Linux version 2.6.8-1.541 (bhcompile@porky.build.redhat.com) (gcc version 3.4.1 20040831 (Red Hat 3.4.1-10)) #1 Wed Sep 1 18:01:20 EDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. zapping low mappings. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 IntelR ) @ 0x000f69c0 ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000 ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040 ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Kernel command line: ro root=LABEL=/123 vga=792 rhgb quiet mapped 4G/4G trampoline to ffff4000. Initializing CPU#0 CPU 0 irqstacks, hard=023c6000 soft=023c5000 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 1523.170 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 255248k/262080k available (2024k kernel code, 6220k reserved, 631k data, 144k init, 0k highmem) Calibrating delay loop... 3006.46 BogoMIPS (lpj=1503232) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febf9ff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K CPU: After all inits, caps: 3febf1ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 0a Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. checking if image is initramfs... it is Freeing initrd memory: 569k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb0d0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040715 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) get_random_bytes called before random driver initialization PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 11 ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 11 (level, low) -> IRQ 11 get_random_bytes called before random driver initialization vesafb: framebuffer at 0xe0000000, mapped to 0x12880000, size 4608k vesafb: mode is 1024x768x24, linelength=3072, pages=27 vesafb: protected mode interface info at c000:481e vesafb: scrolling: redraw vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 fb0: VESA VGA frame buffer device apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1095377208.352:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key EB180CB126A51024 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states) ACPI: Thermal Zone [THRM] (62 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Console: switching to colour frame buffer device 128x48 Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i850 Chipset. agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 64M @ 0xe8000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 4 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: IC35L040AVER07-0, ATA DISK drive hdb: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: WDC WD1000BB-00CAA0, ATA DISK drive hdd: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 < hda5 > hdc: max request size: 128KiB hdc: 195371568 sectors (100030 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33) hdc: cache flushes not supported hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 hdc12 > hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide hdb: No disk in drive hdb: 0kB, 0/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 4681) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: SLPB PCI0 HUB0 USB0 USB1 Freeing unused kernel memory: 144k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks inserting floppy driver for 2.6.8-1.541 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11 divert: allocating divert_blk for eth0 eth0: RealTek RTL8139 at 0xa000, 00:40:f4:14:f9:61, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139C' ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49359 usecs intel8x0: clocking to 48000 i8xx TCO timer: initialized (0x4060). heartbeat=30 sec (nowayout=0) hw_random: RNG not detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1f.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 11, io base 0000b000 uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1f.4: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: irq 11, io base 0000b400 uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 2-2: new full speed USB device using address 2 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver NET: Registered protocol family 10 Disabled Privacy Extensions on device 02359760(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 mtrr: 0xe0000000,0x4000000 overlaps existing 0xe0000000,0x400000 [drm] Initialized radeon 1.11.0 20020828 on minor 0: mtrr: 0xe0000000,0x4000000 overlaps existing 0xe0000000,0x400000 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] EXT3 FS on hdc12, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 hdb: No disk in drive cdrom: open failed. Adding 506036k swap on /dev/hdc2. Priority:-1 extents:1