Re: Interactive white boards and Fedora Xorg setup
by Rodd Clarkson
On Wed, 2010-07-07 at 11:01 +1000, Peter Hutterer wrote:
> [faked-up reply, I'm not on the list, ajax pointed it out to me on the
> archives. please make sure you CC me for any replies]
Thanks for the reply, and it's nice to know that ajax noticed this (as
it appears ajax has much to do with Xorg on fedora (and I'm guessing
elsewhere)).
> > Unlike a mouse, these pointer devices move the mouse pointer to where
> > you touch the screen. For example, if the IWB is to the right of my
> > laptop screen and I touch the right edge of the screen then the mouse
> > pointer appears on the right side of my laptop screen, and not where
> > I've touched the screen.
> >
> > The pointer device included with the IWB needs to be able to be
> > configured to do two things:
>
> > 1. Only work as a device for the IWB screen. The mouse shouldn't be
> > able to be moved off the screen, only around it.
> > 2. Calibrate the pointer so that you can declare the
> > top/bottom/left/right of the screen (as where the image falls on the
> > pointer device isn't usually at the extremes of the device.)
> >
> > Is this possible?
>
> The 1.9 X server that's already in rawhide has an coordinate transformation
> matrix to restrict absolute devices to essentially any rectangle on the
> screen. The matrix is a property on each device and can be modified with the
> xinput commandline tool (no GUI tools yet).
>
> For example, I've got a 1440x900 and a 1920x1200 display. To restrict my
> tablet to the right (larger) screen:
> $> xinput --set-prop "Wacom Intuos4 6x9" "Coordinate Transformation Matrix"
> 0.58 0 0.42 0 1 0 0 0 1
>
> The matrix thus looks like this:
> | 0.58 0 0.42 |
> | 0 1 0 |
> | 0 0 1 |
>
> giving us a scale into 58% of the screen range with an offset of 42%. Your
> numbers will likely vary but that should fix the issue for you.
This looks like a great start, but I'm guessing it only works in 1.9 at
this stage. Will this also work in 1.8?
Obviously a nice GUI tool for this where you can specify the pointer and
the region visually would be the finishing touches (as this will vary
for me from IWB to IWB and I'm a Relief Teacher that sees a lot of
different IWBs.) Presumably this would be easy enough to implement in
the Monitor Preferences (System > Preferences > Monitor) by including
options to limit pointer devices to a particular display.
The other bit of the problem is defining the mouse region for the
pointer device. Unlike your wacom device (and similar devices) where
the top left point of the device is quite easier to assume as the top
left corner of the display, IWBs aren't so simple.
IWBs have the image projected onto the screen which is also the pointer
device, but it's very unlikely that the top left corner of the projected
image is also at the same place as the top left corner of the screen.
Since the mouse pointer moves to where you place you finger on the
screen, it's important that this maps precisely so you can click buttons
and drag items without a level of hit and miss (and incorrectly buttons
pressed). I've even seen IWBs where the image isn't even square on the
IWB, and I guess this needs to be addressed too.
Any suggestions for this?
Rodd
13 years, 9 months
Re: Bodhi 0.7.5 release
by Michel Alexandre Salim
On Sun, Jul 4, 2010 at 1:27 PM, Till Maas <opensource(a)till.name> wrote:
> On Sun, Jul 04, 2010 at 12:34:59PM +0200, Michel Alexandre Salim wrote:
>> On Sun, Jul 4, 2010 at 10:34 AM, Till Maas <opensource(a)till.name> wrote:
>> > On Sun, Jul 04, 2010 at 01:32:16AM +0200, Michel Alexandre Salim wrote:
>> >
>> >> Could a flag be added to only output the package names, so that I can
>> >> pipe the output directly to yum? Or even better, have that flag
>> >> automatically cause the bodhi client to invoke yum with
>> >> --enable-repo=updates-testing with the packages required.
>> >
>> > You can just install all critpath updates using:
>> >
>> > yum groupinstall --enable-repo=\*-testing critical-path\* core
>> >
>> > and then use f-e-k from git with --critpath-only to get only asked for
>> > the unapproved ones.
>> Ah! Would be great if this is listed on the QA page.
>
> If you know on which page it fits, just add it. I did not find a
> matching page when I swept through the QA pages.
>
I don't -- Adam Williamson probably knows better. Adam?
--
Michel
13 years, 9 months
Fedora 12 updates-testing report
by updates@fedoraproject.org
The following builds have been pushed to Fedora 12 updates-testing
OpenSceneGraph-2.8.2-4.fc12
R-GeneR-2.18.1-1.fc12
audacity-1.3.12-0.4.beta.fc12
bigloo-3.3a-2.5.fc12
bitlbee-1.2.8-1.fc12
cnucnu-0-0.4.20100704git0fe054e7.fc12
cryptsetup-luks-1.1.3-1.fc12
e2fsprogs-1.41.9-8.fc12
eject-2.1.5-18.fc12
eric-4.4.6-1.fc12
garmindev-0.3.4-1.fc12
git-1.7.1.1-1.fc12
gnome-applet-alarm-clock-0.3.1-1.fc12
ibus-1.3.6-1.fc12
kcbench-0.3-6.fc12
libHX-3.4-1.fc12
libfishsound-1.0.0-2.fc12
libisofs-0.6.34-1.fc12
liblinebreak-2.0-1.fc12
libpng10-1.0.54-1.fc12
lshell-0.9.12-2.fc12
lxpolkit-0.1.0-0.1.20100402git5087383.fc12
lxterminal-0.1.7-2.fc12
maildrop-2.5.0-13.fc12
mercurial-1.6-3.fc12
mingw32-libpng-1.2.44-1.fc12
monit-5.1.1-1.fc12
mpop-1.0.21-1.fc12
octave-forge-20090607-17.fc12
openoffice.org-3.1.1-19.34.fc12
pam_mount-2.4-2.fc12
pcsc-lite-1.5.2-5.fc12
perl-Devel-PartialDump-0.13-1.fc12
php-eaccelerator-0.9.6.1-1.fc12
publican-2.0-0.fc12
python-cjson-1.0.5-5.fc12
python-ferari-0.2.0-1.fc12
python-fiat-0.9.2-1.fc12
python-instant-0.9.8-1.fc12
python-markdown2-1.0.1.17-1.fc12
python-textile-2.1.4-3.fc12
qcad-2.0.5.0-12.fc12
qlandkartegt-0.18.3-1.fc12
qlandkartegt-0.18.3-2.fc12
qlandkartegt-0.18.4-1.fc12
sslogger-0.96-2.fc12
vifir-0.6-1.fc12
wine-1.2.0-0.6.rc6.fc12
xautomation-1.03-3.fc12
xbacklight-1.1.1-1.fc12
xtide-2.11-0.8.RC1.fc12
zfs-fuse-0.6.9-5.fc12
Details about builds:
================================================================================
OpenSceneGraph-2.8.2-4.fc12 (FEDORA-2010-10836)
High performance real-time graphics toolkit
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Ralf Corsépius <corsepiu(a)fedoraproject.org> - 2.8.2-4
- Add osg-examples-gtk.
- Spec overhaul.
--------------------------------------------------------------------------------
================================================================================
R-GeneR-2.18.1-1.fc12 (FEDORA-2010-10752)
R for genes and sequences analysis
--------------------------------------------------------------------------------
Update Information:
New release
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 pingou <pingou(a)pingoured.fr> 2.18.1-1
- Update to version 2.18.1
- Remove link to BioC
- Remove R post and R postun
- Remove patch from Milos (Thanks to him)
--------------------------------------------------------------------------------
================================================================================
audacity-1.3.12-0.4.beta.fc12 (FEDORA-2010-10829)
Multitrack audio editor
--------------------------------------------------------------------------------
Update Information:
Update to 1.3.12-beta, containing fixes: - Cutting or deleting a region in
the waveform and label track did not move the labels in advance of the cut -
Incorrect behavior snapping to labels and boundaries with Snap To enabled -
Projects froze if files imported via On-Demand were no longer available Also
contains changes as noted: http://audacity.sourceforge.net/
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jun 28 2010 David Timms <iinet.net.au@dtimms> - 1.3.12-0.4.beta
- mods to ease diffs between builds for fedora and full
* Mon Jun 28 2010 David Timms <iinet.net.au@dtimms> - 1.3.12-0.3.beta
- really package new icons found in icons/hicolor
* Mon Jun 28 2010 David Timms <iinet.net.au@dtimms> - 1.3.12-0.2.beta
- mod tartopdir to use package version macro
- upgrade to 1.3.12-beta
- package new icons found in icons/hicolor
--------------------------------------------------------------------------------
================================================================================
bigloo-3.3a-2.5.fc12 (FEDORA-2010-10784)
A compiler for the Scheme programming language
--------------------------------------------------------------------------------
Update Information:
Updated Emacs packaging to comply with our Emacs guidelines; disabled XEmacs
subpackages since they are broken at the moment
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Michel Salim <salimma(a)fedoraproject.org> - 3.3a-2.5
- Now complies with Emacs packaging guidelines
- Disable broken XEmacs subpackages
--------------------------------------------------------------------------------
================================================================================
bitlbee-1.2.8-1.fc12 (FEDORA-2010-10772)
IRC to other chat networks gateway
--------------------------------------------------------------------------------
Update Information:
- Now always using the AIM-style authentication method for OSCAR connections,
even when connecting to ICQ. This solves login issues some people were having.
(If you have problems, try changing the old_icq_auth setting.) - Twitter:
- Allow changing the Twitter API base URL so the module can also be used for
identi.ca or any other compatible network. - Fetch the full list of Twitter
contacts instead of slowly adding all contacts as they post a message. -
Fixed message length counting. - Allow following/unfollowing people using
the usual add/remove commands. - Better error reporting. - Added a
user_agent setting to the Jabber module to get around artificial client
restrictions. - Allow nick changes (although only before register/identify).
- Some more minor bugfixes/etc.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Robert Scheck <robert(a)fedoraproject.org> 1.2.8-1
- Upgrade to 1.2.8
--------------------------------------------------------------------------------
================================================================================
cnucnu-0-0.4.20100704git0fe054e7.fc12 (FEDORA-2010-10742)
Upstream release monitoring with bug reporting
--------------------------------------------------------------------------------
Update Information:
With this new snapshot, all aliases mentioned on
https://fedoraproject.org/wiki/Upstream_Release_Monitoring will work in the
shell mode.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Till Maas <opensource(a)till.name> - 0-0.4.20100704git0fe054e7
- Update to a recent snapshot to support the current regex/URL aliases in --shell
- Use fedpkg-vcs to easily update to a new snapshot
--------------------------------------------------------------------------------
================================================================================
cryptsetup-luks-1.1.3-1.fc12 (FEDORA-2010-8681)
A utility for setting up encrypted filesystems
--------------------------------------------------------------------------------
Update Information:
For pam_mount: Notes: - see doc/bugs.txt for cryptsetup behavior that impacts
pam_mount users since version 2.0 Fixes: - umount.crypt: fix use of a wrong
field for smtab/cmtab staleness check - umount.crypt had erroneously mounted
instead of umounted - mount.crypt: fix memory scribble crash when crypto device
could not be initialized - mount.crypt: do not fail when unlocking key slot
other than #0 - fusermount is now called with supplementary groups initialized
- rdconf: do not warn about missing fskeyhash when no fskey specified - mount:
prefer sysv mount API over bsd - pmt-ehd: reword help text for -k option -
pmt-ehd: apply default value for -k option - pmt-ehd: fix fskey generation
which was pegged at 256 bits - pmt-ehd: avoid needless
overtruncation/sparsifying - pmt-ehd: zero LUKS header to avoid setup failure
of PLAIN volume Changes: - pmt-ehd: speed up writing random data - pmt-ehd:
reword help text for -k option - mount.crypt: ignore cmtab update errors -
mount.crypt: add support for keyfile passthru using -ofsk_cipher=none - doc:
document mount.crypt's -o hash option - mount.crypt: warn on ignored options
Fixes: - config: rdconf1 static data had unclosed %(if) tags - config: rdconf1
static data had extraneous %(OPTIONS) parameter Changes: - mount.crypt: make
use of libcryptsetup - cmtab is now stored below localstatedir (usually
/var/run) - use HXformat2. This invalidates old constructs like
%(before=\"-o\"...), which need to be replaced with the new syntax. (See
below.) In general, the old syntax was only used by commands Note to
updaters: As the old syntax %(after=...) %(before=...) %(ifempty=...)
%(ifnempty=...) %(lower=...) %(upper=...) only appeared in commands, and
commands are not part of the default config file anymore since v1.0~15^2~15,
there should be little worry. The configuration options in question are
<cifsmount>, <cryptmount>, <cryptumount>, <fd0ssh>, <fsck>, <fusemount>,
<fuseumount>, <lclmount>, <nfsmount>, <ncpmount>, <ncpumount>, <pmvarrun>,
<smbmount>, <smbumount> <umount> and should normally not be needed in
pam_mount.conf.xml. Changes: - cope better with cryptsetup's assumption that
keysize=256 - augment doc/bugs.txt about caveats with cryptsetup create
Fixes: - avoid a mlock(NULL) when there is no auth token Changes: - print
error code when mkmountpoint failed - print warning when cmtab is not creatable
Changes: - update for libHX 3.4 Fixes: - do decrease the login refcount on
logout when no volumes are defined Fixes: - avoid multi-free of auth token
when pam_mount is rerun in a PAM stack - avoid NULL dereference when there is
an empty line in mtab For cryptsetup: - Fix device alignment ioctl calls
parameters. - Fix activate_by_* API calls to handle NULL device name as
documented. - Fix luksFormat/luksOpen reading passphrase from stdin and "-"
keyfile. - Support --key-file/-d option for luksFormat. - Fix description of
--key-file and add --verbose and --debug options to man page. - Add verbose log
level and move unlocking message there. - Remove device even if underlying
device disappeared. - Fix (deprecated) reload device command to accept new
device argument. - Fix luksClose operation for stacked DM devices. - Fix
automatic dm-crypt module loading. - Escape hyphens in man page. - Try to use
pkgconfig for device mapper library. - Detect old dm-crypt module and disable
LUKS suspend/resume. - Fix apitest to work on older systems. - Allow no hash
specification in plain device constructor. - Fix luksOpen reading of passphrase
on stdin (if "-" keyfile specified). - Fix isLuks to initialise crypto backend
(blkid instead is suggested anyway). - Fix package config to use proper package
version. - Avoid class C++ keyword in library header. - Detect and use
devmapper udev support if available (disable by --disable-udev). - Prefer some
device paths in status display. - Support device topology detectionfor data
alignment. - Do not verify unlocking passphrase in luksAddKey command. -
Properly initialise crypto backend in header backup/restore commands. - Fix
udev support for old libdevmapper with not compatible definition.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.3-1
- Update to cryptsetup 1.1.3
* Fri Jul 2 2010 Till Maas <opensource(a)till.name> - 1.1.2-2.1
- Add --with-luks1-keybits 128 --with-plain-mode cbc-plain to %configure to
keep the same default values for F12
* Mon Jun 7 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.2-2
- Fix alignment ioctl use.
- Fix API activation calls to handle NULL device name.
* Sun May 30 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.2-1
- Update to cryptsetup 1.1.2
- Fix luksOpen handling of new line char on stdin.
* Sun May 23 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.1-1
- Update to cryptsetup 1.1.1
- Fix luksClose for stacked LUKS/LVM devices.
* Mon May 3 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.1-0.2
- Update to cryptsetup 1.1.1-rc2.
* Sat May 1 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.1-0.1
- Update to cryptsetup 1.1.1-rc1.
* Sun Jan 17 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.0-1
- Update to cryptsetup 1.1.0.
* Fri Jan 15 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.0-0.6
- Fix gcrypt initialisation.
- Fix backward compatibility for hash algorithm (uppercase).
* Wed Dec 30 2009 Milan Broz <mbroz(a)redhat.com> - 1.1.0-0.5
- Update to cryptsetup 1.1.0-rc4
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #608400 - pam_mount-2.4 is available
https://bugzilla.redhat.com/show_bug.cgi?id=608400
[ 2 ] Bug #599609 - use mount -t crypt instead of mount.crypt for pam_mount crypt volumes for selinux support
https://bugzilla.redhat.com/show_bug.cgi?id=599609
[ 3 ] Bug #610885 - update cryptsetup-luks to 1.1.2 for pam_mount
https://bugzilla.redhat.com/show_bug.cgi?id=610885
[ 4 ] Bug #570315 - pmt-ehd has problems has problems creating large loopback containers
https://bugzilla.redhat.com/show_bug.cgi?id=570315
--------------------------------------------------------------------------------
================================================================================
e2fsprogs-1.41.9-8.fc12 (FEDORA-2010-10720)
Utilities for managing ext2, ext3, and ext4 filesystems
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Eric Sandeen <sandeen(a)redhat.com> 1.41.9-8
- e2fsck: Skip time-based checks if the time looks insane (#577126)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #577126 - Mount time check at boot makes system too fragile, and is not handled well
https://bugzilla.redhat.com/show_bug.cgi?id=577126
--------------------------------------------------------------------------------
================================================================================
eject-2.1.5-18.fc12 (FEDORA-2010-10737)
A program that ejects removable media using software control
--------------------------------------------------------------------------------
Update Information:
handle multi-partition devices with spaces in mount points properly
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Kamil Dudka <kdudka(a)redhat.com> 2.1.5-18
- handle multi-partition devices with spaces in mount points properly (#608502)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #608502 - Fails to unmount phone card accessed via USB due to space in mount point
https://bugzilla.redhat.com/show_bug.cgi?id=608502
--------------------------------------------------------------------------------
================================================================================
eric-4.4.6-1.fc12 (FEDORA-2010-10778)
Python IDE
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Johan Cwiklinski <johan AT x-tnd DOT be> 4.4.6-1
- 4.4.6
--------------------------------------------------------------------------------
================================================================================
garmindev-0.3.4-1.fc12 (FEDORA-2010-10847)
Drivers for communication with Garmin GPS devices
--------------------------------------------------------------------------------
Update Information:
updated top 0.3.4 with these changes: - fix screenshot rotation for 60SCx -
add driver for Forerunner 305
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Dan Horák <dan[at]danny.cz> 0.3.4-1
- update to version 0.3.4
--------------------------------------------------------------------------------
================================================================================
git-1.7.1.1-1.fc12 (FEDORA-2010-10830)
Fast Version Control System
--------------------------------------------------------------------------------
Update Information:
Update to 1.7.1.1 maintenance release. Git 1.7.1 fixes a number of bugs and
various improvements all around. For the full list, see the upstream release
notes: http://www.kernel.org/pub/software/scm/git/docs/RelNotes-1.7.1.txt
The release notes for 1.7.0 are also worth a read when updating from 1.6.6, as
there are a few changes in default behaviors and a number of new features that
are helpful to know about.
