Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb 3) Linux version 2.6.17-1.2416.fc6 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.1 20060711 (Red Hat 4.1.1-8)) #1 SMP Tue Jul 18 17:25:28 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bf70000 (usable) BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data) BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS) BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f68d0 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000003bf75fea ACPI: FADT (v001 AMDK8 PTLTW 0x06040000 PTL_ 0x000f4240) @ 0x000000003bf79e66 ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000003bf79eda ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000003bf79fb0 ACPI: DSDT (v001 VIA PTL_ACPI 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000003bf70000 NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000003bf70000 On node 0 totalpages: 238028 DMA zone: 1696 pages, LIFO batch:0 DMA32 zone: 236332 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ10 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000) SMP: Allowing 1 CPUs, 0 hotplug CPUs Built 1 zonelists. Total pages: 238028 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb 3 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2004.613 MHz processor. Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 8192 ... CHAINHASH_SIZE: 4096 memory used by lock dependency info: 1120 kB per task-struct memory footprint: 1680 bytes Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ e0000000 size 256 MB Memory: 946880k/982464k available (2472k kernel code, 35196k reserved, 2043k data, 208k init) Calibrating delay using timer specific routine.. 4014.51 BogoMIPS (lpj=8029026) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 SMP alternatives: switching to UP code Freeing SMP alternatives: 28k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12528848 Detected 12.528 MHz APIC timer. Brought up 1 CPUs testing NMI watchdog ... OK. sizeof(vma)=176 bytes sizeof(page)=88 bytes sizeof(inode)=1008 bytes sizeof(dentry)=256 bytes sizeof(ext3inode)=1376 bytes sizeof(buffer_head)=96 bytes sizeof(skbuff)=240 bytes checking if image is initramfs... it is Freeing initrd memory: 2032k freed PM: Adding info for No Bus:platform NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing PM: Adding info for acpi:acpi ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PM: Adding info for No Bus:pci0000:00 PCI quirk: region 4000-407f claimed by vt8235 PM PCI quirk: region 8100-810f claimed by vt8235 SMB Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:00.1 PM: Adding info for pci:0000:00:00.2 PM: Adding info for pci:0000:00:00.3 PM: Adding info for pci:0000:00:00.4 PM: Adding info for pci:0000:00:00.7 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:05.0 PM: Adding info for pci:0000:00:08.0 PM: Adding info for pci:0000:00:0c.0 PM: Adding info for pci:0000:00:0e.0 PM: Adding info for pci:0000:00:0e.1 PM: Adding info for pci:0000:00:10.0 PM: Adding info for pci:0000:00:10.1 PM: Adding info for pci:0000:00:10.2 PM: Adding info for pci:0000:00:10.3 PM: Adding info for pci:0000:00:11.0 PM: Adding info for pci:0000:00:11.1 PM: Adding info for pci:0000:00:11.5 PM: Adding info for pci:0000:00:11.6 PM: Adding info for pci:0000:00:18.0 PM: Adding info for pci:0000:00:18.1 PM: Adding info for pci:0000:00:18.2 PM: Adding info for pci:0000:00:18.3 PM: Adding info for pci:0000:01:00.0 ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: Embedded Controller [EC] (gpe 11) interrupt mode. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init PM: Adding info for No Bus:pnp0 PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 PM: Adding info for pnp:00:05 PM: Adding info for pnp:00:06 PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 PM: Adding info for pnp:00:0a pnp: PnP ACPI: found 11 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 256M @ 0xe0000000 PCI-DMA: Disabling IOMMU. pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:06: ioport range 0xfe10-0xfe11 could not be reserved pnp: 00:06: ioport range 0xfe00-0xfe00 has been reserved pnp: 00:06: ioport range 0x4000-0x407f could not be reserved pnp: 00:06: ioport range 0x8100-0x811f could not be reserved PCI: Failed to allocate mem resource #6:10000@f4000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: d1000000-d1ffffff PREFETCH window: f0000000-f3ffffff PCI: Bus 2, cardbus bridge: 0000:00:0c.0 IO window: 00002000-000020ff IO window: 00002400-000024ff PREFETCH window: 50000000-51ffffff MEM window: 52000000-53ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Enabling device 0000:00:0c.0 (0000 -> 0003) GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:0c.