62EC5D9B6F7A87 - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie03] ACPI: Fan [FAN] (on) ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI: Thermal Zone [THRM] (40 C) isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A khelper used greatest stack depth: 2596 bytes left 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 11:883:934 Freeing unused kernel memory: 564k freed Write protecting the kernel read-only data: 844k modprobe used greatest stack depth: 2560 bytes left loader used greatest stack depth: 2476 bytes left loader used greatest stack depth: 2296 bytes left loop: module loaded Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 BIOS EDD facility v0.16 2004-Jun-25, 6 devices found input: PC Speaker as /class/input/input2 squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher NET: Registered protocol family 10 lo: Disabled Privacy Extensions SCSI subsystem initialized Loading iSCSI transport class v2.0-724. iscsi: registered transport (tcp) ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0b.2[C] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:0b.2 to 64 ehci_hcd 0000:00:0b.2: EHCI Host Controller ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.2: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:0b.2 ehci_hcd 0000:00:0b.2: irq 16, io mem 0xd4001000 ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected loader used greatest stack depth: 1876 bytes left ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 17, io mem 0xd4004000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCG] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ohci_hcd 0000:00:0b.1: OHCI Host Controller ohci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:0b.1: irq 18, io mem 0xd4000000 usb 1-2: new high speed USB device using ehci_hcd and address 3 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 5 ports detected usb 1-2: device descriptor read/64, error -71 usb 1-2: config 128 has an invalid descriptor of length 80, skipping remainder of the config usb 1-2: config 128 has 0 interfaces, different from the descriptor's value: 1 usb 1-2: configuration #128 chosen from 1 choice usb 2-1: new low speed USB device using ohci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 3-2: new low speed USB device using ohci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice input: Microsoft Microsoft Wheel Mouse OpticalŪ as /class/input/input3 input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse OpticalŪ] on usb-0000:00:0b.1-2 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:02:08.0, OHCI version 1.10 firewire_core: created new fw device fw0 (0 config rom retries, S400) Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 20 e1000: 0000:02:0c.0: e1000_probe: (PCI:33MHz:32-bit) 00:13:d4:78:81:ee e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection libata version 2.21 loaded. sata_nv 0000:00:10.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 21 sata_nv 0000:00:10.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:10.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xf8966480 ctl 0xf89664a0 bmdma 0x0001c800 irq 21 ata2: SATA max UDMA/133 cmd 0xf8966580 ctl 0xf89665a0 bmdma 0x0001c808 irq 21 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16 sata_nv 0000:00:11.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:11.0 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0xf8972480 ctl 0xf89724a0 bmdma 0x0001dc00 irq 16 ata4: SATA max UDMA/133 cmd 0xf8972580 ctl 0xf89725a0 bmdma 0x0001dc08 irq 16 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATA-7: ST3200826AS, 3.03, max UDMA/133 ata4.00: 390721968 sectors, multi 1: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5 ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 sd 3:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 3:0:0:0: [sda] Attached SCSI disk loader used greatest stack depth: 936 bytes left pata_amd 0000:00:0f.0: version 0.3.9 PCI: Setting latency timer of device 0000:00:0f.0 to 64 scsi4 : pata_amd scsi5 : pata_amd ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 ata5.00: ATA-6: WDC WD3200JB-00KFA0, 08.05J08, max UDMA/100 ata5.00: 625142448 sectors, multi 1: LBA48 ata5.00: configured for UDMA/100 ata6.00: ATAPI: TSSTcorpCD/DVDW TS-H552U, US06, max UDMA/33 ata6.00: configured for UDMA/33 scsi 4:0:0:0: Direct-Access ATA WDC WD3200JB-00K 08.0 PQ: 0 ANSI: 5 sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb:<3>ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata5.00: BMDMA stat 0x64 ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata5: soft resetting port ata5.00: configured for UDMA/100 ata5: EH complete ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata5.00: BMDMA stat 0x64 ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata5: soft resetting port ata5.00: configured for UDMA/100 ata5: EH complete ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata5.00: BMDMA stat 0x64 ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata5: soft resetting port ata5.00: configured for UDMA/100 ata5: EH complete ata5.00: limiting speed to UDMA/66:PIO4 ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata5.00: BMDMA stat 0x64 ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata5: soft resetting port ata5.00: configured for UDMA/66 ata5: EH complete ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata5.00: BMDMA stat 0x64 ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata5: soft resetting port ata5.00: configured for UDMA/66 ata5: EH complete ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata5.00: BMDMA stat 0x64 ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata5: soft resetting port ata5.00: configured for UDMA/66 sd 4:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 4:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 07 sd 4:0:0:0: [sdb] Add. Sense: Scsi parity error end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 ata5: EH complete ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata5.00: BMDMA stat 0x64 ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata5: soft resetting port ata5.00: configured for UDMA/66 ata5: EH complete ata5.00: limiting speed to UDMA/33:PIO4 ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata5.00: BMDMA stat 0x64 ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata5: soft resetting port ata5.00: configured for UDMA/33 ata5: EH complete Dev sdb: unable to read RDB block 0 unable to read partition table sd 4:0:0:0: [sdb] Attached SCSI disk scsi 5:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552U US06 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 32x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 5:0:0:0: Attached scsi CD-ROM sr0 loader used greatest stack depth: 788 bytes left ISO 9660 Extensions: Microsoft Joliet Level 3 Unable to load NLS charset utf8 Unable to load NLS charset utf8 ISO 9660 Extensions: RRIP_1991A ISOFS: Unable to identify CD-ROM format. VFS: Can't find an ext2 filesystem on dev loop0. security: 5 users, 11 roles, 2284 types, 107 bools, 1 sens, 1024 cats security: 67 classes, 227389 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev loop0, type squashfs), not configured for labeling SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1193226994.615:2): policy loaded auid=4294967295 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 async_tx: api initialized (async) xor: automatically using best checksumming function: pIII_sse pIII_sse : 4540.000 MB/sec xor: using function: pIII_sse (4540.000 MB/sec) raid6: int32x1 761 MB/s raid6: int32x2 683 MB/s raid6: int32x4 855 MB/s raid6: int32x8 808 MB/s raid6: mmxx1 1816 MB/s raid6: mmxx2 2058 MB/s raid6: sse1x1 1058 MB/s raid6: sse1x2 1945 MB/s raid6: sse2x1 2164 MB/s raid6: sse2x2 3144 MB/s raid6: using algorithm sse2x2 (3144 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 GFS2 (built Sep 28 2007 17:17:24) installed Lock_Nolock (built Sep 28 2007 17:17:33) installed JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded device-mapper: multipath emc: version 0.0.3 loaded usbcore: registered new interface driver appletouch audit(1193226999.002:3): audit_pid=809 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0 e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX eth0: no IPv6 routers present