(no subject)
by D 4444
okay.. this should be an easy question, but i can not figure this out.
how do i burn the image when i download the fedora core (dvd image).
it is an .iso which nero can read but it says it is of type "ML Disk".
it will not let me burn it what do i need to do to get this on a dvd?
19 years, 1 month
Problem with printer using FC3
by Luya Tshimbalanga
For some reason, I am unable to print even thought the CUPS services work fine. Here what dmesg said:
PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 11 (level, low) -> IRQ 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xac00-0xac07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xac08-0xac0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: WDC WD1200JB-00GVA0, ATA DISK drive
hdb: Maxtor 6E040L0, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: CR-48XATE, ATAPI CD/DVD-ROM drive
hdd: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: Host Protected Area detected.
current capacity is 234439535 sectors (120033 MB)
native capacity is 234441648 sectors (120034 MB)
hda: Host Protected Area disabled.
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 >
hdb: max request size: 128KiB
hdb: Host Protected Area detected.
current capacity is 80291135 sectors (41109 MB)
native capacity is 80293248 sectors (41110 MB)
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: 0x37
hdb: 80291135 sectors (41109 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
hdb: cache flushes supported
hdb: hdb1 hdb2
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 UAR1 ECP1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 160k freed
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel(a)redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
SCSI subsystem initialized
libata version 1.10 loaded.
sata_via version 1.0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 11 (level, low) -> IRQ 11
sata_via(0000:00:0f.0): routed to hard irq line 11
ata1: SATA max UDMA/133 cmd 0x9400 ctl 0x9802 bmdma 0xA400 irq 11
ata2: SATA max UDMA/133 cmd 0x9C00 ctl 0xA002 bmdma 0xA408 irq 11
ata1: no device found (phy stat 00000000)
scsi0 : sata_via
ata2: no device found (phy stat 00000000)
scsi1 : sata_via
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux Tulip driver version 1.1.13 (May 11, 2002)
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1.
tulip0: MII transceiver #2 config 1000 status 786d advertising 05e1.
tulip0: MII transceiver #3 config 1000 status 786d advertising 05e1.
tulip0: MII transceiver #4 config 1000 status 786d advertising 05e1.
divert: allocating divert_blk for eth0
eth0: ADMtek Comet rev 17 at e083c000, 00:04:5A:73:D0:B0, IRQ 11.
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.5 to 64
ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: irq 11, pci mem 0xeb01a000
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 10, io base 0xb000
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 10, io base 0xb400
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: irq 11, io base 0xb800
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: irq 11, io base 0xbc00
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 4-1: new low speed USB device using uhci_hcd and address 2
input: USB HID v1.00 Joystick [SAITEK P880] on usb-0000:00:10.2-1
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03697c0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
usb 5-1: new low speed USB device using uhci_hcd and address 2
usbhid: probe of 5-1:1.0 failed with error -5
usb 2-1.1: new low speed USB device using uhci_hcd and address 4
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:10.0-1.1
usb 2-1.4: new full speed USB device using uhci_hcd and address 5
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
Initializing USB Mass Storage driver...
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
input: Wacom Graphire2 4x5 on usb-0000:00:10.3-1
usbcore: registered new driver wacom
drivers/usb/input/wacom.c: v1.30:USB Wacom Graphire and Wacom Intuos tablet driver
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Vendor: Generic Model: USB Storage-SMC Rev: 0090
Type: Direct-Access ANSI SCSI revision: 00
Vendor: Generic Model: USB Storage-CFC Rev: 0090
Type: Direct-Access ANSI SCSI revision: 00
Vendor: Generic Model: USB Storage-MMC Rev: 0090
Type: Direct-Access ANSI SCSI revision: 00
Vendor: Generic Model: USB Storage-MSC Rev: 0090
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 1
Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 2
Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 3
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
It seems the problem is related to PCI. How should I fix it.
--
_______________________________________________
Get your free email from http://mymail.jp.popstarmail.org
Powered by Outblaze
19 years, 1 month
CUPS problem with OOo2
by Paul F. Johnson
Hi,
If I use OOo2 at work using a Samsung 1510 laser printer, then
everything prints correctly. Using exactly the same document at home and
trying to print on my HP 980cxi causes over printing of some lines. This
is either partial or complete.
If I print using OOo 1.1.3, all is well with the world.
