Dear Fedora Dev Team,
I have attached a "System State" dump of a crash that occured during the
message that says "Starting Installation...This may take several minutes".
Let me know if you need more information.
Sincerely,
Arthur Baldwin
---------------------------------
Yahoo! Mail
Bring photos to life! New PhotoMail makes sharing a breeze.
Traceback (most recent call last):
File "/usr/lib/anaconda/gui.py", line 1253, in handleRenderCallback
self.currentWindow.renderCallback()
File "/usr/lib/anaconda/iw/progress_gui.py", line 245, in renderCallback
self.intf.icw.nextClicked()
File "/usr/lib/anaconda/gui.py", line 951, in nextClicked
self.dispatch.gotoNext()
File "/usr/lib/anaconda/dispatch.py", line 146, in gotoNext
self.moveStep()
File "/usr/lib/anaconda/dispatch.py", line 217, in moveStep
rc = apply(func, self.bindArgs(args))
File "/usr/lib/anaconda/backend.py", line 160, in doInstall
backend.doInstall(intf, id, instPath)
File "/usr/lib/anaconda/yuminstall.py", line 901, in doInstall
self.ayum.run(self.instLog, cb, intf)
File "/usr/lib/anaconda/yuminstall.py", line 425, in run
self.populateTs(keepold=0)
File "/usr/lib/anaconda/yuminstall.py", line 482, in populateTs
self.downloadHeader(txmbr.po)
File "/usr/lib/anaconda/yuminstall.py", line 546, in downloadHeader
yum.YumBase.downloadHeader(self, po)
File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 708, in
downloadHeader
cache=repo.http_caching != 'none',
File "/usr/lib/python2.4/site-packages/yum/repos.py", line 625, in get
http_headers=headers,
File "/usr/lib/python2.4/site-packages/urlgrabber/mirror.py", line 414, in
urlgrab
return self._mirror_try(func, url, kw)
File "/usr/lib/python2.4/site-packages/urlgrabber/mirror.py", line 400, in
_mirror_try
return func_ref( *(fullurl,), **kwargs )
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 618, in
urlgrab
return self._retry(opts, retryfunc, url, filename)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 547, in
_retry
return apply(func, (opts,) + args, {})
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 606, in
retryfunc
fo._do_grab()
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 920, in
_do_grab
block = self.read(bs)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 987, in
read
self._fill_buffer(amt)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 967, in
_fill_buffer
new = self.fo.read(readamount)
File "/usr/lib/python2.4/site-packages/urlgrabber/byterange.py", line 148, in
read
rslt = self.fo.read(size)
IOError: [Errno 5] Input/output error
Local variables in innermost frame:
self: <closed file '/mnt/source/Fedora/RPMS/mdadm-2.2-1.fc5.2.1.i386.rpm', mode
'rb' at 0xb3ca9b18>
size: 8192
Dispatcher instance, containing members:
intf: InstallInterface instance, containing members:
intf.ppw: InstallProgressWindow_NEW instance, containing members:
intf.ppw.intf: Already dumped
intf.ppw.timeStarted: -1
intf.ppw.sizeComplete: 0
intf.ppw.lastTimeEstimate: None
intf.ppw.pixcurnum: 0
intf.ppw.totalFiles: 177697
intf.ppw.totalProgress: <gtk.ProgressBar object (GtkProgressBar) at 0xb4b5316c>
intf.ppw.wrappedpixlist: 0
intf.ppw.pixtimer: None
intf.ppw.adpix: <gtk.Image object (GtkImage) at 0xb6e79af4>
intf.ppw.curPackage: {'summary': <gtk.Label object (GtkLabel) at
0xb4b52e8c>, 'package': <gtk.Label object (GtkLabel) at 0xc58bcfc>}
intf.ppw.estimateHistory: []
intf.ppw.ics: InstallControlState instance, containing members:
intf.ppw.ics.helpButtonEnabled: False
intf.ppw.ics.searchPath: ('/mnt/source/RHupdates', '/tmp/updates',
'./', '/usr/share/anaconda/')
intf.ppw.ics.grabNext: True
intf.ppw.ics.title: Installing Packages
intf.ppw.ics.htmlFile: installing
intf.ppw.ics.html:
intf.ppw.ics.helpEnabled: True
intf.ppw.ics.nextEnabled: False
intf.ppw.ics.prevEnabled: False
intf.ppw.ics.cw: InstallControlWindow instance, containing members:
intf.ppw.ics.cw.displayHelp: False
intf.ppw.ics.cw.releaseNotesViewerPid: None
intf.ppw.ics.cw.handle: 854
intf.ppw.ics.cw.releaseNotesStartViewerAttempts: 0
intf.ppw.ics.cw.releaseNotesType: text
intf.ppw.ics.cw.mainxml: <gtk.glade.XML object (PyGladeXML) at 0xb7a781bc>
intf.ppw.ics.cw.dispatch: Already dumped
intf.ppw.ics.cw.reloadRcQueued: 0
intf.ppw.ics.cw.ii: Already dumped
intf.ppw.ics.cw.currentWindow: Already dumped
intf.ppw.ics.cw.window: <gtk.Window object (GtkWindow) at 0xb792e5f4>
intf.ppw.ics.cw.installFrame: <gtk.Frame object (GtkFrame) at 0xb792e66c>
intf.ppw.ics.cw.releaseNotesStartViewer: 0
intf.ppw.ics.cw.id: InstallData instance, containing members:
intf.ppw.ics.cw.id.dbpath: None
intf.ppw.ics.cw.id.firewall: Firewall instance, containing members:
intf.ppw.ics.cw.id.firewall.portlist: [22:tcp]
intf.ppw.ics.cw.id.firewall.trustdevs: []
intf.ppw.ics.cw.id.firewall.enabled: 1
intf.ppw.ics.cw.id.rootParts: []
intf.ppw.ics.cw.id.upgradeDeps:
intf.ppw.ics.cw.id.upgradeRoot: []
intf.ppw.ics.cw.id.xsetup: XSetup instance, containing members:
intf.ppw.ics.cw.id.xsetup.skipx: 0
intf.ppw.ics.cw.id.xsetup.imposed_sane_default: 0
intf.ppw.ics.cw.id.xsetup.xhwstate: XF86HardwareState instance, containing
members:
intf.ppw.ics.cw.id.xsetup.xhwstate.probed_physical_height: 0
intf.ppw.ics.cw.id.xsetup.xhwstate.probed_video_ram: 31680
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard_PCIBus: None
intf.ppw.ics.cw.id.xsetup.xhwstate.colordepth: 16
intf.ppw.ics.cw.id.xsetup.xhwstate.monitor_name: Unknown monitor
