KDE extragear
by Timothy Murphy
(1) Is it possible to install KDE extragear under Fedora?
If not, will it become possible under FC-4?
(I'm interested in kde-bluetooth.)
(2) Is extragear a separate package to extragear-[123],
or has the latter replaced the former?
--
Timothy Murphy
e-mail (<80k only): tim /at/ birdsnest.maths.tcd.ie
tel: +353-86-2336090, +353-1-2842366
s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland
18 years, 9 months
amaroK Visualization Issue Solved
by C.Beamer
Hi All,
I've solved my issue with not having visualizations with amaroK under FC4.
I was getting very frustrated over this issue. I was told that I needed
libvisual-plugins and I did receive some help on this list stating that
they were soon to be installed in the Extras repository. However, once
I was able to get that and install it, the visualizations in amaroK
still didn't work. I actually went so far as to uninstall amaroK and
went to the amaroK site to download the tarball and see if I could get
things working that way. My only issue would have been that KDE apps
don't seem to like the default version of gcc that is installed with FC4
(although, I now know how to get around that, again thanks to someone on
this list :-) )
Anyway, on the amaroK site, I was pointed to this link:
http://download.fedora.redhat.com/pub/fedora/linux/extras/4/i386/
If you look through the list that displays when the link is followed,
you will note that there are 4 packages for amaroK -
amarok
amarok-akode
amarok-arts
amarok-visualizations
Once I installed all these packages, I now have visualizations - both
amaroK visualizations and the 2 under xmms. As I'm writing this, I'm
listening to a CD that I saved to my hard drive with amaroK and
everything seems to be working just great!
Regards,
Colleen
18 years, 9 months
FC4 release
by Eric Tanguy
At what time fc4 will be released ?
--
Eric Tanguy | Nantes, France
<eric.tanguy(a)univ-nantes.fr>
Key : A4B8368F | Key Server : subkeys.pgp.net
Fedora Core release 3 (Heidelberg) sur athlon kernel 2.6.11-1.27_FC3
18 years, 9 months
Re: sendmail not working for relaying messages
by Janu Sundaram
>
> Hello,
>
> I am trying to setup Outlook Express (email client to setup mail accounts)
> , when I try to send mails outside my domain like @mydomain.com<http://mydomain.com>ie to yahoo or gmail or hotmail, I get this error message
>
> "The message could not be sent because one of the recipients was> rejected
> by the server. The rejected e-mail address was 'janu(a)cs.unm.edu'. Subject
> 'test', Account:'mail.relate24seven.com <http://mail.relate24seven.com><
> http://mail.relate24seven.com>> ',> Server: '65.103.191.30<http://65.103.191.30><
> http://65.103.191.30>', Protocol: SMTP, Server> Response: '550 5.7.1> <
> janu(a)cs.unm.edu>... Relaying denied', Port: 25, Secure(SSL): No,> Server
> Error: 550, Error Number: 0x800CCC79.
When I use pine on the server , I can send mails to everyone and recieve
from everyone.
> I can send mails to @relate24seven.com <http://relate24seven.com> in OE
> .If this is an OE problem , then I have the same problem with Thunderbird
> mail client too ; while sending emails it prompts fro password I type in the
> same password as used for incoming mail server which is the same as the
> outgoing one , and it does not work
>
> The following is the iptable file output :
> # Firewall configuration written by system-config-securitylevel
> # Manual customization of this file is not recommended.
