:43 dodo.home.solinos.it gnome-shell[1975]: JS LOG: Invalid VPN service type (cannot find authentication binary)
> mar 06 01:50:43 dodo.home.solinos.it gnome-shell[1975]: JS LOG: Invalid VPN service type (cannot find authentication binary)
> mar 06 01:50:43 dodo.home.solinos.it NetworkManager[1107]: <error> [1488761443.9441] vpn-connection[0x55c5adb90720,e8f4d6d8-99dd-41bc-9aca-400412d41656,"ARG (l2tp)",0]: Failed to request VPN secrets #3: No agents were available for this request.
> mar 06 01:50:43 dodo.home.solinos.it NetworkManager[1107]: <info> [1488761443.9466] vpn-connection[0x55c5adb90720,e8f4d6d8-99dd-41bc-9aca-400412d41656,"ARG (l2tp)",0]: VPN plugin: state changed: stopped (6)
> mar 06 01:50:43 dodo.home.solinos.it NetworkManager[1107]: <info> [1488761443.9590] vpn-connection[0x55c5adb90720,e8f4d6d8-99dd-41bc-9aca-400412d41656,"ARG (l2tp)",0]: VPN service disappeared
>
I'm missing somethings?
Some suggest?
Many thanks.
--
Dario Lesca
(inviato dal mio Linux Fedora 25 Workstation)
6 years
running some X11-Applications with sudo under GNOME/Wayland fails
by Joachim Backes
Hi,
seeing coincidentally that some X11 applications with sudo under
GNOME/Wayland will fail:
-------------------------------------------------------------
For example:
1. sudo xterm
No protocol specified
Warning: This program is an suid-root program or is being run by the
root user.
The full text of the error or warning message cannot be safely formatted
in this environment. You may get a more descriptive message by running the
program as a non-root user or by removing the suid bit on the executable.
xterm: Xt error: Can't open display: %s
2. sudo gnome-terminal
No protocol specified
Unable to init server: Could not connect: Connection refused
Failed to parse arguments: Cannot open display:
----------------------------------------------------------------
Running the same under Gnome/Xorg executes properly.
Anybody sees this too?
Kind regards
Joachim Backes
--
Fedora release 25 (Twenty Five)
Kernel-4.9.13-200.fc25.x86_64
Joachim Backes <joachim.backes(a)rhrk.uni-kl.de>
https://www-user.rhrk.uni-kl.de/~backes/
6 years
Restarting systemd
by Patrick O'Callaghan
'dnf update' (using the tracer plugin) often tells me to restart
certain services via systemctl, which is fine. However on occasion it
tells me to restart something manually. I can usually figure out how to
do this, but the one I can't figure out is systemd itself:
...
You should restart:
* These applications manually:
systemd
# systemctl daemon-reexec
# tracer
You should restart:
* These applications manually:
systemd
Sending HUP, TERM etc. to systemd doesn't make any difference.
Is there a way to do this without rebooting?
For extra credit, why is the output of tracer different when running
via sudo or su within a GUI, compared with running directly as root
logged into a text console? The above commands were run using the
latter. When using the former, tracer gave no output.
poc
6 years
Setting default Xsession on Fedora 25
by Laverne Schrock
Hi,
I'm using GDM on Fedora 25 and want to change the default graphical
session that is used. The "built in" default session is the "Gnome"
session, but I want the default session to be the "Gnome Xorg"
session.
I have added DefaultSession=gnome-xorg.desktop and WaylandEnable=false
to the [daemon] section of /etc/gdm/custom.conf as recommend here:
https://ask.fedoraproject.org/en/question/96134/how-can-i-set-xorg-as-a-d...
I have also deleted all the contents of /var/lib/AccountsService/users
so that no per-user defaults cause problems.
Here is what happens. I boot up the computer, type in my username, hit
enter, and type in my password. Before I proceed, I check which
session is going to be used. "Gnome" is the one selected on the list.
I proceed anyway. After login, I see that Xorg is running, NOT
Xwayland.
I log out, and the go to log back in. I check the list again, and
"Gnome" is still selected. This time when I log in, Xwayland is
running. Huh? If I manually select the "Gnome Xorg" entry, I get what
I expect and my preference will be saved, but I want to set the
default for all users.
Am I doing something wrong or does this seem like a bug? If it is a
bug, I don't know which package it actually belongs to.
Thanks,
Laverne Schrock
P.S.
My graphics card:
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor
Integrated Graphics Controller (rev 12)
6 years
Touchpad, Fedora 25
by Geoffrey Leach
On moving from Fedora 19 to 25, I find that the touchpad RMB is no longer functional.
The installation was made from DVD, so whatever config is provided by the install is what I have.
xinput suggests that the RMB is not configured, so when I attempt to enable it,
xinput --set-prop "SynPS/2 Synaptics TouchPad" "libinput Click Method Enabled" 1,1
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 131 (XInputExtension)
Minor opcode of failed request: 57 ()
Serial number of failed request: 20
Current serial number in output stream: 21
Any ideas? Thanks.
6 years
system suspend
by Jeffrey Ross
I've loaded or configured "something" within Gnome so when I log into
the system from the GUI the system will immediately go into a suspend
state, I bring the system back out of suspend by pressing the power
button and the system works fine from there, if I log in via ssh the
system is fine.
System is Fedora 25 (note config files were brought from 24) and
everything else appears to work fine.
Few system notes, - hardware Lenovo T540P which is in a docking station
with 2 monitors, I do have "tlp" configured and it appears to be
functioning properly.
Where can I identify what applications are being loaded and where can I
locate (or enable?) the log files for my gnome login session?
As a last resort I'm guessing I could wipe my gnome config and start
over although I'd like avoid that if possible, however if I decide that
is the way to proceed, which files in my home directory would I need to
remove?
Thanks, Jeff
6 years
Ibus typing booster apparently does not work on F25
by Paul Smith
Dear All,
I have just installed Ibus typing booster, which does appear on the
system tray, but it does not show up with word suggestions while
writing a text on LibreOffice Writer, for instance.
How should one activate Ibus typing booster?
Thanks in advance,
Paul
6 years
digikam and Iphone (5s) on FC25
by Jens Neu
Hi all,
I just noticed that my digikam (digikam 5.4.0-2.fc25, libimobiledevice
1.2.0-8.fc25) detects my Iphone (most recent IOS updates) as camera but
fails to display photos. I did not find a bug that describes the
behaviour. Can anyone confirm?
regards
Jens
6 years