I'm trying to get qemu set up under Rawhide, and I am getting the
following error when trying to build the kernel module:
make -C common all
make: Entering directory `/usr/src/kqemu-1.3.0-0.1.pre11/common'
gcc -Wall -O2 -fomit-frame-pointer -fno-strict-aliasing -Werror
-fno-stack-protector -D__KERNEL__ -nostdinc -iwithprefix include -I.
-I.. -c -o monitor.o monitor.c
common.c: In function ‘get_vaddr’:
common.c:156: internal compiler error: Segmentation fault
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://bugzilla.redhat.com/bugzilla> for instructions.
Preprocessed source stored into /tmp/ccS18pYS.out file, please attach
this to your bugreport.
make: *** [monitor.o] Error 1
make: Leaving directory `/usr/src/kqemu-1.3.0-0.1.pre11/common'
make: *** [kqemu.ko] Error 2
Anybody else seeing this?
I got suspend to work! But I only got it working with Rawhide Live CD 20050517 !
If you wish you can see the track of this epochal endeavor her:
Rawhide Live CD 20050517 uses kernel 2.6.21-1.3163 and suspend/resume
work flawlessly with these quirks:
pm-suspend --quirk-vbe-post --quirk-vbemode-restore
I suspected my fedora 7 test 4 was the problem when I managed to get
suspend/resume working on a few laptops with not too much trouble with
rawhide live cd. I guess that kernel is to blame or my installation
got tainted in some way. So I decided that my laptop also deserves
sterile test environment.
So to conclude:
- rmmod iwl3945 (if you don't remove this module first there is no way
to suspend/resume your system)
- don't test with Fedora 7 test 4 installed on your hdd
- instead use Fedora 7 live CD for suspend/resume troubleshooting
- live cd is much easier on the hardware because freezing a running
system with mounted partitions can potentially cause data loss and
errors on your partitions
- disable Virtualisation in bios if you have it
- quirks page is not that bad as I bashed it in the beginning, sorry Richard :)
this got my system to suspend/resume - but still installed version
doesn't resume from suspend. I'll wait for official Fedora 7 and try
Ritchard should I send these quirks for nx7300 even if it works only
under live cd environment?
here is lshal listing for my laptop:
$ lshal |grep system.hardware
system.hardware.product = 'HP Compaq nx7300 (RU374ES#AKN)' (string)
system.hardware.serial = 'CNU65015JF' (string)
system.hardware.uuid = '07F8BA4E-97D7-DD11-2580-6D990C593D29' (string)
system.hardware.vendor = 'Hewlett-Packard' (string)
system.hardware.version = 'F.0B' (string)
Valent from Croatia.
linux, blog, anime, spirituality, windsurf, wireless
registered as user #367004 with the Linux Counter, http://counter.li.org.
I'm trying to update my rawhide machine and I'm getting breakage with
$ yum -y update
---> Package fuse.x86_64 0:2.6.5-1.fc7 set to be updated
fontconfig-devel x86_64 2.4.2-3.fc7 development
fuse x86_64 2.6.5-1.fc7 development
gcc x86_64 4.1.2-12 development
Transaction Check Error:
file /etc/init.d/fuse from install of fuse-2.6.5-1.fc7 conflicts with
file from package fuse-2.6.3-2.fc7
file /sbin/mount.fuse from install of fuse-2.6.5-1.fc7 conflicts with
file from package fuse-2.6.3-2.fc7
$ rpm -qa | grep fuse
* Wed Apr 18 2007 Matthew Barnes <mbarnes(a)redhat.com> - 2.0.15-5.fc7
- Add patch for RH bug #198211 (unresolved symbols in libraries).
- Add autoconf and automake as build requirements, since we now have to
run autoreconf before configure.
* Wed Feb 07 2007 Matthias Clasen <mclasen(a)redhat.com> - 2.0.15-4
- Use desktop-file-install
- Remove invalid category Application, add HardwareSettings
- Other small spec cleanups
I spent some time reading over the anaconda sources this morning, and I think
I located why anaconda is wiping out the LVM it already established when going
to format filesystems.
in packages.py, in hte definition of turnOnFilesystems(), there is no check to
see if the filesystems are active already. In the partitioningComplete()
function there is a check to keep one from going back into the partitioning
step [checking anaconda.id.fsset.isActive()] that seems to be missing from
It should be checked and some of the steps should not be done if isActive()
returns the proper status.
Considering that I'm just learning to read python, this may be too simplistic
an analysis. But it has been educational to read the anaconda sources. My
respect goes to the developers of anaconda for keeping it so clean and
straightforward to read. That is some really impressive code.
Whether running from the liveCD or from the yum installed kernel,
kernel Fedora (2.6.21-1.3194.fc7) freezes after outputing the message
"uncompressing linux kernel" or something like that. I am running 3191
on the same machine. Are there updated kernels in the pipe?
Just tried today's rawhide (anaconda-22.214.171.124-1) and it is still removing
the LVM entries in /dev/mapper just prior to formatting when it has created them
properly for a low memory situation in prior steps.
So...I'm back on the leading edge of rawhide, and life seems mostly
good. Is it just me, though, or is gnucash still broken? It tells me
(on an x86_64 system):
gnucash-bin: error while loading shared libraries: \
libgtkhtml-3.8.so.15: cannot open shared object file: No such file or directory
I have libgtkhtml-3.13 from the gtkhtml3 package - but yum no longer
seems to know about gtkhtml3...
* Fri May 25 2007 Jeremy Katz <katzj(a)redhat.com> - 126.96.36.199-1
- fix dhcp netconfig in DVD-based rescue mode or repo adding (dcantrell)
* Fri Dec 01 2006 Matthew Barnes <mbarnes(a)redhat.com> - 2.0.15-3.fc7
- Remove patch for GNOME bug #362565 (fixed upstream).
* Mon Nov 27 2006 Matthew Barnes <mbarnes(a)redhat.com> - 2.0.15-2.fc7
- Rebuild against pilot-link-0.12.
* Fri Nov 24 2006 Matthew Barnes <mbarnes(a)redhat.com> - 2.0.15-1.fc7
- Update to 2.0.15
* Thu May 24 2007 Mike McGrath <mmcgrath(a)redhat.com> - 0.9.8.1
- Upstream released new version
* Sun Apr 22 2007 Mike McGrath <mmcgrath(a)redhat.com> - 0.9.7.1-3
- Added smolt icons
* Tue Apr 17 2007 Jeffrey C. Ollie <jeff(a)ocjtech.us> - 0.9.6-4
- Add standard scriptlets in pre & post to handle init script - fixes #236776
- Use the find_lang macro to find/mark translations.
RC of the Fedora 7 Live image set (i686, x86_64, i686 KDE and x86_64
KDE) are now available at http://torrent.fedoraproject.org.
Note that the i686 images require an i686 class machine and should be
able to be burned on 700 meg CD images.
The x86_64 images are more intended for DVD media, but brave souls may
get away with the extended CD formats :-)
Thanks for your testing help!