intf.ppw.ics.cw.id.xsetup.xhwstate.dri_enabled: 1
intf.ppw.ics.cw.id.xsetup.xhwstate.monitor: monName: Unknown monitor
monID: Unprobed Monitor
monHoriz: 31.5-37.9
monVert: 50-70
physicalWidth: 0
physicalHeight: 0
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard_name: S3 Inc. VT8375
[ProSavage8 KM266/KL266]
intf.ppw.ics.cw.id.xsetup.xhwstate.video_ram: 0
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard_driver: savage
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard_options: []
intf.ppw.ics.cw.id.xsetup.xhwstate.vsync: 50-70
intf.ppw.ics.cw.id.xsetup.xhwstate.physical_height: 0
intf.ppw.ics.cw.id.xsetup.xhwstate.probed_vsync: 50-70
intf.ppw.ics.cw.id.xsetup.xhwstate.physical_width: 0
intf.ppw.ics.cw.id.xsetup.xhwstate.hsync: 31.5-37.9
intf.ppw.ics.cw.id.xsetup.xhwstate.probed_physical_width: 0
intf.ppw.ics.cw.id.xsetup.xhwstate.xconfig: None
intf.ppw.ics.cw.id.xsetup.xhwstate.all_resolutions: [640x480, 800x480,
800x600, 1024x600, 1024x768, 1152x768, 1152x864, 1280x800, 1280x960, 1280x1024, 1400x1050,
1440x900, 1600x1200, 1680x1050, 1900x1200, 1920x1200, 1920x1440, 2048x1536]
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard: primary: 0
vidCards: [<rhpxl.videocard.VideoCard instance at 0xb7e7b1ec>]
Primary Video Card Info:
device: None
driver : savage
descr : S3 Inc. VT8375 [ProSavage8 KM266/KL266]
vidRam: 31680
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard_PCIFn: None
intf.ppw.ics.cw.id.xsetup.xhwstate.probed_hsync: 31.5-37.9
intf.ppw.ics.cw.id.xsetup.xhwstate.resolution: 800x600
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard_PCIDev: None
intf.ppw.ics.cw.id.accounts: <Type Accounts>
intf.ppw.ics.cw.id.keyboard: Keyboard instance, containing members:
intf.ppw.ics.cw.id.keyboard.info: {'KEYBOARDTYPE': pc,
'KEYTABLE': us}
intf.ppw.ics.cw.id.keyboard.type: PC
intf.ppw.ics.cw.id.keyboard.beenset: 1
intf.ppw.ics.cw.id.keyboard._mods: KeyboardModels instance, containing
members:
intf.ppw.ics.cw.id.timezone: Timezone instance, containing members:
intf.ppw.ics.cw.id.timezone.utc: False
intf.ppw.ics.cw.id.timezone.utcOffset: 0
intf.ppw.ics.cw.id.timezone.arc: 0
intf.ppw.ics.cw.id.timezone.tz: America/Los_Angeles
intf.ppw.ics.cw.id.timezone.dst: 0
intf.ppw.ics.cw.id.mouse: FULLNAME="Generic - 3 Button Mouse (PS/2)"
MOUSETYPE="imps2"
XEMU3="no"
XMOUSETYPE="IMPS/2"
intf.ppw.ics.cw.id.backend: YumBackend instance, containing members:
intf.ppw.ics.cw.id.backend.ac: AnacondaYumConf instance, containing members:
intf.ppw.ics.cw.id.backend.ac.yumconfstr:
[main]
cachedir=/var/cache/yum
reposdir=/tmp/repos.d
debuglevel=2
logfile=/tmp/yum.log
pkgpolicy=newest
distroverpkg=redhat-release
tolerant=1
exactarch=1
retries=5
obsoletes=1
gpgcheck=0
installroot=/mnt/sysimage
exclude=*debuginfo*
[anaconda]
baseurl=file:///mnt/source
enabled=1
gpgcheck=0
gpgkey=file:///mnt/source/RPM-GPG-KEY-fedora
intf.ppw.ics.cw.id.backend.ac.configfile: /tmp/yum.conf
intf.ppw.ics.cw.id.backend.ac.root: /mnt/sysimage
intf.ppw.ics.cw.id.backend.ac.methodstr: file:///mnt/source
intf.ppw.ics.cw.id.backend.modeText: Installing %s-%s-%s.%s.
intf.ppw.ics.cw.id.backend.instPath: /mnt/sysimage
intf.ppw.ics.cw.id.backend.totalSize: 3009735
intf.ppw.ics.cw.id.backend.instLog: <open file
'/mnt/sysimage/root/install.log', mode 'w+' at 0xb3ca26e0>
intf.ppw.ics.cw.id.backend.ayum: <yuminstall.AnacondaYum object at
0xb7a52c4c>
intf.ppw.ics.cw.id.backend.method: CdromInstallMethod instance, containing
members:
intf.ppw.ics.cw.id.backend.method.messageWindow: <bound method
InstallInterface.messageWindow of <gui.InstallInterface instance at 0xb7a3d64c>>
intf.ppw.ics.cw.id.backend.method.splitmethod: True
intf.ppw.ics.cw.id.backend.method.intf: Already dumped
intf.ppw.ics.cw.id.backend.method.timestamp: 1140120001.114809
intf.ppw.ics.cw.id.backend.method.tree: /mnt/source
intf.ppw.ics.cw.id.backend.method.rootPath: /mnt/sysimage
intf.ppw.ics.cw.id.backend.method.loopbackFile:
/mnt/sysimage//rhinstall-stage2.img
intf.ppw.ics.cw.id.backend.method.progressWindow: <bound method
InstallInterface.progressWindow of <gui.InstallInterface instance at
0xb7a3d64c>>
intf.ppw.ics.cw.id.backend.method.device: hdb
intf.ppw.ics.cw.id.backend.method.currentMedia: [1, 2, 3, 4, 5]
intf.ppw.ics.cw.id.backend.totalFiles: 177697
intf.ppw.ics.cw.id.upgrade: None
intf.ppw.ics.cw.id.monitor: Already dumped
intf.ppw.ics.cw.id.iscsi: iscsi instance, containing members:
intf.ppw.ics.cw.id.methodstr: cdrom://hdb:/mnt/source
intf.ppw.ics.cw.id.fsset: FileSystemSet instance, containing members:
intf.ppw.ics.cw.id.fsset.messageWindow: <bound method
InstallInterface.messageWindow of <gui.InstallInterface instance at 0xb7a3d64c>>
intf.ppw.ics.cw.id.fsset.volumesCreated: 1
intf.ppw.ics.cw.id.fsset.progressWindow: <bound method
InstallInterface.progressWindow of <gui.InstallInterface instance at
0xb7a3d64c>>
intf.ppw.ics.cw.id.fsset.migratedfs: 1
intf.ppw.ics.cw.id.fsset.waitWindow: <bound method
InstallInterface.waitWindow of <gui.InstallInterface instance at 0xb7a3d64c>>
intf.ppw.ics.cw.id.fsset.entries: [fsentry -- device: VolGroup00 mountpoint:
None
fsystem: volume group (LVM) format: 1
ismounted: 0 options: 'defaults'
bytesPerInode: 4096 label: None
, fsentry -- device: hda2 mountpoint: None
fsystem: physical volume (LVM) format: 1
ismounted: 0 options: 'defaults'
bytesPerInode: 4096 label: None
, fsentry -- device: VolGroup00/LogVol00 mountpoint: /
fsystem: ext3 format: 1
