test October 2004

test@lists.fedoraproject.org

421 participants
682 discussions

Soundcard detected but no sound... continued
by Darek Borkowski 01 Nov '04

01 Nov '04

Hi, as written before I have FC3test2 ugraded everyday. Soundcard detected but no sound even with newest kernel and other packages. Below are some debugging info from my Laptop (Toshiba Sattelite 1135-S1554 Darek Borkowski ================================= [root@kapsel ~]# system-config-soundcard Simple mixer control 'PCM',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 23 [74%] [on] Front Right: Playback 23 [74%] [on] Playing WAVE '/usr/share/system-config-soundcard/sound-sample.wav' : Signed 16 b it Little Endian, Rate 44100 Hz, Stereo aplay: pcm_write:1115: write error: Input/output error [root@kapsel ~]# uname -r 2.6.9-1.649 [root@kapsel ~]# lsmod Module Size Used by i915 76869 3 parport_pc 24705 1 lp 11565 0 parport 41737 2 parport_pc,lp autofs4 24005 0 i2c_dev 10433 0 i2c_core 22081 1 i2c_dev sunrpc 160421 1 orinoco_cs 9545 1 orinoco 47053 1 orinoco_cs hermes 7617 2 orinoco_cs,orinoco ds 16965 7 orinoco_cs dm_mod 54741 0 button 6481 0 battery 8517 0 ac 4805 0 yenta_socket 18753 1 pcmcia_core 59913 3 orinoco_cs,ds,yenta_socket uhci_hcd 31449 0 ehci_hcd 31557 0 snd_intel8x0m 18185 0 snd_intel8x0 34829 2 snd_ac97_codec 64401 2 snd_intel8x0m,snd_intel8x0 snd_pcm_oss 47609 0 snd_mixer_oss 17217 2 snd_pcm_oss snd_pcm 97993 3 snd_intel8x0m,snd_intel8x0,snd_pcm_oss snd_timer 29765 1 snd_pcm snd_page_alloc 9673 3 snd_intel8x0m,snd_intel8x0,snd_pcm gameport 4801 1 snd_intel8x0 snd_mpu401_uart 8769 1 snd_intel8x0 snd_rawmidi 26725 1 snd_mpu401_uart snd_seq_device 8137 1 snd_rawmidi snd 54053 12 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 9889 2 snd 8139too 26305 0 mii 4673 1 8139too ext3 116809 2 jbd 74969 1 ext3 [root@kapsel ~]# lspci '00:00.0 Host bridge: Intel Corp. 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 01) 00:00.1 System peripheral: Intel Corp. 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 01) 00:00.3 System peripheral: Intel Corp. 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 01) 00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 01) 00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 01) 00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corp. 82801 Mobile PCI Bridge (rev 83) 00:1f.0 ISA bridge: Intel Corp. 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) 00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4-M) IDE Controller (rev 03) 00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) 00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) 02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:02.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01) 02:04.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01) 02:04.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01)

3 3

Having constantly errors burning CD 3 & 4 of RC3
by Peter Boy 01 Nov '04

01 Nov '04

I'm unable to burn CD 3 & 4 of RC3 (i386) so that is passes the media check process. I used 6 diferent media and 2 different burners, all without success. MD4sum is OK for the downloaded files. Does anyone else have this prob or did I miss some previous posts? Peter

7 11

IPv6
by Maciej Żenczykowski 31 Oct '04

31 Oct '04

Just a quick idea. It would probably be useful to include a global 'disable/enable IPv6' option in the installer. Having IPv6 enabled causes Mozilla DNS lookups to take ages in some areas - depends on DNS servers involved (basically it has to wait for IPv6 resolution to timeout). This can be achieved by 'alias net-pf-10 off' in /etc/modprobe.conf or by physically removing the IPv6 addresses from the interfaces (ip addr del ::1/128 dev lo; ip addr del <something> dev eth0;) Comments? Cheers, MaZe.

3 5

Please romove from mailing
by sml52765＠comcast.net 31 Oct '04

31 Oct '04

Please remove me from the mailing list

2 1

Nvidia Riva 128
by Phil Savoie 31 Oct '04

31 Oct '04

Hi All, I have an old dell Dimension XPS R400 using the Riva 128 nvidia video built-in card. I can't seem to get FC3T3 to properly configure the video. It says that it can't find any screens and to be honest, I don't know where to look to find how to configure the video. Any help would be really appreciated. Thank you, Phil

