File copy errors on EXT4 SSD but fsck says its clean ????
by linux guy
I am trying to do a full backup of my home directory on an SSD drive
with about 70 GB of content via a straight folder to folder copy in
Dolphin.
When I did the copy, the process reported a file could not be read. I
answered Skip and it continued. A short while later it reported
another file could not be read. I answered Auto Skip. Then I went
to bed.
When I woke it, it appeared that the process had completed, but that
only 69 of the 70 GB had been copied, ie there were a lot of
unreadable files.
I pulled the drive from the laptop and installed it into another
working system as a data drive.
The drive is formatted EXT4. It has 3 partitions, /boot, swap and /.
When I run fsck on it, it reports its clean.
[root@server me]# fsck /dev/sdb1
fsck from util-linux 2.20.1
e2fsck 1.41.14 (22-Dec-2010)
/boot: clean, 300/150600 files, 178166/610436 blocks
[root@server me]# fsck /dev/sdb2
fsck from util-linux 2.20.1
fsck: fsck.swap: not found
fsck: error 2 while executing fsck.swap for /dev/sdb2
[root@server me]# fsck /dev/sdb3
fsck from util-linux 2.20.1
e2fsck 1.41.14 (22-Dec-2010)
/: clean, 1063293/37126144 files, 29660166/37120190 blocks
I ran the process again and tried to nano the files that its reporting
it can't read. Nano can't open them either and they are not binary
files.
Where do I go from here ?
How would I best do a command line copy such that it doesn't stop at
the files it can't read and it creates a log of them ? (What does cp
--force do ?)
Thanks !
12 years, 3 months
Trouble with Burning Video DVD's
by Charlie McVeigh
Not a Fedora problem exactly, but I am asking here anyways because there
are so many people smarter than me on this board. I am using Fedora 14
as I describe my situation below.
I created a photo sideshow using Imagination and rendered it as a .vob
file such that it is suitable for a video DVD. Using DeVeDe I built the
appropriate menu structure for the video DVD and generated an .iso file
ready for burning as a video DVD. Lastly I used K3b to burn the .iso
image to a DVD+R disk.
Here is were my problem begins – the video DVD will not play on every
device that I put it into. It plays fine on every computer in my house,
my son's Xbox, and a Sony DVD player connected to one of our TV's. It
does *not* play on a neighbors Mac Book Pro, but does play on their DVD
connected to the TV. When I go to another neighbor it does work on their
Mac Book but when playing on their DVD attached to the TV I get
“venetian blind” effect where the DVD is playing but I have stipes
across the screen like looking through a venetian blind.
I am pretty sure the problem is when I am rendering the .vob or creating
the .iso, but I simply don't see any options to tweak. What do I need to
do to get a video DVD that play reliably across many devices?
12 years, 3 months
DVD ISO copy weirdness
by 夜神 岩男
I bought a new movie on DVD the other day for my kid (Christmas and
all...). I wanted to back it up because I've noticed a few of my older
DVDs don't play correctly anymore (blocky in spots or don't play period
but are studio cuts that used to work!).
Normally I just put a DVD in the drive, select "Copy disk..." and move
through the dialogue to save it to an .iso. Later I can either have the
computer or the player play it from anywhere in the house.
Simple.
But today this one is acting strangely. It is giving me a css key error,
which is weird, because this is not BlueRay or anything, and it works
just fine in the ancient for-TV DVD player, so its nothing new.
Beyond that, I can open the disk up and see the typical DVD directories:
{VIDEO,AUDIO}_TS
Looking in VIDEO_TS to see what's the matter, everything can be played
just fine. No CSS problems. The DVD works in Media Player, VLC, etc.
just fine. I can run each individual chapter segment as well. But the
total size of VIDEO_TS claims to be 46GB, about 10 times bigger than it
should be... and I'm not going to copy 46GB just to get a movie. It was
a good movie, but not THAT good.
Any ideas?
12 years, 3 months
Re: Boot Disk
by R. G. Newbury
On 12/27/2011 11:21 AM, Jeffrey Ross wrote:
>> > On Sun, Dec 25, 2011 at 2:37 PM, Jeffrey Ross<jeff(a)bubble.org> wrote:
>>> >> Is there a way to identify which disk the BIOS is using to boot from (eg
>>> >> disk 0 or 1) when I don't have physical access to the system to view the
>>> >> BIOS settings?