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 65536 (order: 9, 3670016 bytes) TCP bind hash table entries: 32768 (order: 8, 1835008 bytes) TCP: Hash tables configured (established 65536 bind 32768) TCP reno registered PM: Adding info for platform:pcspkr audit: initializing netlink socket (disabled) audit(1153394587.692:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 PM: Adding info for platform:vesafb.0 ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active threshold [0] [20060707] ACPI: Thermal Zone [THRM] (53 C) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled PM: Adding info for platform:serial8250 serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> IRQ 177 PCI: VIA IRQ fixup for 0000:00:11.1, from 0 to 1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HTS541080G9AT00, ATA DISK drive PM: Adding info for No Bus:ide0 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 PM: Adding info for ide:0.0 Probing IDE interface ide1... hdc: SONY DVD RW DW-D56A, ATAPI CD/DVD-ROM drive PM: Adding info for No Bus:ide1 ide1 at 0x170-0x177,0x376 on irq 15 PM: Adding info for ide:1.0 hda: max request size: 512KiB hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 ide-floppy driver 0.99.newide Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44 Yenta: ISA IRQ mask 0x0a40, PCI irq 169 Socket status: 30000006 usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 PM: Adding info for platform:i8042 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 PM: Adding info for serio:serio0 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 PM: Adding info for serio:serio1 powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ processors (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 PM: Adding info for serio:serio2 PM: Adding info for serio:serio3 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 208k freed Write protecting the kernel read-only data: 469k PM: Adding info for serio:serio4 input: AT Translated Set 2 keyboard as /class/input/input0 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com input: PS/2 Mouse as /class/input/input1 input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 6 roles, 1467 types, 157 bools, 1 sens, 256 cats security: 58 classes, 43317 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1153394593.292:2): policy loaded auid=4294967295 audit(1153394593.292:3): avc: granted { load_policy } for pid=1 comm="init" scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=security SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq ipw2200: Copyright(c) 2003-2006 Intel Corporation PCI: Enabling device 0000:00:05.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:05.0 to 64 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection input: PC Speaker as /class/input/input3 hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 8139too Fast Ethernet driver 0.9.27 NET: Registered protocol family 23 USB Universal Host Controller Interface driver v3.0 ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2 ipw2200: Unable to load firmware: -2 ipw2200: failed to register network device ACPI: PCI interrupt for device 0000:00:05.0 disabled ipw2200: probe of 0000:00:05.0 failed with error -5 ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 185 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.3: irq 185, io mem 0xd0004400 ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PM: Adding info for usb:usb1 PM: Adding info for No Bus:usbdev1.1_ep00 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected PM: Adding info for No Bus:usbdev1.1_ep81 PM: Adding info for No Bus:usbdev1.1 GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 193 eth0: RealTek RTL8139 at 0xffffc20000020000, 00:90:f5:3e:41:f0, IRQ 193 eth0: Identified 8139 chip type 'RTL-8100B/8139D' ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:11.5 to 64 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) PM: Adding info for ac97:0-0:ALC202 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 185 PCI: VIA IRQ fixup for 0000:00:10.0, from 0 to 9 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 185, io base 0x00001c00 PM: Adding info for usb:usb2 PM: Adding info for No Bus:usbdev2.1_ep00 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev2.1_ep81 PM: Adding info for No Bus:usbdev2.1 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 185 PCI: VIA IRQ fixup for 0000:00:10.1, from 0 to 9 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 185, io base 0x00001c20 PM: Adding info for usb:usb3 PM: Adding info for No Bus:usbdev3.1_ep00 usb usb3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev3.1_ep81 PM: Adding info for No Bus:usbdev3.1 ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 185 PCI: VIA IRQ fixup for 0000:00:10.2, from 0 to 9 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 185, io base 0x00001c40 PM: Adding info for usb:usb4 PM: Adding info for No Bus:usbdev4.1_ep00 usb usb4: configuration #1 chosen from 1 choice PM: Adding info for usb:4-0:1.