If you are not interested in content of this message please kindly reply it with subject "UNSUBSCRIBE"
FOR CONTACT DETAILS www.ship-owner.com
Please Re-Send it to Technical Dephartment
GENERAL ELECTRIC LM2500 GAS TURBINES VERY LOW RUNNING HOURS 22.2 MW 3 PCS AVAILABLE
MTU 20V 1163 6700 KW 1260 RPM YEAR OF BUILD 1998 4 PCS AVAILABLE VERY LOW RUNNING HOURS
MTU 16V 595 YEAR OF BUILD 1998 2 PCS AVAILABLE VERY LOW RUNNING HOURS
MTU 12V 396 MARINE ENGINES 1000KW 1800 RPM
MTU 12V 2000 ALL MAJOR SPARES
WARTSILA NOHAB 12V25 MAIN ENGINES 3 PCS AND COMPLETE SPARE PARTS
2 PCS WARTSILA 8R46 MARINE MAIN PROPULSION ENGINES / 7250 KW AT 500 RPM ( 1992 BUILT BUT NEVER USED)
2 PCS WARTSILA 6R46 MARINE MAIN PROPULSION ENGINES/ 5430 KW AT 500 RPM ( 1992 BUILT BUT NEVER USED)
4 UNITS WARTSILA 8R32 GEN SET COMPLETE /2960 KW AT 720 RPM -6600 V-60HZ-3552KVA (1992 BUILT BUT NEVER USED)
WARTSILA 4R22HF 590 KW 1000 RPM ENGINE
Wartsila 12V32 1985 Year of Build 5500 hp 800 rpm
WARTSILA 26 ONE PCS COMPLETE CYL HEAD - CON ROD AND PISTON
MAK 8M453 AK COMPLETE MAIN ENGINE WITH GEAR BOX 3000 HP 600 RPM 1980 YEAR OF BUILD
MAK 9M 453 AK COMPLETE MAIN ENGINE
MAK 6M 453 AK COMPLETE MAIN ENGINE
MAK 9M 453 AK CRANKSHAFT
MAK 9M 551 AK MAIN ENGINE
MAK 9M 452AK Main Engine 2300 PS 450 RPM
MAK 453 AK CYL HEAD - PISTON - LINER - CON ROD - FUEL PUMP AND OTHER SPARES
MAK 551 AK CYL HEAD - LINER - CONROD - PISTON
MAK 451 AK - 452 AK SPARE PARTS
MAK 8M 551 AK CRANKSHAFT AND BED PLATE
MAK 601 AK CYL HEAD - PISTON - LINER - CON ROD AND OTHER SPARES
MAK 6M601 AK CRANKSHAFT + BEDPLATE
MAK 8M601 AK CRANKSHAFT + BEDPLATE
DEUTZ 12M540 MAIN ENGINE 5699HP 600 RPM
DEUTZ BV 12M 628 GENSET 2225 KVA 60 HZ/720 RPM 440V
DEUTZ 6M540 MAIN ENGINES
DEUTZ RBV 6M 545 MAIN ENGINE and Spare Parts
Deutz RBV 8M545 Main Engine 1320 HP 380 RPM X 3 PCS
DEUTZ 16M 816 1800HP 1800 RPM WITH GEAR BOX 2 PCS
DEUTZ SBV 6M 628 1276 KW 900 RPM 1993 BUILD
DEUTZ SBV 8M 628 MAIN ENGINE 2 PCS 1632 HP 1200 KW 900 RPM
DEUTZ 12M 816 MARINE DIESEL ENGINE
Deutz BF6M716 Marine Genset 296 KW 1500 RPM
DEUTZ 358 PISTON - LINER - CYL HEAD ETC..