ismounted: 1 options: 'defaults'
bytesPerInode: 4096 label: None
, fsentry -- device: hda1 mountpoint: /boot
fsystem: ext3 format: 1
ismounted: 1 options: 'defaults'
bytesPerInode: 4096 label: /boot
, fsentry -- device: devpts mountpoint: /dev/pts
fsystem: devpts format: 0
ismounted: 0 options: 'gid=5,mode=620'
bytesPerInode: 4096 label: None
, fsentry -- device: shm mountpoint: /dev/shm
fsystem: tmpfs format: 0
ismounted: 0 options: 'defaults'
bytesPerInode: 4096 label: None
, fsentry -- device: proc mountpoint: /proc
fsystem: proc format: 0
ismounted: 1 options: 'defaults'
bytesPerInode: 4096 label: None
, fsentry -- device: sys mountpoint: /sys
fsystem: sysfs format: 0
ismounted: 1 options: 'defaults'
bytesPerInode: 4096 label: None
, fsentry -- device: VolGroup00/LogVol01 mountpoint: swap
fsystem: swap format: 1
ismounted: 1 options: 'defaults'
bytesPerInode: 4096 label: None
]
intf.ppw.ics.cw.id.fsset.mountcount: 5
intf.ppw.ics.cw.id.desktop: Desktop instance, containing members:
intf.ppw.ics.cw.id.desktop.info: {}
intf.ppw.ics.cw.id.desktop.runlevel: 3
intf.ppw.ics.cw.id.x_already_set: 0
intf.ppw.ics.cw.id.partitions: Partitions instance, containing members:
intf.ppw.ics.cw.id.partitions.useFdisk: 0
intf.ppw.ics.cw.id.partitions.useAutopartitioning: 1
intf.ppw.ics.cw.id.partitions.autoClearPartType: 1
intf.ppw.ics.cw.id.partitions.nextUniqueID: 11
intf.ppw.ics.cw.id.partitions.reinitializeDisks: 0
intf.ppw.ics.cw.id.partitions.autoClearPartDrives: [hda]
intf.ppw.ics.cw.id.partitions.zeroMbr: 0
intf.ppw.ics.cw.id.partitions.isKickstart: 0
intf.ppw.ics.cw.id.partitions.requests: [New Part Request -- mountpoint: /boot
uniqueID: 9
type: ext3 format: 1 badblocks: None
device: hda1 drive: ['hda'] primary: None
size: 100 grow: 0 maxsize: None
start: None end: None migrate: None fslabel: None origfstype: None
bytesPerInode: 4096 options: 'None'
, LV Request -- mountpoint: / uniqueID: 8
type: ext3 format: 1 badblocks: None
size: 77920 lvname: LogVol00 volgroup: 7
bytesPerInode: 4096 options: 'None'
, VG Request -- name: VolGroup00 uniqueID: 7
format: 1 pesize: 32768
physvols: [6]
, New Part Request -- mountpoint: None uniqueID: 6
type: physical volume (LVM) format: 1 badblocks: None
device: hda2 drive: ['hda'] primary: None
size: 0 grow: 1 maxsize: None
start: None end: None migrate: None fslabel: None origfstype: None
bytesPerInode: 4096 options: 'None'
, LV Request -- mountpoint: None uniqueID: 10
type: swap format: 1 badblocks: None
size: 448 lvname: LogVol01 volgroup: 7
bytesPerInode: 4096 options: 'None'
]
intf.ppw.ics.cw.id.partitions.autoPartitionRequests: [New Part Request --
mountpoint: None uniqueID: None
type: physical volume (LVM) format: 1 badblocks: None
device: None drive: None primary: None
size: 0 grow: 1 maxsize: None
start: None end: None migrate: None fslabel: None origfstype: None
bytesPerInode: 4096 options: 'None'
, VG Request -- name: lvm uniqueID: None
format: 1 pesize: 32768
physvols: []
, LV Request -- mountpoint: / uniqueID: None
type: ext3 format: 1 badblocks: None
size: 1024 lvname: LogVol00 volgroup: lvm
bytesPerInode: 4096 options: 'None'
, New Part Request -- mountpoint: /boot uniqueID: None
type: ext3 format: 1 badblocks: None
device: None drive: None primary: None
size: 100 grow: 0 maxsize: None
start: None end: None migrate: None fslabel: None origfstype: None
bytesPerInode: 4096 options: 'None'
, LV Request -- mountpoint: None uniqueID: None
type: swap format: 1 badblocks: None
size: 224 lvname: LogVol01 volgroup: lvm
bytesPerInode: 4096 options: 'None'
]
intf.ppw.ics.cw.id.partitions.deletes: [lvname: LogVol00 vgname: VolGroup00
, vgname: VolGroup00
, drive: hda start: 208845 end: 160826714
, lvname: LogVol01 vgname: VolGroup00
, drive: hda start: 63 end: 208844
]
intf.ppw.ics.cw.id.firstboot: 0
intf.ppw.ics.cw.id.diskset: DiskSet instance, containing members:
intf.ppw.ics.cw.id.diskset.disks: {'hda': <PedDisk object at
0xb7eaf770>}
intf.ppw.ics.cw.id.diskset.onlyPrimary: None
intf.ppw.ics.cw.id.upgradeInfoFound: None
intf.ppw.ics.cw.id.zfcp: ZFCP instance, containing members:
intf.ppw.ics.cw.id.zfcp.description: zSeries machines can access
industry-standard SCSI devices via Fibre Channel (FCP). You need to provide 5 parameters
for each device: a 16 bit device number, a 16bit SCSI ID, a 64 bit World Wide Port Name
(WWPN), a 16bit SCSI LUN and a 64 bit FCP LUN.
intf.ppw.ics.cw.id.zfcp.fcpdevices: []
intf.ppw.ics.cw.id.zfcp.options: [('Device number', 1, 'You have
not specified a device number or the number is invalid', <bound method
ZFCP.sanitizeDeviceInput of <zfcp.ZFCP instance at 0xb7396c2c>>, <bound method
ZFCP.checkValidDevice of <zfcp.ZFCP instance at 0xb7396c2c>>), ('SCSI
Id', 0, 'You have not specified a SCSI ID or the ID is invalid.', <bound
method ZFCP.sanitizeHexInput of <zfcp.ZFCP instance at 0xb7396c2c>>, <bound
method ZFCP.checkValidID of <zfcp.ZFCP instance at 0xb7396c2c>>),
('WWPN', 1, 'You have not specified a worldwide port name or the name is
invalid.', <bound method ZFCP.sanitizeHexInput of <zfcp.ZFCP instance at
0xb7396c2c>>, <bound method ZFCP.checkValid64BitHex of <zfcp.ZFCP instance at
0xb7396c2c>>), ('SCSI LUN', 0, 'You have not specified a SCSI LUN or the
number is invalid.', <bound method ZFCP.sanitizeHexInput of <zfcp.ZFCP instance
at 0xb7396c2c>>, <bound method ZFCP.checkValidID of <zfcp.ZFCP instance at
0xb7396c2c>>), ('FCP LUN'!
