Doubt about ulog and postgresql?
by Vinicius
Hello,
I did put the followed rule in the iptables "iptables -I
RH-Firewall-1-INPUT 8 -p tcp -j ULOG --ulog-prefix "Firewall: "", just
before the last rule (rulenum 8) that rejects all packets.
I did set up the file /etc/ulogd.conf to use a postgresql table such as
the example at /usr/share/doc/ulogd-1.21/, and I have created the
database ulogd and the table ulog as suggested there, with the same user
and password than the ones on ulogd.conf.
So, when I did do "/etc/init.d/ulogd restart" the system entered an
endeless loop.
Where could I find information about how to use postgresql with ulog
propely, please?
The relevants info:
kernel-2.6.10-1.766_FC3
kernel-utils-2.4-13.1.49_FC3
iptables-1.2.11-3.1.FC3
ulogd-1.21-1
ulogd-mysql-1.21-1
ulogd-pgsql-1.21-1
postgresql-7.4.7-3.FC3.1
postgresql-libs-7.4.7-3.FC3.1
postgresql-server-7.4.7-3.FC3.1
TIA,
Vinicius.
19 years, 1 month
system-config-bind-gui
by Mangesh Rakhunde
Hi
I configured my dns thru system-config-bind-gui but while saving it it hangs
and at the command prompt it throws an error "AttributeError: NS instance
has no attribute 'owner'. Any suggestions ?
Regards
Mangesh
19 years, 1 month
Throttling http on localhost to simulate dial-up connection
by Jim Higson
I'm using FC2 for web development at the moment, with Apache running on my
localhost.
The problem is that connecting to localhost is ultra-fast doesn't give a
realistic impression of the speed of the pages I create.
I've done some googling and seen there are modules called mod_bandwidth and
mod_throttle, but don't know what the difference between them is, nor how to
use them with Red Hat/Fedora Linux.
Can anyone suggest what I should do next? Ideally I would like to know which
module to use, if it is included with Fedora's httpd and some pointers on
configuring it.
Thanks,
--
Jim
19 years, 1 month
Intel 82801DB AC'97 audio controler issue
by Asmir Murselovic
After a week of trying to fix this problem I'm still
wondering if anyone managed to get around or fix this
sound problem?
I have Intel 82801DB (ICH4) AC'97 audio controler,
which doesn't work under 2.6.10-1.9_FC2.i686 kernel,
but works under 2.6.5-1.358/kernel. I have checked the
Alsa-mixer, made sure that mute is not checked and
volume is all the way up. I've gotten some suggestions
but unfortunately didn't help in my case.
Additional info:
/etc/modprobe.conf
alias eth0 8139too
alias snd-card-0 snd-intel8x0
install snd-intel8x0 /sbin/modprobe --ignore-install
snd-intel8x0 && /usr/sbin/alsactl restore >/dev/null
2>&1 || :
remove snd-intel8x0 { /usr/sbin/alsactl store
>/dev/null 2>&1 || : ; }; /sbin/modprobe - r
--ignore-remove snd-intel8x0
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
[root@laptop root]# lsmod
Module Size Used by
smbfs 62009 2
snd_pcm_oss 48117 0
snd_mixer_oss 17089 3 snd_pcm_oss
snd_intel8x0 32865 3
snd_ac97_codec 67361 1 snd_intel8x0
snd_pcm 93001 3
snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 28741 1 snd_pcm
snd_page_alloc 9669 2 snd_intel8x0,snd_pcm
snd 53413 8
snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 10017 3 snd
parport_pc 26501 0
lp 12077 0
parport 37257 2 parport_pc,lp
autofs4 23365 0
pcmcia 21189 4
yenta_socket 19137 1
pcmcia_core 51713 2 pcmcia,yenta_socket
sunrpc 155813 1
8139too 26305 0
mii 4801 1 8139too
ipt_REJECT 6593 1
ipt_state 2113 6
ip_conntrack 41205 1 ipt_state
iptable_filter 3777 1
ip_tables 16577 3
ipt_REJECT,ipt_state,iptable_filter
sg 34145 0
scsi_mod 122177 1 sg
microcode 6497 0
vfat 12737 1
fat 40033 1 vfat
dm_mod 56021 0
uhci_hcd 31577 0
ehci_hcd 34761 0
video 15813 0
toshiba_acpi 5845 0
button 6609 0
battery 9413 0
ac 4933 0
md5 4161 1
ipv6 235649 8
ext3 120905 2
jbd 69209 1 ext3
Any suggestions are appreciated, and please be
specific, cuz I'm new to this (Linux).
Thank you,
=====
Asmir Murselovic
__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail
19 years, 1 month
FC2 -> FC3 Upgrade on Toshiba Tecra 8100 Causes All PCM Sounds to be Scratchy - Workaround?
by Ian Wallace
Hello everyone. I've just recently upgraded my FC2 laptop to FC3 and to
my dismay the PCM playback (xine, xmms, aplay) all produce staticy
sounds. I've googled on the subject and tried the following to correct
it:
(As an aside sound in FC2 was spotty on this same machine ... however
during it's life time, and several kernels the sound did work at one
point, it always worked on FC1).
*) Made sure that my volumes aren't muted etc. I hear the sound, it's
just horrid.
*) Added commands to /etc/modprobe.conf so that the sound levels were
saved and restored ... that appears to work.
*) I think I've disabled the mysterious IEC958 device that everyone
mentions needs to be turned off (I think that's it). The machine has a
Yamaha chipset in it which displays as:
Vendor: Yamaha
Model: Corporation YMF-744B [DS-1S Audio Controller]
Module: snd-ymfpci
This is in Gnome. Sound doesn't work (for PCM) in Gnome or KDE same
issue - crackling sound).
*) The modules appear to have loaded. lsmod displays tons of snd-*
modules etc.
*) I tried setting up a /etc/asound.conf file so that it could 'duplex'
sounds being played over the PCM channel (this was off the ALSA
website).
*) I've tried to get sound working in Xine by switching the backend that
it uses (to no avail). I've also tried, under KDE, to change the
Gstreamer settings for the sink and source ... to no avail.
*) With this kernel I have typically had to set in /etc/grub.conf
acpi=off - not sure if that's messing things up. I removed that and
tried again but it didn't seem to help.
Where can I go for further information? Can I upgrade some packages? I
guess what I'm confused about is that CD playing works great (crystal
clear). PCM playback ... just crackles and hisses.
Any help would be greatly appreciated. Thanks! If this has been dealt
within the archives just point me to the link so that I can read about
it. I've tried searching but haven't really run across this same issue
(nor solved it with any of the advice that I found).
cheers
ian
19 years, 1 month
installing Xine
by jery_wang
okay, so i downloaded my tarball and unrolled it with the tar xfvz command... but now when i go to the directory i just created xine-lib-1.0 and try to run ./configure the terminal runs thru a buch of "checking this...checking that..." and at the end it returns the following error:
configure: error: no acceptable C compiler found in path
i'm running commands per the tutorial http://xinehq.de/index.php/faq#BUILDING
of course i will keep searching for answers but i thought i'd try here since i've had great results with this community.
thanks and happy hacking!
Chris
--
This is an email sent via the webforum on http://fcp.homelinux.org
19 years, 1 month
Fedora- redhat Linux
by Kash Chauhan
I AM VERY NEW AT Fedora/Redhat Linux
I have installed both on my PC successfully.
I would now like to write C++ and java applications and i am not sure
how i go about doing this.
Can you help, or guide me to some documentation please ?
I have spent a lot of money on the hardware and a lot of time on the
software installation and i am quite impressed at he simplicity of it
all and would like to use Linux kernal as well ( OF WHICH I HAVE NO
KNOWLEDGE )
So basically, I NEED AN IDIOTS GUIDE TO ALL THE ABOVE !!
Can you please help me ?
Kaushik Chauhan
19 years, 1 month
Strange problem with KDE/X/Totem
by Linux
Hi,
When i start my computer and logs in to kde, everything is fine, and I
can switch to consoles (alt+ctl+f2 etc.)
If I then try to start totem, or try to acces streaming video in firefox
(with mplayer) or similar, kde logs out, and i need to login again. Now
after the login it is not possile to go to the consoles. When i try the
screen freezes until i go back to kde.
Also, when i try to shutdown after this I can see a title bar of a
window with Totem... as the heading. (I cannot se the normal shutdown,
(the messages when it shuts down things)
Computer: Fujitsu Siemens Amilo A7600
Videocard ATI Radeon M320 (Detected and setup as Ati Mobility U1)
Kernel 2.6.9-1.667 (since the no. .10 kernel hangs at boot)
Have booted with ACPI=off noapic
[tortho@localhost ~]$ /sbin/lspci
00:00.0 Host bridge: ATI Technologies Inc AGP Bridge [IGP 320M] (rev 13)
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 320M] (rev 01)
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:03.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
00:04.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
00:06.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
00:08.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
Controller Audio Device (rev 02)
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 46)
00:0b.0 CardBus bridge: ENE Technology Inc CB1420 Cardbus Controller
(rev 01)
00:0b.1 CardBus bridge: ENE Technology Inc CB1420 Cardbus Controller
(rev 01)
00:0f.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1
THT
19 years, 1 month
grub segfaults on x86_64 SATA
by Phil Schaffner
Starting a new thread as the last related one "Re: Grub install broken
after kernel update" seemed to be generating more heat than light.
The problem (which seems to be similar to another one mentioned in the
thread mentioned above):
Installed a new larger/faster SATA disk, copied/configured/booted FC3
installation, and attempted to reconfigure grub to use the new /boot
partition. Attempting to run grub or grub-install to update boot record
results in "Segmentation fault". The old MBR is not changed. Cannot
create a grub floppy either due to segfault, although a grub floppy
created on a i686 system can be used to boot the x86_64 smp system, as
can the instance of grub created by anaconda on the original SATA disk.
Not sure if this may be an x86_64smp, or a SATA problem, or ???. The
problem has persisted through multiple kernel upgrades. Details can be
seen in the Bugzilla report
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=147600
Any suggestions appreciated, as would be any comments or action on the
Bugzilla item.
Thanks,
Phil
19 years, 1 month