http://www.kernel.org/pub/software/scm/git/docs/RelNotes-1.7.0.txt This
update also brings the git packaging into line with the guidelines for emacs
add-ons. If you use emacs together with git, testing the emacs-git and emacs-
git-el packages would be much appreciated. Thanks to Jonathan Underwood.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Adam Tkac <atkac redhat com> - 1.7.1.1-1
- update to 1.7.1.1
* Tue May 4 2010 Todd Zullinger <tmz(a)pobox.com> - 1.7.1-1
- git-1.7.1
- Fix conditionals for EL-6
- Comply with Emacs add-on packaging guidelines (#573423), Jonathan Underwood
- Place elisp source files in separate emacs-git-el package
- Place git support files in own directory under site-lisp
- Use Emacs packaging macros
* Thu Apr 29 2010 Marcela Maslanova <mmaslano(a)redhat.com> - 1.7.0.1-2
- Mass rebuild with perl-5.12.0
* Mon Mar 1 2010 Todd Zullinger <tmz(a)pobox.com> - 1.7.0.1-1
- git-1.7.0.1
* Sat Feb 13 2010 Todd Zullinger <tmz(a)pobox.com> - 1.7.0-1
- git-1.7.0
- Link imap-send with libcrypto (#565147)
- Disable building of unused python remote helper libs
--------------------------------------------------------------------------------
================================================================================
gnome-applet-alarm-clock-0.3.1-1.fc12 (FEDORA-2010-10846)
Alarm clock for the GNOME panel
--------------------------------------------------------------------------------
Update Information:
This update fixes the 'Repeat' function and the option to start an application
when an alarm is due. It also fixes a crash when playing an alarm sound.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Christoph Wickert <cwickert(a)fedoraproject.org> - 0.3.1-1
- Update to 0.3.1 (fixes #597043)
- Switch to new GConf scriptlet macros
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #597043 - Repeat and start application options do not work
https://bugzilla.redhat.com/show_bug.cgi?id=597043
[ 2 ] Bug #597562 - [abrt] crash in gnome-applet-alarm-clock-0.3.0-1.fc12: raise: Process /usr/bin/alarm-clock-applet was killed by signal 6 (SIGABRT)
https://bugzilla.redhat.com/show_bug.cgi?id=597562
[ 3 ] Bug #606488 - [abrt] crash in gnome-applet-alarm-clock-0.3.0-1.fc13: media_player_start: Process /usr/bin/alarm-clock-applet was killed by signal 11 (SIGSEGV)
https://bugzilla.redhat.com/show_bug.cgi?id=606488
[ 4 ] Bug #611278 - Update alarm clock
https://bugzilla.redhat.com/show_bug.cgi?id=611278
--------------------------------------------------------------------------------
================================================================================
ibus-1.3.6-1.fc12 (FEDORA-2010-10773)
Intelligent Input Bus for Linux OS
--------------------------------------------------------------------------------
Update Information:
Bug 611714 - Cannot de-select Hanja lock in applet menu
--------------------------------------------------------------------------------
ChangeLog:
* Tue Jul 6 2010 Takao Fujiwara <takao.fujiwara1(a)gmail.com> - 1.3.6-1
- Update to 1.3.6
* Sat Jun 12 2010 Peng Huang <shawn.p.huang(a)gmail.com> - 1.3.5-1
- Update to 1.3.5
- Support vala.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #611714 - Cannot de-select Hanja lock in applet menu
https://bugzilla.redhat.com/show_bug.cgi?id=611714
--------------------------------------------------------------------------------
================================================================================
kcbench-0.3-6.fc12 (FEDORA-2010-10840)
Kernel compile benchmark
--------------------------------------------------------------------------------
Update Information:
A few small improvements: * a few output format adjustments * fix cleaning
up buildir * create compiledir properly if specified manually * fix two
typos -- one fixes #565325 * use type (bash build in) instead of which Fix
two typos -- one fixes Bug #565325 (kcbench ignores '-c' switch) A few small
improvements: - a few output format adjustments - fix cleaning up buildir -
create compiledir properly if specified manually - fix two typos -- one fixes
#565325
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Thorsten Leemhuis <fedora [AT] leemhuis [DOT] info> - 0.3-6
- use type (bash built in) instead of which to check if all tools are available
* Mon May 24 2010 Thorsten Leemhuis <fedora [AT] leemhuis [DOT] info> - 0.3-5
- a few small adjutments
-- a few output format adjustments
-- fix cleaning up buildir
-- create compiledir properly if specified manually
* Sat Apr 24 2010 Thorsten Leemhuis <fedora [AT] leemhuis [DOT] info> - 0.3-4.1
- fix two typos -- one fixes #565325
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #565325 - kcbench ignores '-c' switch
https://bugzilla.redhat.com/show_bug.cgi?id=565325
--------------------------------------------------------------------------------
================================================================================
libHX-3.4-1.fc12 (FEDORA-2010-8681)
General-purpose library for typical low-level operations
--------------------------------------------------------------------------------
Update Information:
For pam_mount: Notes: - see doc/bugs.txt for cryptsetup behavior that impacts
pam_mount users since version 2.0 Fixes: - umount.crypt: fix use of a wrong
field for smtab/cmtab staleness check - umount.crypt had erroneously mounted
instead of umounted - mount.crypt: fix memory scribble crash when crypto device
could not be initialized - mount.crypt: do not fail when unlocking key slot
other than #0 - fusermount is now called with supplementary groups initialized
- rdconf: do not warn about missing fskeyhash when no fskey specified - mount:
prefer sysv mount API over bsd - pmt-ehd: reword help text for -k option -
pmt-ehd: apply default value for -k option - pmt-ehd: fix fskey generation
which was pegged at 256 bits - pmt-ehd: avoid needless
overtruncation/sparsifying - pmt-ehd: zero LUKS header to avoid setup failure
of PLAIN volume Changes: - pmt-ehd: speed up writing random data - pmt-ehd:
reword help text for -k option - mount.crypt: ignore cmtab update errors -
mount.crypt: add support for keyfile passthru using -ofsk_cipher=none - doc:
document mount.crypt's -o hash option - mount.crypt: warn on ignored options
Fixes: - config: rdconf1 static data had unclosed %(if) tags - config: rdconf1
static data had extraneous %(OPTIONS) parameter Changes: - mount.crypt: make
use of libcryptsetup - cmtab is now stored below localstatedir (usually
/var/run) - use HXformat2. This invalidates old constructs like
%(before=\"-o\"...), which need to be replaced with the new syntax. (See
below.) In general, the old syntax was only used by commands Note to
updaters: As the old syntax %(after=...) %(before=...) %(ifempty=...)
%(ifnempty=...) %(lower=...) %(upper=...) only appeared in commands, and
commands are not part of the default config file anymore since v1.0~15^2~15,
there should be little worry. The configuration options in question are
<cifsmount>, <cryptmount>, <cryptumount>, <fd0ssh>, <fsck>, <fusemount>,
<fuseumount>, <lclmount>, <nfsmount>, <ncpmount>, <ncpumount>, <pmvarrun>,
<smbmount>, <smbumount> <umount> and should normally not be needed in
pam_mount.conf.xml. Changes: - cope better with cryptsetup's assumption that
keysize=256 - augment doc/bugs.txt about caveats with cryptsetup create
Fixes: - avoid a mlock(NULL) when there is no auth token Changes: - print
error code when mkmountpoint failed - print warning when cmtab is not creatable
Changes: - update for libHX 3.4 Fixes: - do decrease the login refcount on
logout when no volumes are defined Fixes: - avoid multi-free of auth token
when pam_mount is rerun in a PAM stack - avoid NULL dereference when there is
an empty line in mtab For cryptsetup: - Fix device alignment ioctl calls
parameters. - Fix activate_by_* API calls to handle NULL device name as
documented. - Fix luksFormat/luksOpen reading passphrase from stdin and "-"
keyfile. - Support --key-file/-d option for luksFormat. - Fix description of
--key-file and add --verbose and --debug options to man page. - Add verbose log
level and move unlocking message there. - Remove device even if underlying
device disappeared. - Fix (deprecated) reload device command to accept new
device argument. - Fix luksClose operation for stacked DM devices. - Fix
automatic dm-crypt module loading. - Escape hyphens in man page. - Try to use
pkgconfig for device mapper library. - Detect old dm-crypt module and disable
LUKS suspend/resume. - Fix apitest to work on older systems. - Allow no hash
specification in plain device constructor. - Fix luksOpen reading of passphrase
on stdin (if "-" keyfile specified). - Fix isLuks to initialise crypto backend
(blkid instead is suggested anyway). - Fix package config to use proper package
version. - Avoid class C++ keyword in library header. - Detect and use
devmapper udev support if available (disable by --disable-udev). - Prefer some
device paths in status display. - Support device topology detectionfor data
alignment. - Do not verify unlocking passphrase in luksAddKey command. -
Properly initialise crypto backend in header backup/restore commands. - Fix
udev support for old libdevmapper with not compatible definition.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 16 2010 Till Maas <opensource(a)till.name> - 3.4-1
- Update to new release
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #608400 - pam_mount-2.4 is available
https://bugzilla.redhat.com/show_bug.cgi?id=608400
[ 2 ] Bug #599609 - use mount -t crypt instead of mount.crypt for pam_mount crypt volumes for selinux support
https://bugzilla.redhat.com/show_bug.cgi?id=599609
[ 3 ] Bug #610885 - update cryptsetup-luks to 1.1.2 for pam_mount
https://bugzilla.redhat.com/show_bug.cgi?id=610885
[ 4 ] Bug #570315 - pmt-ehd has problems has problems creating large loopback containers
https://bugzilla.redhat.com/show_bug.cgi?id=570315
--------------------------------------------------------------------------------
================================================================================
libfishsound-1.0.0-2.fc12 (FEDORA-2010-10777)
Simple programming interface for Xiph.Org codecs
--------------------------------------------------------------------------------
Update Information:
Upstream bugfix/security release; see
http://tinyurl.com/fishsound-1-0-0-relnotes Also fixes a pkg-config bug that
erroneously pulls in the packages that libfishsound wrap
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Michel Salim <salimma(a)fedoraproject.org> - 1.0.0-2
- No longer export dependencies on vorbis, speex, flac
* Sat Jun 12 2010 Michel Salim <salimma(a)fedoraproject.org> - 1.0.0-1
- Update to 1.0.0
--------------------------------------------------------------------------------
================================================================================
libisofs-0.6.34-1.fc12 (FEDORA-2010-10834)
Library to create ISO 9660 disk images
--------------------------------------------------------------------------------
Update Information:
This release provides some features for the next release of libisoburn/xorriso.
Changes towards previous version 0.6.32: * New API call
iso_image_set_boot_catalog_hidden() * New API call iso_node_get_hidden() *
New IsoHideNodeFlag bit LIBISO_HIDE_BUT_WRITE * New error code
ISO_BOOT_NO_CATALOG * Opportunity to reduce compile line lengths by including
"config.h"
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Robert Scheck <robert(a)fedoraproject.org> 0.6.34-1
- Upgrade to 0.6.34
--------------------------------------------------------------------------------
================================================================================
liblinebreak-2.0-1.fc12 (FEDORA-2010-10816)
A Unicode line-breaking library
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Michel Salim <salimma(a)fedoraproject.org> - 2.0-1
- Update to 2.0
--------------------------------------------------------------------------------
================================================================================
libpng10-1.0.54-1.fc12 (FEDORA-2010-10833)
Old version of libpng, needed to run old binaries
--------------------------------------------------------------------------------
Update Information:
This update addresses two security issues: * CVE-2010-1205, in which a buffer
overflow might allow remote attackers to execute arbitrary code via a PNG image
that triggers an additional data row. * CVE-2010-2249, in which a memory leak
allows remote attackers to cause a denial of service (memory consumption and
application crash) via a PNG image containing malformed Physical Scale (aka
sCAL) chunks.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Paul Howarth <paul(a)city-fan.org> 1.0.54-1
- update to 1.0.54
- fixes CVE-2010-1205 (out-of-bounds write to memory)
- fixes CVE-2010-2249 (memory leak with images having malformed sCAL chunks)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #608238 - CVE-2010-1205 libpng: out-of-bounds memory write
https://bugzilla.redhat.com/show_bug.cgi?id=608238
[ 2 ] Bug #608644 - CVE-2010-2249 libpng: Memory leak when processing Physical Scale (sCAL) images
https://bugzilla.redhat.com/show_bug.cgi?id=608644
--------------------------------------------------------------------------------
================================================================================
lshell-0.9.12-2.fc12 (FEDORA-2010-10768)
Python-based limited Shell
--------------------------------------------------------------------------------
Update Information:
lshell provides a limited shell configured per user. The configuration is done
quite simply using a configuration file.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #549296 - Review Request: lshell - Python-based limited Shell
https://bugzilla.redhat.com/show_bug.cgi?id=549296
--------------------------------------------------------------------------------
================================================================================
lxpolkit-0.1.0-0.1.20100402git5087383.fc12 (FEDORA-2010-10771)
Simple PolicyKit authentication agent
--------------------------------------------------------------------------------
Update Information:
LXPolKit is a simple PolicyKit authentication agent developed for LXDE, the
Lightweight X11 Desktop Environment.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #579171 - Review Request: lxpolkit - Simple PolicyKit authentication agent
https://bugzilla.redhat.com/show_bug.cgi?id=579171
--------------------------------------------------------------------------------
================================================================================
lxterminal-0.1.7-2.fc12 (FEDORA-2010-10724)
Desktop-independent VTE-based terminal emulator
--------------------------------------------------------------------------------
Update Information:
This update enables true transparency for the background. The major code rewrite
fixes some crashes.
--------------------------------------------------------------------------------
ChangeLog:
* Thu May 27 2010 Christoph Wickert <cwickert(a)fedoraproject.org> - 0.1.7-2
- Major code rework from git (fixes #571591 and 596358)
* Wed Mar 3 2010 Christoph Wickert <cwickert(a)fedoraproject.org> - 0.1.7-1
- Update to 0.1.7
* Wed Feb 17 2010 Christoph Wickert <cwickert(a)fedoraproject.org> - 0.1.6-3
- Add patch to fix DSO linking (#564717)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #596358 - [abrt] crash in lxterminal-0.1.6-3.fc13: Process /usr/bin/lxterminal was killed by signal 11 (SIGSEGV)
https://bugzilla.redhat.com/show_bug.cgi?id=596358
--------------------------------------------------------------------------------
================================================================================
maildrop-2.5.0-13.fc12 (FEDORA-2010-10845)
Mail delivery agent with filtering abilities
--------------------------------------------------------------------------------
Update Information:
This updates fixes an incompatibility with qmail-scanner. It also updates
maildrop to 2.5.0.
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Axel Thimm <Axel.Thimm(a)ATrpms.net> - 2.5.0-13
- Update to 2.5.0.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #569653 - update to 2.4.0 breaks qmail-scanner-1.25-st-qms
https://bugzilla.redhat.com/show_bug.cgi?id=569653
--------------------------------------------------------------------------------
================================================================================
mercurial-1.6-3.fc12 (FEDORA-2010-10744)
A fast, lightweight distributed source control management system
--------------------------------------------------------------------------------
Update Information:
see http://mercurial.selenic.com/wiki/WhatsNew see
http://mercurial.selenic.com/wiki/WhatsNew see
http://mercurial.selenic.com/wiki/WhatsNew
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Neal Becker <ndbecker2(a)gmail.com> - 1.6-2
- Remove hg-viz, git-rev-tree
* Sun Jul 4 2010 Neal Becker <ndbecker2(a)gmail.com> - 1.6-1
- Update to 1.6
- git-viz is removed
* Fri Jun 25 2010 Neal Becker <ndbecker2(a)gmail.com> - 1.5.4-1
- Don't install mercurial-convert-repo (use hg convert instead)
* Wed Jun 2 2010 Neal Becker <ndbecker2(a)gmail.com> - 1.5.4-1
- Update to 1.5.4
--------------------------------------------------------------------------------
================================================================================
mingw32-libpng-1.2.44-1.fc12 (FEDORA-2010-10776)
MinGW Windows Libpng library
--------------------------------------------------------------------------------
Update Information:
- Update to 1.2.44 - Fixes CVE-2010-1205 and CVE-2010-2249
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Erik van Pienbroek <epienbro(a)fedoraproject.org> - 1.2.44-1
- Update to 1.2.44
- Fixes CVE-2010-1205 and CVE-2010-2249 (RHBZ #608644 and #608238)
* Fri Nov 20 2009 Erik van Pienbroek <epienbro(a)fedoraproject.org> - 1.2.40-2
- In the previous build no symbols were exported in the resulting DLL making this
package unusable. This should be fixed for now (but may need more research)
* Thu Nov 5 2009 Richard W.M. Jones <rjones(a)redhat.com> - 1.2.40-1
- New upstream version 1.2.40.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #608644 - CVE-2010-2249 libpng: Memory leak when processing Physical Scale (sCAL) images
https://bugzilla.redhat.com/show_bug.cgi?id=608644
[ 2 ] Bug #608238 - CVE-2010-1205 libpng: out-of-bounds memory write
https://bugzilla.redhat.com/show_bug.cgi?id=608238
--------------------------------------------------------------------------------
================================================================================
monit-5.1.1-1.fc12 (FEDORA-2010-10767)
Manages and monitors processes, files, directories and devices
--------------------------------------------------------------------------------
Update Information:
Version bump to 5.1.1 and minor specfile changes
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Maxim Burgerhout <wzzrd(a)fedoraproject.org> - 5.1.1-1
- Version bump to 5.1.1 (needed new version of monit-no-startup-msg.patch)
- Ghosted the logfile
--------------------------------------------------------------------------------
================================================================================
mpop-1.0.21-1.fc12 (FEDORA-2010-10762)
POP3 client for recieving mail from POP3 mailboxes
--------------------------------------------------------------------------------
Update Information:
* Sat Jul 03 2010 Fabian Affolter <fabian(a)bernewireless.net> - 1.0.21-1 -
Updated to new upstream version 1.0.21
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Fabian Affolter <fabian(a)bernewireless.net> - 1.0.21-1
- Updated to new upstream version 1.0.21
--------------------------------------------------------------------------------
================================================================================
octave-forge-20090607-17.fc12 (FEDORA-2010-10825)
Contributed functions for octave
--------------------------------------------------------------------------------
Update Information:
Workaround broken 'ann' and 'java' packages by disabling autoloading. This
should fix problems with crashes when running "clear -all" and other commands,
as well as when quitting.
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Alex Lancaster <alexlan[AT]fedoraproject org> - 20090607-17
- Update java patch to disable autoloading of java package
currently this package leads to crashing on exit (#562276)
* Sat Jun 19 2010 Alex Lancaster <alexlan[AT]fedoraproject org> - 20090607-16
- Adapt two patches from Debian to disable autoloading of 'ann' package:
http://patch-tracker.debian.org/patch/series/view/octave-ann/1.0.2+dfsg-2...
http://patch-tracker.debian.org/patch/series/view/octave-ann/1.0.2+dfsg-2...
'ann' currently causes crashes even if not being used.
Should workaround #562276 until upstream fixes the 'ann' package
properly.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #562276 - octave segfaults on a startup from qtoctave
https://bugzilla.redhat.com/show_bug.cgi?id=562276
--------------------------------------------------------------------------------
================================================================================
openoffice.org-3.1.1-19.34.fc12 (FEDORA-2010-10808)
OpenOffice.org comprehensive office suite.
--------------------------------------------------------------------------------
Update Information:
Address reported gtk2 file dialog issues and various crash reports An
experimental update to address reported gtk2 file dialog issues.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Caolán McNamara <caolanm(a)redhat.com> - 1:3.1.1-19.34
- Resolves: rhbz#566831 [abrt] crash in GetFrmSize (dtardon)
* Mon Jun 14 2010 Caolán McNamara <caolanm(a)redhat.com> - 1:3.1.1-19.33
- Resolves: rhbz#603043/rhbz#574984/ooo#112386 improve gtk fpicker stability
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #574984 - openoffice.org hangs repeatedly (insert picture ?)
https://bugzilla.redhat.com/show_bug.cgi?id=574984
[ 2 ] Bug #566831 - [abrt] crash in GetFrmSize
https://bugzilla.redhat.com/show_bug.cgi?id=566831
--------------------------------------------------------------------------------
================================================================================
pam_mount-2.4-2.fc12 (FEDORA-2010-8681)
A PAM module that can mount volumes for a user session
--------------------------------------------------------------------------------
Update Information:
For pam_mount: Notes: - see doc/bugs.txt for cryptsetup behavior that impacts
pam_mount users since version 2.0 Fixes: - umount.crypt: fix use of a wrong
field for smtab/cmtab staleness check - umount.crypt had erroneously mounted
instead of umounted - mount.crypt: fix memory scribble crash when crypto device
could not be initialized - mount.crypt: do not fail when unlocking key slot
other than #0 - fusermount is now called with supplementary groups initialized
- rdconf: do not warn about missing fskeyhash when no fskey specified - mount:
prefer sysv mount API over bsd - pmt-ehd: reword help text for -k option -
pmt-ehd: apply default value for -k option - pmt-ehd: fix fskey generation
which was pegged at 256 bits - pmt-ehd: avoid needless
overtruncation/sparsifying - pmt-ehd: zero LUKS header to avoid setup failure
of PLAIN volume Changes: - pmt-ehd: speed up writing random data - pmt-ehd:
reword help text for -k option - mount.crypt: ignore cmtab update errors -
mount.crypt: add support for keyfile passthru using -ofsk_cipher=none - doc:
document mount.crypt's -o hash option - mount.crypt: warn on ignored options
Fixes: - config: rdconf1 static data had unclosed %(if) tags - config: rdconf1
static data had extraneous %(OPTIONS) parameter Changes: - mount.crypt: make
use of libcryptsetup - cmtab is now stored below localstatedir (usually
/var/run) - use HXformat2. This invalidates old constructs like
%(before=\"-o\"...), which need to be replaced with the new syntax. (See
below.) In general, the old syntax was only used by commands Note to
updaters: As the old syntax %(after=...) %(before=...) %(ifempty=...)