>> > If both disks have identical bootloaders, I'm not sure there's any way
>> > from a running system to check which one you booted from. If you
>> > don't mind rebooting it, you could add a different arbitrary kernel
>> > argument to the GRUB configuration of each disk's bootloader, reboot
>> > the machine, then check /proc/cmdline to see which one shows up.
> In this case it turns out it was booting off of sda (which is what I
> suspected), I ended up taking a ride down to the datacenter and verifying
> the BIOS.
>
> The original question although no longer important remains, can you tell
> which disk the initial load occurred from? I did run dmidecode and found
> nothing of value.
There is a way to determine things remotely, if you do some setup
beforehand.
Your two hard drives are otherwise (I presume) exactly alike.
Set them up similarly, *except* that both use all but a megabyte or so
(or one cylinder's worth of blocks). Make that little extra into a
partition on ONE of the disks.
You can then remotely use 'cat /proc/partitions' to show the attached
drives and partition sizes (or use 'sfdisk -uC -l').
The extra partition will denote which drive is being used as 'sda' or
'sdb'. This method is independent of the contents of the disk.
You may be able to re-size both of them in place although it might
require another site visit. I have NO idea if gparted can be made to
work remotely with vnc etc.
Geoff
12 years, 3 months
p21p1 is down after reboot
by Hiisi
Hi, list.
I've deleted NetworkManager and created
/etc/sysconfig/network-scripts/ifcfg-p21p1 with following content:
DEVICE=p21p1
TYPE=inet
ONBOOT=yes
BOOTPROTO=dhcp
#IPADDR=10.7.0.200
#NETMASK=255.255.255.0
#NETWORK=10.7.0.0
#BROADCAST=10.7.0.1
NAME=p21p1
BRIDGE=br0
Whenever I reboot this system p21p1 is down (I have first to ifconfig
up it and act with dhclient to it). What's the prob? What am I doing
wrong?
TIA
--
Hiisi.
Registered Linux User #487982. Be counted at: http://counter.li.org/
--
Spandex is a privilege, not a right.
12 years, 3 months
where is the config for dynamically added volumes in nautilus?
by Da Rock
I've googled for close to a week to resolve this. I know that inserting
a usb disk (depending on setup and version) causes a knock on effect by
calling dbus, hal, and maybe more depending. But *how* does nautilus (or
any other file manager system) find out that the disk is there and put
an icon in the sidebar ("places")?
I've checked bookmarks, GConf- nothing I can see anywhere tells me how
this is done. I figured there must be a GConf setting somewhere or
another backend that stores this otherwise there'd be too many lookups.
Surely it can't be polling for it through hal continuously?
Clues anyone?
12 years, 3 months
A couple of repeatable ways to freeze-up Fedora..
by Linda McLeod
A couple of repeatable ways to freeze-up Fedora.. which is probably
related and linked to other unsolved problems in Fedora..
As F-14 is booting-up, plug-in 8 flash-drives (2 hubs) before the OS is
fully booted...
With Shotwell slideshow up at full screen, tap "next pix" button about
ten times...
Tell me.. When glitches are found, diagnosed, and solved, does the
solution fix other unexpected problems in other areas..?
--
http://www.fastmail.fm - The way an email service should be
12 years, 4 months
"F14 is EOL, so why report something for a version of Fedora that is no longer maintained?.."
by Linda McLeod
Re: A couple of repeatable ways to freeze-up Fedora..
From:
"Patrick Lists" <fedora-list(a)puzzled.xs4all.nl> [Add]
To:
"Community support for Fedora users" <users(a)lists.fedoraproject.org>
Date:
Wed, 28 Dec 2011 3:13 PM (23 hours 37 minutes ago)
Show message - Delete attached message - Save copy of attached
message
Show full header
On 29-12-11 00:06, Linda McLeod wrote:
> A couple of repeatable ways to freeze-up Fedora.. which is probably
> related and linked to other unsolved problems in Fedora..