Any ideas?
TTFN
Paul
--
"I like blinking me" - Helen, Big Brother 2 contestant
19 years, 1 month
gcc 4.0 and 3.4 ?
by Justin Conover
This box is fairly new, just had a minimal install a few days ago and
updated to rawhide but haven't had time to do anything else. Anyway,
ran the update to day after I saw Chirstopher announcment for
rebuilding against 4.0, looks like it updated everything and then I
installed the Dev tools and Gnome stuff. Is there going to be a 3.4
compat version? I know I'm early, just curious.
http://christopher.aillon.org/blog/
# gcc -v
Using built-in specs.
Target: i386-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man
--infodir=/usr/share/info --enable-shared --enable-threads=posix
--enable-checking=release --with-system-zlib --enable-__cxa_atexit
--disable-libunwind-exceptions
--enable-languages=c,c++,objc,java,f95,ada --enable-java-awt=gtk
--host=i386-redhat-linuxThread model: posix
gcc version 4.0.0 20050228 (Red Hat 4.0.0-0.30)
# rpm -qa | grep gcc
gcc-4.0.0-0.30
libgcc-4.0.0-0.30
gcc-c++-4.0.0-0.30
gcc-java-4.0.0-0.30
# yum list | grep gcc
gcc.i386 4.0.0-0.30 installed
gcc-c++.i386 4.0.0-0.30 installed
gcc-java.i386 4.0.0-0.30 installed
libgcc.i386 4.0.0-0.30 installed
compat-gcc.i386 8-3.3.4.2 development
compat-gcc-c++.i386 8-3.3.4.2 development
compat-gcc-debuginfo.i386 8-3.3.4.2 development
compat-gcc-g77.i386 8-3.3.4.2 development
compat-gcc-java.i386 8-3.3.4.2 development
compat-gcc-objc.i386 8-3.3.4.2 development
gcc-debuginfo.i386 4.0.0-0.30 development
gcc-gfortran.i386 4.0.0-0.30 development
gcc-gnat.i386 4.0.0-0.30 development
gcc-objc.i386 4.0.0-0.30 development
19 years, 1 month
Fedora Core 3 Test Update: glibc-2.3.4-2.fc3.4
by Jakub Jelinek
---------------------------------------------------------------------
Fedora Test Update Notification
FEDORA-2005-191
2005-03-04
---------------------------------------------------------------------
Product : Fedora Core 3
Name : glibc
Version : 2.3.4
Release : 2.fc3.4
Summary : The GNU libc libraries.
Description :
The glibc package contains standard libraries which are used by
multiple programs on the system. In order to save disk space and
memory, as well as to make upgrading easier, common system code is
kept in one place and shared between programs. This particular package
contains the most important sets of shared libraries: the standard C
library and the standard math library. Without these two libraries, a
Linux system will not function.
---------------------------------------------------------------------
Update Information:
The dlclose fix is in very tricky code, so I'd appreciate as
much testing as possible, especially with applications that use
dlopen/dlclose a lot with lots of libraries with complicated
dependencies. Thanks.