%(ifnempty=...) %(lower=...) %(upper=...) only appeared in commands, and
commands are not part of the default config file anymore since v1.0~15^2~15,
there should be little worry. The configuration options in question are
<cifsmount>, <cryptmount>, <cryptumount>, <fd0ssh>, <fsck>, <fusemount>,
<fuseumount>, <lclmount>, <nfsmount>, <ncpmount>, <ncpumount>, <pmvarrun>,
<smbmount>, <smbumount> <umount> and should normally not be needed in
pam_mount.conf.xml. Changes: - cope better with cryptsetup's assumption that
keysize=256 - augment doc/bugs.txt about caveats with cryptsetup create
Fixes: - avoid a mlock(NULL) when there is no auth token Changes: - print
error code when mkmountpoint failed - print warning when cmtab is not creatable
Changes: - update for libHX 3.4 Fixes: - do decrease the login refcount on
logout when no volumes are defined Fixes: - avoid multi-free of auth token
when pam_mount is rerun in a PAM stack - avoid NULL dereference when there is
an empty line in mtab For cryptsetup: - Fix device alignment ioctl calls
parameters. - Fix activate_by_* API calls to handle NULL device name as
documented. - Fix luksFormat/luksOpen reading passphrase from stdin and "-"
keyfile. - Support --key-file/-d option for luksFormat. - Fix description of
--key-file and add --verbose and --debug options to man page. - Add verbose log
level and move unlocking message there. - Remove device even if underlying
device disappeared. - Fix (deprecated) reload device command to accept new
device argument. - Fix luksClose operation for stacked DM devices. - Fix
automatic dm-crypt module loading. - Escape hyphens in man page. - Try to use
pkgconfig for device mapper library. - Detect old dm-crypt module and disable
LUKS suspend/resume. - Fix apitest to work on older systems. - Allow no hash
specification in plain device constructor. - Fix luksOpen reading of passphrase
on stdin (if "-" keyfile specified). - Fix isLuks to initialise crypto backend
(blkid instead is suggested anyway). - Fix package config to use proper package
version. - Avoid class C++ keyword in library header. - Detect and use
devmapper udev support if available (disable by --disable-udev). - Prefer some
device paths in status display. - Support device topology detectionfor data
alignment. - Do not verify unlocking passphrase in luksAddKey command. -
Properly initialise crypto backend in header backup/restore commands. - Fix
udev support for old libdevmapper with not compatible definition.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Till Maas <opensource(a)till.name> - 2.4-2
- Add cryptsetup-luks-libs Requires
- list all manpages explicitly
* Fri Jul 2 2010 Till Maas <opensource(a)till.name> - 2.4-1
- Update to new release
- add patch to keep cmtab at /etc
- add patch to use mount -t crypt instead of mount.crypt for crypto volumes
- BR cryptsetup-luks-devel >= 1.1.2
- add man-db BR for Fedora >= 14 for pam_mount.8 to pam_mount.txt conversion
- add Patch to remove man-db BR for Fedora < 14
* Wed May 19 2010 Till Maas <opensource(a)till.name> - 2.3-1
- Update to new release
* Sun May 16 2010 Till Maas <opensource(a)till.name> - 2.2-1
- Update to new release
* Sun May 16 2010 Till Maas <opensource(a)till.name> - 2.1-1
- Update to new release
- Add BuildRequires: cryptsetup-luks-devel
- Cleanup BRs
- Add Requires: /bin/readlink
- Update libHX dependency
* Mon Jan 4 2010 Till Maas <opensource(a)till.name> - 1.32-2
- Do not package compatibility symlinks anymore
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #608400 - pam_mount-2.4 is available
https://bugzilla.redhat.com/show_bug.cgi?id=608400
[ 2 ] Bug #599609 - use mount -t crypt instead of mount.crypt for pam_mount crypt volumes for selinux support
https://bugzilla.redhat.com/show_bug.cgi?id=599609
[ 3 ] Bug #610885 - update cryptsetup-luks to 1.1.2 for pam_mount
https://bugzilla.redhat.com/show_bug.cgi?id=610885
[ 4 ] Bug #570315 - pmt-ehd has problems has problems creating large loopback containers
https://bugzilla.redhat.com/show_bug.cgi?id=570315
--------------------------------------------------------------------------------
================================================================================
pcsc-lite-1.5.2-5.fc12 (FEDORA-2010-10764)
PC/SC Lite smart card framework and applications
--------------------------------------------------------------------------------
Update Information:
This update fixes up incorrect checks which were introduced with CVE-2010-0407
patch, introducing a regression for certain token types.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Kalev Lember <kalev(a)smartlink.ee> - 1.5.2-5
- Fix up incorrect checks in CVE-2010-0407.patch (#596426)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #596426 - CVE-2010-0407 pcsc-lite: Privilege escalation via specially-crafted client to PC/SC Smart Card daemon messages
https://bugzilla.redhat.com/show_bug.cgi?id=596426
--------------------------------------------------------------------------------
================================================================================
perl-Devel-PartialDump-0.13-1.fc12 (FEDORA-2010-10741)
Partial dumping of data structures, optimized for argument printing
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #611165 - Review Request: perl-Devel-PartialDump - Partial dumping of data structures, optimized for argument printing
https://bugzilla.redhat.com/show_bug.cgi?id=611165
--------------------------------------------------------------------------------
================================================================================
php-eaccelerator-0.9.6.1-1.fc12 (FEDORA-2010-10719)
PHP accelerator, optimizer, encoder and dynamic content cacher
--------------------------------------------------------------------------------
Update Information:
Fix some PHP 5.3 related issues. Only minor bugs have been fixed.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Remi Collet <Fedora(a)FamilleCollet.com> - 1:0.9.6.1-1
- update to 0.9.6.1
--------------------------------------------------------------------------------
================================================================================
publican-2.0-0.fc12 (FEDORA-2010-10749)
Common files and scripts for publishing with DocBook XML
--------------------------------------------------------------------------------
Update Information:
* Tue Jul 06 2010 Jeff Fearn <jfearn(a)redhat.com> 2.0-0 - Add Publican::Website.
- Add web_*_label params for web menus. - Add underscores to cleanset,
installbrand, and printtree. BZ #581090 - Update docs with Website content -
Update brand license text. - Fix different log jar path on F14+ - Add
constraint to help_config output. - Fix segfault when indexterm has no leading
content. BZ #592666 - Fix inline indexterm. BZ #592823 - Translate productname
tag. BZ #592669 - Fix formalpara missing ID. BZ #595564 - Add dummy lang.css
to avoid 404's. BZ #595799 - Improve validation error message. BZ #593887 -
Fix qandaentry ID. BZ #593892 - Fix Icon non-conformance. BZ #593890 - Fix
admonitions splitting across pages. BZ #596257 - Fix HTML simple list border.
BZ #599258 - Fix formal object IDs. BZ #601363 - Fix Revision History layout.
BZ #559787 #598828 #598833 - Remove title color from term in HTML. BZ #592822
- Fix highlight breaking callouts. BZ #590933 - Add support for LineColumn
coords in area tag. - Update font requires for F12 and F13. - Fix clean_ids
adding newline to verbatim. BZ #604465 - Fix index missing ID. BZ #606418 -
Fix files dir being missed. BZ #609345 - Adjust admonition layout.
--------------------------------------------------------------------------------
ChangeLog:
* Tue Jul 6 2010 Jeff Fearn <jfearn(a)redhat.com> 2.0-0
- Add Publican::Website.
- Add web_*_label params for web menus.
- Add underscores to cleanset, installbrand, and printtree. BZ #581090
- Update docs with Website content
- Update brand license text.
- Fix different log jar path on F14+
- Add constraint to help_config output.
- Fix segfault when indexterm has no leading content. BZ #592666
- Fix inline indexterm. BZ #592823
- Translate productname tag. BZ #592669
- Fix formalpara missing ID. BZ #595564
- Add dummy lang.css to avoid 404's. BZ #595799
- Improve validation error message. BZ #593887
- Fix qandaentry ID. BZ #593892
- Fix Icon non-conformance. BZ #593890
- Fix admonitions splitting across pages. BZ #596257
- Fix HTML simple list border. BZ #599258
- Fix formal object IDs. BZ #601363
- Fix Revision History layout. BZ #559787 #598828 #598833
- Remove title color from term in HTML. BZ #592822
- Fix highlight breaking callouts. BZ #590933
- Add support for LineColumn coords in area tag.
- Update font requires for F12 and F13.
- Fix clean_ids adding newline to verbatim. BZ #604465
- Fix index missing ID. BZ #606418
- Fix files dir being missed. BZ #609345
- Adjust admonition layout.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #581090 - inconsistent action naming style
https://bugzilla.redhat.com/show_bug.cgi?id=581090
[ 2 ] Bug #592666 - PO matching fails when <indexterm> follows another tag without a space
https://bugzilla.redhat.com/show_bug.cgi?id=592666
[ 3 ] Bug #592823 - <indexterm> should not break a paragraph for translation
https://bugzilla.redhat.com/show_bug.cgi?id=592823
[ 4 ] Bug #592669 - RFE -- make <productname> translatable
https://bugzilla.redhat.com/show_bug.cgi?id=592669
[ 5 ] Bug #595564 - RFE: can xref links to formalpara go to the actual formalpara, rather than top of the page?
https://bugzilla.redhat.com/show_bug.cgi?id=595564
[ 6 ] Bug #595799 - Missing lang.css file when publishing to web to avoid 404s
https://bugzilla.redhat.com/show_bug.cgi?id=595799
[ 7 ] Bug #593887 - Terse validity error messages make troubleshooting XML structure issues difficult.
https://bugzilla.redhat.com/show_bug.cgi?id=593887
[ 8 ] Bug #593892 - Hyperlinks in FAQ do not work
https://bugzilla.redhat.com/show_bug.cgi?id=593892
--------------------------------------------------------------------------------
================================================================================
python-cjson-1.0.5-5.fc12 (FEDORA-2010-10710)
Fast JSON encoder/decoder for Python
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Felix Schwarz <felix.schwarz(a)oss.schwarz.eu> - 1.0.5-5
- CVE-2010-1666 (fixed by including a patch from Ubuntu, see Launchpad 585274)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #610877 - CVE-2010-1666 python-cjson: Buffer overflow (crash) when encoding wide Unicode characters on UTF-32/UCS-4
https://bugzilla.redhat.com/show_bug.cgi?id=610877
--------------------------------------------------------------------------------
================================================================================
python-ferari-0.2.0-1.fc12 (FEDORA-2010-10732)
Optimizer for finite element code
--------------------------------------------------------------------------------
Update Information:
* Sat Jul 03 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.2.0-1 -
Updated to new upstream version 0.2.0 - Added new doc files - Updated source
url
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.2.0-1
- Updated to new upstream version 0.2.0
- Added new doc files
- Updated source url
--------------------------------------------------------------------------------
================================================================================
python-fiat-0.9.2-1.fc12 (FEDORA-2010-10751)
Generation of arbitrary order instances of the Lagrange elements
--------------------------------------------------------------------------------
Update Information:
* Sat Jul 03 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.9.2-1 -
Updated to new upstream version 0.9.2 - Updated source url
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.9.2-1
- Updated to new upstream version 0.9.2
- Updated source url
* Tue Feb 23 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.9.1-1
- Changed source URL
- Added docs
- Updated to new upsteram version 0.9.1
--------------------------------------------------------------------------------
================================================================================
python-instant-0.9.8-1.fc12 (FEDORA-2010-10754)
Python module for instant inlining of C and C++ code
--------------------------------------------------------------------------------
Update Information:
* Sat Jul 03 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.9.8-1 -
Updated to new upsteam version 0.9.8 - Updated the spec file to reflect changes
in the guidelines - Updated docs
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.9.8-1
- Updated to new upsteam version 0.9.8
- Updated the spec file to reflect changes in the guidelines
- Updated docs
--------------------------------------------------------------------------------
================================================================================
python-markdown2-1.0.1.17-1.fc12 (FEDORA-2010-10743)
A fast and complete Python implementation of Markdown
--------------------------------------------------------------------------------
Update Information:
Update to upstream version 1.0.1.17. Changes include: * Fixes "cuddled-
lists" extra handling for an looks-like-a-cuddled-list-but-is-indented block.
* Experimental new "toc" extra. * New "header-ids" extra. * Preliminary
support for "html-classes" extra. See http://code.google.com/p/python-
markdown2/source/browse/tags/v1.0.1.17/CHANGES.txt for the full changelist.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jun 3 2010 Thomas Moschny <thomas.moschny(a)gmx.de> - 1.0.1.17-1
- Update to 1.0.17.
- Add patch for failing test.
* Tue Dec 29 2009 Thomas Moschny <thomas.moschny(a)gmx.de> - 1.0.1.16-2
- Patch for older pygments on rhel no longer needed, pygments has been
updated in EPEL.
--------------------------------------------------------------------------------
================================================================================
python-textile-2.1.4-3.fc12 (FEDORA-2010-10831)
A Humane Web Text Generator
--------------------------------------------------------------------------------
Update Information:
Update to upstream version 2.1.4.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Apr 16 2010 Thomas Moschny <thomas.moschny(a)gmx.de> - 2.1.4-3
- Simplify %check.
* Fri Apr 16 2010 Thomas Moschny <thomas.moschny(a)gmx.de> - 2.1.4-2
- Add missing BR python-nose for the tests.
- Actually run the tests in %check.
- Remove obsolete comment about tidy.
* Fri Apr 16 2010 Thomas Moschny <thomas.moschny(a)gmx.de> - 2.1.4-1
- Update to 2.1.4.
- Use %global instead of %define.
- README is missing in the tarfile.
--------------------------------------------------------------------------------
================================================================================
qcad-2.0.5.0-12.fc12 (FEDORA-2010-10740)
Simple 2D CAD program
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Alain Portal <alain.portal AT univ-montp2 DOT fr> - 2.0.5.0-12
- Patch to add some missing caracters to the latin1 charset
- Patch to to fix a french mispelling
- Frenchify desktop and spec files
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #611108 - Not all the additionnal latin1 caracters are support
https://bugzilla.redhat.com/show_bug.cgi?id=611108
--------------------------------------------------------------------------------
================================================================================
qlandkartegt-0.18.3-1.fc12 (FEDORA-2010-10765)
GPS device mapping tool
--------------------------------------------------------------------------------
Update Information:
update to 0.18.3 with these fixes and enhacements: - Fixed: typ file not
working on device. - Sort waypoints by name, icon or position - Make track
bubbles an option - Fine tune reference offset for raster maps - Fix
performance stall when loading large quantity (>2000) of waypoints Updated QT
library from https://bugzilla.redhat.com/show_bug.cgi?id=498111#c81 can be
needed for a correct function. update to 0.18.2 with these changes: - Dutch
translation - Add gpsd support (in Rawhide only) - Optimize map rendering for
Garmin maps - Add selection for typ file if there are several update to
0.18.2 with these changes: - Dutch translation - Add gpsd support (in Rawhide
only) - Optimize map rendering for Garmin maps - Add selection for typ file if
there are several
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Dan Horák <dan[at]danny.cz> 0.18.3-1
- update to 0.18.3
- dropped the gtkstyle hack
* Wed May 12 2010 Dan Horák <dan[at]danny.cz> 0.18.2-1
- update to 0.18.2
--------------------------------------------------------------------------------
================================================================================
qlandkartegt-0.18.3-2.fc12 (FEDORA-2010-10843)
GPS device mapping tool
--------------------------------------------------------------------------------
Update Information:
rebuild for newer garmindev
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Dan Horák <dan[at]danny.cz> 0.18.3-2
- newer garmindev is needed
* Sat Jul 3 2010 Dan Horák <dan[at]danny.cz> 0.18.3-1
- update to 0.18.3
- dropped the gtkstyle hack
* Wed May 12 2010 Dan Horák <dan[at]danny.cz> 0.18.2-1
- update to 0.18.2
--------------------------------------------------------------------------------
================================================================================
qlandkartegt-0.18.4-1.fc12 (FEDORA-2010-10739)
GPS device mapping tool
--------------------------------------------------------------------------------
Update Information:
update to 0.18.4 with these fixes and enhancements: - Keep on adding points
when adding points to start or end of distance polyline - Fix: End points are
deleted when moving around is aborted. - Add speed and estimated time to
distance polyline - Select items for export/upload - Fix: Proximity circles
are not drawn if waypoint leaves viewport - Make distance polyline follow lines
in vector map - Change shortcut description from Del to Ctrl + Del in left hand
tool widgets
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Dan Horák <dan[at]danny.cz> 0.18.4-1
- update to 0.18.4
* Sun Jul 4 2010 Dan Horák <dan[at]danny.cz> 0.18.3-2
- newer garmindev is needed
* Sat Jul 3 2010 Dan Horák <dan[at]danny.cz> 0.18.3-1
- update to 0.18.3
- dropped the gtkstyle hack
* Wed May 12 2010 Dan Horák <dan[at]danny.cz> 0.18.2-1
- update to 0.18.2
--------------------------------------------------------------------------------
================================================================================
sslogger-0.96-2.fc12 (FEDORA-2010-10734)
A keystroke logging utility for privileged user escalation
--------------------------------------------------------------------------------
Update Information:
Updated to latest upstream release
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jul 1 2010 <ebrand(a)fedoraproject.org> 0.96-2
- spec file typo fixes
* Mon Jun 21 2010 <ebrand(a)fedoraproject.org> 0.96-1
- lateset upstream release
- added -r "Reason" to sslogger
- ssloger now display remote slogd server and logID
- sslogger.c bug fixed when writing to localfile using -c and local logging disabled
- Config file moved to /etc/sslogger.d/sslogger.conf
- fixed cordump when tls session is NULL
* Tue Jun 8 2010 <ebrand(a)fedoraproject.org> 0.95-2
- rpm row claims ownership of directory /usr/share/doc/sslogger-<version>
* Sun Jun 6 2010 <edbrand(a)brandint.com> - 0.95-1
- latest upteam release
* Sun Jun 6 2010 <edbrand(a)brandint.com> - 0.94-4
- init script fixes
* Sun Jun 6 2010 <edbrand(a)brandint.com> - 0.94-3
- remaned /var/run/slogd/ /var/run/sslogger
- Renamed slogd binaries sslogger-slogd to match package name
* Mon May 31 2010 <edbrand(a)brandint.com> - 0.94-2
- Spec file fixes:
- pid filename changed to match package
- changed daemon name to match package name
* Sun May 2 2010 <edbrand(a)brandint.com> - 0.94-1
- Fixed bugs in tlsclient, updated release
- Added '-l' option to sslogger
- Added rslog
- Split sslogger-slogd into its own package
- added -lgcrypt in Makefile
* Tue Dec 29 2009 Ed Brand <edbrand(a)brandint.com> - 0.91-10
- Changed $define to $global in spec file
* Tue Dec 29 2009 Ed Brand <edbrand(a)brandint.com> - 0.91-9
- Notify slog server and gracefully termiate tls session when
- running -c <cmd> with log_all_cmds=0
* Tue Dec 29 2009 Ed Brand <edbrand(a)brandint.com> - 0.91-8
- changed popen to dump stderr to stdout
* Tue Dec 29 2009 Ed Brand <edbrand(a)brandint.com> - 0.91-7
- fixed SIGPIP on server close connection
* Tue Dec 29 2009 Ed Brand <edbrand(a)brandint.com> - 0.91-1
- added remote tls logging and slogd server
--------------------------------------------------------------------------------
================================================================================
vifir-0.6-1.fc12 (FEDORA-2010-10769)
A viewer for electronic aviation charts
--------------------------------------------------------------------------------
Update Information:
Update for upstream vifir-0.6-1 release
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Dave Ludlow <dave(a)adsllc.com> 0.6-1
- Support the gpsd version 4 API
- Improve the gps data timeout calculation
- Fix checking for valid lat/lon data
- Add gpsd host/port configuration options
- Add ccache compiler-cache support
- Prevent crashes when no data volume is active
--------------------------------------------------------------------------------
================================================================================
wine-1.2.0-0.6.rc6.fc12 (FEDORA-2010-8446)
A Windows 16/32/64 bit emulator
--------------------------------------------------------------------------------
Update Information:
* rework for wow64 support * font package guideline support * latest
winepulse * various cleanups Attention wow64 users: It may be necessary to
start out with a clean ~/.wine
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.2-0.6.rc6
- version upgrade
- use new winelogo from user32
- winepulse upgrade
* Sun Jun 27 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.2-0.5.rc5
- version upgrade
- require liberation-narrow-fonts
* Fri Jun 18 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.2-0.4.rc4
- version upgrade
- fixes winecfg on 64bit (#541986)
- require wine-common from -core to ensure man pages and wine.inf are present
(#528335)
* Sun Jun 13 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.2-0.3.rc3
- version upgrade
* Mon May 31 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.2-0.2.rc2
- version upgrade
* Mon May 24 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.2-0.1.rc1
- upgrade to rc1
- add BR for ImageMagick and icoutils
- spec cleanup
- install available icon files (#594950)
- desktop package requires wine x86-32 because of wine/wine64 rename
- put system/small fonts in right place
* Wed May 19 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.44-5
- fix font issues
* Thu May 13 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.44-4
- fix install of 32bit only wine on x86_64 via install wine.i686
* Wed May 12 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.44-3
- move wine symlink to -wow for 32bit (#591690)
* Tue May 11 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.44-2
- fix manpage conflict between -common and -devel
* Sun May 9 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.44-1
- version upgrade (#580024)
* Sun Apr 18 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.43-1
- version upgrade
* Sun Apr 11 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.42-1
- version upgrade
- rework for wow64
* Mon Mar 29 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.41-3
- add support for mingw32-wine-gecko
* Sun Mar 28 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.41-2
- convert to font package guidelines
- add libv4l-devel BR
* Sun Mar 28 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.41-1
- version upgrade (#577587, #576607)
- winepulse upgrade (0.36)
* Sat Mar 6 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.40-1
- version upgrade
* Sun Feb 21 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.39-1
- version upgrade
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #580024 - wine-1.1.44 is available
https://bugzilla.redhat.com/show_bug.cgi?id=580024
[ 2 ] Bug #591690 - wine 32-bit and 64-bit packages share /usr/bin/wine
https://bugzilla.redhat.com/show_bug.cgi?id=591690
[ 3 ] Bug #594950 - Use new icons for Wine menu
https://bugzilla.redhat.com/show_bug.cgi?id=594950
[ 4 ] Bug #603337 - Wine 1.2-rc3 is available
https://bugzilla.redhat.com/show_bug.cgi?id=603337
[ 5 ] Bug #541986 - Wine -- winecfg crashes clicking the Audio tab when wine-{alsa,pulseaudio,oss} are installed
https://bugzilla.redhat.com/show_bug.cgi?id=541986
[ 6 ] Bug #528335 - wine-common not required by wine-core
https://bugzilla.redhat.com/show_bug.cgi?id=528335
--------------------------------------------------------------------------------
================================================================================
xautomation-1.03-3.fc12 (FEDORA-2010-10715)
Tools to automate tasks in X, even detecting on screen images
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #603904 - Review Request: xautomation - Tools to automate tasks in X, even detecting on screen images
https://bugzilla.redhat.com/show_bug.cgi?id=603904
--------------------------------------------------------------------------------
================================================================================
xbacklight-1.1.1-1.fc12 (FEDORA-2010-10810)
Adjust backlight brightness using RandR
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Michel Salim <salimma(a)fedoraproject.org> - 1.1.1-1
- Update to 1.1.1
--------------------------------------------------------------------------------
================================================================================
xtide-2.11-0.8.RC1.fc12 (FEDORA-2010-10726)
Calculate tide all over the world
--------------------------------------------------------------------------------
Update Information:
New version 2.11 RC1 is released.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Mamoru Tasaka <mtasaka(a)ioa.s.u-tokyo.ac.jp> - 2.11-0.8.RC1
- 2.11 RC1
* Fri Jul 2 2010 Mamoru Tasaka <mtasaka(a)ioa.s.u-tokyo.ac.jp> - 2.11-0.7.dev20100625
- Update to 2.11 dev 20100625
* Tue Jun 1 2010 Mamoru Tasaka <mtasaka(a)ioa.s.u-tokyo.ac.jp> - 2.11-0.6.dev20100406
- Update dwf data to 20100529
* Thu May 27 2010 Mamoru Tasaka <mtasaka(a)ioa.s.u-tokyo.ac.jp> - 2.11-0.5.dev20100406
- Update dwf data to 20100522
* Fri May 7 2010 Mamoru Tasaka <mtasaka(a)ioa.s.u-tokyo.ac.jp> - 2.11-0.4.dev20100406
- F-14+: enable gpsd support
* Thu Apr 8 2010 Mamoru Tasaka <mtasaka(a)ioa.s.u-tokyo.ac.jp> - 2.11-0.3.dev20100406
- Update to 2.11 dev20100406
* Sat Jan 2 2010 Mamoru Tasaka <mtasaka(a)ioa.s.u-tokyo.ac.jp> - 2.11-0.2.dev20091227
- Update to 2.11 dev20091227
- Update to dwf data 20091227
* Mon Sep 14 2009 Mamoru Tasaka <mtasaka(a)ioa.s.u-tokyo.ac.jp> - 2.11-0.1.dev20090913
- Update to 2.11 development branch
--------------------------------------------------------------------------------
================================================================================
zfs-fuse-0.6.9-5.fc12 (FEDORA-2010-10761)
ZFS ported to Linux FUSE
--------------------------------------------------------------------------------
Update Information:
* Mon Jul 05 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9-5 - Cleanup of RPM spec
and init script * Sun Jul 04 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9-4 -
Patched SConstruct to define NDEBUG instead of DEBUG to avoid debug code while
still generating debug symbols - Added moving of zfs.cache when updating from
pre 0.6.9 version * Sat Jul 03 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9-2 -
Updated to upstream stable release 0.6.9 - Patched default debug level from 0 to
1 - Fixed missing compiler flags and debug flag in build: BUG 595442 * Sat May
22 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9_beta3-6 - Updated to upstream
version 0.6.9_beta3 - Add more build requires to build on F13 BUG 565076 - Add
patches for missing libraries and includes to build on F13 BUG 565076 - Added
packages for ppc and ppc64 - Build on F13 BUG 565076 - Fixes BUG 558172 - Added
man files - Added zfs_pool_alert - Added zstreamdump - Fixed bug in automatic
scrub script BUG 559518
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9-5
- Cleanup of RPM spec and init script
* Sun Jul 4 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9-4
- Patched SConstruct to define NDEBUG instead of DEBUG to avoid debug code while still generating debug symbols
- Added moving of zfs.cache when updating from pre 0.6.9 version
* Sat Jul 3 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9-2
- Updated to upstream stable release 0.6.9
- Patched default debug level from 0 to 1
- Fixed missing compiler flags and debug flag in build: BUG 595442
* Sat May 22 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9_beta3-6
- Updated to upstream version 0.6.9_beta3
- Add more build requires to build on F13 BUG 565076
- Add patches for missing libraries and includes to build on F13 BUG 565076
- Added packages for ppc and ppc64
- Build on F13 BUG 565076
- Fixes BUG 558172
- Added man files
- Added zfs_pool_alert
- Added zstreamdump
- Fixed bug in automatic scrub script BUG 559518
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #595442 - zfs-fuse 0.6.9_beta3-6.fc14 not built with $RPM_OPT_FLAGS
https://bugzilla.redhat.com/show_bug.cgi?id=595442
[ 2 ] Bug #565076 - FTBFS zfs-fuse-0.6.0-6.fc13
https://bugzilla.redhat.com/show_bug.cgi?id=565076
[ 3 ] Bug #558172 - zfs-fuse hangs on complex pools.