> *filter
> :INPUT ACCEPT [0:0]
> :FORWARD ACCEPT [0:0]
> :OUTPUT ACCEPT [0:0]
> :RH-Firewall-1-INPUT - [0:0]
> -A INPUT -j RH-Firewall-1-INPUT
> -A FORWARD -j RH-Firewall-1-INPUT
> -A RH-Firewall-1-INPUT -i lo -j ACCEPT
> -A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT
> -A RH-Firewall-1-INPUT -p 50 -j ACCEPT
> -A RH-Firewall-1-INPUT -p 51 -j ACCEPT
> -A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251<http://224.0.0.251>-j ACCEPT
> -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT
> -A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
> -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j
> ACCEPT
> -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j
> ACCEPT
> -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j
> ACCEPT
> -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j
> ACCEPT
> -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 23 -j
> ACCEPT
> -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 25 -j
> ACCEPT
> -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 110 -j
> ACCEPT
> -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 143 -j
> ACCEPT
> -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 5901 -j
> ACCEPT
> -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
> COMMIT
>
> When I try to do nmap localhost it shows this :
>
> PORT STATE SERVICE
> 21/tcp open ftp
> 22/tcp open ssh
> 25/tcp open smtp
> 80/tcp open http
> 110/tcp open pop3
> 111/tcp open rpcbind
> 113/tcp open auth
> 143/tcp open imap
> 443/tcp open https
> 631/tcp open ipp
> 3306/tcp open mysql
> 5900/tcp open vnc
> 10000/tcp open snet-sensor-mgmt
>
> But when I try nmap 65.103.191.30 <http://65.103.191.30>, it shows this :
> (The 1658 ports scanned but not shown below are in state: closed)
> PORT STATE SERVICE
> 23/tcp open telnet
> 80/tcp open http
The following is the maillog output :
May 4 11:08:10 relate24seven sendmail[7908]: j44I89Gq007908:
ruleset=check_rcpt, arg1=<janu(a)cs.unm.edu>,
relay=nhpsde.heritage.unm.edu<http://nhpsde.heritage.unm.edu>[
64.106.114.26 <http://64.106.114.26>], reject=550 5.7.1 <janu(a)cs.unm.edu>...
Relaying denied
May 4 11:08:10 relate24seven sendmail[7908]: j44I89Gr007908:
ruleset=check_rcpt, arg1=<josh(a)relate247.com>,
relay=nhpsde.heritage.unm.edu<http://nhpsde.heritage.unm.edu>[
64.106.114.26 <http://64.106.114.26>], reject=550 5.7.1 <josh(a)relate247.com>...
Relaying denied
Any help with this?
>
>
>
18 years, 9 months
Install problem
by Ugo Bellavance
Hi,
I tried installing FC4 and it terminates with an exception. Anaconda
tells me to copy that and submit a bug, but the error message is quite
long. I was wondering if there was a way in the install to paste the
error message (I could copy it) in a file so that I can send it
somewhere (via ftp, scp?). It was a graphical install and the error
message looked like a pythin backtrace.
Regards,
Ugo
18 years, 9 months
ATI drivers
by Dylan Parry
Hi,
I know the proccess has been covered to death in this list, but has anyone
taken the time to write a tutorial explaining how to install the ATI
drivers (the ones for Radeon and up) from the ATI website?
--
Dylan Parry
http://www.webpageworkshop.co.uk - FREE Web tutorials and references
18 years, 9 months
Re: Killing idle SSH sessions?
by Brandon Laing
John,
Could you go into a bit more detail about this? I'm talking about any
kind of remote login via SSH, be it from a Windows or Linux system. I'd
just like to find a way for SSH to kill the session after 15 minutes of
inactivity to make sure someone doesn't leave an open session up on
their screen logged into a critical system.
John Summerfied wrote:
Hey list,
I'm curious to know if there is a way to have SSH kill idle sessions
after a set time in Fedora 2 and 3. I've been looking around and
haven't really found any way of doing this. The closest settings
I've found are these:
I think bash provides that capability (but it applies whether you
connect via ssh or login at tty1).
--
18 years, 9 months
nfs startup at boot fails
by korgull
Hi,
My nfs refuses to start up correctly at boot time. Even after I'm already
logged in and restart it (service nfs restart) it only works after restarting
it a few times.
It's not a big issue for me because it works well after restarting a few
times, but I wonder what's wrong with it as this certainly isn't normal
behaviour.
Anyone else suffer from this on FC4 ?
regards,
Marcel
18 years, 9 months
ANNOUNCE: Fedora Core and Bluetooth Dialup Networking HOWTO
by Dax Kelson
After looking all over the Internet I discovered that there wasn't any
guides that explained, in whole and in detail, how to get Internet
access via a Bluetooth capable cell phone.
If you would like to accomplish the following:
Laptop/PC ===(Bluetooth DUN)==> Cell phone ==(Cell network)==> Internet
You may be interested in a new Guru Labs Guide I just published.
I used a Fedora Core v4 laptop and a PalmOne Treo 650 smartphone with
Sprint service to write the guide.
The guide has three parts: Introduction, Treo 650 config, Linux config
http://www.gurulabs.com/goodies/Using_Linux_and_Bluetooth_DUN_with_the_Tr...
Any feedback or comments are very welcome.
Dax Kelson
Guru Labs
18 years, 9 months