, 1, 'You have not specified a FCP LUN or the number is invalid.', <bound
method ZFCP.sanitizeFCPLInput of <zfcp.ZFCP instance at 0xb7396c2c>>, <bound
method ZFCP.checkValid64BitHex of <zfcp.ZFCP instance at 0xb7396c2c>>)]
intf.ppw.ics.cw.id.grpset: None
intf.ppw.ics.cw.id.upgradeRemove: []
intf.ppw.ics.cw.id.excludeDocs: 0
intf.ppw.ics.cw.id.auth: --enableshadow --enablemd5
intf.ppw.ics.cw.id.instProgress: Already dumped
intf.ppw.ics.cw.id.dependencies: []
intf.ppw.ics.cw.id.bootloader: x86BootloaderInfo instance, containing members:
intf.ppw.ics.cw.id.bootloader.doUpgradeOnly: 0
intf.ppw.ics.cw.id.bootloader.above1024: 0
intf.ppw.ics.cw.id.bootloader.defaultDevice: mbr
intf.ppw.ics.cw.id.bootloader.pure: None
intf.ppw.ics.cw.id.bootloader.args: KernelArguments instance, containing
members:
intf.ppw.ics.cw.id.bootloader.args.args:
intf.ppw.ics.cw.id.bootloader.kernelLocation: /boot/
intf.ppw.ics.cw.id.bootloader.device: hda
intf.ppw.ics.cw.id.bootloader.configfile: /etc/lilo.conf
intf.ppw.ics.cw.id.bootloader.kickstart: 0
intf.ppw.ics.cw.id.bootloader.serialOptions: None
intf.ppw.ics.cw.id.bootloader.useGrubVal: 1
intf.ppw.ics.cw.id.bootloader.serialDevice: None
intf.ppw.ics.cw.id.bootloader.images: BootImages instance, containing
members:
intf.ppw.ics.cw.id.bootloader.images.default: VolGroup00/LogVol00
intf.ppw.ics.cw.id.bootloader.images.images: {'VolGroup00/LogVol00':
('linux', 'Fedora Core', 'ext3')}
intf.ppw.ics.cw.id.bootloader.drivelist: [hda]
intf.ppw.ics.cw.id.bootloader.serial: 0
intf.ppw.ics.cw.id.bootloader.forceLBA32: 0
intf.ppw.ics.cw.id.extraModules: []
intf.ppw.ics.cw.id.network: Network instance, containing members:
intf.ppw.ics.cw.id.network.hostname: localhost.localdomain
intf.ppw.ics.cw.id.network.overrideDHCPhostname: 0
intf.ppw.ics.cw.id.network.netdevices: {'eth1': DEVICE=eth1
BOOTPROTO=dhcp
HWADDR=00:08:54:28:18:90
ONBOOT=yes
, 'eth0': DEVICE=eth0
BOOTPROTO=dhcp
HWADDR=00:0D:87:A9:C3:A8
ONBOOT=no
}
intf.ppw.ics.cw.id.network.primaryNS: None
intf.ppw.ics.cw.id.network.firstnetdevice: eth0
intf.ppw.ics.cw.id.network.ternaryNS: None
intf.ppw.ics.cw.id.network.isConfigured: 0
intf.ppw.ics.cw.id.network.domains: []
intf.ppw.ics.cw.id.network.secondaryNS: None
intf.ppw.ics.cw.id.network.gateway: None
intf.ppw.ics.cw.id.instClass: InstallClass instance, containing members:
intf.ppw.ics.cw.id.floppyDevice: fd0
intf.ppw.ics.cw.id.isHeadless: 0
intf.ppw.ics.cw.id.videocard: Already dumped
intf.ppw.ics.cw.id.instLanguage: Language instance, containing members:
intf.ppw.ics.cw.id.instLanguage.info: {'LANG': en_US.UTF-8,
'SYSFONT': latarcyrheb-sun16}
intf.ppw.ics.cw.id.instLanguage.default: en_US.UTF-8
intf.ppw.ics.cw.id.instLanguage.current: en_US.UTF-8
intf.ppw.ics.cw.id.security: Security instance, containing members:
intf.ppw.ics.cw.id.security.selinux: 1
intf.ppw.ics.cw.id.upgradeSwapInfo: None
intf.ppw.ics.cw.dir: 1
intf.ppw.ics.cw.help: <TextViewBrowser object (GtkTextView) at 0xb792e694>
intf.ppw.progress: <gtk.ProgressBar object (GtkProgressBar) at 0xb4b53b44>
intf.ppw.pixmaps: []
intf.ppw.filesComplete: 0
intf.ppw.adbox: <gtk.EventBox object (GtkEventBox) at 0xb4b53b1c>
intf.ppw.numTotal: 1112
intf.ppw.initialTimeEstimate: None
intf.ppw.totalSize: 3009735
intf.ppw.remainingTimeLabel: <gtk.Label object (GtkLabel) at 0xb4b53194>
intf.ppw.numComplete: 0
intf.ppw.pkgstatus: None
intf.icw: Already dumped
intf.runres: 800x600
intf.dispatch: Already dumped
instPath: /mnt/sysimage
dispatch: Already dumped
skipSteps: {'upgradecontinue': 1, 'zfcpconfig': 2, 'findinstall':
1, 'upgrademigfind': 1, 'upgradeswapsuggestion': 1,
'confirmupgrade': 1, 'bootloaderadvanced': 1, 'upgrademount': 1,
'installtype': 2, 'upgbootloader': 1, 'addswap': 1,
'upgrademigratefs': 1, 'iscsi': 1}
method: Already dumped
step: 40
flags: Flags instance, containing members:
flags.flags: {'virtpconsole': None, 'expert': 0, 'selinux': 1,
'iscsi': 0, 'rootpath': 0, 'autostep': 0,
'setupFilesystems': 1, 'usevnc': 0, 'autoscreenshot': 0,
'test': 0, 'serial': 0, 'dmraid': 1}
firstStep: 0
id: Already dumped
dir: 1
backend: Already dumped
/tmp/syslog:
<5>Linux version 2.6.15-1.1955_FC5 (bhcompile(a)ls20-bc1-14.build.redhat.com) (gcc
version 4.1.0 20060214 (Red Hat 4.1.0-0.27)) #1 Wed Feb 15 15:46:10 EST 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
<4> BIOS-e820: 000000000dff0000 - 000000000dff8000 (ACPI data)
<4> BIOS-e820: 000000000dff8000 - 000000000e000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>223MB LOWMEM available.