2 1

kernel provide 2.6.9. Too bad.
by Féliciano Matias 31 Oct '04

31 Oct '04

Here is the problem : # rpm -q kernel kernel-2.6.9-1.643.mat.1 kernel-2.6.9-1.649.mat.1 # rpm -q --provides kernel kernel-drm = 4.3.0 kernel = 2.6.9-1.643.mat.1 kernel-drm = 4.3.0 kernel = 2.6.9-1.649.mat.1 # rpm -q --requires -p kernel-module-unicorn-atm-0.8.7-mat.1_2.6.9_1.649.i686.rpm /bin/sh /sbin/depmod kernel = 2.6.9-1.649 rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 # rpm -i kernel-module-unicorn-atm-0.8.7-mat.1_2.6.9_1.649.i686.rpm error: Failed dependencies: kernel = 2.6.9-1.649 is needed by kernel-module-unicorn-atm-0.8.7-mat.1_2.6.9_1.649.i686 This "error", is normal. Install the "right" packages : # rpm -i --fileconflicts(*) kernel-module-unicorn-atm-0.8.7-mat.1_2.6.9_1.643.mat.1.i686.rpm # rpm -i --fileconflicts(*) kernel-module-unicorn-atm-0.8.7-mat.1_2.6.9_1.649.mat.1.i686.rpm Try to remove a kernel (2.6.9-1.643.mat.1) # rpm -e kernel-2.6.9-1.643.mat.1 error: Failed dependencies: kernel = 2.6.9-1.643.mat.1 is needed by (installed) kernel-module-unicorn-atm-0.8.7-mat.1_2.6.9_1.643.mat.1.i686 This "error", is normal. Add kernel-2.6.9-1.649 # rpm -i --fileconflicts(*) --oldpackage kernel-2.6.9-1.649.i686.rpm Fine. Try to remove a kernel (2.6.9-1.643.mat.1) again # rpm -e kernel-2.6.9-1.643.mat.1 No error ! # find /lib/modules/2.6.9-1.643.mat.1/ -type f /lib/modules/2.6.9-1.643.mat.1/kernel/extra/unicorn_pci_atm.ko # rpm -q --provides kernel-2.6.9-1.649 kernel = 2.6.9 <===== Why ? kernel-drm = 4.3.0 kernel = 2.6.9-1.649 Can you please remove "Provides: kernel = %{version}" from the kernel .spec file ? Should I file this in bugzilla ? (*) : Errr

3 7

cdrecord not working
by Arangel Angov 31 Oct '04

31 Oct '04

Using FC3rc1. I get this: cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2). cdrecord: WARNING: This causes a high risk for buffer underruns. cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler cdrecord: Permission denied. WARNING: Cannot set priority using setpriority(). cdrecord: WARNING: This causes a high risk for buffer underruns. scsidev: '/dev/cdwriter1' devname: '/dev/cdwriter1' scsibus: -2 target: -2 lun: -2 After this it just sits like that, I updated the package a while ago just after it was avilable on up2date but it's still the same.

2 1

Megaraid boot, RAID drive recognition problems
by Richard L. Goerwitz III 31 Oct '04

31 Oct '04

The 'megaraid' RAID drive recognition problem hasn't yet been fixed, but I wonder: Has anyone thought of a workaround yet? http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=135484 -- Richard Goerwitz richard(a)Goerwitz.COM tel: 507 645 7015

1 0

FC3rc5 x86_64 probs: 3w-9xxx and vesa
by Jurgen Kramer 31 Oct '04

31 Oct '04

I just tried the x86_64 version of FC3rc5. The installation went really smooth but after rebooting I could not get I normal graphical screen. The screen appeared blurry (wrong res. or video memory region), this was with the VESA driver. I had to use VESA because the nv driver doesn't support my 6600GT. The vesa driver works perfectly under FC2. Another problem is related to the 3ware 9xxx driver. It gives out 3w-9xxx: scsi0: ERROR: (0x03:0x0104): SGL entry has illegal length:address=0x355D3000, length=0xFF, cmd=X. errors. This does not happen with a kernel.org kernel. Jurgen --

1 0

RC5: Dependencies everywhere!
by Rodolfo J. Paiz 31 Oct '04

31 Oct '04

Hey: I seem to have some trouble burning recent Fedora CD's; I wonder if this is a holdover from that kernel thing recently. I can get them to burn well, but only at 2x whereas I've burned on this machine at 8x for over two years now. Installing my old test box (PPro/200, 64MB, 4GB) with FC1 booting from floppy, then using GRUB to boot into the FC3-RC5 install and doing an FTP install from a server on the LAN worked well. No hitches. Since I am only doing a minimal install on this box right now, there are many things which I cannot really test yet. 1. What happened to isdn4k-utils? Used to be around 3.5MB, now installed it takes up over 9MB. Package size hasn't changed much, so I don't understand what happened. 2. Why does rhpl require the synaptics driver? I would like to get rid of all the graphical stuff on the minimal install, but rhpl requires synaptics and a whole bunch of stuff requires rhpl. So in order to lose some GUI packages, I have to lose up2date! And unless I lose up2date, I have to keep about 20MB of stuff I don't need on a minimal install. Can this dependency be eliminated somehow? Please? 3. Despite having *not* selected "Printing" packages during the install, cups and a bunch of stuff is pulled in since it depends on fontconfig, which depends on xorg-x11-libs, which needs synaptics, which again needs rhpl which needs up2date. There is a *LOT* of stuff here which cannot be deleted easily, and I don't understand why these dependencies are there. Why, to delete cups, do I end up having to delete up2date again? 4. If anyone just happens to have the chance to save me from a reinstall on this old box, could I get the output from a "df" command and a "rpm -qa | wc -l" command immediately after first booting a minimal install? I forgot to write that data down for the HOWTO, and I'm going to need it. If no one happens to get it, then I'll have to reinstall this box just to be sure. Cheers, -- Rodolfo J. Paiz <rpaiz(a)simpaticus.com>

3 4

← Newer
1
2
3
4
5
6
7
...
69
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test October 2004