alsa and no sound
by Mike
Hi
I am probably gonna sound stupid here, but here goes
I have compiled alsa in a freshly minted test2 kernel with oss emulation
for my cs4237B based soundcard.
after modprobing snd-cs4236 everything appears to work but no sound
to whit
sound mixer starts up fine (everything on max)
xmms appears to play
no errors in dmesg or /var/log/messages
my /proc/asound/oss/sndstat is
Sound Driver:3.8.1a-980706 (ALSA v0.9.4 emulation code)
Kernel: Linux localhost 2.6.0-test2_scheda #1 Fri Aug 1 02:44:31 BST
2003 i586
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
CS4237B at 0x534, irq 9, dma 1&3
Audio devices:
0: CS4237B (DUPLEX)
Synth devices: NOT ENABLED IN CONFIG
Midi devices:
0: MPU-401 (UART) 0-0
Timers:
7: system timer
Mixers:
0: CS4237B
my /proc/asound/alsa/oss/devices is
2: [0- 2]: raw midi
10: [0-10]: hardware dependent
0: [0- 0]: mixer
3: [0- 3]: digital audio
/etc/modprobe.conf contains
include /etc/modprobe.conf.dist
alias eth0 8139too
alias char-major-14 soundcore
alias char-major-14 sound
alias char-major-14-6 sndstat
alias char-major-10-1 mousedev
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
any help appreciated
20 years, 8 months
XFConfig mouse problem with 2.6.0-test2 running under severn
by avb
Hi,
I've installed Severn on an Athlon XP and then the
kernel-2.6.0-0.test2.1.28.athlon.rpm with "rpm -i". Reboot, choose the
2.6 kernel, and when trying to enter level 5, there was a problem with
XFConfig.
Apparently, the mouse, which was automatically configured during
installation, is not found by the system when booting with 2.6 kernel.
When the system tries to configure Xfree from a fresh setup, it fails
with same arguments.
I have tested it with 3 combinations:
(1) A ps/2 mouse plugged alone.
(2) A USB wacom volito plugged alone.
(3) Both plugged.
All the combinations work will the 2.4 kernel, which is
2.4.21-20.1.2024.2.1.nptl (it detects the AMD cpu and installs the
athlon version of the kernel, which didn't happen with redhat 9).
I append the XFree86.0.log file,
P.D.: Btw, what does the "nptl" tag of the kernel means?
20 years, 8 months
Complete hang on hd check
by guran
Hi
When rebooting one of my partitions had been initiated 24 times without a
check so it was set out -> complete hang, had to do a hard reset.
Rebooted into Severn again and got the same hang => did the check in another
installation.
regards
guran
--
Red Hat Linux Beta 9.0.93 kernel-2.4.21-20.1.2024.2.1.nptl
Only in a society that has 'a priori' defined what is true
can the result from the evolution of life be defined false.
20 years, 8 months
NTP: ntpdate: Server dropped: strata too high
by Felipe Alfaro Solana
I have just set up an NTP server on a Taroon Beta 1 machine. The NTP
server seems to be running, but when trying to do an "ntpdate" against
it, the client receives the following error:
teapot:~# ntpdate -d glass
1 Aug 17:22:18 ntpdate[7453]: ntpdate 4.1.1c-rc2(a)1.866 Tue Jul 1
09:35:22 EDT 2003 (1)
transmit(192.168.0.2)
receive(192.168.0.2)
transmit(192.168.0.2)
receive(192.168.0.2)
transmit(192.168.0.2)
receive(192.168.0.2)
transmit(192.168.0.2)
receive(192.168.0.2)
transmit(192.168.0.2)
192.168.0.2: Server dropped: strata too high
server 192.168.0.2, port 123
stratum 16, precision -16, leap 11, trust 000
refid [0.0.0.0], delay 0.02579, dispersion 0.00000
transmitted 4, in filter 4
reference time: 00000000.00000000 Thu, Feb 7 2036 7:28:16.000
originate timestamp: c2d5042b.84226809 Fri, Aug 1 2003 17:22:19.516
transmit timestamp: c2d5042a.fa702a34 Fri, Aug 1 2003 17:22:18.978
filter delay: 0.02591 0.02579 0.02579 0.02580
0.00000 0.00000 0.00000 0.00000
filter offset: 0.537794 0.537777 0.537770 0.537781
0.000000 0.000000 0.000000 0.000000
delay 0.02579, dispersion 0.00000
offset 0.537777
1 Aug 17:22:18 ntpdate[7453]: no server suitable for synchronization
found
This is my "ntp.conf" file:
driftfile /etc/ntp/data/drift
broadcastdelay 0.008
server ntp1.curie.fr
server ntp2.curie.fr
server ntp3.curie.fr
server time.nist.gov
server clock.redhat.com
Why does my NTP server assigns itself an stratum of 16, instead of an
stratum of 2 (since all the assigned NTP servers have an stratum of 1)?
I'm out of game with this.
Thanks!
20 years, 8 months
Re: Dependencies [was Re: bugs, bugs, bugs!]
by Leonard den Ottolander
Hello Russ,
> > # dependencies
> Hello -- I see the (implicit) copyright, but no license. Is
> it GPL v.2? if so, or whatever license
LGPL version 2.1. This entitles you to redistribute copies under the
GPL according to paragraph 3.
Bye,
Leonard.
--
How clean is a war when you shoot around nukelar waste?
Stop the use of depleted uranium ammo!
End all weapons of mass destruction.
20 years, 8 months
Printer installation pb
by guran
Hi
I have a windows printer 'daisy-chained' to/through my old 100 MB Zip drive,
it is a HP 710C.
The printer had to be installed manually through 'Printer configuration' after
installation.
The installation went nicely, and last I was asked to print a test page. As I
live in Sweden I want A4 paper, but the default setup was not corrected for
my 'timezone' but printed in US letter.
The installation should notice the user that the initial test page is for US
letter and advice him to first use Edit and change the settings.
regards
guran
--
Red Hat Linux Beta 9.0.93 kernel-2.4.21-20.1.2024.2.1.nptl
Only in a society that has 'a priori' defined what is true
can the result from the evolution of life be defined false.
20 years, 8 months
unsubscibe
by Eric Daniel Botton
GET ME OFF YOUR LIST NOW!
I didn't know I would get over 400 emails per week!
stop
Stop
STOP!
20 years, 8 months