<4>Using x86 segment limits to approximate NX protection
<7>On node 0 totalpages: 57328
<7> DMA zone: 4096 pages, LIFO batch:0
<7> DMA32 zone: 0 pages, LIFO batch:0
<7> Normal zone: 53232 pages, LIFO batch:15
<7> HighMem zone: 0 pages, LIFO batch:0
<6>DMI 2.3 present.
<7>ACPI: RSDP (v000 AMI ) @ 0x000fa730
<7>ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x0dff0000
<7>ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x0dff0030
<7>ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x808
<6>ACPI: Local APIC disabled (-2); pass 'lapic' to re-enable.
<4>Allocating PCI resources starting at 10000000 (gap: 0e000000:f0c00000)
<4>Built 1 zonelists
<5>Kernel command line: initrd=initrd.img BOOT_IMAGE=vmlinuz
<7>mapped APIC to ffffd000 (011c2000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>CPU 0 irqstacks, hard=c03c5000 soft=c03c4000
<4>PID hash table entries: 1024 (order: 10, 16384 bytes)
<4>Detected 1100.326 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour VGA+ 80x25
<4>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 218468k/229312k available (1886k kernel code, 10180k reserved, 750k data,
168k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 2204.34 BogoMIPS (lpj=4408691)
<6>Security Framework v1.0.0 initialized
<6>SELinux: Initializing.
<6>SELinux: Starting in permissive mode
<6>selinux_register_security: Registering secondary module capability
<6>Capability LSM initialized as secondary
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000
00000000 00000000
<7>CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000
00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After all inits, caps: 0383f1ff c1cbf9ff 00000000 00000020 00000000 00000000
00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: AMD mobile AMD Athlon(tm) 4 stepping 02
<6>Checking 'hlt' instruction... OK.
<4>ACPI: setting ELCR to 0200 (from 8c20)
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 4932k freed
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
<6>PCI: Using configuration type 1
<6>ACPI: Subsystem revision 20060127
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<4>PCI quirk: region 0800-087f claimed by vt8235 PM
<4>PCI quirk: region 0400-040f claimed by vt8235 SMB
<7>Boot video device is 0000:01:00.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Power Resource [URP1] (off)
<6>ACPI: Power Resource [URP2] (off)
<6>ACPI: Power Resource [FDDP] (off)
<6>ACPI: Power Resource [LPTP] (off)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 10 devices
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
<6>PCI: Bridge: 0000:00:01.0
<6> IO window: disabled.
<6> MEM window: dfd00000-dfefffff
<6> PREFETCH window: cfc00000-dfbfffff
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<5>audit(1141146623.096:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>SELinux: Registering netfilter hooks
<6>Initializing Cryptographic API
<4>ksign: Installing public key data
<4>Loading keyring
<4>- Added public key CA7484018F37AD51
<4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>ACPI: Processor [CPU1] (supports 16 throttling states)
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<6>Linux agpgart interface v0.101 (c) Dave Jones
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: IDE controller at PCI slot 0000:00:11.1
<4>ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
<6>PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
<6>VP_IDE: chipset revision 6
<6>VP_IDE: not 100% native mode: will probe irqs later
<6>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
<6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
<7>Probing IDE interface ide0...
<4>hda: HDS728080PLAT20, ATA DISK drive
<4>hdb: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>Probing IDE interface ide1...
<6>hda: max request size: 512KiB
<6>hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(33)
<6>hda: cache flushes supported
<6> hda: hda1 hda2
<6>hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<4>ide-floppy driver 0.99.newide
<6>usbcore: registered new driver libusual
<6>usbcore: registered new driver hiddev
<6>usbcore: registered new driver usbhid
<6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
<6>mice: PS/2 mouse device common for all mice
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>NET: Registered protocol family 2
<6>input: AT Translated Set 2 keyboard as /class/input/input0
<4>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>TCP established hash table entries: 8192 (order: 5, 131072 bytes)
<4>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>TCP bic registered
<6>Initializing IPsec netlink socket
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<4>Using IPI Shortcut mode
<4>ACPI wakeup devices:
<4>PCI0 USB1 USB2 USB3 EHCI UAR1 AC9 MC9 ILAN SLT1 SLT2 SLPB
<6>ACPI: (supports S0 S1 S4 S5)
<6>Freeing unused kernel memory: 168k freed
<4>Write protecting the kernel read-only data: 344k
<6>loop: loaded (max 8 devices)
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<6>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
<6>input: PC Speaker as /class/input/input2
<6>Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
<5>SCSI subsystem initialized
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
<7>PCI: setting IRQ 5 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 5 (level, low)
-> IRQ 5
<6>ehci_hcd 0000:00:10.3: EHCI Host Controller
<6>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:10.3: irq 5, io mem 0xdffffe00
<6>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 6 ports detected
<6>USB Universal Host Controller Interface driver v2.3
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<7>PCI: setting IRQ 11 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low)
-> IRQ 11
<6>uhci_hcd 0000:00:10.0: UHCI Host Controller
<6>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e000
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
<7>PCI: setting IRQ 10 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low)
-> IRQ 10
<6>uhci_hcd 0000:00:10.1: UHCI Host Controller
<6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:10.1: irq 10, io base 0x0000e400
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 15
<7>PCI: setting IRQ 15 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 15 (level, low)
-> IRQ 15
<6>uhci_hcd 0000:00:10.2: UHCI Host Controller
<6>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:10.2: irq 15, io base 0x0000e800
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
<6>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low)
-> IRQ 11
<6>eth0: VIA Rhine II at 0xdffffd00, 00:0d:87:a9:c3:a8, IRQ 11.
<6>eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
<6>8139too Fast Ethernet driver 0.9.27
<6>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 10 (level, low)
-> IRQ 10
<6>eth1: RealTek RTL8139 at 0xce912f00, 00:08:54:28:18:90, IRQ 10
<7>eth1: Identified 8139 chip type 'RTL-8100B/8139D'
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<4>Unable to load NLS charset utf8
<4>Unable to load NLS charset utf8
<7>ISO 9660 Extensions: RRIP_1991A
<4>Unable to identify CD-ROM format.
<4>VFS: Can't find an ext2 filesystem on dev loop0.
<6>security: 3 users, 6 roles, 1132 types, 133 bools, 1 sens, 256 cats
<6>security: 55 classes, 37574 rules
<6>SELinux: Completing initialization.
<6>SELinux: Setting up existing superblocks.
