ATA2:00: link is slow to respond....
by Angelo Moreschini
Hi,
my computer boot only in emergency mode ...
Looking the journalctl (command journalctl -xb), I found (in thejournalctl
) these lines in red color :
ATA2:00: link is slow to respond....
(and after..)
ATA200: SRST failed (erro 16)
That seem indicate that it is a problem to access the HDs..
I found a possible solution to the problem in this post:
http://codeverge.com/opensuse.org.help.install/-solved-ata1-srst-failed-e...
There is wrote that :...the problem can depend by the physic set up of the
HD (as "master", "slave", "single drive", ...): this set up can be done by
changing the position of a jumper on the HD...
I know that, in the past time, the HDs had to be set physically in this
way.., but recently I never heart anymore that the modern HD need this
operation..
So actually I don't care anymore of the configuration of the HDs
(my HD is Toshiba 1 TB that I bought few mounts ago).
I would like to have a confirmation that what I read in the post is only an
obsolete information and, in any case, I would like to know also what I can
do to go around in my problem..
>From the command line: ls /dev/sd* I get:
give me this input :
/dev/sda /dev/sda1 /dev/sda2 /dev/sda5 /dev/sdb /dev/sdb1
/dev/sdb2
Thank you
regards
Angelo
7 years, 2 months
New kernels won't boot
by David A. De Graaf
My trusty old IBM T30 laptop will no longer boot with the latest
kernel-4.7.9-200.fc24.i686
kernel-4.8.4-200.fc24.i686
kernel-PAE-4.8.4-200.fc24.i686
It will still boot
kernel-4.7.7-200.fc24.i686
The grub2 menu is displayed, and after selecting the 4.7.7-200 kernel
there's a 2-3 sec delay with blinking cursor, then I'm prompted for
the encryption passphrase for the /home filesystem. Then the
voluminous messages (from removing the rhgb boot option) scroll forth
and bootup proceeds normally.
However, If I choose any of the newer kernels, the blinking cursor
remains forever; no prompt for the encryption passphrase occurs; the
keyboard is totally non-responsive. Power cycling is required to
recover.
Things I've tried:
- dnf remove <the "bad" kernel>, and reinstall it.
- Rebuild initramfs-4.8.4-200.fc24.i686.img with dracut. The new file
is only one byte bigger, probably due to a different date, and still
won't boot.
- Added the secret 'dis_ucode_ldr' boot option, as revealed in
https://www.reddit.com/r/Fedora/comments/4qrl1k/kernel_46_wont_boot_how_c...
but this seemed aimed at newer IBM laptops, and indeed, had no
effect on my T30.
- Updated the BIOS. The T30 has two components: the BIOS and the EC
(Embedded Controller). My BIOS was up to date at version 2.10
but the EC was v. 1.03, while v. 1.07 was available.
Sadly, updating to EC v. 1.07 did not alleviate the problem.
Any thoughts, shared experience, commiserations, suggestions?
What can be so different about these newer kernels?
--
David A. De Graaf DATIX, Inc. Hendersonville, NC
dad(a)datix.us www.datix.us
7 years, 3 months
Screen rapidly blanking on and off
by Ted Roche
I've run into a problem with my Dell Inspiron where the screen blanks
every second, unless I'm typing or moving the mouse. Spinning the
mouse around the screen will keep the screen lit, while typing will
blank between keystrokes, and I'm a fair 70 wpm typist.
This ia Fedora 23 64 bit installation, and I've seen the problem on
all three of the current kernel installs,
Linux jupiter.in.tedroche.com 4.7.4-100.fc23.x86_64 #1 SMP Thu Sep 15
18:48:53 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
4.7.4, 4.7.5, and 4.7.6.
Nothing in the logs stands out and unusual.
Suggestions on what I might look at to troubleshoot ths?
--
Ted Roche
Ted Roche & Associates, LLC
http://www.tedroche.com
7 years, 3 months
WD My Passport Ultra 3T usb drive problem
by Gregory P. Ennis
Everyone,
I just purchased 3 WD My Passport Ultra 3T usb drives that I had hoped
to use for archive files for some digital images.
Looks like WD has made it difficult to use for Linux. The google
searches that I did stepped me through mounting it on a Windows 10
system and then formatting it with nts. Unfortuantely, when I tried to
connect it to Fedora 24 I am still not able to recognize it to mount
it. All of the /dev/sd* entries were the same before and after I
plugged it in. Smartmontools appears to recognize it when it is
plugged in a usb port, but pauses and does not finish its execution to
completion. gparted scans all devices and does not finish when the
drive is plugged in a usb port.
Has anyone in the group figured out how to use these drives?
Thanks for you help!!!!
Greg Ennis
7 years, 4 months
OT: determining when a pdf file was created/by whom
by Ranjan Maitra
Dear friends,
I have been e-mailed a pdf file and I wanted to know who the author was and what the date/time of creation was. Is it possible for me to find this information using tools available on the F24 repositories?
Many thanks and best wishes,
Ranjan
--
Important Notice: This mailbox is ignored: e-mails are set to be deleted on receipt. Please respond to the mailing list if appropriate. For those needing to send personal or professional e-mail, please use appropriate addresses.