---------------------------------------------------------------------
* Thu Mar 3 2005 Jakub Jelinek <jakub(a)redhat.com> 2.3.4-2.fc3.4
- fix dlclose (#145810)
- clear padding in gconv-modules.cache (#146614, BZ#776)
---------------------------------------------------------------------
This update can be downloaded from:
http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/3/
5720616f86a028fbbbc593a09968793f SRPMS/glibc-2.3.4-2.fc3.4.src.rpm
31c5f0cfee20b42a054b6acf7e41e377 x86_64/glibc-2.3.4-2.fc3.4.x86_64.rpm
6a88b8bdc0bce83889ca6b89dfc2f0ad x86_64/glibc-devel-2.3.4-2.fc3.4.x86_64.rpm
c9550baba9ad90eb36de2d321014873f x86_64/glibc-headers-2.3.4-2.fc3.4.x86_64.rpm
ddec3ae0210771cb7a0ed311fd3124cf x86_64/nptl-devel-2.3.4-2.fc3.4.x86_64.rpm
ad7e535fc83c2361f5f7a93b97e09967 x86_64/glibc-profile-2.3.4-2.fc3.4.x86_64.rpm
9e9052adcc2f570764e5bceddcc6883a x86_64/glibc-common-2.3.4-2.fc3.4.x86_64.rpm
1bb1fd5599d8fead09c33e6748910965 x86_64/nscd-2.3.4-2.fc3.4.x86_64.rpm
be9e4e09ba4d24ea138b3f370995b981 x86_64/glibc-utils-2.3.4-2.fc3.4.x86_64.rpm
dd3e29cfdba7ef51ed10f6657643ae14 x86_64/debug/glibc-debuginfo-2.3.4-2.fc3.4.x86_64.rpm
99bff0b7128fc0d93d9161e9bf426af1 x86_64/glibc-2.3.4-2.fc3.4.i386.rpm
0b66482b13557c1c2f87979e15e571e7 x86_64/glibc-devel-2.3.4-2.fc3.4.i386.rpm
21936e9bc54014cefc712c5491b02d11 x86_64/glibc-2.3.4-2.fc3.4.i686.rpm
99bff0b7128fc0d93d9161e9bf426af1 i386/glibc-2.3.4-2.fc3.4.i386.rpm
0b66482b13557c1c2f87979e15e571e7 i386/glibc-devel-2.3.4-2.fc3.4.i386.rpm
dc4dec1bff5cfc2ca8b45517ef4915ea i386/glibc-headers-2.3.4-2.fc3.4.i386.rpm
96c55304779e87e01d72dd4a997f3631 i386/nptl-devel-2.3.4-2.fc3.4.i386.rpm
e048db375522bb4e07468c8a9e7aa4f0 i386/glibc-profile-2.3.4-2.fc3.4.i386.rpm
cd1e57168c9574875f273d2fb68f6003 i386/glibc-common-2.3.4-2.fc3.4.i386.rpm
0b2c7b1a6ca84293175151b4642e73e6 i386/nscd-2.3.4-2.fc3.4.i386.rpm
0f91de02a1a52adb0bd07bf2426eb3f6 i386/glibc-utils-2.3.4-2.fc3.4.i386.rpm
700e945008b80bbe2adffe2d9b6b543c i386/debug/glibc-debuginfo-2.3.4-2.fc3.4.i386.rpm
dfbc4754edc6b800644dbb07dc7d4212 i386/debug/glibc-debuginfo-common-2.3.4-2.fc3.4.i386.rpm
21936e9bc54014cefc712c5491b02d11 i386/glibc-2.3.4-2.fc3.4.i686.rpm
b4d87ddf23a3e21d5e50bd6928a0d5ad i386/nptl-devel-2.3.4-2.fc3.4.i686.rpm
3db9c8941ae46cd42f00786448a17aa2 i386/debug/glibc-debuginfo-2.3.4-2.fc3.4.i686.rpm
This update can also be installed with the Update Agent; you can
launch the Update Agent with the 'up2date' command. You may
need to edit your up2date channels configuration. Within
/etc/sysconfig/rhn/sources enable the following line:
yum updates-testing http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/3...
---------------------------------------------------------------------
19 years, 1 month
Last two kernels - address but no access to web
by Jim Cornette
After installing the last two kenels from rawhide. I could not access
the internet.
kernel-2.6.11-1.1166_FC4 and 1162 would aquire an address from my
router, but would fail for pop and http.
I was getting the 192.168.x.x address without problems.
Would this be related to a program external to the kernel, protocol or
what? I tried dhclient and it did not seem to help with resolving the
connection problem.
Jim
Junk from logs related to 1162, 1166 and eth0.
Mar 3 06:35:19 cornette-fc3-lt kernel: Linux version 2.6.10-1.1162_FC4
(bhcompile(a)bugs.build.redhat.com) (gcc version 4.0.0 20050228 (Red Hat
4.0.0-0.30)) #1 Tue Mar 1 08:06:42 EST 2005
Mar 3 17:27:55 cornette-fc3-lt kernel: Linux version 2.6.10-1.1162_FC4
(bhcompile(a)bugs.build.redhat.com) (gcc version 4.0.0 20050228 (Red Hat
4.0.0-0.30)) #1 Tue Mar 1 08:06:42 EST 2005
Mar 3 19:49:46 cornette-fc3-lt kernel: Linux version 2.6.11-1.1166_FC4
(bhcompile(a)porky.build.redhat.com) (gcc version 4.0.0 20050228 (Red Hat
4.0.0-0.30)) #1 Wed Mar 2 13:57:44 EST 2005
Mar 3 06:35:23 cornette-fc3-lt kernel: natsemi eth0: NatSemi DP8381[56]
at 0xd0008000 (0000:00:12.0), 00:0b:cd:34:b0:16, IRQ 11, port TP.