<6>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
<6>SELinux: initialized (dev hdb, type iso9660), uses genfs_contexts
<6>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
<6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<6>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<6>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
<6>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
<6>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<6>SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
<6>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
<6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
<6>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<6>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<6>SELinux: initialized (dev proc, type proc), uses genfs_contexts
<6>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
<6>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<6>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>audit(1141146637.244:2): avc: denied { transition } for pid=423
comm="loader" name="bash" dev=loop0 ino=1493
scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:system_r:anaconda_t:s0
tclass=process
<6>md: raid0 personality registered for level 0
<6>md: raid1 personality registered for level 1
<6>raid5: automatically using best checksumming function: pIII_sse
<4> pIII_sse : 2935.000 MB/sec
<4>raid5: using function: pIII_sse (2935.000 MB/sec)
<6>md: raid5 personality registered for level 5
<6>md: raid4 personality registered for level 4
<4>raid6: int32x1 398 MB/s
<4>raid6: int32x2 444 MB/s
<4>raid6: int32x4 419 MB/s
<4>raid6: int32x8 306 MB/s
<4>raid6: mmxx1 881 MB/s
<4>raid6: mmxx2 1504 MB/s
<4>raid6: sse1x1 820 MB/s
<4>raid6: sse1x2 1429 MB/s
<4>raid6: using algorithm sse1x2 (1429 MB/s)
<6>md: raid6 personality registered for level 6
<6>JFS: nTxBlock = 1748, nTxLock = 13990
<6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
<6>SGI XFS Quota Management subsystem
<6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel(a)redhat.com
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>SELinux: initialized (dev dm-0, type ext3), uses xattr
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>SELinux: initialized (dev hda1, type ext3), uses xattr
<6>Adding 458744k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
across:458744k
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on dm-0, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>SELinux: initialized (dev dm-0, type ext3), uses xattr
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>SELinux: initialized (dev hda1, type ext3), uses xattr
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<4>Unable to load NLS charset utf8
<4>Unable to load NLS charset utf8
<7>ISO 9660 Extensions: RRIP_1991A
<6>SELinux: initialized (dev hdb, type iso9660), uses genfs_contexts
<4>hdb: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
<4>hdb: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03
}
<4>ide: failed opcode was: unknown
<4>end_request: I/O error, dev hdb, sector 3779024
<3>Buffer I/O error on device hdb, logical block 944756
/tmp/anaconda.log:
17:10:25 INFO : 223848 kB are available
17:10:25 INFO : modules to insert cramfs fat vfat sunrpc lockd nfs_acl nfs loop isofs
floppy edd pcspkr squashfs
17:10:25 INFO : loaded cramfs from /modules/modules.cgz
17:10:25 INFO : loaded fat from /modules/modules.cgz
17:10:25 INFO : loaded vfat from /modules/modules.cgz
17:10:25 INFO : loaded sunrpc from /modules/modules.cgz
17:10:25 INFO : loaded lockd from /modules/modules.cgz
17:10:25 INFO : loaded nfs_acl from /modules/modules.cgz
17:10:25 INFO : loaded nfs from /modules/modules.cgz
17:10:25 INFO : loaded loop from /modules/modules.cgz
17:10:25 INFO : loaded floppy from /modules/modules.cgz
17:10:25 INFO : loaded edd from /modules/modules.cgz
17:10:25 INFO : loaded pcspkr from /modules/modules.cgz
17:10:25 INFO : loaded squashfs from /modules/modules.cgz
17:10:25 DEBUG : module(s) isofs not found
17:10:25 INFO : inserted /tmp/cramfs.ko
17:10:25 INFO : inserted /tmp/fat.ko
17:10:25 INFO : inserted /tmp/vfat.ko
17:10:25 INFO : inserted /tmp/sunrpc.ko
17:10:25 INFO : inserted /tmp/lockd.ko
17:10:26 INFO : inserted /tmp/nfs_acl.ko
17:10:26 INFO : inserted /tmp/nfs.ko
17:10:26 INFO : inserted /tmp/loop.ko
17:10:26 INFO : inserted /tmp/floppy.ko
17:10:26 INFO : inserted /tmp/edd.ko
17:10:26 INFO : inserted /tmp/pcspkr.ko
17:10:26 INFO : inserted /tmp/squashfs.ko
17:10:26 INFO : load module set done
17:10:26 INFO : modules to insert cdrom ide-cd
17:10:26 DEBUG : module(s) cdrom ide-cd not found
17:10:26 INFO : load module set done
17:10:26 INFO : modules to insert scsi_mod sd_mod sr_mod
17:10:26 INFO : loaded scsi_mod from /modules/modules.cgz
17:10:26 INFO : loaded sd_mod from /modules/modules.cgz
17:10:26 INFO : loaded sr_mod from /modules/modules.cgz
17:10:26 INFO : inserted /tmp/scsi_mod.ko
17:10:26 INFO : inserted /tmp/sd_mod.ko
17:10:26 INFO : inserted /tmp/sr_mod.ko
17:10:26 INFO : load module set done
17:10:26 INFO : looking for usb controllers
17:10:26 INFO : found USB controller ehci-hcd
17:10:26 INFO : modules to insert ehci-hcd
17:10:27 INFO : loaded ehci-hcd from /modules/modules.cgz
17:10:27 INFO : inserted /tmp/ehci-hcd.ko
17:10:27 INFO : load module set done
17:10:27 INFO : found USB controller uhci-hcd
17:10:27 INFO : modules to insert uhci-hcd
17:10:27 INFO : loaded uhci-hcd from /modules/modules.cgz
17:10:27 INFO : inserted /tmp/uhci-hcd.ko
17:10:27 INFO : load module set done
17:10:27 INFO : found USB controller uhci-hcd
17:10:27 INFO : modules to insert
17:10:27 INFO : load module set done
17:10:27 INFO : found USB controller uhci-hcd
17:10:27 INFO : modules to insert
17:10:27 INFO : load module set done
17:10:27 DEBUG : waiting for usb to become stable...
17:10:29 DEBUG : 2 seconds.