https://bugzilla.redhat.com/show_bug.cgi?id=558172
[ 4 ] Bug #559518 - /etc/cron.weekly/98-zfs-fuse-scrub fails due to syntax errors
https://bugzilla.redhat.com/show_bug.cgi?id=559518
--------------------------------------------------------------------------------
13 years, 9 months
Fedora 13 updates-testing report
by updates@fedoraproject.org
The following builds have been pushed to Fedora 13 updates-testing
OpenLP-1.9.2.1-1.fc13
OpenSceneGraph-2.8.2-4.fc13
R-GeneR-2.18.1-1.fc13
R-hgu95av2probe-2.6.0-1.fc13
audit-viewer-0.6.2-2.fc13
bigloo-3.3a-2.5.fc13
bitlbee-1.2.8-1.fc13
cnucnu-0-0.4.20100704git0fe054e7.fc13
cryptsetup-luks-1.1.3-1.fc13
django-flash-1.7.2-2.fc13
django-typepad-1.1.3-1.fc13
dot2tex-2.8.7-3.fc13
e2fsprogs-1.41.10-7.fc13
eject-2.1.5-19.fc13
ember-0.5.6-5.fc13
eric-4.4.6-1.fc13
garmindev-0.3.4-1.fc13
git-1.7.1.1-1.fc13
gnome-applet-alarm-clock-0.3.1-1.fc13
ibus-1.3.6-1.fc13
jokosher-1.0-0.12.20100703bzr.fc13
kcbench-0.3-6.fc13
konversation-1.3.1-1.fc13
libHX-3.4-1.fc13
libchamplain-0.4.6-1.fc13
libfishsound-1.0.0-2.fc13
libisofs-0.6.34-1.fc13
liblinebreak-2.0-1.fc13
libmicrohttpd-0.4.6-1.fc13
libpng10-1.0.54-1.fc13
lshell-0.9.12-2.fc13
lxpolkit-0.1.0-0.1.20100402git5087383.fc13
lxterminal-0.1.7-2.fc13
mailcap-2.1.33-1.fc13
maildrop-2.5.0-13.fc13
mercurial-1.6-3.fc13
mingw32-gtk2-2.20.1-2.fc13
mingw32-libpng-1.2.44-1.fc13
monit-5.1.1-1.fc13
monotone-0.48-1.fc13
mpop-1.0.21-1.fc13
octave-forge-20090607-17.fc13
pam_mount-2.4-2.fc13
perl-Devel-PartialDump-0.13-1.fc13
perl-Statistics-Descriptive-3.0200-1.fc13
perl-Test-Smoke-1.43-1.fc13
perl-Test-TempDir-0.05-3.fc13
php-eaccelerator-0.9.6.1-1.fc13
php-phpmd-PHP-PMD-0.2.6-1.fc13
proftpd-1.3.3a-1.fc13
publican-2.0-0.fc13
python-cjson-1.0.5-5.fc13
python-ferari-0.2.0-1.fc13
python-fiat-0.9.2-1.fc13
python-instant-0.9.8-1.fc13
python-markdown2-1.0.1.17-1.fc13
python-setuptools-0.6.13-5.fc13
python-textile-2.1.4-3.fc13
python-typepad-1.1.2-1.fc13
qcad-2.0.5.0-12.fc13
qlandkartegt-0.18.3-1.fc13
qlandkartegt-0.18.3-2.fc13
qlandkartegt-0.18.4-1.fc13
sslogger-0.96-2.fc13
typepad-motion-1.1.3-1.fc13
vifir-0.6-1.fc13
wine-1.2.0-0.6.rc6.fc13
xautomation-1.03-3.fc13
xbacklight-1.1.1-1.fc13
xterm-261-2.fc13
xtide-2.11-0.8.RC1.fc13
yumex-2.9.9-1.fc13
zfs-fuse-0.6.9-5.fc13
Details about builds:
================================================================================
OpenLP-1.9.2.1-1.fc13 (FEDORA-2010-10841)
Open source Church presentation and lyrics projection application
--------------------------------------------------------------------------------
Update Information:
Fix problem with startup message OpenLP version 1.9.2 (Alpha 2) Many bug fixes,
enhancements and new features
--------------------------------------------------------------------------------
ChangeLog:
--------------------------------------------------------------------------------
================================================================================
OpenSceneGraph-2.8.2-4.fc13 (FEDORA-2010-10812)
High performance real-time graphics toolkit
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Ralf Corsépius <corsepiu(a)fedoraproject.org> - 2.8.2-4
- Add osg-examples-gtk.
- Spec overhaul.
--------------------------------------------------------------------------------
================================================================================
R-GeneR-2.18.1-1.fc13 (FEDORA-2010-10785)
R for genes and sequences analysis
--------------------------------------------------------------------------------
Update Information:
New release
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 pingou <pingou(a)pingoured.fr> 2.18.1-1
- Update to version 2.18.1
- Remove link to BioC
- Remove R post and R postun
- Remove patch from Milos (Thanks to him)
--------------------------------------------------------------------------------
================================================================================
R-hgu95av2probe-2.6.0-1.fc13 (FEDORA-2010-10711)
Probe sequence data for microarrays of type hgu95av2
--------------------------------------------------------------------------------
Update Information:
New release
--------------------------------------------------------------------------------
ChangeLog:
* Tue Jul 6 2010 pingou <pingou(a)pingoured.fr> 2.6.0-1
- Update to version 2.6.0
- Fix URL and source0 to a more stable format
- Remove R post and R postun
--------------------------------------------------------------------------------
================================================================================
audit-viewer-0.6.2-2.fc13 (FEDORA-2010-10815)
Audit event viewer
--------------------------------------------------------------------------------
Update Information:
This update fixes a crash when chart labels include the '/' character (e.g.
paths)
--------------------------------------------------------------------------------
ChangeLog:
* Wed Mar 31 2010 Miloslav Trmač <mitr(a)redhat.com> - 0.6.2-2
- Fix chart display if any of the labels contain '/'
- Include 'date' among field names for making reports
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #601238 - [abrt] crash in audit-viewer-0.6.2-1.fc13: font.py:261:__parse_int:ValueError: invalid literal for int() with base 10: ''
https://bugzilla.redhat.com/show_bug.cgi?id=601238
--------------------------------------------------------------------------------
================================================================================
bigloo-3.3a-2.5.fc13 (FEDORA-2010-10755)
A compiler for the Scheme programming language
--------------------------------------------------------------------------------
Update Information:
Updated Emacs packaging to comply with our Emacs guidelines; disabled XEmacs
subpackages since they are broken at the moment
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Michel Salim <salimma(a)fedoraproject.org> - 3.3a-2.5
- Now complies with Emacs packaging guidelines
- Disable broken XEmacs subpackages
--------------------------------------------------------------------------------
================================================================================
bitlbee-1.2.8-1.fc13 (FEDORA-2010-10713)
IRC to other chat networks gateway
--------------------------------------------------------------------------------
Update Information:
- Now always using the AIM-style authentication method for OSCAR connections,
even when connecting to ICQ. This solves login issues some people were having.
(If you have problems, try changing the old_icq_auth setting.) - Twitter:
- Allow changing the Twitter API base URL so the module can also be used for
identi.ca or any other compatible network. - Fetch the full list of Twitter
contacts instead of slowly adding all contacts as they post a message. -
Fixed message length counting. - Allow following/unfollowing people using
the usual add/remove commands. - Better error reporting. - Added a
user_agent setting to the Jabber module to get around artificial client
restrictions. - Allow nick changes (although only before register/identify).
- Some more minor bugfixes/etc.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Robert Scheck <robert(a)fedoraproject.org> 1.2.8-1
- Upgrade to 1.2.8
--------------------------------------------------------------------------------
================================================================================
cnucnu-0-0.4.20100704git0fe054e7.fc13 (FEDORA-2010-10735)
Upstream release monitoring with bug reporting
--------------------------------------------------------------------------------
Update Information:
With this new snapshot, all aliases mentioned on
https://fedoraproject.org/wiki/Upstream_Release_Monitoring will work in the
shell mode.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Till Maas <opensource(a)till.name> - 0-0.4.20100704git0fe054e7
- Update to a recent snapshot to support the current regex/URL aliases in --shell
- Use fedpkg-vcs to easily update to a new snapshot
--------------------------------------------------------------------------------
================================================================================
cryptsetup-luks-1.1.3-1.fc13 (FEDORA-2010-8664)
A utility for setting up encrypted filesystems
--------------------------------------------------------------------------------
Update Information:
For pam_mount: Notes: - see doc/bugs.txt for cryptsetup behavior that impacts
pam_mount users since version 2.0 Fixes: - umount.crypt: fix use of a wrong
field for smtab/cmtab staleness check - umount.crypt had erroneously mounted
instead of umounted - mount.crypt: fix memory scribble crash when crypto device
could not be initialized - mount.crypt: do not fail when unlocking key slot
other than #0 - fusermount is now called with supplementary groups initialized
- rdconf: do not warn about missing fskeyhash when no fskey specified - mount:
prefer sysv mount API over bsd - pmt-ehd: reword help text for -k option -
pmt-ehd: apply default value for -k option - pmt-ehd: fix fskey generation
which was pegged at 256 bits - pmt-ehd: avoid needless
overtruncation/sparsifying - pmt-ehd: zero LUKS header to avoid setup failure
of PLAIN volume Changes: - pmt-ehd: speed up writing random data - pmt-ehd:
reword help text for -k option - mount.crypt: ignore cmtab update errors -
mount.crypt: add support for keyfile passthru using -ofsk_cipher=none - doc:
document mount.crypt's -o hash option - mount.crypt: warn on ignored options
Fixes: - config: rdconf1 static data had unclosed %(if) tags - config: rdconf1
static data had extraneous %(OPTIONS) parameter Changes: - mount.crypt: make
use of libcryptsetup - cmtab is now stored below localstatedir (usually
/var/run) - use HXformat2. This invalidates old constructs like
%(before=\"-o\"...), which need to be replaced with the new syntax. (See
below.) In general, the old syntax was only used by commands Note to
updaters: As the old syntax %(after=...) %(before=...) %(ifempty=...)
%(ifnempty=...) %(lower=...) %(upper=...) only appeared in commands, and
commands are not part of the default config file anymore since v1.0~15^2~15,
there should be little worry. The configuration options in question are
<cifsmount>, <cryptmount>, <cryptumount>, <fd0ssh>, <fsck>, <fusemount>,
<fuseumount>, <lclmount>, <nfsmount>, <ncpmount>, <ncpumount>, <pmvarrun>,
<smbmount>, <smbumount> <umount> and should normally not be needed in
pam_mount.conf.xml. Changes: - cope better with cryptsetup's assumption that
keysize=256 - augment doc/bugs.txt about caveats with cryptsetup create
Fixes: - avoid a mlock(NULL) when there is no auth token Changes: - print
error code when mkmountpoint failed - print warning when cmtab is not creatable
Changes: - update for libHX 3.4 Fixes: - do decrease the login refcount on
logout when no volumes are defined Fixes: - avoid multi-free of auth token
when pam_mount is rerun in a PAM stack - avoid NULL dereference when there is
an empty line in mtab For cryptsetup: - Fix device alignment ioctl calls
parameters. - Fix activate_by_* API calls to handle NULL device name as
documented. - Fix luksFormat/luksOpen reading passphrase from stdin and "-"
keyfile. - Support --key-file/-d option for luksFormat. - Fix description of
--key-file and add --verbose and --debug options to man page. - Add verbose log
level and move unlocking message there. - Remove device even if underlying
device disappeared. - Fix (deprecated) reload device command to accept new
device argument. - Fix luksClose operation for stacked DM devices. - Fix
automatic dm-crypt module loading. - Escape hyphens in man page. - Try to use
pkgconfig for device mapper library. - Detect old dm-crypt module and disable
LUKS suspend/resume. - Fix apitest to work on older systems. - Allow no hash
specification in plain device constructor. - Fix luksOpen reading of passphrase
on stdin (if "-" keyfile specified). - Fix isLuks to initialise crypto backend
(blkid instead is suggested anyway). - Fix package config to use proper package
version. - Avoid class C++ keyword in library header. - Detect and use
devmapper udev support if available (disable by --disable-udev). - Prefer some
device paths in status display. - Support device topology detectionfor data
alignment. - Do not verify unlocking passphrase in luksAddKey command. -
Properly initialise crypto backend in header backup/restore commands. - Fix
udev support for old libdevmapper with not compatible definition.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.3-1
- Update to cryptsetup 1.1.3
* Mon Jun 7 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.2-2
- Fix alignment ioctl use.
- Fix API activation calls to handle NULL device name.
* Sun May 30 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.2-1
- Update to cryptsetup 1.1.2
- Fix luksOpen handling of new line char on stdin.
* Sun May 23 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.1-1
- Update to cryptsetup 1.1.1
- Fix luksClose for stacked LUKS/LVM devices.
* Mon May 3 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.1-0.2
- Update to cryptsetup 1.1.1-rc2.
* Sat May 1 2010 Milan Broz <mbroz(a)redhat.com> - 1.1.1-0.1
- Update to cryptsetup 1.1.1-rc1.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #608400 - pam_mount-2.4 is available
https://bugzilla.redhat.com/show_bug.cgi?id=608400
[ 2 ] Bug #599609 - use mount -t crypt instead of mount.crypt for pam_mount crypt volumes for selinux support
https://bugzilla.redhat.com/show_bug.cgi?id=599609
[ 3 ] Bug #610885 - update cryptsetup-luks to 1.1.2 for pam_mount
https://bugzilla.redhat.com/show_bug.cgi?id=610885
[ 4 ] Bug #570315 - pmt-ehd has problems has problems creating large loopback containers
https://bugzilla.redhat.com/show_bug.cgi?id=570315
--------------------------------------------------------------------------------
================================================================================
django-flash-1.7.2-2.fc13 (FEDORA-2010-10730)
A Django extension to provide support for Rails-like flash
--------------------------------------------------------------------------------
Update Information:
This update brings the latest release of Typepad Motion to Fedora.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jul 1 2010 Sebastian Dziallas <sebastian(a)when.com> - 1.7.2-2
- use renamed readme file
* Thu Jul 1 2010 Sebastian Dziallas <sebastian(a)when.com> - 1.7.2-1
- new upstream release
--------------------------------------------------------------------------------
================================================================================
django-typepad-1.1.3-1.fc13 (FEDORA-2010-10730)
A helper Django app for making TypePad applications
--------------------------------------------------------------------------------
Update Information:
This update brings the latest release of Typepad Motion to Fedora.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Sebastian Dziallas <sebastian(a)when.com> - 1.1.3-1
- new upstream release
--------------------------------------------------------------------------------
================================================================================
dot2tex-2.8.7-3.fc13 (FEDORA-2010-10849)
A Graphviz to LaTeX converter
--------------------------------------------------------------------------------
Update Information:
Upgarde to 2.8.7
--------------------------------------------------------------------------------
ChangeLog:
* Fri May 7 2010 Jim Radford <radford(a)blackbean.org> - 2.8.7-3
- upgrade to 2.8.7
--------------------------------------------------------------------------------
================================================================================
e2fsprogs-1.41.10-7.fc13 (FEDORA-2010-10748)
Utilities for managing ext2, ext3, and ext4 filesystems
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Eric Sandeen <sandeen(a)redhat.com> 1.41.10-7
- e2fsck: Skip time-based checks if the time looks insane (#577126)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #577126 - Mount time check at boot makes system too fragile, and is not handled well
https://bugzilla.redhat.com/show_bug.cgi?id=577126
--------------------------------------------------------------------------------
================================================================================
eject-2.1.5-19.fc13 (FEDORA-2010-10826)
A program that ejects removable media using software control
--------------------------------------------------------------------------------
Update Information:
handle multi-partition devices with spaces in mount points properly
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Kamil Dudka <kdudka(a)redhat.com> 2.1.5-19
- handle multi-partition devices with spaces in mount points properly (#608502)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #608502 - Fails to unmount phone card accessed via USB due to space in mount point
https://bugzilla.redhat.com/show_bug.cgi?id=608502
--------------------------------------------------------------------------------
================================================================================
ember-0.5.6-5.fc13 (FEDORA-2010-10802)
3D client for WorldForge
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Michel Salim <salimma(a)fedoraproject.org> - 0.5.6-5
- Fix implicit DSO bug (#565162)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #565162 - FTBFS ember-0.5.6-4.fc13: ImplicitDSOLinking
https://bugzilla.redhat.com/show_bug.cgi?id=565162
--------------------------------------------------------------------------------
================================================================================
eric-4.4.6-1.fc13 (FEDORA-2010-10789)
Python IDE
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Johan Cwiklinski <johan AT x-tnd DOT be> 4.4.6-1
- 4.4.6
--------------------------------------------------------------------------------
================================================================================
garmindev-0.3.4-1.fc13 (FEDORA-2010-10813)
Drivers for communication with Garmin GPS devices
--------------------------------------------------------------------------------
Update Information:
updated top 0.3.4 with these changes: - fix screenshot rotation for 60SCx -
add driver for Forerunner 305
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Dan Horák <dan[at]danny.cz> 0.3.4-1
- update to version 0.3.4
--------------------------------------------------------------------------------
================================================================================
git-1.7.1.1-1.fc13 (FEDORA-2010-10820)
Fast Version Control System
--------------------------------------------------------------------------------
Update Information:
Update to 1.7.1.1 maintenance release. Git 1.7.1 fixes a number of bugs and
various improvements all around. For the full list, see the upstream release
notes: http://www.kernel.org/pub/software/scm/git/docs/RelNotes-1.7.1.txt
The release notes for 1.7.0 are also worth a read when updating from 1.6.6, as
there are a few changes in default behaviors and a number of new features that
are helpful to know about.