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev4.1_ep81 PM: Adding info for No Bus:usbdev4.1 PM: Adding info for No Bus:i2c-0 ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:11.6 to 64 usb 2-2: new low speed USB device using uhci_hcd and address 2 PM: Adding info for usb:2-2 PM: Adding info for No Bus:usbdev2.2_ep00 usb 2-2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-2:1.0 input: Dell Dell USB Mouse as /class/input/input4 input: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:10.0-2 PM: Adding info for No Bus:usbdev2.2_ep81 PM: Adding info for No Bus:usbdev2.2 PM: Adding info for ac97:1-1:Si3036,8 usb 4-1: new full speed USB device using uhci_hcd and address 2 PM: Adding info for usb:4-1 PM: Adding info for No Bus:usbdev4.2_ep00 usb 4-1: configuration #1 chosen from 1 choice PM: Adding info for usb:4-1:1.0 PM: Adding info for No Bus:usbdev4.2_ep81 PM: Adding info for No Bus:usbdev4.2_ep82 PM: Adding info for No Bus:usbdev4.2 Linux video capture interface: v2.00 zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.05 usb 4-1: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8/0x301B) usb 4-1: No supported image sensor detected usbcore: registered new driver zc0301 floppy0: no floppy controllers found parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWB] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ibm_acpi: ec object not found ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda2, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 1933304k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:1933304k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ======================================================= [ INFO: possible circular locking dependency detected ] ------------------------------------------------------- cpuspeed/1506 is trying to acquire lock: (&policy->lock){--..}, at: [] mutex_lock+0x2a/0x2e but task is already holding lock: (cpucontrol){--..}, at: [] mutex_lock+0x2a/0x2e which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (cpucontrol){--..}: [] lock_acquire+0x4a/0x69 [] __mutex_lock_slowpath+0xe4/0x261 [] mutex_lock+0x29/0x2e [] __lock_cpu_hotplug+0x3c/0x5f [] lock_cpu_hotplug+0xa/0xd [] __cpufreq_driver_target+0x1a/0x82 [] cpufreq_governor_userspace+0x1e9/0x22c [] __cpufreq_governor+0x74/0x107 [] __cpufreq_set_policy+0x1d5/0x1e7 [] cpufreq_set_policy+0x3b/0x96 [] cpufreq_add_dev+0x3ac/0x57b [] sysdev_driver_register+0x7b/0xdc [] cpufreq_register_driver+0xc1/0x1a1 [] powernowk8_init+0x7e/0x88 [] init+0x1fc/0x3cd [] child_rip+0x7/0x12 -> #1 (userspace_mutex){--..}: [] lock_acquire+0x4a/0x69 [] __mutex_lock_slowpath+0xe4/0x261 [] mutex_lock+0x29/0x2e [] cpufreq_governor_userspace+0x65/0x22c [] __cpufreq_governor+0x74/0x107 [] __cpufreq_set_policy+0x174/0x1e7 [] cpufreq_set_policy+0x3b/0x96 [] cpufreq_add_dev+0x3ac/0x57b [] sysdev_driver_register+0x7b/0xdc [] cpufreq_register_driver+0xc1/0x1a1 [] powernowk8_init+0x7e/0x88 [] init+0x1fc/0x3cd [] child_rip+0x7/0x12 -> #0 (&policy->lock){--..}: [] lock_acquire+0x4a/0x69 [] __mutex_lock_slowpath+0xe4/0x261 [] mutex_lock+0x29/0x2e [] store_scaling_governor+0x14e/0x19c [] store+0x4b/0x66 [] sysfs_write_file+0xd0/0x103 [] vfs_write+0xce/0x175 [] sys_write+0x46/0x70 [] system_call+0x7d/0x83 other info that might help us debug this: 1 lock held by cpuspeed/1506: #0: (cpucontrol){--..}, at: [] mutex_lock+0x2a/0x2e stack backtrace: Call Trace: [] show_trace+0xaa/0x23d [] dump_stack+0x15/0x17 [] print_circular_bug_tail+0x6c/0x77 [] __lock_acquire+0x853/0xa54 [] lock_acquire+0x4b/0x69 [] __mutex_lock_slowpath+0xe5/0x261 [] mutex_lock+0x2a/0x2e [] store_scaling_governor+0x14f/0x19c [] store+0x4c/0x66 [] sysfs_write_file+0xd1/0x103 [] vfs_write+0xcf/0x175 [] sys_write+0x47/0x70 [] system_call+0x7e/0x83 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (3837 buckets, 30696 max) - 304 bytes per conntrack ip_tables: (C) 2000-2006 Netfilter Core Team eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 audit(1153391026.069:4): audit_pid=1839 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 eth0: no IPv6 routers present SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.10 PM: Adding info for platform:bluetooth NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 i2c /dev entries driver PM: Adding info for i2c:0-0050 PM: Adding info for i2c:0-0051 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active threshold [0] [20060707] ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active threshold [0] [20060707]