1) F14 is EOL so why report something for a version of Fedora that is
no longer maintained?
2) if you were to see a bug on F15 or F16 instead of posting it here
you should report it on https://bugzilla.redhat.com but only after
you have verified that it has not already been reported.
Patric
___________________________________
Because F-15 & 16 are the Pits.. They are so yuk! & thht gaudy, they
nearly make me lose my cookies trying to run them.. I tried 15 & 16 for
a day and a half each, and couldn't take any more thht in the face.. 15
& 16 make me feel like I'm stuck back in the prehistoric days of Windows
crap OS's.. 15 & 16 are barely functional for pix work, quality
artistry, and custom preference configuring.. That insane desktop is a
nightmare to use.. Gives one the same feel "as did the first day of her
period, wearing white slacks".. 15 & 16 fight the user all the way..
That horrid desktop feels and runs like it's made exclusively of
window's viruses... I'm stuck with F-14 because it works like I breathe
and beat and blink.. F-14 lives with me.. it feels like it's made for my
needs.. 15 & 16 feels like "it's the collage spinning above a baby's
crib".. 15 & 16 feels like the software writers are trying to emulate
Windows OS's, and that's "sick".. 16 is disgusting to use at best..
Sorry for the harsh truth, but it is the truth...
I post Linux concerns here, because I figure if I find glitches in F-14,
they are probably in 15 & 16, and might get fixed.. but there aren't any
update downloads for 14 any more, which means it's probably fallen by
the roadside.. oh sigh, & darn... RH/F should keep 14 going till they
can see it to flush the vile W-XP crap out of F-16, and bring it back to
a Linux OS...
RH should determine how many users 15 & 16 have pushed away from the
Fedora project..
One could find the figures, in how many IP's downloaded F16, to how many
of those aren't updating F-16, determining the ones who gav-up on
Fedora, because it just got too crappy and kookoo.. Robots would
probably like 16.. but real people sure couldn't.. Trying to run 16
would be like trying to get your cell phone working after it fell into
the pool...
Sorry for laying it out as too-much reality for you.. but I says it like
I feels it.. F-16 just makes me feel ill, F-16 Stinks!.. 14 feels like
it's made of love and life.. 16 feels like it's made of fresh doodoo...
Flush 16!, we are surfing for other distros.. Real Linux OS's that
haven't let us down by dragging us through the broken glass, piss, and
rot of kookoo world's gaudacious useless facade...
Scream and cry if you must...
--
http://www.fastmail.fm - IMAP accessible web-mail
12 years, 4 months
F16 clean install issues.
by Michael D. Setzer II
Have been testing an upgrade with F16 on one of my classroom
machines, and ran into some issues. Missing
maximize/minimize/close buttons on windows. Cleaned out a
number of (.*) directories in a guest account then when I started
the vncserver it gave the gnome3 message screen and worked,
but having some other issues so decided to do a full rebuild on
another machine.
Strangely, for the most part the gnome3 seems to work with the
clean install, but the top bar is totally unreadable, and while the
icons and text seem to show up fine in the main window, the text
on the right is sometimes unreadable.
ftp://amd64gcc.dyndns.org/F16Screenshot.png
These 20+ classroom machines have very old nvidia Geoforce
5200 cards with only 128M of Ram.
Haven't tried the vnc access on the clean install yet, but have
other machines that it seems to work fine on with a clean install,
but they have higher end video cards.
+----------------------------------------------------------+
Michael D. Setzer II - Computer Science Instructor
Guam Community College Computer Center
mailto:mikes@kuentos.guam.net
mailto:msetzerii@gmail.com
http://www.guam.net/home/mikes
Guam - Where America's Day Begins
G4L Disk Imaging Project maintainer
http://sourceforge.net/projects/g4l/
+----------------------------------------------------------+
http://setiathome.berkeley.edu (Original)
Number of Seti Units Returned: 19,471
Processing time: 32 years, 290 days, 12 hours, 58 minutes
(Total Hours: 287,489)
BOINC@HOME CREDITS
SETI 11624500.838977 | EINSTEIN 7054097.359851
ROSETTA 4083183.967008 | ABC 10078236.983416
12 years, 4 months