http://www.kernel.org/pub/software/scm/git/docs/RelNotes-1.7.0.txt This
update also brings the git packaging into line with the guidelines for emacs
add-ons. If you use emacs together with git, testing the emacs-git and emacs-
git-el packages would be much appreciated. Thanks to Jonathan Underwood.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Adam Tkac <atkac redhat com> - 1.7.1.1-1
- update to 1.7.1.1
--------------------------------------------------------------------------------
================================================================================
gnome-applet-alarm-clock-0.3.1-1.fc13 (FEDORA-2010-10782)
Alarm clock for the GNOME panel
--------------------------------------------------------------------------------
Update Information:
This update fixes the 'Repeat' function and the option to start an application
when an alarm is due. It also fixes a crash when playing an alarm sound.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Christoph Wickert <cwickert(a)fedoraproject.org> - 0.3.1-1
- Update to 0.3.1 (fixes #597043)
- Switch to new GConf scriptlet macros
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #597043 - Repeat and start application options do not work
https://bugzilla.redhat.com/show_bug.cgi?id=597043
[ 2 ] Bug #597562 - [abrt] crash in gnome-applet-alarm-clock-0.3.0-1.fc12: raise: Process /usr/bin/alarm-clock-applet was killed by signal 6 (SIGABRT)
https://bugzilla.redhat.com/show_bug.cgi?id=597562
[ 3 ] Bug #606488 - [abrt] crash in gnome-applet-alarm-clock-0.3.0-1.fc13: media_player_start: Process /usr/bin/alarm-clock-applet was killed by signal 11 (SIGSEGV)
https://bugzilla.redhat.com/show_bug.cgi?id=606488
[ 4 ] Bug #611278 - Update alarm clock
https://bugzilla.redhat.com/show_bug.cgi?id=611278
--------------------------------------------------------------------------------
================================================================================
ibus-1.3.6-1.fc13 (FEDORA-2010-10717)
Intelligent Input Bus for Linux OS
--------------------------------------------------------------------------------
Update Information:
Bug 611714 - Cannot de-select Hanja lock in applet menu
--------------------------------------------------------------------------------
ChangeLog:
* Tue Jul 6 2010 Takao Fujiwara <takao.fujiwara1(a)gmail.com> - 1.3.6-1
- Update to 1.3.6
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #611714 - Cannot de-select Hanja lock in applet menu
https://bugzilla.redhat.com/show_bug.cgi?id=611714
--------------------------------------------------------------------------------
================================================================================
jokosher-1.0-0.12.20100703bzr.fc13 (FEDORA-2010-10835)
A simple and easy-to-use Open Source multi-track editor
--------------------------------------------------------------------------------
Update Information:
Update to latest bzr checkout
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Christopher Brown <snecklifter(a)gmail.com> - 1.0-0.12.20100703bzr
- Update to latest bzr checkout
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #604129 - [abrt] crash in jokosher-1.0-0.12.20100503bzr.fc13: VUWidget.py:324:OnDraw:TypeError: Required argument 'cr' (pos 1) not found
https://bugzilla.redhat.com/show_bug.cgi?id=604129
[ 2 ] Bug #593509 - [abrt] crash in jokosher-1.0-0.12.20100503bzr.fc12: Event.py:1189:__UpdateFadeLevels:ZeroDivisionError: float division
https://bugzilla.redhat.com/show_bug.cgi?id=593509
--------------------------------------------------------------------------------
================================================================================
kcbench-0.3-6.fc13 (FEDORA-2010-10725)
Kernel compile benchmark
--------------------------------------------------------------------------------
Update Information:
A few small improvements: * a few output format adjustments * fix cleaning
up buildir * create compiledir properly if specified manually * fix two
typos -- one fixes #565325 * use type (bash build in) instead of which Fix
two typos -- one fixes Bug #565325 (kcbench ignores '-c' switch) A few small
improvements: - a few output format adjustments - fix cleaning up buildir -
create compiledir properly if specified manually - fix two typos -- one fixes
#565325
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Thorsten Leemhuis <fedora [AT] leemhuis [DOT] info> - 0.3-6
- use type (bash built in) instead of which to check if all tools are available
* Mon May 24 2010 Thorsten Leemhuis <fedora [AT] leemhuis [DOT] info> - 0.3-5
- a few small adjutments
-- a few output format adjustments
-- fix cleaning up buildir
-- create compiledir properly if specified manually
* Sat Apr 24 2010 Thorsten Leemhuis <fedora [AT] leemhuis [DOT] info> - 0.3-4.1
- fix two typos -- one fixes #565325
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #565325 - kcbench ignores '-c' switch
https://bugzilla.redhat.com/show_bug.cgi?id=565325
--------------------------------------------------------------------------------
================================================================================
konversation-1.3.1-1.fc13 (FEDORA-2010-10747)
A user friendly IRC client
--------------------------------------------------------------------------------
Update Information:
This update includes: * A major new feature in the area of Direct-Client-to-
Client (DCC) support: An implementation of the DCC Whiteboard extension that
brings collaborative drawing to IRC. * Behavorial mprovements in the handling
of aborting automatic reconnection attempts after connection failure and RFC
1459 PING/PONG exchanges. * Integration with KDE's SSL certificate store the
KDE 3 version enjoyed * Interface tweaks, new keyboard shortcuts and many
bugfixes.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jul 1 2010 Rex Dieter <rdieter(a)fedoraproject.org> - 1.3.1-1
- konversation-1.3.1
* Tue Jun 8 2010 Rex Dieter <rdieter(a)fedoraproject.org> - 1.3-1
- konversation-1.3
* Sat May 22 2010 Rex Dieter <rdieter(a)fedoraproject.org> - 1.3-0.1.beta1
- konversation-1.3-beta1
* Mon May 10 2010 Rex Dieter <rdieter(a)fedoraproject.org> - 1.2.3-2.20100510
- 20100510 snapshot
--------------------------------------------------------------------------------
================================================================================
libHX-3.4-1.fc13 (FEDORA-2010-8664)
General-purpose library for typical low-level operations
--------------------------------------------------------------------------------
Update Information:
For pam_mount: Notes: - see doc/bugs.txt for cryptsetup behavior that impacts
pam_mount users since version 2.0 Fixes: - umount.crypt: fix use of a wrong
field for smtab/cmtab staleness check - umount.crypt had erroneously mounted
instead of umounted - mount.crypt: fix memory scribble crash when crypto device
could not be initialized - mount.crypt: do not fail when unlocking key slot
other than #0 - fusermount is now called with supplementary groups initialized
- rdconf: do not warn about missing fskeyhash when no fskey specified - mount:
prefer sysv mount API over bsd - pmt-ehd: reword help text for -k option -
pmt-ehd: apply default value for -k option - pmt-ehd: fix fskey generation
which was pegged at 256 bits - pmt-ehd: avoid needless
overtruncation/sparsifying - pmt-ehd: zero LUKS header to avoid setup failure
of PLAIN volume Changes: - pmt-ehd: speed up writing random data - pmt-ehd:
reword help text for -k option - mount.crypt: ignore cmtab update errors -
mount.crypt: add support for keyfile passthru using -ofsk_cipher=none - doc:
document mount.crypt's -o hash option - mount.crypt: warn on ignored options
Fixes: - config: rdconf1 static data had unclosed %(if) tags - config: rdconf1
static data had extraneous %(OPTIONS) parameter Changes: - mount.crypt: make
use of libcryptsetup - cmtab is now stored below localstatedir (usually
/var/run) - use HXformat2. This invalidates old constructs like
%(before=\"-o\"...), which need to be replaced with the new syntax. (See
below.) In general, the old syntax was only used by commands Note to
updaters: As the old syntax %(after=...) %(before=...) %(ifempty=...)
%(ifnempty=...) %(lower=...) %(upper=...) only appeared in commands, and
commands are not part of the default config file anymore since v1.0~15^2~15,
there should be little worry. The configuration options in question are
<cifsmount>, <cryptmount>, <cryptumount>, <fd0ssh>, <fsck>, <fusemount>,
<fuseumount>, <lclmount>, <nfsmount>, <ncpmount>, <ncpumount>, <pmvarrun>,
<smbmount>, <smbumount> <umount> and should normally not be needed in
pam_mount.conf.xml. Changes: - cope better with cryptsetup's assumption that
keysize=256 - augment doc/bugs.txt about caveats with cryptsetup create
Fixes: - avoid a mlock(NULL) when there is no auth token Changes: - print
error code when mkmountpoint failed - print warning when cmtab is not creatable
Changes: - update for libHX 3.4 Fixes: - do decrease the login refcount on
logout when no volumes are defined Fixes: - avoid multi-free of auth token
when pam_mount is rerun in a PAM stack - avoid NULL dereference when there is
an empty line in mtab For cryptsetup: - Fix device alignment ioctl calls
parameters. - Fix activate_by_* API calls to handle NULL device name as
documented. - Fix luksFormat/luksOpen reading passphrase from stdin and "-"
keyfile. - Support --key-file/-d option for luksFormat. - Fix description of
--key-file and add --verbose and --debug options to man page. - Add verbose log
level and move unlocking message there. - Remove device even if underlying
device disappeared. - Fix (deprecated) reload device command to accept new
device argument. - Fix luksClose operation for stacked DM devices. - Fix
automatic dm-crypt module loading. - Escape hyphens in man page. - Try to use
pkgconfig for device mapper library. - Detect old dm-crypt module and disable
LUKS suspend/resume. - Fix apitest to work on older systems. - Allow no hash
specification in plain device constructor. - Fix luksOpen reading of passphrase
on stdin (if "-" keyfile specified). - Fix isLuks to initialise crypto backend
(blkid instead is suggested anyway). - Fix package config to use proper package
version. - Avoid class C++ keyword in library header. - Detect and use
devmapper udev support if available (disable by --disable-udev). - Prefer some
device paths in status display. - Support device topology detectionfor data
alignment. - Do not verify unlocking passphrase in luksAddKey command. -
Properly initialise crypto backend in header backup/restore commands. - Fix
udev support for old libdevmapper with not compatible definition.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 16 2010 Till Maas <opensource(a)till.name> - 3.4-1
- Update to new release
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #608400 - pam_mount-2.4 is available
https://bugzilla.redhat.com/show_bug.cgi?id=608400
[ 2 ] Bug #599609 - use mount -t crypt instead of mount.crypt for pam_mount crypt volumes for selinux support
https://bugzilla.redhat.com/show_bug.cgi?id=599609
[ 3 ] Bug #610885 - update cryptsetup-luks to 1.1.2 for pam_mount
https://bugzilla.redhat.com/show_bug.cgi?id=610885
[ 4 ] Bug #570315 - pmt-ehd has problems has problems creating large loopback containers
https://bugzilla.redhat.com/show_bug.cgi?id=570315
--------------------------------------------------------------------------------
================================================================================
libchamplain-0.4.6-1.fc13 (FEDORA-2010-10760)
Map view for Clutter
--------------------------------------------------------------------------------
Update Information:
Update to 0.4.6 stable release. Enable python and vala language bindings.
--------------------------------------------------------------------------------
ChangeLog:
* Tue Jul 6 2010 Peter Robinson <pbrobinson(a)gmail.com> - 0.4.6-1
- Version bump to 0.4.6. Enable vala and python bindings.
http://ftp.gnome.org/pub/GNOME/sources/libchamplain/0.4/libchamplain-0.4....
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #604930 - Disabled Python bindings make baby Jesus cry
https://bugzilla.redhat.com/show_bug.cgi?id=604930
[ 2 ] Bug #607997 - Update libchamplain to 0.4.6
https://bugzilla.redhat.com/show_bug.cgi?id=607997
--------------------------------------------------------------------------------
================================================================================
libfishsound-1.0.0-2.fc13 (FEDORA-2010-10759)
Simple programming interface for Xiph.Org codecs
--------------------------------------------------------------------------------
Update Information:
Upstream bugfix/security release; see
http://tinyurl.com/fishsound-1-0-0-relnotes Also fixes a pkg-config bug that
erroneously pulls in the packages that libfishsound wrap
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Michel Salim <salimma(a)fedoraproject.org> - 1.0.0-2
- No longer export dependencies on vorbis, speex, flac
* Sat Jun 12 2010 Michel Salim <salimma(a)fedoraproject.org> - 1.0.0-1
- Update to 1.0.0
--------------------------------------------------------------------------------
================================================================================
libisofs-0.6.34-1.fc13 (FEDORA-2010-10780)
Library to create ISO 9660 disk images
--------------------------------------------------------------------------------
Update Information:
This release provides some features for the next release of libisoburn/xorriso.
Changes towards previous version 0.6.32: * New API call
iso_image_set_boot_catalog_hidden() * New API call iso_node_get_hidden() *
New IsoHideNodeFlag bit LIBISO_HIDE_BUT_WRITE * New error code
ISO_BOOT_NO_CATALOG * Opportunity to reduce compile line lengths by including
"config.h"
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Robert Scheck <robert(a)fedoraproject.org> 0.6.34-1
- Upgrade to 0.6.34
--------------------------------------------------------------------------------
================================================================================
liblinebreak-2.0-1.fc13 (FEDORA-2010-10837)
A Unicode line-breaking library
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Michel Salim <salimma(a)fedoraproject.org> - 2.0-1
- Update to 2.0
--------------------------------------------------------------------------------
================================================================================
libmicrohttpd-0.4.6-1.fc13 (FEDORA-2010-10824)
Lightweight library for embedding a webserver in applications
--------------------------------------------------------------------------------
Update Information:
Update to 0.4.6 The ChangeLog can be found at
https://ng.gnunet.org/svn/libmicrohttpd/ChangeLog
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jun 4 2010 Erik van Pienbroek <epienbro(a)fedoraproject.org> - 0.4.6-1
- Update to 0.4.6
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #593617 - libmicrohttpd-0.4.6 is available
https://bugzilla.redhat.com/show_bug.cgi?id=593617
--------------------------------------------------------------------------------
================================================================================
libpng10-1.0.54-1.fc13 (FEDORA-2010-10823)
Old version of libpng, needed to run old binaries
--------------------------------------------------------------------------------
Update Information:
This update addresses two security issues: * CVE-2010-1205, in which a buffer
overflow might allow remote attackers to execute arbitrary code via a PNG image
that triggers an additional data row. * CVE-2010-2249, in which a memory leak
allows remote attackers to cause a denial of service (memory consumption and
application crash) via a PNG image containing malformed Physical Scale (aka
sCAL) chunks.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Paul Howarth <paul(a)city-fan.org> 1.0.54-1
- update to 1.0.54
- fixes CVE-2010-1205 (out-of-bounds write to memory)
- fixes CVE-2010-2249 (memory leak with images having malformed sCAL chunks)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #608238 - CVE-2010-1205 libpng: out-of-bounds memory write
https://bugzilla.redhat.com/show_bug.cgi?id=608238
[ 2 ] Bug #608644 - CVE-2010-2249 libpng: Memory leak when processing Physical Scale (sCAL) images
https://bugzilla.redhat.com/show_bug.cgi?id=608644
--------------------------------------------------------------------------------
================================================================================
lshell-0.9.12-2.fc13 (FEDORA-2010-10738)
Python-based limited Shell
--------------------------------------------------------------------------------
Update Information:
lshell provides a limited shell configured per user. The configuration is done
quite simply using a configuration file.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #549296 - Review Request: lshell - Python-based limited Shell
https://bugzilla.redhat.com/show_bug.cgi?id=549296
--------------------------------------------------------------------------------
================================================================================
lxpolkit-0.1.0-0.1.20100402git5087383.fc13 (FEDORA-2010-10731)
Simple PolicyKit authentication agent
--------------------------------------------------------------------------------
Update Information:
LXPolKit is a simple PolicyKit authentication agent developed for LXDE, the
Lightweight X11 Desktop Environment.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #579171 - Review Request: lxpolkit - Simple PolicyKit authentication agent
https://bugzilla.redhat.com/show_bug.cgi?id=579171
--------------------------------------------------------------------------------
================================================================================
lxterminal-0.1.7-2.fc13 (FEDORA-2010-10827)
Desktop-independent VTE-based terminal emulator
--------------------------------------------------------------------------------
Update Information:
This update enables true transparency for the background. The major code rewrite
fixes some crashes.
--------------------------------------------------------------------------------
ChangeLog:
* Thu May 27 2010 Christoph Wickert <cwickert(a)fedoraproject.org> - 0.1.7-2
- Major code rework from git (fixes #571591 and 596358)
* Wed Mar 3 2010 Christoph Wickert <cwickert(a)fedoraproject.org> - 0.1.7-1
- Update to 0.1.7
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #596358 - [abrt] crash in lxterminal-0.1.6-3.fc13: Process /usr/bin/lxterminal was killed by signal 11 (SIGSEGV)
https://bugzilla.redhat.com/show_bug.cgi?id=596358
--------------------------------------------------------------------------------
================================================================================
mailcap-2.1.33-1.fc13 (FEDORA-2010-10792)
Helper application and MIME type associations for file types
--------------------------------------------------------------------------------
Update Information:
Update to include many MIME types recently added to the IANA registry, as well
as WebM, JavaFX video, and XML related additions.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Ville Skyttä <ville.skytta(a)iki.fi> - 2.1.33-1
- Update to 2.1.33, fixes #604924.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #604924 - Add video/webm with extension webm to mime.types
https://bugzilla.redhat.com/show_bug.cgi?id=604924
--------------------------------------------------------------------------------
================================================================================
maildrop-2.5.0-13.fc13 (FEDORA-2010-10807)
Mail delivery agent with filtering abilities
--------------------------------------------------------------------------------
Update Information:
This updates fixes an incompatibility with qmail-scanner. It also updates
maildrop to 2.5.0.
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Axel Thimm <Axel.Thimm(a)ATrpms.net> - 2.5.0-13
- Update to 2.5.0.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #569653 - update to 2.4.0 breaks qmail-scanner-1.25-st-qms
https://bugzilla.redhat.com/show_bug.cgi?id=569653
--------------------------------------------------------------------------------
================================================================================
mercurial-1.6-3.fc13 (FEDORA-2010-10799)
A fast, lightweight distributed source control management system
--------------------------------------------------------------------------------
Update Information:
see http://mercurial.selenic.com/wiki/WhatsNew see
http://mercurial.selenic.com/wiki/WhatsNew
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Neal Becker <ndbecker2(a)gmail.com> - 1.6-2
- Remove hg-viz, git-rev-tree
* Sun Jul 4 2010 Neal Becker <ndbecker2(a)gmail.com> - 1.6-1
- Update to 1.6
- git-viz is removed
* Fri Jun 25 2010 Neal Becker <ndbecker2(a)gmail.com> - 1.5.4-1
- Don't install mercurial-convert-repo (use hg convert instead)
* Wed Jun 2 2010 Neal Becker <ndbecker2(a)gmail.com> - 1.5.4-1
- Update to 1.5.4
--------------------------------------------------------------------------------
================================================================================
mingw32-gtk2-2.20.1-2.fc13 (FEDORA-2010-10795)
MinGW Windows Gtk2 library
--------------------------------------------------------------------------------
Update Information:
Re-enabled the WIMP theme Update to the latest stable version, 2.20.1 The
complete list of changes can be found at
ftp://ftp.gnome.org/pub/gnome/sources/gtk+/2.20/gtk+-2.20.1.news
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Erik van Pienbroek <epienbro(a)fedoraproject.org> - 2.20.1-2
- Re-enable the WIMP theme now that upstream has provided a fix for it (RHBZ #608911, GNOME BZ #598299)
* Fri Jun 11 2010 Erik van Pienbroek <epienbro(a)fedoraproject.org> - 2.20.1-1
- Update to 2.20.1
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #608911 - Libwimp fix available
https://bugzilla.redhat.com/show_bug.cgi?id=608911
--------------------------------------------------------------------------------
================================================================================
mingw32-libpng-1.2.44-1.fc13 (FEDORA-2010-10793)
MinGW Windows Libpng library
--------------------------------------------------------------------------------
Update Information:
- Update to 1.2.44 - Fixes CVE-2010-1205 and CVE-2010-2249
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Erik van Pienbroek <epienbro(a)fedoraproject.org> - 1.2.44-1
- Update to 1.2.44
- Fixes CVE-2010-1205 and CVE-2010-2249 (RHBZ #608644 and #608238)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #608644 - CVE-2010-2249 libpng: Memory leak when processing Physical Scale (sCAL) images
https://bugzilla.redhat.com/show_bug.cgi?id=608644
[ 2 ] Bug #608238 - CVE-2010-1205 libpng: out-of-bounds memory write
https://bugzilla.redhat.com/show_bug.cgi?id=608238
--------------------------------------------------------------------------------
================================================================================
monit-5.1.1-1.fc13 (FEDORA-2010-10805)
Manages and monitors processes, files, directories and devices
--------------------------------------------------------------------------------
Update Information:
Version bump to 5.1.1 and minor specfile changes
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Maxim Burgerhout <wzzrd(a)fedoraproject.org> - 5.1.1-1
- Version bump to 5.1.1 (needed new version of monit-no-startup-msg.patch)
- Ghosted the logfile
--------------------------------------------------------------------------------
================================================================================
monotone-0.48-1.fc13 (FEDORA-2010-10766)
A free, distributed version control system
--------------------------------------------------------------------------------
Update Information:
This release comes with dozens of bug fixes - a fall-out of joint efforts during
a bug hunt fest earlier this year - and some interesting new features, such as
an improved changelog editing view and new database management features.
Please check as always the NEWS file [0] for a detailed list of changes and
improvements. [0] http://monotone.ca/NEWS
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jun 14 2010 Thomas Moschny <thomas.moschny(a)gmx.de> - 0.48-1
- Update to 0.48.
--------------------------------------------------------------------------------
================================================================================
mpop-1.0.21-1.fc13 (FEDORA-2010-10806)
POP3 client for recieving mail from POP3 mailboxes
--------------------------------------------------------------------------------
Update Information:
* Sat Jul 03 2010 Fabian Affolter <fabian(a)bernewireless.net> - 1.0.21-1 -
Updated to new upstream version 1.0.21
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Fabian Affolter <fabian(a)bernewireless.net> - 1.0.21-1
- Updated to new upstream version 1.0.21
--------------------------------------------------------------------------------
================================================================================
octave-forge-20090607-17.fc13 (FEDORA-2010-10727)
Contributed functions for octave
--------------------------------------------------------------------------------
Update Information:
Workaround broken 'ann' and 'java' packages by disabling autoloading. This
should fix problems with crashes when running "clear -all" and other commands,
as well as when quitting.
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Alex Lancaster <alexlan[AT]fedoraproject org> - 20090607-17
- Update java patch to disable autoloading of java package
currently this package leads to crashing on exit (#562276)
* Sat Jun 19 2010 Alex Lancaster <alexlan[AT]fedoraproject org> - 20090607-16
- Adapt two patches from Debian to disable autoloading of 'ann' package:
http://patch-tracker.debian.org/patch/series/view/octave-ann/1.0.2+dfsg-2...
http://patch-tracker.debian.org/patch/series/view/octave-ann/1.0.2+dfsg-2...
'ann' currently causes crashes even if not being used.
Should workaround #562276 until upstream fixes the 'ann' package
properly.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #562276 - octave segfaults on a startup from qtoctave
https://bugzilla.redhat.com/show_bug.cgi?id=562276
--------------------------------------------------------------------------------
================================================================================
pam_mount-2.4-2.fc13 (FEDORA-2010-8664)
A PAM module that can mount volumes for a user session
--------------------------------------------------------------------------------
Update Information:
For pam_mount: Notes: - see doc/bugs.txt for cryptsetup behavior that impacts
pam_mount users since version 2.0 Fixes: - umount.crypt: fix use of a wrong
field for smtab/cmtab staleness check - umount.crypt had erroneously mounted
instead of umounted - mount.crypt: fix memory scribble crash when crypto device
could not be initialized - mount.crypt: do not fail when unlocking key slot
other than #0 - fusermount is now called with supplementary groups initialized
- rdconf: do not warn about missing fskeyhash when no fskey specified - mount:
prefer sysv mount API over bsd - pmt-ehd: reword help text for -k option -
pmt-ehd: apply default value for -k option - pmt-ehd: fix fskey generation
which was pegged at 256 bits - pmt-ehd: avoid needless
overtruncation/sparsifying - pmt-ehd: zero LUKS header to avoid setup failure
of PLAIN volume Changes: - pmt-ehd: speed up writing random data - pmt-ehd:
reword help text for -k option - mount.crypt: ignore cmtab update errors -
mount.crypt: add support for keyfile passthru using -ofsk_cipher=none - doc:
document mount.crypt's -o hash option - mount.crypt: warn on ignored options
Fixes: - config: rdconf1 static data had unclosed %(if) tags - config: rdconf1
static data had extraneous %(OPTIONS) parameter Changes: - mount.crypt: make
use of libcryptsetup - cmtab is now stored below localstatedir (usually
/var/run) - use HXformat2. This invalidates old constructs like
%(before=\"-o\"...), which need to be replaced with the new syntax. (See
below.) In general, the old syntax was only used by commands Note to
updaters: As the old syntax %(after=...) %(before=...) %(ifempty=...)
%(ifnempty=...) %(lower=...) %(upper=...) only appeared in commands, and
commands are not part of the default config file anymore since v1.0~15^2~15,
there should be little worry. The configuration options in question are
<cifsmount>, <cryptmount>, <cryptumount>, <fd0ssh>, <fsck>, <fusemount>,
<fuseumount>, <lclmount>, <nfsmount>, <ncpmount>, <ncpumount>, <pmvarrun>,
<smbmount>, <smbumount> <umount> and should normally not be needed in
pam_mount.conf.xml. Changes: - cope better with cryptsetup's assumption that
keysize=256 - augment doc/bugs.txt about caveats with cryptsetup create
Fixes: - avoid a mlock(NULL) when there is no auth token Changes: - print
error code when mkmountpoint failed - print warning when cmtab is not creatable
Changes: - update for libHX 3.4 Fixes: - do decrease the login refcount on
logout when no volumes are defined Fixes: - avoid multi-free of auth token
when pam_mount is rerun in a PAM stack - avoid NULL dereference when there is
an empty line in mtab For cryptsetup: - Fix device alignment ioctl calls
parameters. - Fix activate_by_* API calls to handle NULL device name as
documented. - Fix luksFormat/luksOpen reading passphrase from stdin and "-"
keyfile. - Support --key-file/-d option for luksFormat. - Fix description of
--key-file and add --verbose and --debug options to man page. - Add verbose log
level and move unlocking message there. - Remove device even if underlying
device disappeared. - Fix (deprecated) reload device command to accept new
device argument. - Fix luksClose operation for stacked DM devices. - Fix
automatic dm-crypt module loading. - Escape hyphens in man page. - Try to use
pkgconfig for device mapper library. - Detect old dm-crypt module and disable
LUKS suspend/resume. - Fix apitest to work on older systems. - Allow no hash
specification in plain device constructor. - Fix luksOpen reading of passphrase
on stdin (if "-" keyfile specified). - Fix isLuks to initialise crypto backend
(blkid instead is suggested anyway). - Fix package config to use proper package
version. - Avoid class C++ keyword in library header. - Detect and use
devmapper udev support if available (disable by --disable-udev). - Prefer some
device paths in status display. - Support device topology detectionfor data
alignment. - Do not verify unlocking passphrase in luksAddKey command. -
Properly initialise crypto backend in header backup/restore commands. - Fix
udev support for old libdevmapper with not compatible definition.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Till Maas <opensource(a)till.name> - 2.4-2
- Add cryptsetup-luks-libs Requires
- list all manpages explicitly
* Fri Jul 2 2010 Till Maas <opensource(a)till.name> - 2.4-1
- Update to new release
- add patch to keep cmtab at /etc
- add patch to use mount -t crypt instead of mount.crypt for crypto volumes
- BR cryptsetup-luks-devel >= 1.1.2
- add man-db BR for Fedora >= 14 for pam_mount.8 to pam_mount.txt conversion
- add Patch to remove man-db BR for Fedora < 14
* Wed May 19 2010 Till Maas <opensource(a)till.name> - 2.3-1
- Update to new release
* Sun May 16 2010 Till Maas <opensource(a)till.name> - 2.2-1
- Update to new release
* Sun May 16 2010 Till Maas <opensource(a)till.name> - 2.1-1
- Update to new release
- Add BuildRequires: cryptsetup-luks-devel
- Cleanup BRs
- Add Requires: /bin/readlink
- Update libHX dependency
* Mon Jan 4 2010 Till Maas <opensource(a)till.name> - 1.32-2
- Do not package compatibility symlinks anymore
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #608400 - pam_mount-2.4 is available
https://bugzilla.redhat.com/show_bug.cgi?id=608400
[ 2 ] Bug #599609 - use mount -t crypt instead of mount.crypt for pam_mount crypt volumes for selinux support
https://bugzilla.redhat.com/show_bug.cgi?id=599609
[ 3 ] Bug #610885 - update cryptsetup-luks to 1.1.2 for pam_mount
https://bugzilla.redhat.com/show_bug.cgi?id=610885
[ 4 ] Bug #570315 - pmt-ehd has problems has problems creating large loopback containers
https://bugzilla.redhat.com/show_bug.cgi?id=570315
--------------------------------------------------------------------------------
================================================================================
perl-Devel-PartialDump-0.13-1.fc13 (FEDORA-2010-10736)
Partial dumping of data structures, optimized for argument printing
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #611165 - Review Request: perl-Devel-PartialDump - Partial dumping of data structures, optimized for argument printing
https://bugzilla.redhat.com/show_bug.cgi?id=611165
--------------------------------------------------------------------------------
================================================================================
perl-Statistics-Descriptive-3.0200-1.fc13 (FEDORA-2010-10770)
Perl module of basic descriptive statistical functions
--------------------------------------------------------------------------------
Update Information:
This update includes several new features: * Added skewness and kurtosis *
Added the quantile method * Added ->frequency_distribution_ref() which
deprecates frequency_distribution() And some upstream bug fixes: * RT
#46026: standard_deviation failing due to a variance that got evaluated to 0 due
to rounding errors * RT #34999: freq distribution generated too many bins * RT
#9160: Variance and Standard Deviation use costly pseudo-variance, instead of
computing real variance
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Iain Arnell <iarnell(a)gmail.com> 3.0200-1
- update to latest upstream version.
--------------------------------------------------------------------------------
================================================================================
perl-Test-Smoke-1.43-1.fc13 (FEDORA-2010-10796)
Perl core test smoke suite
--------------------------------------------------------------------------------
Update Information:
http://search.cpan.org/~abeltje/Test-Smoke-1.43/lib/Test/Smoke.pm
--------------------------------------------------------------------------------
================================================================================
perl-Test-TempDir-0.05-3.fc13 (FEDORA-2010-10809)
Temporary files support for testing
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Emmanuel Seyman <emmanuel.seyman(a)club-internet.fr> - 0.05-3
- Add perl(File::NFSLock) to Requires (#611056)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #611056 - missing File::NFSLock dependecy
https://bugzilla.redhat.com/show_bug.cgi?id=611056
--------------------------------------------------------------------------------
================================================================================
php-eaccelerator-0.9.6.1-1.fc13 (FEDORA-2010-10781)
PHP accelerator, optimizer, encoder and dynamic content cacher
--------------------------------------------------------------------------------
Update Information:
Fix some PHP 5.3 related issues. Only minor bugs have been fixed.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Remi Collet <Fedora(a)FamilleCollet.com> - 1:0.9.6.1-1
- update to 0.9.6.1
--------------------------------------------------------------------------------
================================================================================
php-phpmd-PHP-PMD-0.2.6-1.fc13 (FEDORA-2010-10787)
PHPMD - PHP Mess Detector
--------------------------------------------------------------------------------
Update Information:
upstream 0.2.6: bugfixes
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Christof Damian <christof(a)damian.net> - 0.2.6-1
- upstream 0.2.6
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #611218 - php-phpmd-PHP-PMD-0.2.6 is available
https://bugzilla.redhat.com/show_bug.cgi?id=611218
--------------------------------------------------------------------------------
================================================================================
proftpd-1.3.3a-1.fc13 (FEDORA-2010-10801)
Flexible, stable and highly-configurable FTP server
--------------------------------------------------------------------------------
Update Information:
This is the latest upstream maintenance release.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Paul Howarth <paul(a)city-fan.org> 1.3.3a-1
- Update to 1.3.3a
- Added Japanese translation
- Many mod_sftp bugfixes
- Fixed SSL_shutdown() errors caused by OpenSSL 0.9.8m and later
- Fixed handling of utmp/utmpx format changes on FreeBSD
--------------------------------------------------------------------------------
================================================================================
publican-2.0-0.fc13 (FEDORA-2010-10758)
Common files and scripts for publishing with DocBook XML
--------------------------------------------------------------------------------
Update Information:
* Tue Jul 06 2010 Jeff Fearn <jfearn(a)redhat.com> 2.0-0 - Add Publican::Website.
- Add web_*_label params for web menus. - Add underscores to cleanset,
installbrand, and printtree. BZ #581090 - Update docs with Website content -
Update brand license text. - Fix different log jar path on F14+ - Add
constraint to help_config output. - Fix segfault when indexterm has no leading
content. BZ #592666 - Fix inline indexterm. BZ #592823 - Translate productname
tag. BZ #592669 - Fix formalpara missing ID. BZ #595564 - Add dummy lang.css
to avoid 404's. BZ #595799 - Improve validation error message. BZ #593887 -
Fix qandaentry ID. BZ #593892 - Fix Icon non-conformance. BZ #593890 - Fix
admonitions splitting across pages. BZ #596257 - Fix HTML simple list border.
BZ #599258 - Fix formal object IDs. BZ #601363 - Fix Revision History layout.
BZ #559787 #598828 #598833 - Remove title color from term in HTML. BZ #592822
- Fix highlight breaking callouts. BZ #590933 - Add support for LineColumn
coords in area tag. - Update font requires for F12 and F13. - Fix clean_ids
adding newline to verbatim. BZ #604465 - Fix index missing ID. BZ #606418 -
Fix files dir being missed. BZ #609345 - Adjust admonition layout.
--------------------------------------------------------------------------------
ChangeLog:
* Tue Jul 6 2010 Jeff Fearn <jfearn(a)redhat.com> 2.0-0
- Add Publican::Website.
- Add web_*_label params for web menus.
- Add underscores to cleanset, installbrand, and printtree. BZ #581090
- Update docs with Website content
- Update brand license text.
- Fix different log jar path on F14+
- Add constraint to help_config output.
- Fix segfault when indexterm has no leading content. BZ #592666
- Fix inline indexterm. BZ #592823
- Translate productname tag. BZ #592669
- Fix formalpara missing ID. BZ #595564
- Add dummy lang.css to avoid 404's. BZ #595799
- Improve validation error message. BZ #593887
- Fix qandaentry ID. BZ #593892
- Fix Icon non-conformance. BZ #593890
- Fix admonitions splitting across pages. BZ #596257
- Fix HTML simple list border. BZ #599258
- Fix formal object IDs. BZ #601363
- Fix Revision History layout. BZ #559787 #598828 #598833
- Remove title color from term in HTML. BZ #592822
- Fix highlight breaking callouts. BZ #590933
- Add support for LineColumn coords in area tag.
- Update font requires for F12 and F13.
- Fix clean_ids adding newline to verbatim. BZ #604465
- Fix index missing ID. BZ #606418
- Fix files dir being missed. BZ #609345
- Adjust admonition layout.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #581090 - inconsistent action naming style
https://bugzilla.redhat.com/show_bug.cgi?id=581090
[ 2 ] Bug #592666 - PO matching fails when <indexterm> follows another tag without a space
https://bugzilla.redhat.com/show_bug.cgi?id=592666
[ 3 ] Bug #592823 - <indexterm> should not break a paragraph for translation
https://bugzilla.redhat.com/show_bug.cgi?id=592823
[ 4 ] Bug #592669 - RFE -- make <productname> translatable
https://bugzilla.redhat.com/show_bug.cgi?id=592669
[ 5 ] Bug #595564 - RFE: can xref links to formalpara go to the actual formalpara, rather than top of the page?
https://bugzilla.redhat.com/show_bug.cgi?id=595564
[ 6 ] Bug #595799 - Missing lang.css file when publishing to web to avoid 404s
https://bugzilla.redhat.com/show_bug.cgi?id=595799
[ 7 ] Bug #593887 - Terse validity error messages make troubleshooting XML structure issues difficult.
https://bugzilla.redhat.com/show_bug.cgi?id=593887
[ 8 ] Bug #593892 - Hyperlinks in FAQ do not work
https://bugzilla.redhat.com/show_bug.cgi?id=593892
--------------------------------------------------------------------------------
================================================================================
python-cjson-1.0.5-5.fc13 (FEDORA-2010-10728)
Fast JSON encoder/decoder for Python
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Felix Schwarz <felix.schwarz(a)oss.schwarz.eu> - 1.0.5-5
- CVE-2010-1666 (fixed by including a patch from Ubuntu, see Launchpad 585274)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #610877 - CVE-2010-1666 python-cjson: Buffer overflow (crash) when encoding wide Unicode characters on UTF-32/UCS-4
https://bugzilla.redhat.com/show_bug.cgi?id=610877
--------------------------------------------------------------------------------
================================================================================
python-ferari-0.2.0-1.fc13 (FEDORA-2010-10756)
Optimizer for finite element code
--------------------------------------------------------------------------------
Update Information:
* Sat Jul 03 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.2.0-1 -
Updated to new upstream version 0.2.0 - Added new doc files - Updated source
url
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.2.0-1
- Updated to new upstream version 0.2.0
- Added new doc files
- Updated source url
--------------------------------------------------------------------------------
================================================================================
python-fiat-0.9.2-1.fc13 (FEDORA-2010-10791)
Generation of arbitrary order instances of the Lagrange elements
--------------------------------------------------------------------------------
Update Information:
* Sat Jul 03 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.9.2-1 -
Updated to new upstream version 0.9.2 - Updated source url
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.9.2-1
- Updated to new upstream version 0.9.2
- Updated source url
* Tue Feb 23 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.9.1-1
- Changed source URL
- Added docs
- Updated to new upsteram version 0.9.1
--------------------------------------------------------------------------------
================================================================================
python-instant-0.9.8-1.fc13 (FEDORA-2010-10729)
Python module for instant inlining of C and C++ code
--------------------------------------------------------------------------------
Update Information:
* Sat Jul 03 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.9.8-1 -
Updated to new upsteam version 0.9.8 - Updated the spec file to reflect changes
in the guidelines - Updated docs
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.9.8-1
- Updated to new upsteam version 0.9.8
- Updated the spec file to reflect changes in the guidelines
- Updated docs
--------------------------------------------------------------------------------
================================================================================
python-markdown2-1.0.1.17-1.fc13 (FEDORA-2010-10822)
A fast and complete Python implementation of Markdown
--------------------------------------------------------------------------------
Update Information:
Update to upstream version 1.0.1.17. Changes include: * Fixes "cuddled-
lists" extra handling for an looks-like-a-cuddled-list-but-is-indented block.
* Experimental new "toc" extra. * New "header-ids" extra. * Preliminary
support for "html-classes" extra. See http://code.google.com/p/python-
markdown2/source/browse/tags/v1.0.1.17/CHANGES.txt for the full changelist.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jun 3 2010 Thomas Moschny <thomas.moschny(a)gmx.de> - 1.0.1.17-1
- Update to 1.0.17.
- Add patch for failing test.
* Tue Dec 29 2009 Thomas Moschny <thomas.moschny(a)gmx.de> - 1.0.1.16-2
- Patch for older pygments on rhel no longer needed, pygments has been
updated in EPEL.
--------------------------------------------------------------------------------
================================================================================
python-setuptools-0.6.13-5.fc13 (FEDORA-2010-10794)
Easily build and distribute Python packages
--------------------------------------------------------------------------------
Update Information:
At the request of upstream, I've pulled in a patch to fix an incompatibility
with setuptools. I'm hoping to pull the final 0.6.14 release in before this
goes to stable but having this version in testing for a while will help us know
if there's any problems.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Toshio Kuratomi <toshio(a)fedoraproject.org> - 0.6.13-5
- Upstream patch for compatibility problem with setuptools
- Minor spec cleanups
- Provide python-distribute for those who see an import distribute and need
to get the proper package.
--------------------------------------------------------------------------------
================================================================================
python-textile-2.1.4-3.fc13 (FEDORA-2010-10709)
A Humane Web Text Generator
--------------------------------------------------------------------------------
Update Information:
Update to upstream version 2.1.4.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Apr 16 2010 Thomas Moschny <thomas.moschny(a)gmx.de> - 2.1.4-3
- Simplify %check.
* Fri Apr 16 2010 Thomas Moschny <thomas.moschny(a)gmx.de> - 2.1.4-2
- Add missing BR python-nose for the tests.
- Actually run the tests in %check.
- Remove obsolete comment about tidy.
* Fri Apr 16 2010 Thomas Moschny <thomas.moschny(a)gmx.de> - 2.1.4-1
- Update to 2.1.4.
- Use %global instead of %define.
- README is missing in the tarfile.
--------------------------------------------------------------------------------
================================================================================
python-typepad-1.1.2-1.fc13 (FEDORA-2010-10730)
Connectivity to the TypePad API through remote objects
--------------------------------------------------------------------------------
Update Information:
This update brings the latest release of Typepad Motion to Fedora.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Sebastian Dziallas <sebastian(a)when.com> - 1.1.2-1
- new upstream release
--------------------------------------------------------------------------------
================================================================================
qcad-2.0.5.0-12.fc13 (FEDORA-2010-10804)
Simple 2D CAD program
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Alain Portal <alain.portal AT univ-montp2 DOT fr> - 2.0.5.0-12
- Patch to add some missing caracters to the latin1 charset
- Patch to to fix a french mispelling
- Frenchify desktop and spec files
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #611108 - Not all the additionnal latin1 caracters are support
https://bugzilla.redhat.com/show_bug.cgi?id=611108
--------------------------------------------------------------------------------
================================================================================
qlandkartegt-0.18.3-1.fc13 (FEDORA-2010-10750)
GPS device mapping tool
--------------------------------------------------------------------------------
Update Information:
update to 0.18.3 with these fixes and enhacements: - Fixed: typ file not
working on device. - Sort waypoints by name, icon or position - Make track
bubbles an option - Fine tune reference offset for raster maps - Fix
performance stall when loading large quantity (>2000) of waypoints Updated QT
library from https://bugzilla.redhat.com/show_bug.cgi?id=498111#c81 can be
needed for a correct function. update to 0.18.2 with these changes: - Dutch
translation - Add gpsd support (in Rawhide only) - Optimize map rendering for
Garmin maps - Add selection for typ file if there are several update to
0.18.2 with these changes: - Dutch translation - Add gpsd support (in Rawhide
only) - Optimize map rendering for Garmin maps - Add selection for typ file if
there are several
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 3 2010 Dan Horák <dan[at]danny.cz> 0.18.3-1
- update to 0.18.3
- dropped the gtkstyle hack
* Wed May 12 2010 Dan Horák <dan[at]danny.cz> 0.18.2-1
- update to 0.18.2
--------------------------------------------------------------------------------
================================================================================
qlandkartegt-0.18.3-2.fc13 (FEDORA-2010-10790)
GPS device mapping tool
--------------------------------------------------------------------------------
Update Information:
rebuild for newer garmindev
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Dan Horák <dan[at]danny.cz> 0.18.3-2
- newer garmindev is needed
* Sat Jul 3 2010 Dan Horák <dan[at]danny.cz> 0.18.3-1
- update to 0.18.3
- dropped the gtkstyle hack
* Wed May 12 2010 Dan Horák <dan[at]danny.cz> 0.18.2-1
- update to 0.18.2
--------------------------------------------------------------------------------
================================================================================
qlandkartegt-0.18.4-1.fc13 (FEDORA-2010-10832)
GPS device mapping tool
--------------------------------------------------------------------------------
Update Information:
update to 0.18.4 with these fixes and enhancements: - Keep on adding points
when adding points to start or end of distance polyline - Fix: End points are
deleted when moving around is aborted. - Add speed and estimated time to
distance polyline - Select items for export/upload - Fix: Proximity circles
are not drawn if waypoint leaves viewport - Make distance polyline follow lines
in vector map - Change shortcut description from Del to Ctrl + Del in left hand
tool widgets
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Dan Horák <dan[at]danny.cz> 0.18.4-1
- update to 0.18.4
* Sun Jul 4 2010 Dan Horák <dan[at]danny.cz> 0.18.3-2
- newer garmindev is needed
* Sat Jul 3 2010 Dan Horák <dan[at]danny.cz> 0.18.3-1
- update to 0.18.3
- dropped the gtkstyle hack
* Wed May 12 2010 Dan Horák <dan[at]danny.cz> 0.18.2-1
- update to 0.18.2
--------------------------------------------------------------------------------
================================================================================
sslogger-0.96-2.fc13 (FEDORA-2010-10819)
A keystroke logging utility for privileged user escalation
--------------------------------------------------------------------------------
Update Information:
Updated to latest upstream release Latest upstream release, split out remote
logging daemon into sub package
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jul 1 2010 <ebrand(a)fedoraproject.org> 0.96-2
- spec file typo fixes
* Mon Jun 21 2010 <ebrand(a)fedoraproject.org> 0.96-1
- lateset upstream release
- added -r "Reason" to sslogger
- ssloger now display remote slogd server and logID
- sslogger.c bug fixed when writing to localfile using -c and local logging disabled
- Config file moved to /etc/sslogger.d/sslogger.conf
- fixed cordump when tls session is NULL
* Tue Jun 8 2010 <ebrand(a)fedoraproject.org> 0.95-2
- rpm row claims ownership of directory /usr/share/doc/sslogger-<version>
* Sun Jun 6 2010 <edbrand(a)brandint.com> - 0.95-1
- latest upteam release
* Sun Jun 6 2010 <edbrand(a)brandint.com> - 0.94-4
- init script fixes
* Sun Jun 6 2010 <edbrand(a)brandint.com> - 0.94-3
- remaned /var/run/slogd/ /var/run/sslogger
- Renamed slogd binaries sslogger-slogd to match package name
* Mon May 31 2010 <edbrand(a)brandint.com> - 0.94-2
- Spec file fixes:
- pid filename changed to match package
- changed daemon name to match package name
* Sun May 2 2010 <edbrand(a)brandint.com> - 0.94-1
- Fixed bugs in tlsclient, updated release
- Added '-l' option to sslogger
- Added rslog
- Split sslogger-slogd into its own package
- added -lgcrypt in Makefile
* Tue Dec 29 2009 Ed Brand <edbrand(a)brandint.com> - 0.91-10
- Changed $define to $global in spec file
* Tue Dec 29 2009 Ed Brand <edbrand(a)brandint.com> - 0.91-9
- Notify slog server and gracefully termiate tls session when
- running -c <cmd> with log_all_cmds=0
* Tue Dec 29 2009 Ed Brand <edbrand(a)brandint.com> - 0.91-8
- changed popen to dump stderr to stdout
* Tue Dec 29 2009 Ed Brand <edbrand(a)brandint.com> - 0.91-7
- fixed SIGPIP on server close connection
* Tue Dec 29 2009 Ed Brand <edbrand(a)brandint.com> - 0.91-1
- added remote tls logging and slogd server
--------------------------------------------------------------------------------
================================================================================
typepad-motion-1.1.3-1.fc13 (FEDORA-2010-10730)
A microblogging application for building online communities
--------------------------------------------------------------------------------
Update Information:
This update brings the latest release of Typepad Motion to Fedora.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Sebastian Dziallas <sebastian(a)when.com> - 1.1.3-1
- new upstream release
--------------------------------------------------------------------------------
================================================================================
vifir-0.6-1.fc13 (FEDORA-2010-10783)
A viewer for electronic aviation charts
--------------------------------------------------------------------------------
Update Information:
Update for upstream vifir-0.6-1 release
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Dave Ludlow <dave(a)adsllc.com> 0.6-1
- Support the gpsd version 4 API
- Improve the gps data timeout calculation
- Fix checking for valid lat/lon data
- Add gpsd host/port configuration options
- Add ccache compiler-cache support
- Prevent crashes when no data volume is active
--------------------------------------------------------------------------------
================================================================================
wine-1.2.0-0.6.rc6.fc13 (FEDORA-2010-8319)
A Windows 16/32/64 bit emulator
--------------------------------------------------------------------------------
Update Information:
* rework for wow64 support * font package guideline support * latest
winepulse * various cleanups Attention wow64 users: It may be necessary to
start out with a clean ~/.wine
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.2-0.6.rc6
- version upgrade
- use new winelogo from user32
- winepulse upgrade
* Sun Jun 27 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.2-0.5.rc5
- version upgrade
- require liberation-narrow-fonts
* Fri Jun 18 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.2-0.4.rc4
- version upgrade
- fixes winecfg on 64bit (#541986)
- require wine-common from -core to ensure man pages and wine.inf are present
(#528335)
* Sun Jun 13 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.2-0.3.rc3
- version upgrade
* Mon May 31 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.2-0.2.rc2
- version upgrade
* Mon May 24 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.2-0.1.rc1
- upgrade to rc1
- add BR for ImageMagick and icoutils
- spec cleanup
- install available icon files (#594950)
- desktop package requires wine x86-32 because of wine/wine64 rename
- put system/small fonts in right place
* Wed May 19 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.44-5
- fix font issues
* Thu May 13 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.44-4
- fix install of 32bit only wine on x86_64 via install wine.i686
* Wed May 12 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.44-3
- move wine symlink to -wow for 32bit (#591690)
* Tue May 11 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.44-2
- fix manpage conflict between -common and -devel
* Sun May 9 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.44-1
- version upgrade (#580024)
* Sun Apr 18 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.43-1
- version upgrade
* Sun Apr 11 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.42-1
- version upgrade
- rework for wow64
* Mon Mar 29 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.41-3
- add support for mingw32-wine-gecko
* Sun Mar 28 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.41-2
- convert to font package guidelines
- add libv4l-devel BR
* Sun Mar 28 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.41-1
- version upgrade (#577587, #576607)
- winepulse upgrade (0.36)
* Sat Mar 6 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.40-1
- version upgrade
* Sun Feb 21 2010 Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
- 1.1.39-1
- version upgrade
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #580024 - wine-1.1.44 is available
https://bugzilla.redhat.com/show_bug.cgi?id=580024
[ 2 ] Bug #591690 - wine 32-bit and 64-bit packages share /usr/bin/wine
https://bugzilla.redhat.com/show_bug.cgi?id=591690
[ 3 ] Bug #594950 - Use new icons for Wine menu
https://bugzilla.redhat.com/show_bug.cgi?id=594950
[ 4 ] Bug #603337 - Wine 1.2-rc3 is available
https://bugzilla.redhat.com/show_bug.cgi?id=603337
[ 5 ] Bug #541986 - Wine -- winecfg crashes clicking the Audio tab when wine-{alsa,pulseaudio,oss} are installed
https://bugzilla.redhat.com/show_bug.cgi?id=541986
[ 6 ] Bug #528335 - wine-common not required by wine-core
https://bugzilla.redhat.com/show_bug.cgi?id=528335
--------------------------------------------------------------------------------
================================================================================
xautomation-1.03-3.fc13 (FEDORA-2010-10828)
Tools to automate tasks in X, even detecting on screen images
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #603904 - Review Request: xautomation - Tools to automate tasks in X, even detecting on screen images
https://bugzilla.redhat.com/show_bug.cgi?id=603904
--------------------------------------------------------------------------------
================================================================================
xbacklight-1.1.1-1.fc13 (FEDORA-2010-10797)
Adjust backlight brightness using RandR
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Michel Salim <salimma(a)fedoraproject.org> - 1.1.1-1
- Update to 1.1.1
--------------------------------------------------------------------------------
================================================================================
xterm-261-2.fc13 (FEDORA-2010-10800)
Terminal emulator for the X Window System
--------------------------------------------------------------------------------
Update Information:
Changelog: http://invisible-island.net/xterm/xterm.log.html
--------------------------------------------------------------------------------
ChangeLog:
* Fri Jul 2 2010 Miroslav Lichvar <mlichvar(a)redhat.com> 261-2
- remove NoDisplay=true from desktop file, use upstream version (#607018)
* Tue Jun 29 2010 Miroslav Lichvar <mlichvar(a)redhat.com> 261-1
- update to 261
* Mon Jun 21 2010 Miroslav Lichvar <mlichvar(a)redhat.com> 260-1
- update to 260
* Thu Jun 10 2010 Miroslav Lichvar <mlichvar(a)redhat.com> 259-1
- update to 259
- link with -lICE
- convert THANKS to UTF-8
* Wed May 5 2010 Miroslav Lichvar <mlichvar(a)redhat.com> 258-1
- update to 258
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #607018 - does not show up in menus/launchers - NoDisplay=true
https://bugzilla.redhat.com/show_bug.cgi?id=607018
[ 2 ] Bug #602876 - [abrt] crash in xterm-256-1.fc13: ScrnRefresh: Process /usr/bin/xterm was killed by signal 11 (SIGSEGV)
https://bugzilla.redhat.com/show_bug.cgi?id=602876
--------------------------------------------------------------------------------
================================================================================
xtide-2.11-0.8.RC1.fc13 (FEDORA-2010-10788)
Calculate tide all over the world
--------------------------------------------------------------------------------
Update Information:
New version 2.11 RC1 is released.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 4 2010 Mamoru Tasaka <mtasaka(a)ioa.s.u-tokyo.ac.jp> - 2.11-0.8.RC1
- 2.11 RC1
--------------------------------------------------------------------------------
================================================================================
yumex-2.9.9-1.fc13 (FEDORA-2010-10723)
Yum Extender graphical package management tool
--------------------------------------------------------------------------------
Update Information:
bugfixes
--------------------------------------------------------------------------------
ChangeLog:
* Tue Jul 6 2010 Tim Lauridsen <timlau(a)fedoraproject.org> - 2.9.9-1
- bumped version to 2.9.9-1
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #597140 - Language package list is not sorted
https://bugzilla.redhat.com/show_bug.cgi?id=597140
[ 2 ] Bug #605181 - [abrt] crash in yumex-2.9.8-1.fc13: gui.py:138:find:TypeError: __init__() takes exactly 3 arguments (2 given)
https://bugzilla.redhat.com/show_bug.cgi?id=605181
--------------------------------------------------------------------------------
================================================================================
zfs-fuse-0.6.9-5.fc13 (FEDORA-2010-10775)
ZFS ported to Linux FUSE
--------------------------------------------------------------------------------
Update Information:
* Mon Jul 05 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9-5 - Cleanup of RPM spec
and init script * Sun Jul 04 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9-4 -
Patched SConstruct to define NDEBUG instead of DEBUG to avoid debug code while
still generating debug symbols - Added moving of zfs.cache when updating from
pre 0.6.9 version * Sat Jul 03 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9-2 -
Updated to upstream stable release 0.6.9 - Patched default debug level from 0 to
1 - Fixed missing compiler flags and debug flag in build: BUG 595442 * Sat May
22 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9_beta3-6 - Updated to upstream
version 0.6.9_beta3 - Add more build requires to build on F13 BUG 565076 - Add
patches for missing libraries and includes to build on F13 BUG 565076 - Added
packages for ppc and ppc64 - Build on F13 BUG 565076 - Fixes BUG 558172 - Added
man files - Added zfs_pool_alert - Added zstreamdump - Fixed bug in automatic
scrub script BUG 559518
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jul 5 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9-5
- Cleanup of RPM spec and init script
* Sun Jul 4 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9-4
- Patched SConstruct to define NDEBUG instead of DEBUG to avoid debug code while still generating debug symbols
- Added moving of zfs.cache when updating from pre 0.6.9 version
* Sat Jul 3 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9-2
- Updated to upstream stable release 0.6.9
- Patched default debug level from 0 to 1
- Fixed missing compiler flags and debug flag in build: BUG 595442
* Sat May 22 2010 Uwe Kubosch <uwe(a)kubosch.no> - 0.6.9_beta3-6
- Updated to upstream version 0.6.9_beta3
- Add more build requires to build on F13 BUG 565076
- Add patches for missing libraries and includes to build on F13 BUG 565076
- Added packages for ppc and ppc64
- Build on F13 BUG 565076
- Fixes BUG 558172
- Added man files
- Added zfs_pool_alert
- Added zstreamdump
- Fixed bug in automatic scrub script BUG 559518
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #595442 - zfs-fuse 0.6.9_beta3-6.fc14 not built with $RPM_OPT_FLAGS
https://bugzilla.redhat.com/show_bug.cgi?id=595442
[ 2 ] Bug #565076 - FTBFS zfs-fuse-0.6.0-6.fc13
https://bugzilla.redhat.com/show_bug.cgi?id=565076
[ 3 ] Bug #558172 - zfs-fuse hangs on complex pools.
https://bugzilla.redhat.com/show_bug.cgi?id=558172
[ 4 ] Bug #559518 - /etc/cron.weekly/98-zfs-fuse-scrub fails due to syntax errors
https://bugzilla.redhat.com/show_bug.cgi?id=559518
--------------------------------------------------------------------------------
13 years, 9 months
[Fedora QA] #71: Proventester request
by fedora-badges
#71: Proventester request
-----------------------------------------+----------------------------------
Reporter: kevin | Owner:
Type: proventester request | Status: new
Priority: major | Milestone:
Component: Proventester Mentor Request | Version:
Keywords: |
-----------------------------------------+----------------------------------
I've been working with Fedora for a while and would like to be a
proventester so I could help test Xfce and other updates in the critical
path.
Happy to work with a mentor or whatever.