Mar 3 06:35:24 cornette-fc3-lt kernel: eth0: DSPCFG accepted after 0 usec.
Mar 3 06:35:24 cornette-fc3-lt kernel: eth0: link up.
Mar 3 06:42:59 cornette-fc3-lt dhclient: Listening on
LPF/eth0/00:0b:cd:34:b0:16
Mar 3 06:42:59 cornette-fc3-lt dhclient: Sending on
LPF/eth0/00:0b:cd:34:b0:16
Mar 3 06:43:00 cornette-fc3-lt dhclient: DHCPDISCOVER on eth0 to
255.255.255.255 port 67 interval 8
Mar 3 06:43:00 cornette-fc3-lt dhclient: DHCPREQUEST on eth0 to
255.255.255.255 port 67
Mar 3 06:45:27 cornette-fc3-lt kernel: natsemi eth0: NatSemi DP8381[56]
at 0xd0008000 (0000
19 years, 1 month
kde 3.4rc1 working?
by Lars G
hello
anyone have the kde 3.4rc1 update from rawhide working?
for me there are a lot of problems, like windows not refreshing, konqueror
constantly crashing, windows snap to the left when dragged and stick there,
etc. etc.
had to downgrade qt to see something from the gui at all.
basically its unusable for me at this time.
maybe this comes from the transition to gcc-4.
would like to hear if this is the behaviour for others too.
cheers
lars
19 years, 1 month
Fedora Core 2 Update: tzdata-2005f-1.fc2
by Jakub Jelinek
---------------------------------------------------------------------
Fedora Update Notification
FEDORA-2005-190
2005-03-03
---------------------------------------------------------------------
Product : Fedora Core 2
Name : tzdata
Version : 2005f
Release : 1.fc2
Summary : Timezone data
Description :
This package contains data files with rules for various timezones around
the world.
---------------------------------------------------------------------
* Tue Mar 1 2005 Jakub Jelinek <jakub(a)redhat.com> 2005f-1.fc2
- 2005f
- more updates for Israel, updates for Azerbaijan
---------------------------------------------------------------------
This update can be downloaded from:
http://download.fedora.redhat.com/pub/fedora/linux/core/updates/2/
36ddd78b68eebab6de163ca23edf026e SRPMS/tzdata-2005f-1.fc2.src.rpm
d3283574363a753202cf517bc9e26cad x86_64/tzdata-2005f-1.fc2.noarch.rpm
d3283574363a753202cf517bc9e26cad i386/tzdata-2005f-1.fc2.noarch.rpm
This update can also be installed with the Update Agent; you can
launch the Update Agent with the 'up2date' command.
---------------------------------------------------------------------
19 years, 1 month
Fedora Core 3 Update: tzdata-2005f-1.fc3
by Jakub Jelinek
---------------------------------------------------------------------
Fedora Update Notification
FEDORA-2005-189
2005-03-03
---------------------------------------------------------------------
Product : Fedora Core 3
Name : tzdata
Version : 2005f
Release : 1.fc3
Summary : Timezone data
Description :
This package contains data files with rules for various timezones around
the world.
---------------------------------------------------------------------
* Tue Mar 1 2005 Jakub Jelinek <jakub(a)redhat.com> 2005f-1.fc3
- 2005f
- more updates for Israel, updates for Azerbaijan
---------------------------------------------------------------------
This update can be downloaded from:
http://download.fedora.redhat.com/pub/fedora/linux/core/updates/3/
a07273a4bf0adf7e47b834d46fcd9c57 SRPMS/tzdata-2005f-1.fc3.src.rpm
085b5652b4e2ccf74b80858d174534e2 x86_64/tzdata-2005f-1.fc3.noarch.rpm
085b5652b4e2ccf74b80858d174534e2 i386/tzdata-2005f-1.fc3.noarch.rpm
This update can also be installed with the Update Agent; you can
launch the Update Agent with the 'up2date' command.
---------------------------------------------------------------------
19 years, 1 month