17:10:29 INFO : modules to insert hid keybdev
17:10:29 DEBUG : module(s) hid keybdev not found
17:10:29 INFO : load module set done
17:10:30 INFO : no firewire controller found
17:10:30 DEBUG : no pcic controller found
17:10:30 DEBUG : probing buses
17:10:30 DEBUG : finished bus probing
17:10:30 DEBUG : ignoring driverless device VIA Technologies, Inc. Unknown device 3177
17:10:30 DEBUG : ignoring driverless device VIA Technologies, Inc. Unknown device b091
17:10:30 DEBUG : ignoring driverless device VIA Technologies, Inc. Unknown device 3116
17:10:30 DEBUG : ignoring driverless device VIA Technologies, Inc. Unknown device 3059
17:10:30 DEBUG : ignoring driverless device VIA Technologies, Inc. Unknown device 3068
17:10:30 DEBUG : ignoring driverless device S3 Inc. Unknown device 8d04
17:10:30 DEBUG : ignoring driverless device VIA Technologies, Inc. Unknown device 0571
17:10:30 INFO : modules to insert mii via-rhine 8139too
17:10:31 INFO : loaded mii from /modules/modules.cgz
17:10:31 INFO : loaded via-rhine from /modules/modules.cgz
17:10:31 INFO : loaded 8139too from /modules/modules.cgz
17:10:31 INFO : inserted /tmp/mii.ko
17:10:31 INFO : inserted /tmp/via-rhine.ko
17:10:31 INFO : inserted /tmp/8139too.ko
17:10:31 INFO : load module set done
17:10:31 INFO : trying to mount CD device hdb
17:10:32 INFO : mntloop loop0 on /mnt/runtime as /mnt/source/Fedora/base/stage2.img fd
is 15
17:10:32 DEBUG : MD5SUM -> 51ac7180d93a2ab67cb55b26f35dcf92
17:10:32 DEBUG : skipsectors = 15
17:10:32 INFO : supported = 0
17:10:35 INFO : Loading SELinux policy
17:10:37 INFO : getting ready to spawn shell now
17:10:37 INFO : modules to insert cdrom ide-cd
17:10:37 DEBUG : module(s) cdrom ide-cd not found
17:10:37 INFO : load module set done
17:10:37 INFO : modules to insert
17:10:37 INFO : load module set done
17:10:37 DEBUG : probing buses
17:10:38 DEBUG : finished bus probing
17:10:38 DEBUG : ignoring driverless device VIA Technologies, Inc. VT8235 ISA Bridge
17:10:38 DEBUG : ignoring driverless device VIA Technologies, Inc. VT8633 [Apollo Pro266
AGP]
17:10:38 DEBUG : ignoring driverless device VIA Technologies, Inc. VT8375 [KM266/KL266]
Host Bridge
17:10:38 DEBUG : ignoring driverless device VIA Technologies, Inc. VT8233/A/8235/8237
AC97 Audio Controller
17:10:38 DEBUG : ignoring driverless device VIA Technologies, Inc. AC'97 Modem
Controller
17:10:38 DEBUG : ignoring driverless device S3 Inc. VT8375 [ProSavage8 KM266/KL266]
17:10:38 DEBUG : ignoring driverless device VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
17:10:38 INFO : modules to insert
17:10:38 INFO : load module set done
17:10:38 INFO : modules to insert md raid0 raid1 xor raid5 raid6 msdos jbd ext3
reiserfs jfs exportfs xfs dm-mod dm-zero dm-mirror dm-snapshot
17:10:38 INFO : loaded raid0 from /modules/modules.cgz
17:10:38 INFO : loaded raid1 from /modules/modules.cgz
17:10:38 INFO : loaded xor from /modules/modules.cgz
17:10:38 INFO : loaded raid5 from /modules/modules.cgz
17:10:38 INFO : loaded raid6 from /modules/modules.cgz
17:10:38 INFO : loaded msdos from /modules/modules.cgz
17:10:38 INFO : loaded jbd from /modules/modules.cgz
17:10:38 INFO : loaded ext3 from /modules/modules.cgz
17:10:38 INFO : loaded reiserfs from /modules/modules.cgz
17:10:38 INFO : loaded jfs from /modules/modules.cgz
17:10:38 INFO : loaded exportfs from /modules/modules.cgz
17:10:38 INFO : loaded xfs from /modules/modules.cgz
17:10:38 INFO : loaded dm-mod from /modules/modules.cgz
17:10:38 INFO : loaded dm-zero from /modules/modules.cgz
17:10:38 INFO : loaded dm-mirror from /modules/modules.cgz
17:10:38 INFO : loaded dm-snapshot from /modules/modules.cgz
17:10:38 DEBUG : module(s) md not found
17:10:38 INFO : inserted /tmp/raid0.ko
17:10:38 INFO : inserted /tmp/raid1.ko
17:10:38 INFO : inserted /tmp/xor.ko
17:10:38 INFO : inserted /tmp/raid5.ko
17:10:38 INFO : inserted /tmp/raid6.ko
17:10:38 INFO : inserted /tmp/msdos.ko
17:10:38 INFO : inserted /tmp/jbd.ko
17:10:39 INFO : inserted /tmp/ext3.ko
17:10:39 INFO : inserted /tmp/reiserfs.ko
17:10:39 INFO : inserted /tmp/jfs.ko
17:10:39 INFO : inserted /tmp/exportfs.ko
17:10:39 INFO : inserted /tmp/xfs.ko
17:10:39 INFO : inserted /tmp/dm-mod.ko
17:10:39 INFO : inserted /tmp/dm-zero.ko
17:10:39 INFO : inserted /tmp/dm-mirror.ko
17:10:39 INFO : inserted /tmp/dm-snapshot.ko
17:10:39 INFO : load module set done
17:10:39 INFO : looking for USB mouse...
17:10:39 INFO : Running anaconda script /usr/bin/anaconda
17:10:51 INFO : Display mode = g
17:10:51 INFO : Method = cdrom://hdb:/mnt/source
17:10:51 INFO : _Fedora is only installclass, using it
17:11:17 INFO : Started mini-wm
17:11:17 INFO : Starting graphical installation...
17:11:21 INFO : anaconda floppy device fd0
17:11:22 INFO : Detected 224M of memory
17:11:22 INFO : Swap attempt of 224M to 448M
17:11:22 WARNING : step partitionmethod does not exist
17:11:22 WARNING : step partitionmethodsetup does not exist
17:11:22 WARNING : step autopartition does not exist
17:11:22 WARNING : step readcomps does not exist
17:11:22 WARNING : step selectlangpackages does not exist
17:11:22 WARNING : step handleX11pkgs does not exist
17:11:22 WARNING : step handlemiscpkgs does not exist
17:11:22 WARNING : step fixupconditionals does not exist
17:11:25 INFO : moving (1) to step welcome
17:11:29 INFO : moving (1) to step betanag
17:11:33 INFO : moving (1) to step language
17:11:38 INFO : moving (1) to step keyboard
17:11:41 INFO : moving (1) to step findrootparts
17:11:41 DEBUG : starting dmraids
17:11:41 DEBUG : self.driveList(): ['hda']
17:11:41 DEBUG : DiskSet.skippedDisks: []
17:11:41 DEBUG : DiskSet.skippedDisks: []
17:11:41 DEBUG : starting all dmraids on drives ['hda']
17:11:41 DEBUG : scanning for dmraid on drives ['hda']
17:11:41 DEBUG : done starting dmraids. Drivelist:
17:11:41 DEBUG : hda
17:11:43 INFO : lv is VolGroup00/LogVol00, size of 77920
17:11:43 INFO : lv is VolGroup00/LogVol01, size of 448
17:11:43 DEBUG : isys.py:mount()- going to mount /dev/VolGroup00/LogVol00 on
/mnt/sysimage
