> On 06/27/2012 04:02 PM, Hiisi wrote:
>> On 27 June 2012 20:05, linux guy <linuxguy123(a)gmail.com> wrote:
>>> I've been using F16 since before Christmas and I must say that it has
>>> become a very polished and powerful release.
>>> Kudos to those who have worked so hard on it. We don't thank you
>>> people enough. Your work is greatly appreciated.
>> F16 is from the previous century. Now is f17 era. Anyway, thank you,
> Even though Fedora 17 is the current release of Fedora, and F18 is on the
way I'm still using Fedora 16 and until I have a dire need to upgrade I
don't think I'll be doing so until it's EOL. I'm not going to keep jumping
from version to version just because they've been released. Especially when
sometimes they may have an adverse affect on some piece of hardware of
some software. But I also want to echo the sentiment...so..."to the
individuals who struggle, toil, and beat away on an "almost perfect" OS
Many thanks and please don't EVER stop the great work you're doingO
> EGO II
> users mailing list
> To unsubscribe or change subscription options:
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org
Yes before finding Gentoo, it was my go to distro. For a binary based
distro, it's at the top of my list.
I was just wondering if anyone knew of a program, or command that give
you a "scan" of your memory running on your system? Preferably, it
should also give you stats as to what KIND of memory you have, the
AMOUNT of memory, and the MAX capacity that your machine can hold. Any
advice or suggestions would be greatly appreciated.
I'm on FC 15 which is acting as a router for Cable Internet connection
for 145 PC on the LAN, which works fine... But there is one question in
my mind, How do I limit the maximum numbers of concurrent connections to
router. i.e. if I want to allow only 90 concurrent connection to the
router at the given time only 90 PCs can pass through the router or
connect to the Internet other PCs/users have to wait until the connected
PCs session is over.
is there any solution/tweak available ???
^ ^ Jatin Khatri
Registerd Linux user No #501175
Ran into a transaction error trying to update python-qpid to 0.16-1 on
my F17 laptop yesterday:
# yum -y update --skip-broken
Here are the qpid packages I have installed:
$ rpm -qa | grep qpid | sort
See the last line below for the transaction error. Anyone have any
suggestions how to work around this one?
Fairview Heights, IL
Package Arch Version Repository Size
python-qpid noarch 0.16-1.fc17 updates 397 k
Skipped (dependency problems):
boost-filesystem i686 1.48.0-11.fc17 fedora 72 k
boost-program-options i686 1.48.0-11.fc17 fedora 125 k
boost-system i686 1.48.0-11.fc17 fedora 30 k
python-qpid-qmf x86_64 0.16-1.fc17.2 updates 369 k
qpid-cpp-client i686 0.16-1.fc17.2 updates 1.0 M
qpid-cpp-client x86_64 0.16-1.fc17.2 updates 984 k
qpid-cpp-client-devel x86_64 0.16-1.fc17.2 updates 386 k
qpid-cpp-server i686 0.14-1.fc17.2 fedora 1.0 M
qpid-qmf x86_64 0.16-1.fc17.2 updates 429 k
Upgrade 1 Package
Skipped (dependency problems) 9 Packages
Total size: 397 k
Running Transaction Check
Running Transaction Test
Transaction Check Error:
file /usr/bin/qpid-python-test from install of python-qpid-0.16-1.fc17.noarch conflicts with file from package python-qpid-qmf-0.14-1.fc17.2.x86_64
we have eth1; in the beginning it was proposed to create from eth1,
eth1.2500 and eth1.240. It did not worked cause vlan 1.2500 was not
tagged in the switch.
so they decided to leave eth1 like a physical interface with eth1.2500
config (removel vlan tag) and create eth1.240
but it did not work because when eth1.240 is up , the eth1 lose it´s
gateway using eth1.240 gateway. manually we get to assing its gateway
but its a temporal solution , cause if service network or server is
restarted it turns back. we need a permanent solution.
i attach how is the config done:
FH0089:root:/etc/sysconfig# cat network
FH0089:root:/etc/sysconfig/network-scripts# cat ifcfg-eth1
# Broadcom Corporation NetXtreme BCM5715S Gigabit Ethernet
FHge0082:root:/etc/sysconfig/network-scripts# cat ifcfg-eth1.240
# Broadcom Corporation NetXtreme BCM5715S Gigabit Ethernet
FH0089:root:/etc/sysconfig/network-scripts# cat route-eth1.240
FH0089:root:/etc/sysconfig/network-scripts# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.53.129.192 10.224.248.1 255.255.255.240 UG 0 0 0 eth1.240
10.53.129.0 10.224.248.1 255.255.255.240 UG 0 0 0 eth1.240
10.130.0.0 0.0.0.0 255.255.255.192 U 0 0 0 eth1
10.129.15.0 0.0.0.0 255.255.255.128 U 0 0
10.224.248.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1.240
10.129.0.0 10.129.15.3 255.255.0.0 UG 0 0
0.0.0.0 10.130.0.4 0.0.0.0 UG 0 0 0 eth1
last line you see above is the one which is not included in route
tables by default, even if GATEWAY is configured in
we looked for a file which could affect including a route by default
but we didnt find it.
i rebooted the server, and i´ve been thinking about using this command
/sbin/ip route flush table all
but i think if i already rebooted after erase all eth1.240 (route too)
files it would be useless
i would like anybody help me cause i´m in a hurry
I will have to install Windows on my desktop, which is currently running
Fedora 17. The problem with this is that Windows overwrites the MBR (there
is no way of opting out of this afaik), and hence my grub as well. How can
I reinstall grub after I install windows, so that I again can get a boot
screen where I can select either operating system? Thanks in advance!
How did you run grub2-install?
It is very important to know the error message.
Enviado desde mi PC con Windows 8
De: Christopher Svanefalk
Enviado el: jueves, 28 de junio de 2012 8:14:01
Para: Community support for Fedora users
Asunto: Re: Restoring grub after Windows install
So last day I got around to installing Vista. The last 12 hours have convinced me that this is arguably the worst operating system ever made, and booting back into F17 was bliss. I have not tried Windows 7 very much (only really use Windows at all if Wine will not give me a smooth solution).
Reinstalling Grub with the F17 seems to be broken by the way...grub2-install throws an error. I did not record it unfortunately, but I am assuming it can be fixed. If nothing else, it is not problematic to use an earlier version for recovery unless you need Grub2.
On Thu, Jun 28, 2012 at 2:00 AM, Roger <arelem(a)bigpond.com> wrote:
Deceptively simple and elegant solution, apply the DWPGA rule.
Delete Windows, problem goes away.
Solved problems on our computers.
Am 28.06.2012 01:30, schrieb Dave Ihnat:
On Wed, Jun 27, 2012 at 11:16:28PM +0200, Christopher Svanefalk wrote:
The license does not permit usage in a virtual machine, unfortunately.
What license? AFAIK, none of the Windows licenses forbid running in a VM.
Most versions of Windows don't make any provision for it.
this is simply wrong
Licensing the Windows Desktop Operating System
For Windows operating system software licensed through retail (FPP) or preinstalled on a PC (OEM), Windows use
rights are outlined in the Software License Terms that accompany the software. These license terms provide use
rights to run Windows locally on the licensed device in a virtual operating system environment (OSE); however they
do not provide use rights for accessing Windows running remotely in a virtual OSE from the licensed device, and are
limited in other ways when compared to virtualization use rights provided with Windows Software Assurance, Windows
Intune, and Windows VDA licenses acquired through Microsoft Volume Licensing. For example, neither FPP nor OEM
licenses permit remote access to a Windows virtual machine (VM) running in a datacenter. For this, a license
obtained through Microsoft Volume Licensing is required.
users mailing list
To unsubscribe or change subscription options:
Have a question? Ask away: http://ask.fedoraproject.org
I'm trying to configure dynamic dns on my test/backup machine (CentOS
5.8). I'm using Zoneedit DNS.
I've been trying to setup ddclient; the error message that I get is:
Jun 26 15:20:09 xxxxxx ddclient: WARNING: file
/var/cache/ddclient/ddclient.cache, line 3: Invalid Value for keyword 'ip'
Or should I use ez-ipupdate?