--
Ticket URL: <https://fedorahosted.org/fedora-qa/ticket/71>
Fedora QA <http://fedorahosted.org/fedora-qa>
Fedora Quality Assurance
13 years, 9 months
Fedora 14 Schedule Reminder
by John Poelstra
Start End Name
Thu 08-Jul Fri 16-Jul Pre-Alpha Rawhide Acceptance Test Plan #1
Tue 13-Jul Tue 13-Jul Feature Submission Deadline
Thu 15-Jul Thu 22-Jul Pre-Alpha Rawhide Acceptance Test Plan #2
Fri 16-Jul Fri 16-Jul Alpha Blocker Meeting (f14alpha) #1
13 years, 9 months
rawhide report: 20100706 changes
by Fedora compose checker
Compose started at Tue Jul 6 08:15:06 UTC 2010
Broken deps for i386
----------------------------------------------------------
BackupPC-3.1.0-14.fc14.noarch requires perl-suidperl
1:anjuta-2.30.0.0-2.fc14.i686 requires libgladeui-1.so.9
1:anjuta-2.30.0.0-2.fc14.i686 requires libwebkit-1.0.so.2
claws-mail-plugins-geolocation-3.7.6-3.fc14.i686 requires libchamplain-gtk-0.4.so.0
claws-mail-plugins-geolocation-3.7.6-3.fc14.i686 requires libchamplain-0.4.so.0
dates-0.4.11-3.fc14.i686 requires libedataserver-1.2.so.11
deskbar-applet-2.30.0-1.1.fc14.i686 requires libedataserver-1.2.so.12
eclipse-checkstyle-4.0.1-14.fc12.noarch requires checkstyle-optional = 0:4.1
eclipse-checkstyle-4.0.1-14.fc12.noarch requires checkstyle = 0:4.1
emerillon-0.1.1-2.fc13.i686 requires libchamplain-0.4.so.0
emerillon-0.1.1-2.fc13.i686 requires libchamplain-gtk-0.4.so.0
emerillon-devel-0.1.1-2.fc13.i686 requires pkgconfig(champlain-0.4)
empathy-2.31.3-3.fc14.i686 requires libchamplain-gtk-0.4.so.0
empathy-2.31.3-3.fc14.i686 requires libchamplain-0.4.so.0
eog-plugins-2.30.0-1.fc14.i686 requires libchamplain-0.4.so.0
eog-plugins-2.30.0-1.fc14.i686 requires libchamplain-gtk-0.4.so.0
epiphany-2.31.3-1.fc14.i686 requires libwebkit-1.0.so.2
evolution-rss-0.1.9-7.20100525git.fc14.i686 requires libwebkit-1.0.so.2
gmpc-0.19.1-3.fc14.i686 requires libwebkit-1.0.so.2
gnome-phone-manager-0.65-6.fc14.i686 requires libgnome-bluetooth.so.7
gnucash-2.3.13-1.fc14.i686 requires libwebkit-1.0.so.2
gpx-viewer-0.1.2-2.fc14.i686 requires libchamplain-0.4.so.0
gpx-viewer-0.1.2-2.fc14.i686 requires libchamplain-gtk-0.4.so.0
7:kdenetwork-4.4.90-1.fc14.i686 requires libmsn.so.0.1
kst-fits-1.8.0-7.fc14.i686 requires cfitsio = 0:3.240
lekhonee-gnome-0.11-2.fc14.i686 requires libwebkit-1.0.so.2
libpeas-0.5.1-1.fc14.i686 requires libgdk_pixbuf-3.0.so.0
libpeas-devel-0.5.1-1.fc14.i686 requires libgdk_pixbuf-3.0.so.0
1:liferea-1.6.3-1.fc14.i686 requires libwebkit-1.0.so.2
maven2-plugin-checkstyle-2.0.8-3.fc12.noarch requires checkstyle-optional >= 0:4.1
merkaartor-0.16.1-1.fc13.i686 requires libexiv2.so.6
midori-0.2.6-1.fc14.i686 requires libwebkit-1.0.so.2
mingw32-OpenSceneGraph-2.8.2-4.fc14.noarch requires mingw32(libpng-3.dll)
moblin-panel-status-0.1.21-3.fc14.i686 requires libchamplain-0.4.so.0
perl-DBI-Dumper-2.01-8.fc12.i686 requires perl(:MODULE_COMPAT_5.10.0)
perl-Data-Alias-1.07-6.fc13.i686 requires perl(:MODULE_COMPAT_5.10.1)
perl-Pugs-Compiler-Rule-0.37-4.fc13.noarch requires perl(:MODULE_COMPAT_5.10.1)
perl-Test-AutoBuild-1.2.2-9.fc12.i686 requires perl(:MODULE_COMPAT_5.10.0)
plexus-containers-component-annotations-javadoc-1.0-0.1.a34.7.fc12.noarch requires jakarta-commons-logging-javadoc
python3-beaker-1.5.3-4.fc14.noarch requires python3-paste
pywebkitgtk-1.1.6-3.fc14.i686 requires libwebkit-1.0.so.2
qtgpsc-0.2.3-6.fc12.i686 requires libgps.so.18
seed-2.31.1-1.fc14.i686 requires libwebkit-1.0.so.2
shotwell-0.5.2-1.fc14.i686 requires libwebkit-1.0.so.2
skyviewer-1.0.0-4.fc14.i686 requires libQGLViewer.so.2.3.5
spacewalk-certs-tools-1.1.1-1.fc14.noarch requires spacewalk-backend-libs >= 0:0.8.28
themonospot-gui-qt-0.1.3-6.fc14.i686 requires mono(qt-dotnet) = 0:4.5.0.0
themonospot-gui-qt-0.1.3-6.fc14.i686 requires libqyotoshared.so.1
vfrnav-0.4-1.fc13.i686 requires libgps.so.18
viking-0.9.91-3.fc13.i686 requires libgps.so.18
xcf-pixbuf-loader-0.0.1-3.8af913d1.fc14.i686 requires /usr/lib/gtk-2.0/2.10.0/loaders
xenner-0.48-1.fc14.i386 requires libxenguest.so.3.4
Broken deps for x86_64
----------------------------------------------------------
BackupPC-3.1.0-14.fc14.noarch requires perl-suidperl
1:anjuta-2.30.0.0-2.fc14.i686 requires libgladeui-1.so.9
1:anjuta-2.30.0.0-2.fc14.i686 requires libwebkit-1.0.so.2
1:anjuta-2.30.0.0-2.fc14.x86_64 requires libgladeui-1.so.9()(64bit)
1:anjuta-2.30.0.0-2.fc14.x86_64 requires libwebkit-1.0.so.2()(64bit)
claws-mail-plugins-geolocation-3.7.6-3.fc14.x86_64 requires libchamplain-gtk-0.4.so.0()(64bit)
claws-mail-plugins-geolocation-3.7.6-3.fc14.x86_64 requires libchamplain-0.4.so.0()(64bit)
dates-0.4.11-3.fc14.x86_64 requires libedataserver-1.2.so.11()(64bit)
deskbar-applet-2.30.0-1.1.fc14.x86_64 requires libedataserver-1.2.so.12()(64bit)
eclipse-checkstyle-4.0.1-14.fc12.noarch requires checkstyle-optional = 0:4.1
eclipse-checkstyle-4.0.1-14.fc12.noarch requires checkstyle = 0:4.1
emerillon-0.1.1-2.fc13.x86_64 requires libchamplain-gtk-0.4.so.0()(64bit)
emerillon-0.1.1-2.fc13.x86_64 requires libchamplain-0.4.so.0()(64bit)
emerillon-devel-0.1.1-2.fc13.i686 requires pkgconfig(champlain-0.4)
emerillon-devel-0.1.1-2.fc13.x86_64 requires pkgconfig(champlain-0.4)
empathy-2.31.3-3.fc14.x86_64 requires libchamplain-0.4.so.0()(64bit)
empathy-2.31.3-3.fc14.x86_64 requires libchamplain-gtk-0.4.so.0()(64bit)
eog-plugins-2.30.0-1.fc14.x86_64 requires libchamplain-gtk-0.4.so.0()(64bit)
eog-plugins-2.30.0-1.fc14.x86_64 requires libchamplain-0.4.so.0()(64bit)
epiphany-2.31.3-1.fc14.x86_64 requires libwebkit-1.0.so.2()(64bit)
evolution-rss-0.1.9-7.20100525git.fc14.x86_64 requires libwebkit-1.0.so.2()(64bit)
gmpc-0.19.1-3.fc14.x86_64 requires libwebkit-1.0.so.2()(64bit)
gnome-phone-manager-0.65-6.fc14.x86_64 requires libgnome-bluetooth.so.7()(64bit)
gnucash-2.3.13-1.fc14.x86_64 requires libwebkit-1.0.so.2()(64bit)
gpx-viewer-0.1.2-2.fc14.x86_64 requires libchamplain-gtk-0.4.so.0()(64bit)
gpx-viewer-0.1.2-2.fc14.x86_64 requires libchamplain-0.4.so.0()(64bit)
7:kdenetwork-4.4.90-1.fc14.x86_64 requires libmsn.so.0.1()(64bit)
kst-fits-1.8.0-7.fc14.x86_64 requires cfitsio = 0:3.240
lekhonee-gnome-0.11-2.fc14.x86_64 requires libwebkit-1.0.so.2()(64bit)
libpeas-0.5.1-1.fc14.i686 requires libgdk_pixbuf-3.0.so.0
libpeas-0.5.1-1.fc14.x86_64 requires libgdk_pixbuf-3.0.so.0()(64bit)
libpeas-devel-0.5.1-1.fc14.i686 requires libgdk_pixbuf-3.0.so.0
libpeas-devel-0.5.1-1.fc14.x86_64 requires libgdk_pixbuf-3.0.so.0()(64bit)
1:liferea-1.6.3-1.fc14.x86_64 requires libwebkit-1.0.so.2()(64bit)
maven2-plugin-checkstyle-2.0.8-3.fc12.noarch requires checkstyle-optional >= 0:4.1
merkaartor-0.16.1-1.fc13.x86_64 requires libexiv2.so.6()(64bit)
midori-0.2.6-1.fc14.x86_64 requires libwebkit-1.0.so.2()(64bit)
mingw32-OpenSceneGraph-2.8.2-4.fc14.noarch requires mingw32(libpng-3.dll)
moblin-panel-status-0.1.21-3.fc14.x86_64 requires libchamplain-0.4.so.0()(64bit)
perl-DBI-Dumper-2.01-8.fc12.x86_64 requires perl(:MODULE_COMPAT_5.10.0)
perl-Data-Alias-1.07-6.fc13.x86_64 requires perl(:MODULE_COMPAT_5.10.1)
perl-Pugs-Compiler-Rule-0.37-4.fc13.noarch requires perl(:MODULE_COMPAT_5.10.1)
perl-Test-AutoBuild-1.2.2-9.fc12.x86_64 requires perl(:MODULE_COMPAT_5.10.0)
plexus-containers-component-annotations-javadoc-1.0-0.1.a34.7.fc12.noarch requires jakarta-commons-logging-javadoc
python3-beaker-1.5.3-4.fc14.noarch requires python3-paste
pywebkitgtk-1.1.6-3.fc14.x86_64 requires libwebkit-1.0.so.2()(64bit)
qtgpsc-0.2.3-6.fc12.x86_64 requires libgps.so.18()(64bit)
seed-2.31.1-1.fc14.i686 requires libwebkit-1.0.so.2
seed-2.31.1-1.fc14.x86_64 requires libwebkit-1.0.so.2()(64bit)
shotwell-0.5.2-1.fc14.x86_64 requires libwebkit-1.0.so.2()(64bit)
skyviewer-1.0.0-4.fc14.x86_64 requires libQGLViewer.so.2.3.5()(64bit)
spacewalk-certs-tools-1.1.1-1.fc14.noarch requires spacewalk-backend-libs >= 0:0.8.28
themonospot-gui-qt-0.1.3-6.fc14.x86_64 requires mono(qt-dotnet) = 0:4.5.0.0
themonospot-gui-qt-0.1.3-6.fc14.x86_64 requires libqyotoshared.so.1()(64bit)
vfrnav-0.4-1.fc13.x86_64 requires libgps.so.18()(64bit)
viking-0.9.91-3.fc13.x86_64 requires libgps.so.18()(64bit)
xcf-pixbuf-loader-0.0.1-3.8af913d1.fc14.i686 requires /usr/lib/gtk-2.0/2.10.0/loaders
xcf-pixbuf-loader-0.0.1-3.8af913d1.fc14.x86_64 requires /usr/lib64/gtk-2.0/2.10.0/loaders
xenner-0.48-1.fc14.x86_64 requires libxenguest.so.3.4()(64bit)
New package WebCalendar
Single/multi-user web-based calendar application
New package atkmm
C++ interface for the ATK library
New package clamz
Amazon Downloader
New package php-captchaphp
PHP very user-friendly CAPTCHA solution
New package xautomation
Tools to automate tasks in X, even detecting on screen images
New package xnoise-plugins-core
Core plugins for xnoise
Updated Packages:
R-GeneR-2.18.1-1.fc14
---------------------
* Mon Jul 05 2010 pingou <pingou(a)pingoured.fr> 2.18.1-1
- Update to version 2.18.1
- Remove link to BioC
- Remove R post and R postun
- Remove patch from Milos (Thanks to him)
anerley-0.2.14-2.fc14
---------------------
* Mon Jul 05 2010 Peter Robinson <pbrobinson(a)gmail.com> 1:0.2.14-2
- Bump build for new libmx
asymptote-2.01-1.fc14
---------------------
* Mon Jul 05 2010 Tom "spot" Callaway <tcallawa(a)redhat.com> - 2.01-1
- update to 2.01
autoconf-2.66-2.fc14
--------------------
* Tue Jul 06 2010 Karsten Hopp <karsten(a)redhat.com> 2.66-2
- add 2 upstream patches (#611661)
- allow rpmbuild --without check
* Mon Jul 05 2010 Stepan Kasal <kasal(a)ucw.cz> - 2.66-1
- new upstream version, drop upstreamed patches
awn-extras-applets-0.4.0-18.fc14
--------------------------------
* Mon Jul 05 2010 Leigh Scott <leigh123linux(a)googlemail.com> - 0.4.0-18
- rebuild for libwebkit
corosync-1.2.6-1.fc14
---------------------
* Mon Jul 05 2010 Fabio M. Di Nitto <fdinitto(a)redhat.com> - 1.2.6-1
- New upstream release
- Resync spec file with upstream changes
empathy-2.31.3-3.fc14
---------------------
* Sun Jul 04 2010 Brian Pepple <bpepple(a)fedoraproject.org> - 2.31.3-3
- Rebuild for new webkit.
fedora-package-config-apt-13.89-7
---------------------------------
* Mon Jul 05 2010 Axel Thimm <Axel.Thimm(a)ATrpms.net> - 13.89-7
- Update to F14 rawhide.
fedora-package-config-smart-13.89-21
------------------------------------
* Mon Jul 05 2010 Axel Thimm <Axel.Thimm(a)ATrpms.net> - 13.89-21
- Update to F14 rawhide.
gimp-2.6.9-5.fc14
-----------------
* Mon Jul 05 2010 Nils Philippsen <nils(a)redhat.com> - 2:2.6.9-5
- rebuild against libwebkitgtk (instead of libwebkit)
glpk-4.43-2.fc14
----------------
* Mon Jul 05 2010 Conrad Meyer <konrad(a)tylerc.org> 4.43-2
- Move header to normal includedir
gnome-bluetooth-2.90.0-2.fc14
-----------------------------
* Mon Jul 05 2010 Peter Robinson <pbrobinson(a)gmail.com> 2.90.0-2
- Rebuild for new libmx
gnome-chemistry-utils-0.12.1-2.fc14
-----------------------------------
* Mon Jul 05 2010 Julian Sikorski <belegdol(a)fedoraproject.org> - 0.12.1-2
- Rebuilt for new gnumeric
gnome-libs-1.4.2-16.fc14
------------------------
* Mon Jul 05 2010 Paul Howarth <paul(a)city-fan.org> 1:1.4.2-16
- Drop %{_datadir}/aclocal dependency from devel package from Fedora 14,
where this directory is part of the filesystem package (#533962)
- Drop manual pkgconfig dependency from devel package from Fedora 11, where
this dependency is auto-detected
- EL-6 uses xdg-open rather than htmlview
gst123-0.1.2-1.fc14
-------------------
* Tue Jul 06 2010 Siddhesh Poyarekar <spoyarek(a)redhat.com> - 0.1.2-1
- rebase to upstream 0.1.2. Closes bug 611587, 603681
gtkmm24-2.21.1-1.fc14
---------------------
* Mon Jul 05 2010 Haïkel Guémar <hguemar(a)fedoraproject.org> - 2.21.1-1
* Update to upstream 2.21.1
- close RHBZ #610195 (first step for parallel installable Gtkmm stacks)
- build patch from Kalev
hunspell-1.2.11-3.fc14
----------------------
* Mon Jul 05 2010 Caolán McNamara <caolanm(a)redhat.com> - 1.2.11-3
- add korean Hangul syllable support
hunspell-ko-0.4.2-2.fc14
------------------------
* Mon Jul 05 2010 Caolán McNamara <caolanm(a)redhat.com> - 0.4.2-2
- enable make check now that hunspell is fixed to know about
hangul syllables
kernel-2.6.35-0.25.rc4.git0.fc14
--------------------------------
* Mon Jul 05 2010 Dave Jones <davej(a)redhat.com>
- 2.6.35-rc4
libchamplain-0.6.1-1.fc14
-------------------------
* Mon Jul 05 2010 Peter Robinson <pbrobinson(a)gmail.com> - 0.6.1-1
- Version bump to 0.6.1. Enable python and vala bindings
http://ftp.gnome.org/pub/GNOME/sources/libchamplain/0.6/libchamplain-0.6....
libmsn-4.1-1.fc14
-----------------
* Mon Jul 05 2010 John5342 <john5342 at, fedoraproject.org> - 4.1-1
- libmsn-4.1
* Sat Nov 14 2009 John5342 <john5342 at, fedoraproject.org> - 4.0-1
- 4.0 final
libproxy-0.4.4-5.fc14
---------------------
* Mon Jul 05 2010 Nathaniel McCallum <nathaniel(a)natemccallum.com> - 0.4.4-5
- Re-enable mozjs and webkit
* Mon Jul 05 2010 Nathaniel McCallum <nathaniel(a)natemccallum.com> - 0.4.4-4
- Disable mozjs to get around a build error temporarily
* Mon Jul 05 2010 Nathaniel McCallum <nathaniel(a)natemccallum.com> - 0.4.4-3
- Disable webkit subpackage in order to resolve circular dep
* Sat Jul 03 2010 Nathaniel McCallum <nathaniel(a)natemccallum.com> - 0.4.4-2
- Fix missing BuildRequires: libmodman-devel
* Sun Jun 13 2010 Nathaniel McCallum <nathaniel(a)natemccallum.com> - 0.4.4-1
- Update to 0.4.4
- Removed install workarounds (fixed upstream)
- Removed patches (fixed upstream)
- Moved -python to noarch
- Downgrade cmake requirement (upstream change)
- Disabled perl bindings
- Run tests
libvirt-0.8.2-1.fc14
--------------------
* Mon Jul 05 2010 Daniel Veillard <veillard(a)redhat.com> - 0.8.2-1
- Upstream release 0.8.2
- phyp: adding support for IVM
- libvirt: introduce domainCreateWithFlags API
- add 802.1Qbh and 802.1Qbg switches handling
- Support for VirtualBox version 3.2
- Init script for handling guests on shutdown/boot
- qemu: live migration with non-shared storage for kvm
* Fri Apr 30 2010 Daniel Veillard <veillard(a)redhat.com> - 0.8.1-1
- Upstream release 0.8.1
- Starts dnsmasq from libvirtd with --dhcp-hostsfile
- Add virDomainGetBlockInfo API to query disk sizing
- a lot of bug fixes and cleanups
maildrop-2.5.0-13.fc14
----------------------
* Mon Jul 05 2010 Axel Thimm <Axel.Thimm(a)ATrpms.net> - 2.5.0-13
- Update to 2.5.0.
man-pages-ja-20100415-2.fc14
----------------------------
* Mon Jul 05 2010 Akira TAGOH <tagoh(a)redhat.com> - 20100415-2
- Update less(1) to add a description of a command '&pattern'.
mediawiki-1.15.4-54.fc14
------------------------
* Mon Jul 05 2010 Axel Thimm <Axel.Thimm(a)ATrpms.net> - 1.15.4-54
- Update to 1.5.14 (Fixes CVE-2010-1647 CVE-2010-1648).
- Change BR php to php-common (RH bug #549822).
moblin-panel-applications-0.1.28-2.fc14
---------------------------------------
* Mon Jul 05 2010 Peter Robinson <pbrobinson(a)gmail.com> 0.1.28-2
- Rebuild for new libmx
moblin-panel-pasteboard-0.0.6-2.fc14
------------------------------------
* Mon Jul 05 2010 Peter Robinson <pbrobinson(a)gmail.com> 0.0.6-2
- Rebuild for new libmx
moblin-panel-people-0.1.13-2.fc14
---------------------------------
* Mon Jul 05 2010 Peter Robinson <pbrobinson(a)gmail.com> 0.1.13-2
- Rebuild against new libmx
moblin-panel-status-0.1.21-3.fc14
---------------------------------
* Mon Jul 05 2010 Peter Robinson <pbrobinson(a)gmail.com> 0.1.21-3
- Rebuild against new libmx
monit-5.1.1-1.fc14
------------------
* Mon Jul 05 2010 Maxim Burgerhout <wzzrd(a)fedoraproject.org> - 5.1.1-1
- Version bump to 5.1.1 (needed new version of monit-no-startup-msg.patch)
- Ghosted the logfile
mutter-moblin-0.75.16-3.fc14
----------------------------
* Mon Jul 05 2010 Peter Robinson <pbrobinson(a)gmail.com> 0.75.16-3
- Rebuild for new libmx
olpc-utils-1.0.25-2.fc14
------------------------
* Mon Jul 05 2010 Daniel Drake <dsd(a)laptop.org> - 1.0.25-2
- fix build
* Mon Jul 05 2010 Daniel Drake <dsd(a)laptop.org> - 1.0.25-1
- Update to v1.0.25
- Adds support for lego wedo, and fixes mouse configuration for XO-1
pangomm-2.26.2-1.fc14
---------------------
* Mon Jul 05 2010 Kalev Lember <kalev(a)smartlink.ee> - 2.26.2-1
- Update to 2.26.2
php-pear-1.9.1-2.fc14
---------------------
* Mon Jul 05 2010 Remi Collet <Fedora(a)FamilleCollet.com> 1:1.9.1-2
- update to XML_RPC-1.5.4
poker3d-1.1.36-18.fc14
----------------------
* Mon Jul 05 2010 Ralf Corsépius <corsepiu(a)fedoraproject.org> - 1.1.36-18
- Rebuild against OSG-2.8.3.
- Apply more fine-grained %{python_sitearch}/%{python_sitelib} packaging to
prevent "file listed twice" warnings.
publican-2.0-0.fc14
-------------------
* Tue Jul 06 2010 Jeff Fearn <jfearn(a)redhat.com> 2.0-0
- Add Publican::Website.
- Add web_*_label params for web menus.
- Add underscores to cleanset, installbrand, and printtree. BZ #581090
- Update docs with Website content
- Update brand license text.
- Fix different log jar path on F14+
- Add constraint to help_config output.
- Fix segfault when indexterm has no leading content. BZ #592666
- Fix inline indexterm. BZ #592823
- Translate productname tag. BZ #592669
- Fix formalpara missing ID. BZ #595564
- Add dummy lang.css to avoid 404's. BZ #595799
- Improve validation error message. BZ #593887
- Fix qandaentry ID. BZ #593892
- Fix Icon non-conformance. BZ #593890
- Fix admonitions splitting across pages. BZ #596257
- Fix HTML simple list border. BZ #599258
- Fix formal object IDs. BZ #601363
- Fix Revision History layout. BZ #559787 #598828 #598833
- Remove title color from term in HTML. BZ #592822
- Fix highlight breaking callouts. BZ #590933
- Add support for LineColumn coords in area tag.
- Update font requires for F12 and F13.
- Fix clean_ids adding newline to verbatim. BZ #604465
- Fix index missing ID. BZ #606418
- Fix files dir being missed. BZ #609345
- Adjust admonition layout.
surf-0.4.1-2.fc14
-----------------
* Mon Jul 05 2010 Simon Wesp <cassmodiah(a)fedoraproject.org> - 0.4.1-2
- Rebuild against new version of webkitgtk
vifir-0.6-1.fc14
----------------
* Mon Jul 05 2010 Dave Ludlow <dave(a)adsllc.com> 0.6-1
- Support the gpsd version 4 API
- Improve the gps data timeout calculation
- Fix checking for valid lat/lon data
- Add gpsd host/port configuration options
- Add ccache compiler-cache support
- Prevent crashes when no data volume is active
* Fri May 14 2010 Dave Ludlow <dave(a)adsllc.com> 0.5-1
- Add X-Plane 9.00 airport data import support
- Numerous tweaks for future Win32 support
- Code style/standardization support
- Fix runway headings import decimal shifting
- Data import performance tweaks
- Add airport info dialog
- Add i18n support
- Reduce nuisance warnings
- Incorporate some changes from Fabian Affolter's Fedora .spec file.
* Sun May 09 2010 Fabian Affolter <fabian(a)bernewireless.net> - 0.4-3
- Rebuild for new gpsd
xbacklight-1.1.1-1.fc14
-----------------------
* Mon Jul 05 2010 Michel Salim <salimma(a)fedoraproject.org> - 1.1.1-1
- Update to 1.1.1
yumex-2.9.9-1.fc14
------------------
* Tue Jul 06 2010 Tim Lauridsen <timlau(a)fedoraproject.org> - 2.9.9-1
- bumped version to 2.9.9-1
zile-2.3.17-1.fc14
------------------
* Mon Jul 05 2010 Rakesh Pandit <rakesh(a)fedoraproject.org> - 2.3.17-1
- Updated to 2.3.17
Summary:
Added Packages: 6
Removed Packages: 0
Modified Packages: 42
13 years, 9 months