17:11:43 DEBUG : isys.py:mount()- going to mount /tmp/hda1 on /mnt/sysimage
17:11:44 INFO : moving (1) to step partitionobjinit
17:11:45 DEBUG : self.driveList(): ['hda']
17:11:45 DEBUG : DiskSet.skippedDisks: []
17:11:45 DEBUG : DiskSet.skippedDisks: []
17:11:46 INFO : pv is /dev/hda2 in vg VolGroup00, size is 78426
17:11:46 INFO : vg VolGroup00, size is 78400, pesize is 32768
17:11:46 INFO : lv is VolGroup00/LogVol00, size of 77920
17:11:46 INFO : lv is VolGroup00/LogVol01, size of 448
17:11:46 INFO : moving (1) to step parttype
17:11:53 INFO : moving (1) to step autopartitionexecute
17:11:54 DEBUG : used space is 1248
17:11:54 DEBUG : actual space is 78368
17:11:54 DEBUG : used space is 64512
17:11:54 DEBUG : actual space is 78368
17:11:54 DEBUG : used space is 64736
17:11:54 DEBUG : actual space is 78368
17:11:54 DEBUG : used space is 78368
17:11:54 DEBUG : actual space is 78368
17:11:54 DEBUG : used space is 78368
17:11:54 DEBUG : actual space is 78368
17:11:54 DEBUG : used space is 78368
17:11:54 DEBUG : actual space is 78368
17:11:54 INFO : moving (1) to step partition
17:11:59 INFO : moving (1) to step partitiondone
17:11:59 INFO : moving (1) to step bootloadersetup
17:11:59 INFO : moving (1) to step bootloader
17:12:03 INFO : moving (1) to step networkdevicecheck
17:12:03 INFO : moving (1) to step network
17:12:15 INFO : moving (1) to step timezone
17:12:29 INFO : moving (1) to step accounts
17:12:41 INFO : moving (1) to step reposetup
17:12:46 INFO : primary sqlite cache needs updating, reading in metadata
17:13:08 INFO : Added 2205 new packages, deleted 0 old in 21.28 seconds
17:13:09 INFO : moving (1) to step basepkgsel
17:13:10 INFO : moving (1) to step tasksel
17:13:18 INFO : moving (1) to step group-selection
17:13:22 WARNING : /usr/lib/python2.4/site-packages/pirut/GroupSelector.py:318:
GtkWarning: gtk_tree_view_scroll_to_point: assertion `GTK_WIDGET_REALIZED (tree_view)'
failed
tree.scroll_to_point(0, 0)
17:14:37 INFO : moving (1) to step postselection
17:14:37 INFO : selected kernel package for kernel
17:14:37 DEBUG : selecting kernel-devel
17:14:37 DEBUG : no such package kernel-devel
17:15:00 DEBUG : ignoring libtermcap>bash in whiteout
17:15:01 DEBUG : ignoring initscripts>kernel in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:07 DEBUG : ignoring aspell>aspell-en in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:08 DEBUG : ignoring ghostscript-fonts>ghostscript in whiteout
17:16:08 DEBUG : ignoring mysql>perl-DBD-MySQL in whiteout
17:16:25 DEBUG : ignoring coreutils>pam in whiteout
17:16:33 DEBUG : ignoring dbus>dbus-glib in whiteout
17:16:33 DEBUG : ignoring dbus>dbus-glib in whiteout
17:16:37 DEBUG : ignoring gstreamer-tools>gstreamer in whiteout
17:16:37 DEBUG : ignoring openjade>docbook-dtds in whiteout
17:16:39 DEBUG : ignoring nautilus>nautilus-cd-burner in whiteout
17:16:51 DEBUG : ignoring ghostscript>gimp-print in whiteout
17:17:00 DEBUG : ignoring ypbind>yp-tools in whiteout
17:17:01 DEBUG : ignoring php>php-pear in whiteout
17:17:06 DEBUG : ignoring gnome-python2>gnome-python2-bonobo in whiteout
17:17:15 DEBUG : ignoring gtk+>gdk-pixbuf in whiteout
17:17:15 DEBUG : ignoring gtk+>gdk-pixbuf in whiteout
17:17:21 INFO : moving (1) to step confirminstall
17:18:36 INFO : moving (1) to step install
17:18:36 INFO : moving (1) to step enablefilesystems
17:18:40 INFO : lv is VolGroup00/LogVol00, size of 77920
17:18:40 INFO : lv is VolGroup00/LogVol01, size of 448
17:18:40 INFO : removing lv LogVol00
17:18:40 INFO : removing lv LogVol01
17:18:40 INFO : pv is /dev/hda2 in vg VolGroup00, size is 78426
17:18:41 INFO : lvm vgremove VolGroup00
17:18:41 INFO : lvm pvremove -ff /dev/hda2
17:18:41 INFO : lvm pvcreate -ff -y -v /dev/hda2
17:18:42 INFO : formatting swap as swap
17:18:43 INFO : formatting None as volume group (LVM)
17:18:43 INFO : formatting None as physical volume (LVM)
17:18:43 INFO : formatting / as ext3
17:18:43 INFO : Format command: ['/usr/sbin/mke2fs',
'/dev/VolGroup00/LogVol00', '-i', '4096', '-j']
17:20:32 INFO : formatting /boot as ext3
17:20:33 INFO : Format command: ['/usr/sbin/mke2fs', '/tmp/hda1',
'-i', '4096', '-j']
17:20:38 DEBUG : error reading swap label on /dev/VolGroup00: [Errno 21] Is a directory
17:20:38 DEBUG : error reading xfs label on /dev/VolGroup00: [Errno 21] Is a directory
17:20:38 DEBUG : error reading jfs label on /dev/VolGroup00: [Errno 21] Is a directory
17:20:38 DEBUG : error reading reiserfs label on /dev/VolGroup00: [Errno 21] Is a
directory
17:20:40 INFO : trying to mount VolGroup00/LogVol00 on /
17:20:40 DEBUG : isys.py:mount()- going to mount /dev/VolGroup00/LogVol00 on
/mnt/sysimage
17:20:40 INFO : trying to mount hda1 on /boot
17:20:40 DEBUG : isys.py:mount()- going to mount /tmp/hda1 on /mnt/sysimage/boot
17:20:40 INFO : trying to mount proc on /proc
17:20:40 DEBUG : isys.py:mount()- going to mount proc on /mnt/sysimage/proc
17:20:40 INFO : trying to mount sys on /sys
17:20:40 DEBUG : isys.py:mount()- going to mount sys on /mnt/sysimage/sys
17:20:40 INFO : moving (1) to step migratefilesystems
17:20:40 INFO : moving (1) to step setuptime
17:20:41 INFO : moving (1) to step preinstallconfig
17:20:49 DEBUG : isys.py:mount()- going to mount /selinux on /mnt/sysimage/selinux
17:20:49 WARNING : no dev package, going to bind mount /dev
17:20:49 DEBUG : isys.py:mount()- going to mount /dev on /mnt/sysimage/dev
17:20:49 INFO : moving (1) to step installpackages
17:20:49 INFO : Preparing to install packages
17:20:49 INFO : switching from CD [1, 2, 3, 4, 5] to 1 for
17:20:50 DEBUG : isys.py:mount()- going to mount /tmp/hdb on /mnt/source
/tmp/lvmout:
Finding all logical volumes
group "VolGroup00" now active
cache
Finding all volume groups
Finding volume group "VolGroup00"
Reading all physical volumes. This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
p "VolGroup00" successfully created
directory "/etc/lvm/backup"
Creating volume group backup "/etc/lvm/backup/VolGroup00" (seqno 3).
Reading all physical volumes. This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
/mnt/sysimage/root/install.log: