Re: Help with NFS on FC1
by ayman sabry
Hi,
Are you sure that you did not install firewall on both server and client????
----- Original Message -----
From: Alexander Apprich <a.apprich(a)science-computing.de>
Date: Tue, 31 Aug 2004 15:17:05 +0200
To: For users of Fedora Core releases <fedora-list(a)redhat.com>
Subject: Re: Help with NFS on FC1
> Hi Chadley,
>
> not sure if I can really help you...
>
> Chadley Wilson wrote:
> > Greetings,
> >
> > Please can some one assist me here,
> > There is a spook in my FC1 PC config,
> >
> > The NFS firstly would not start,
> > Now I get it started and no-one has permission to access the fileshare.
> >
> > [root@preload root]# mount preload:/fc1 test/
> > mount: preload:/fc1 failed, reason given by server: Permission denied
> > [root@preload root]#ls -la /
> > snipped
> > drwxr-xr-x 6 rpcuser rpcuser 4096 Aug 31 05:01 fc1
> > snipped
> >
> >
> > What should the perms be here I had them as root and changed them,
> >
> > I have also tried these lines in /etc/exports
> > /fc1 192.168.2.0/255.255.255.0(ro,sync,no_root_squash)
> > and ^^
> > /fc1 192.168.2.0/255.255.255.255(ro,sync,no_root_squash)
> > ^^^
>
> Which one did you finally use?
>
> > /var/log/messages reports:
> >
> > Aug 31 12:53:52 preload rpc.mountd: refused mount request from
> > preload.teq.pinteq for /fc1 (/): no export entry
> >
>
> Does /fc1 really exist under / ?
>
> > [root@preload root]# exportfs
> > /fc1 192.168.2.0/255.255.255.0
> > [root@preload root]#
> >
>
> Try
>
> exportfs -av
>
> > Well I am very lost ?
> >
>
> Did you restart the nfsserver?
>
> >
>
> Alex
<< smime.p7s >>
>
> --
> fedora-list mailing list
> fedora-list(a)redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
--
______________________________________________
Check out the latest SMS services @ http://www.linuxmail.org
This allows you to send and receive SMS through your mailbox.
Powered by Outblaze
19 years, 8 months
Help with NFS on FC1
by Chadley Wilson
Greetings,
Please can some one assist me here,
There is a spook in my FC1 PC config,
The NFS firstly would not start,
Now I get it started and no-one has permission to access the fileshare.
[root@preload root]# mount preload:/fc1 test/
mount: preload:/fc1 failed, reason given by server: Permission denied
[root@preload root]#ls -la /
snipped
drwxr-xr-x 6 rpcuser rpcuser 4096 Aug 31 05:01 fc1
snipped
What should the perms be here I had them as root and changed them,
I have also tried these lines in /etc/exports
/fc1 192.168.2.0/255.255.255.0(ro,sync,no_root_squash)
and ^^
/fc1 192.168.2.0/255.255.255.255(ro,sync,no_root_squash)
^^^
/var/log/messages reports:
Aug 31 12:53:52 preload rpc.mountd: refused mount request from
preload.teq.pinteq for /fc1 (/): no export entry
[root@preload root]# exportfs
/fc1 192.168.2.0/255.255.255.0
[root@preload root]#
Well I am very lost ?
--
Chadley Wilson
Production Line Supervisor
Pinnacle Micro
Manufacturers of Proline Computers
====================================
Exercise freedom, Use LINUX
=====================================
19 years, 8 months
yum on a dial up with 2 hour limit
by sam tygier
yum on a dial up with 2 hour limit
this limits to about 20mb
i know its possible to download the rpm with something like gftp or wget and put them in the right folder, but this is a bit of a hassle.
any ideas?
thanks
ps
has anyone tried any yum GUIs, i see one from cobind, any experiences?
thanks
19 years, 8 months
problem with gnome-terminal
by arhinox
Hi everyone,
my gnome-terminal doesn't work! In my kde environment when I start
gnome-terminal it opens a window and it stays locked without any prompt.
Every shell in pre-existent gnome-terminal is still functioning, but if
I try to open a new tab/window that tab/window stays locked.
Anyone knows what's the reason of my problem and a solution (not a
reboot ;-) this is linux, not winnoz! )?
Tnx
PS: I updated my FC1 with testing fedora packages.
19 years, 8 months
Severe probs with madwifi and FC2
by Peter Boy
I suffer from severe problems using madwifi for my atheros 5211 card in
my Thinkpad T40p
Using kernel 2.6.7-1.494 I can compile the current CVS tree (with a lot
of warnings), can load the modules but can't establish a connection to
an AP (iwlist can´t detect anything). Using ATrpms kernel module
madwifi-2.6.7-1.494.2.2-0.8.5.5-7 I can establish a connection, but with
a lot of hardware error messages in messages (curiously only sometimes).
Using kernel 2.6.8-1.521 I can't compile the CVS tree. After applying
the patch mentioned previously on this list, I can compile and load the
module, but again can't establish a connection. Same result using ATrpms
kernel-module-madwifi-2.6.8-1.521-0.9.3.1-11.rhfc2.at.
Trying to use driverloader with kernel 2.6.8-1.5 results in a kernel
panic.
There are no problems using FC1 and kernel 2.4
Did someone else experience such problems and could manage to find a
solution?
