blank DVDs are not mounted on FC6
by Globe Trotter
Hi,
How do I get to write to a DVD. I put in a blank DVD and I don't get anything.
Mount volume says no media, and I cant figure out how to proceed since nothing
works.
is this a feature or a bug?
Best,
trotter
____________________________________________________________________________________
Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469
16 years, 8 months
how do I get pine?
by Michael Hennebry
How do I get pine?
I tried "yum provides pine" and got lots of output,
but none of it seemed to point to pine.
I got the same amount of joy looking for elm.
Any ideas?
--
Mike hennebry(a)web.cs.ndsu.NoDak.edu
"Horse guts never lie." -- Cherek Bear-Shoulders
16 years, 8 months
F7- Dictionaries of Thunderbird
by Antonio M
When you have additional directories (other than English-USA) and a
new Thunderbird is installed, only the English-USA dictionary is moved
to /usr/lib/Thunderbird-new, while other dictionaries are left in
/usr/lib/Thunderbird-previous and you have to move by hand.
Similar behavior in FC6 and oldest releases.
--
Antonio Montagnani
Skype : antoniomontag
16 years, 8 months
Using ntfs-3g
by Karl Larsen
I got this yummed and then tried it. In a root terminal I wrote:
# mount -t ntfs /dev/sda1 /fc4
and it worked. I went to /fc4 and there was my windows file system.
This would sure make getting things off that Windows file system easy :-)
Karl
16 years, 8 months
Kernel 2.6.22.1-33.fc7 and USB Storage Devices
by Aly Dharshi
Hello All,
I hope that you are well. I have a 6.0GB Seagate ST660211USB device
which previously used to get magically automounted and an icon showed up
on screen, I know that there are some threads about this flying about.
Does this kernel resolve this particular issue, if not what sort of
information can I provide inorder to help troubleshoot:
[root@edtnas67 dharshi]# uname -a
Linux localhost.localdomain 2.6.22.1-33.fc7 #1 SMP Mon Jul 23 17:33:07
EDT 2007 i686 athlon i386 GNU/Linux
This is the dmesg output:
usb 3-6: new high speed USB device using ehci_hcd and address 7
usb 3-6: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 5:0:0:0: Direct-Access SEAGATE ST660211USB 4.06 PQ: 0 ANSI: 2
sd 5:0:0:0: [sdd] 11719008 512-byte hardware sectors (6000 MB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 73 00 00 08
sd 5:0:0:0: [sdd] Assuming drive cache: write through
sd 5:0:0:0: [sdd] 11719008 512-byte hardware sectors (6000 MB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 73 00 00 08
sd 5:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg4 type 0
usb 3-6: USB disconnect, address 7
usb 3-6: new high speed USB device using ehci_hcd and address 8
usb 3-6: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
Cheers,
Aly.
--
Aly S.P Dharshi
aly.dharshi(a)telus.net
Got TELUS TV ? http://www.mytelus.com/tv or 310-MYTV
"A good speech is like a good dress
that's short enough to be interesting
and long enough to cover the subject"
16 years, 8 months
uni directional ssh -
by Bob Goodwin
I have two F7 computers on my LAN. Box7 will ssh into box6 but box6 can
not ssh into box7?
I use Firestarter, have tried stopping it in both computers to no avail.
Box6 will ping box7 but will not connect.
ssh box7
ssh: connect to host box7 port 22: Connection refused
ping box7 -c3
PING box7 (192.168.1.7) 56(84) bytes of data.
64 bytes from box7 (192.168.1.7): icmp_seq=1 ttl=64 time=0.615 ms
64 bytes from box7 (192.168.1.7): icmp_seq=2 ttl=64 time=0.267 ms
64 bytes from box7 (192.168.1.7): icmp_seq=3 ttl=64 time=0.264 ms
--- box7 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.264/0.382/0.615/0.164 ms
The symptoms with sftp are similar as might be expected.
What am I missing?
Bob Goodwin
16 years, 8 months
Goodbye F7
by Karl Larsen
I must have too many special uses for my Linux. I went to F7 because
of many nice things :-)
I got many things working and sent in 4 Bug reports none of which have
been solved. I was just not able to live without the things I must have.
So I am back to FC6 and will get a few things from F7 to here and be
done with it :-(
Karl
16 years, 8 months
recording video from webcam?
by Tom Horsley
I see mencoder is supposed to be able to record audio from
an alsa audio source, but I've never been able to get it
to work. (I can start up arecord in the background, then
combine the audio and video with a 0.4 second delay, and
have it work reasonably well, but that seems kinda klunky).
Any handy apps for recording video and audio simultaneously
(with a v4l2 only driver - not the original v4l)?
All the fancy DVR apps I've tried seem to freak out when
presented with a video source that doesn't have a tuner
(maybe it would be simpler to hack the driver to pretend
to have a tuner, but always tune to the same channel :-).
16 years, 8 months
Re: Really REALLY slow computer
by Steve Blackwell
D. Hugh Redelmeier wrote
> Sometimes machines run slowly due to being swamped by unhandled
> interrupts. It would be interesting to monitor /proc/interrupts to
> see if this is happening.
I don't know what I'm looking for but there are 2 things that I
noticed about the contents of the /proc/interrupts file:
1. when I typed 'cat /proc/interrupts' I got a message saying
something like 'file not terminated correctly'. I don't remember the
exact wording. It looks like a few characters and the end-of-line are
missing. I'm guessing that this is no big deal and that cat read the
file in the middle of an update.
2. The LOC line has some large numbers; ~1500000 for each processor.
This is immediately after boot up, (Immediate isn't the right word as
it takes ~45mins to boot and log in) Is this normal?
I have updated to FC7T4 and I am now running the 2.6.21-1.3116 kernel
which someone suggested would correct the problem but it did not. I
have also tried with acpi=off as a kernel option but that didn't
change anything either.
HP dc7700p, 2G RAM, 2x250G
Steve
16 years, 8 months
Re: really REALLY slow computer
by Steve Blackwell
Mikkel L. Ellertson wrote:
>>> This is immediately after boot up, (Immediate isn't the right
>>> word as it takes ~45mins to boot and log in) Is this normal?
>>> Forty-five minutes? NO!
>>
>> Yup, 45 mins!
>>
>> It starts to boot OK but really bogs down when it gets to INIT and then
>> udev times out which takes about 10mins. I was hoping the 2.6.21 kernel
>> was going to help but it did not. Everything seems to function OK when
>> it finally boots but it juuussssttt ttttoooo ssslllooowwww. AAAAGGGGHHHH!
>>
>Is there anything in the logs about timeouts during boot?
>/var/log/dmesg may have some clues...
Nothing about timeouts. Here are a few things from dmesg that might be
of interest.
...
checking if image is initramfs... it is
Freeing initrd memory: 3470k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
...
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is
not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is
not present [20070126]
...
SELinux: initialized (dev securityfs, type securityfs), not configured
for labeling
audit(1178194702.785:4): avc: denied { mount } for pid=955
comm="modprobe" name="/" dev=securityfs ino=5875
scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023
tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
...
Steve
16 years, 8 months