2009/2/1 Antonio M <antonio.montagnani(a)gmail.com>:
2009/1/30 "Jóhann B. Guðmundsson" <johannbg(a)hi.is>:
> Antonio M wrote:
>>
>> 2009/1/30 "Jóhann B. Guðmundsson" <johannbg(a)hi.is>:
>>
>>>
>>> Antonio M wrote:
>>>
>>>>
>>>> If I connect a NTFS USB disk to my rawhide it is not mounted (saying
>>>> that filesystem is not recognized) while same disk conencted to F10 is
>>>> fine.
>>>>
>>>> What is the component to file a bug against??
>>>>
>>>>
>>>>
>>>
>>> First I would start checking if the necessary packages are installed.
>>> You can do so by running rpm -qa | grep ntfs )
>>> (There should be some ntfs-3g-* ntfsprogs-* packages )
>>>
>>> Secondly you need start being less vague and a bit more specific in your
>>> reporting to this list.
>>>
>>> Tell ust more on how your are doing things as in which commands or which
>>> application your using
>>> when things are not working as they are supposed to.
>>>
>>> What application log or a run command gave the error msg "filesystem is
>>> not
>>> recognized" and is that the exact error msg?
>>>
>>> JBG
>>>
>>> --
>>> fedora-test-list mailing list
>>> fedora-test-list(a)redhat.com
>>> To unsubscribe:
>>>
https://www.redhat.com/mailman/listinfo/fedora-test-list
>>>
>>>
>>
>> I connect my USB cable to my box and get a window stating:
>>
>
> Still to vague which DE are you using Gnome? KDE? XFCE? LXDE?
>>
>> Impossible to mount volume
>> Impossible to mount "Philips_External_Hard_Disk"
>> alternati filesystem not available..
>>
>>
>
> What happens when you try to mount the ntfs usb drive from the command line
> ( mount -t ntfs-3g /dev/sd* /media/[folder] *)*
>
> Does that work?
>
>> Then I get a message:
>>
>> DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a
>> reply. Possible causes include: the remote application did not send a
>> reply, the message bus security policy blocked the reply, the reply
>> timeout expired, or the network connection was broken.
>>
>> rpm -qa | grep ntfs
>> ntfs-3g-1.5222-0.2.RC.fc11.i386
>> ntfsprogs-2.0.0-9.fc10.i386
>>
>>
>
> Install all available package encase they have split it and try again
> ( yum -y install ntfs-3g-* ntfsprogs-* )
>>
>> I cannot supply any further info, I still think that something is
>> broken (another cyclic bug)
>>
>
> Not unlikely this is rawhide after all..
>
> JBG
>
> --
> fedora-test-list mailing list
> fedora-test-list(a)redhat.com
> To unsubscribe:
>
https://www.redhat.com/mailman/listinfo/fedora-test-list
>
yes, but what is the component to be filed against?? (not ntfs-3g, as
I reverted to a previous release and no improvement)
--
Antonio Montagnani
Skype : antoniomontag
and I rebooted the machine and I gave alook to fstab & mtab with no
external device attached:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options>
<dump> <pass>
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/dm-0 / ext3 defaults 1 1
/dev/sda1 /boot ext3 defaults 1 2
/dev/sdb1 /media/Philips_External_Hard_Disk ntfs-3g defaults,locale=it_IT.UTF-8 0 0
/dev/dm-1 swap swap defaults 0 0
mtab
/dev/dm-0 / ext3 rw 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs rw 0 0
/dev/sda1 /boot ext3 rw 0 0
none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0
sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw 0 0
nfsd /proc/fs/nfsd nfsd rw 0 0
gvfs-fuse-daemon /home/antonio/.gvfs fuse.gvfs-fuse-daemon
rw,nosuid,nodev,user=antonio 0 0
now when I insert an USB stick I can't mount it and my system says
that it not possible to mount it as only root can mount /dev/sdb1 on
/media/Philips_External_Hard_Disk (taht is not connected)
An additional USB is mounted as sdc1
/dev/dm-0 / ext3 rw 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs rw 0 0
/dev/sda1 /boot ext3 rw 0 0
none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0
sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw 0 0
nfsd /proc/fs/nfsd nfsd rw 0 0
gvfs-fuse-daemon /home/antonio/.gvfs fuse.gvfs-fuse-daemon
rw,nosuid,nodev,user=antonio 0 0
/dev/sdc1 /media/disk vfat
rw,nosuid,nodev,uhelper=hal,shortname=lower,uid=500 0 0
Is gvfs-fuse the component to be filed against???
--
Antonio Montagnani
Skype : antoniomontag