Re: ALSA 1.0.15 update test kernels available
by Chuck Ebbert
On 10/26/2007 03:59 PM, Harald Hoyer wrote:
> Chuck Ebbert wrote:
>> On 10/26/2007 03:20 PM, Harald Hoyer wrote:
>>> kernel-devel .i686 seems to have x86_64 built helper bins in scrpts/*
>>>
>>
>> Which ones? I can't find any.
>>
>
> e.g.
> /lib/modules/2.6.23.1-32.ALSA/build/scripts/basic/fixdep
>
Oh those, I thought you meant the ones from Koji. Those were manually
built on a native x86_64 machine and there's probably something
making it build native instead of for the target arch. The official
ones are okay, though.
16 years, 6 months
How to turn off pulseaudio in rawhide
by stan
I run an app that calls ALSA library functions in order to determine
sound hardware characteristics and set sound hardware characteristics,
in particular the hardware supported frame rates. Since the latest
updates in Rawhide this breaks with the following error message:
*** PULSEAUDIO: Unable to connect: Connection refused
cannot open audio device "default" (Connection refused)
Segmentation fault ( <-- the app generated this)
I tried using the kill command with pulseaudio but it won't get rid of
it. I tried uninstalling pulseaudio, but it still is there. I went to
services to disable it, and it isn't there either. How do I stop it
correctly?
I didn't actually ask to have it run so I'm not sure why it is running.
Can Pulseaudio be configured to allow direct access to ALSA?
Can it be bypassed to directly access ALSA while it is running or does
it monopolize the sound system?
Is this a bug that should be reported upstream?
Will removing pulseaudio cause any breakages in applications? i.e. is
it optional?
Thanks for any clarification and pointers to help.
16 years, 6 months
knotify, aRts output
by Antonio Olivares
While checking emails in yahoo, I got the following
message:
During the previous startup, KNotify crashed while
instantiating KNotify. Do you want to try again or
disable aRts sound output?
If you choose to disable aRts output now, you can
re-enable it later or select an alternate sound player
in the System Notifications control panel.
I clicked on
try again
the first time, but some pages took a while to
respond? Is there something wrong with knotify?
Regards,
Antonio
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
16 years, 6 months
--qf %{license}
by shrek-m@gmx.de
hi,
not a lot of GPLv3 packages.
# rpm -qa --qf "%{license} %{name}\n" | grep -i v3
GPLv3+ cpio
GPLv3+ m4
GPLv3 texinfo
GPLv3 jwhois
GPLv3 info
GPLv3+ binutils
GPLv3 texinfo-tex
"R[edhat]PM Package Manager" and "Yellowdog Updater Modified"
# rpm -qa --qf "%{name} %{license}\n" rpm\* yum\* | sort
rpm-build GPLv2+
rpm GPLv2+
rpm-libs GPLv2+ and LGPLv2+ with exceptions
rpm-python GPLv2+
yum GPLv2+
yum-metadata-parser GPL
--
shrek-m
16 years, 6 months
[yum] ts_done name in te is
by Pat Kane
I did a "sudo yum update kernel" this morning and got the following
msg:
...
Installing: kernel ####################### [ 1/11]
Erasing : xorg-x11-drv-nouveau ####################### [ 2/11]
Cleanup : kernel ####################### [ 3/11]
ts_done name in te is xorg-x11-drivers should be kernel
...
Google on the fedora archives indicate that I should ignore the
harmless error, so I shall. But I happen to like my xorg X11 drivers
and am now worried about their well being...
Pat
---
16 years, 6 months
RHGB doesn't work and no IPV4 at startup
by Paul Dickson
Currently rhgb is not working for me. During boot, the screen blanks like it's trying to start X, but then returns after about 5 seconds. This has been happening for months. This week, when the screen unblanks, I get a few more lines of the boot process then no more output until GDM starts (although the disk activity does continue). I did not see a Xorg.0.log for this.
Also when my system boots, eth0 comes up with only an IPv6 address. I have to ifdown/ifup eth0 to pickup the IPv4 address. If I don't do this before logging in with GDM, gnome-session will lockup (also empty gnome-terminal windows appear). The eth0 is the hardwired network, not wireless.
Any suggestions on debugging these?
-Paul
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
03:01.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
03:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
16 years, 6 months
Re: no kernal after 2.6.23.1-23 boots
by ray goss
It does say something
checking filesystem failed
I think he was refering to the fact that that message
isn't very helpful
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
16 years, 6 months
A couple of annoying F8t3 things
by Rodd Clarkson
I've noticed two annoying issues in f8t3.
1. Applications seems to take quite a while to 'appear' on the desktop.
After clicking an application on the panel (gedit, gnome-terminal, etc)
it takes about 10 secs for them to appear on the desktop.
2. Evolution (particularly compose) seems to 'pause' for 10 seconds or
so every now and then and it becomes unresponsive. Makes typing emails
a pain in the bum (and I've seen it three times in this short email.)
I'm going to bz these, but we wondering if others have seen this too.
R.
--
"It's a fine line between denial and faith.
It's much better on my side"
16 years, 6 months
Miro package broken?
by Neal Becker
sudo yum install Miro
Error: Missing Dependency: firefox = 2.0.0.6 is needed by package Miro
Error: Missing Dependency: firefox = 2.0.0.6 is needed by package gnome-python2-gtkmozembed
16 years, 6 months