Thanks
Peter
19 years, 8 months
FC2 AMD64 install error!
by Ram Kumar
I am a newbie to Linux. 12+ years of development experience in Mac +
Windows.
I have recently assembled myself an AMD 64 bit Athlon on MSI
motherboard, 512 MB Kingston RAM, 120 GB Seagate Hard Disk, Samsung
SyncMaster 793s monitor.
- I downloaded Fedora Core 2 x86 64
http://download.fedora.redhat.com/pub/fedora/linux/core/2/x86_64/iso/FC2
-x86_64-disc1.iso
http://download.fedora.redhat.com/pub/fedora/linux/core/2/x86_64/iso/FC2
-x86_64-disc2.iso
http://download.fedora.redhat.com/pub/fedora/linux/core/2/x86_64/iso/FC2
-x86_64-disc3.iso
http://download.fedora.redhat.com/pub/fedora/linux/core/2/x86_64/iso/FC2
-x86_64-disc4.iso
- When installing it does not initialize the X window system
- I tried installing in text mode, then switching to X Windows, but it
fails
- When at text login prompt, it keeps refreshing the display in an
attempt to start X Windows system
- Gives some error related to VESA driver & says 'unable to start X
Windows system'
- I installed my last copy of RedHat 9, which works beautifully on the
same system
- Checked the settings from this install for VESA driver, monitor
type, display frequency, etc... & applied to FC2 x86 64, but it still
does not start X Windows
I am zapped about what to do.
Can any expert help me here?
Regards, Ram
19 years, 8 months
Remote logoff
by Mark Haney
Is it possible to remotely log someone off? Cleanly? I have never
tried, but what I'd like to have is the ability to log off of GNOME a
user at my house via SSH.
--------------------------------------
Mark Haney
Network Administrator
InterAct Public Safety Systems
mhaney(a)interactsys.com
Fedora Core release 2 (Tettnang) Kernel: 2.6.8-1.521 GNU/Linux
16:03:51 up 7:58, 3 users, load average: 1.39, 1.67, 1.75
19 years, 8 months
problem with gnome-terminal
by arhinox
Hi everyone,
my gnome-terminal doesn't work! In my kde environment when I start
gnome-terminal it opens a window and it stays locked without any prompt.
Every shell in pre-existent gnome-terminal is still functioning, but if
I try to open a new tab/window that tab/window stays locked.
Anyone knows what's the reason of my problem and a solution (not a
reboot ;-) this is linux, not winnoz! )?
Tnx
PS: I updated my FC1 with testing fedora packages.
19 years, 8 months
problem with gnome-terminal
by arhinox
Hi everyone,
my gnome-terminal doesn't work! In my kde environment when I start
gnome-terminal it opens a window and it stays locked without any prompt.
Every shell in pre-existent gnome-terminal is still functioning, but if
I try to open a new tab/window that tab/window stays locked.
Anyone knows what's the reason of my problem and a solution (not a
reboot ;-) this is linux, not winnoz! )?
Tnx
PS: I updated my FC1 with testing fedora packages.
19 years, 8 months
OT: Help with Routing please..
by Sanjay Arora
Hi all
This question is not Fedora related, but could not find how to do this.
Being a newbie, decided to ask the masters ;-)
Network 1.
Ipcop firewall gateway..
Public address: 202.x.x.139 Netmask 255.255.255.248 given by ISP
DMZ: 192.168.100.1
Lan: 192.168.200.1
Gateway to Internet through 202.x.x.137 provided by ISP.
Network 2 (ISP Network...mostly hubs/repeaters & some switches)
NAT Gateway to internet through ISP provided by ISP through 172.16.0.1
My FC1 machine address: 172.16.0.133 Netmask 255.255.255.0, though I
have not set it, as the ISP does not allow me to go on the net through
this GW...only has given me an IP address to use on the local
net...basically to test my machine his network i.e. from outside my
network.
Other friends on ISP LAN connected through the ISP: 172.16.0.x
Now, the problem is that my FC1 machine though physically connected to
my public IP (three connections to the hub...my ISP, my Ipcop machine
and my FC1 machine), does not talk to my public IP.
Ping says destination unreachable...I used ethereal to check the
problem...my public IP firewall machine (202.x.x.139) is not responding
to FC1 (172.16.0.133) ARP requests. I have set route in both machines
by:
On 172.16.0.133
route add -host 202.x.x.139 dev eth2
On 202.x.x.139
route add -host 172.16.0.133 dev eth2
I think that the problem lies with different broadcast addresses, so the
202.x.x.139 machine is not getting the ARP request.
My firewall does not block ICMP requests.
Second problems is with my friends having 172.16.0.0 address with my ISP
and having a GW address of 172.16.0.1 (which my FC1 machine does not
have). They cant connect to my machine despite being on the same segment
of my ISP Lan, without going through the internet. As their Internet
bandwidth is capped...they cant transfer files with me. How to get their
machines to talk with mine, without going to the ISP Gateway...some are
Win machines & some Linux.
Hope someone will help me...wont say can help me because I know
otherwise ;-) Also, please provide pointers to some resources to this
type of (not normal) TCP/IP routing...so I can learn and maybe someday
be able to help some newbie like myself. Strangely...Google was not my
friend this time ;-(
My thanks for reading ALL the above.
With best regards.
Sanjay.
19 years, 8 months