7 years, 4 months
Go language
by Howard Howell
Hi, everyone,
I loaded go using dnf...
sudo dnf install go
I am on an AMD64 system with F24 installed.
The issue is that the /usr/share/gocode/src/code.google.com/p
was empty. I installed the golang...devel package and it added the
go.tools directory with several subdirectories and other things. The
issue is that the various libraries needed by the code I am working on
are not loaded. I downloaded the latest archive from golang.org and it
appears the various things that I need, or at least most of them are in
the archive. The problem is that removing the go packages via DNF will
probably decimate the system. So how do I remove the current package
or update it with the required libraries? I have not been successful
in searching for the required packages or libraries using dnf.
Regards,
Les H
7 years, 4 months
Re: Umatrix Firefox Addon -
by Bryon Adams
On Nov 24, 2016 8:16 PM, Bob Goodwin <bobgoodwin(a)fastmail.us> wrote:
>
> On 11/24/16 19:53, jd1008 wrote:
> > Just curious!
> > What does umatrix do for FF?
>
> +
>
> Most important to me is it is a simple
> way to eliminate the "talking heads" on
> Fox News, etc. I just want to read the
> text I select, otherwise I might watch TV.
>
> Bob
>
> Bob Goodwin - Zuni, Virginia, USA
> http://www.qrz.com/db/W2BOD
> box10 FEDORA-25/64it LINUX XFCE Fastmail POP3
> _______________________________________________
> users mailing list -- users(a)lists.fedoraproject.org
> To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
I've never used that extension but would the reading view accomplish the same thing?
7 years, 4 months
Re: can not install fedora 25
by William Biggs
Workstation
On Nov 30, 2016 7:08 AM, "Michael Schwendt" <mschwendt(a)gmail.com> wrote:
On Tue, 29 Nov 2016 22:53:57 -0500, William Biggs wrote:
> I burn the iso or 25
Which one exactly?
> to usb and I also did it to a dvd same error . When I
> click the install I get the the part to select English . Then I click
> continue . Then the install locks up it will not get past the point at
all
> it just set there . I also have try to re down it same thing i have tried
> more then one usb drive And dvd disk
How long have you waited for anything to happen?
_______________________________________________
users mailing list -- users(a)lists.fedoraproject.org
To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
7 years, 4 months
fedora create livecd creator fails with LXDE ks, and with package
conflicts
by Ranjan Maitra
Hello,
I am aware that a more appropriate place to post would have been the livecd list which is archived at
https://lists.fedoraproject.org/archives/list/livecd@lists.fedoraproject....
but since the archives seem to be pure spam for the past two months, I am not sure if anyone reads it any more.
So, I thought that I would try my luck here.
I have been trying to build the LXDE spin iso using the default Fedora 25 kickstarts available
/usr/share/spin-kickstarts/fedora-live-lxde.ks and the dependent kickstart files. So, I try the following and get:
$sudo setenforce 0
$ sudo livecd-creator --config=fedora-live-lxde.ks --tmpdir=tmp --fslabel=Fedora-LXDE-25_x86_64
/usr/lib64/python2.7/optparse.py:1013: PendingDeprecationWarning: The KSOption class is deprecated and will be removed in pykickstart-3. Use the argparse module instead.
option = self.option_class(*args, **kwargs)
['/sbin/mkfs.ext4', '-F', '-L', '_Fedora-LXDE-25_x86_64', '-m', '1', '-b', '4096', '/dev/loop0']
/usr/lib/python2.7/site-packages/yum/config.py:1093: PendingDeprecationWarning: use len(mi) instead
startupconf.distroverpkg)
/usr/lib/python2.7/site-packages/imgcreate/yuminst.py:161: PendingDeprecationWarning: use len(mi) instead
option = option.replace("$releasever", yum.config._getsysver("/", ("system-release(release)", "redhat-release")))
No such package system-config-network to remove
Error creating Live CD : Failed to build transaction : libcrypt conflicts with libcrypt-nss-2.24-3.fc25.x86_64
libcrypt-nss conflicts with libcrypt-2.24-3.fc25.x86_64
As we can see, the conflict does not allow for the creation of the LiveCD to proceed. But this is the vanilla kickstart file for Fedora's LXDE so I was wondering what was going wrong here?
Thanks very much in anticipation!
Best wishes,
Ranjan
--
Important Notice: This mailbox is ignored: e-mails are set to be deleted on receipt. Please respond to the mailing list if appropriate. For those needing to send personal or professional e-mail, please use appropriate addresses.
7 years, 4 months
problem with custom partitioning installing 32-bit F25
by Andre Robatino
I'm trying to install 32-bit F25 Gold (RC1.3) from the netinst, with custom partitioning. The only reason I need custom partitioning is to avoid creating a separate /home partition. Unfortunately, due to https://bugzilla.redhat.com/show_bug.cgi?id=1375732 , it won't let me expand the / partition to use the space freed after deleting /home. (This bug wasn't fixed since 32-bit is no longer a blocker.) Is there any fairly easy way to achieve this without custom partitioning in the installer? Or is it likely that an updates.img would be made available after release day to work around this type of issue?
7 years, 4 months