DEUTZ 6M 358 USED CRANKSHAFT
DEUTZ 8M 540 CRANKSHAFT STD
DEUTZ 540 CYL HEAD - PISTON - LINER AND OTHER SPARES
DEUTZ 12M350 FUEL PUMP - 5 PCS COOLED TYPE OF PISTON - 12 PCS COVER - 12 PCS LINER
STORK WERKSPOOR ENGINE AND SPARES
STORK WERKSPOOR 6TM 410 C LL 4000 HP 540 RPM
STORK WERKSPOOR 6TM410 B Main Engine 4000 hp 550 rpm
STORK WERKSPOOR TM410 CYL HEAD - PISTON - CONROD AND ALL OTHER SPARES
STORK WERKSPOOR 6FDHD 240 USED CRANKSHAFT 2PCS STD SIZE
SULZER ENGINE AND SPARES
SULZER 16ZV 40/48 MAIN ENGINE
SULZER 12ASV 25/30 MAIN ENGINES 2 PCS
SULZER 6ASL 25/30 MARINE GENSETS 1100 HP 750 RPM 960 KVA 50 HZ
SULZER 6ZL 40/48 3000 HP 530 RPM Main Engine
SULZER 6AL 25/30 MARINE GENSET Excellent Condition 60 HZ 800 KVA 3 SET AVAILABLE
SULZER NEW 6 ASL 25/30 CYL HEAD COMPLETE:10 PCS
SULZER NEW 6 AL 20/24 CRANK SHAFT :2 PCS
SULZER NEW 8AL 20/24 CRANK SHAFT :1 PC
SULZER NEW 8AL 25 CRANK SHAFT :2 PCS
SULZER NEW AL 20/24 CVYL HEAD /BARE:20 PCS
SULZER NEW AL 20/24 CYL LINER :85 PCS
SULZER 16ZV 40/48 STD SECONDHAND CRANKSHAFT : 1 pc
SULZER 40/48 ALL MAJOR SPARE PARTS PİSTON - LINER - CYL HEAD - CON ROD
Zgoda Sulzer 6-275 A2L Cyl Heads 6 PCS
PIELSTICK ENGINE AND SPARES
PIELSTICK 6PC 2.2 LNR MAIN ENGINES 2 PCS 2208KW 520 RPM
SEMT PIELSTICK 12PC 2.5V MAIN ENGINE 7800 PS 520 RPM
PIELSTICK 12PC 2.5 STD CRANKSHAFT
PIELSTICK PC 2.5 PISTON - LINER - CYL HEAD - CON ROD AND OTHER SPARES
PIELSTICK PC2.6 NEW CYL HEAD 2 PCS
WICHMANN TYPE 5 AX 1250 HP 375 RPM COMPLETE ENGINE
B&W ENGINE AND SPARES
B&W ALPHA 10V 23-U 720 RPM 880 HP
B&W 8T23LH MARINE ENGINES 1240 BHP 825 RPM 1981 YEAR OF BUILD 3 PCS
MAN B&W 6L28/32 GOOD CONDITION GENSET BUILT 1987 1260 KW 720 RPM 1500 KVA 60 HZ
B&W 6S28LH-4 1050 HP 720 RPM Gensets Built 1983
B&W 7L35MC Piston, Liner, Cyl Head , Con Rod
B&W 8L55GFC Secondhand and New Spares Piston, Liner, Cyl Head , Con Rod, and many items....
B&W 50/110 SPARE PARTS
B&W 55GFC- GFCA - 45GF All Major Spare Parts
BERGEN LDMB-9 1575 HP 825 RPM
2PCS BERGEN KVMB16 MAIN ENGINES IN GOOD CONDITION 2200KW 825 RPM
BERGEN LDM9 1435 HP 750 RPM
ALLEN S12DX-BC MARINE GENSETS 2 PCS 720 RPM 708 BHP
NOHAB POLAR ENGINES
Nohab Polar F24R-D750 Marine Genset 800 HP 750 RPM 625 kva - 50 hz
Nohab Polar SF116 VS Main Engine 2400 HP 750 RPM
NOHAB POLAR F212V 1850 HP 750 RPM MARINE ENGINE 2 PCS
NOHAB POLAR F216V MARINE MAIN ENGINE
NOHAB POLAR SF216 - SF212 - SF112 - SF116 COMPLETE SPARE PARTS..
Daihatsu 6DS26-F Main Engine
Daihatsu 6DSb-18AF 900 RPM 470 PS Marine Engines
DAIHATSU 6DSM-26 1912 KW 750 RPM
DAIHATSU 6PSHT b-26D COMPLETE ENGINE
DAIHATSU 6PSHT26D COMPLETE ENGINE
DAIHATSU 6DL-22 MARINE GENSET 1986 YEAR OF BUILD 960 PS 900 RPM 800 KVA 60 HZ
DAIHATSU 6PSHTc 26D GENSET 840 PS 720 RPM 2 PCS
MWM TBD 484-6U COMPLETE ENGINE
MWM TRHS 435 AU SPARE PARTS
MWM TBRHS 345-AU SPARE PARTS
MWM TBD 484-6U COMPLETE MAIN ENGINE
MWM TBD 440 SPARE PARTS FROM 8 CYLINDER ENGINE
MWM D601-D MARINE GENSET 1000 RPM 150 PS 380 V 50 HZ 124 KVA
2 x SKL 8VD 36/24 A-1 Genset
SKL 6NVD 36-1U Main Engine
2 x SKL 6VDS 48/42 Al-2
2 x SKL 6 NVD 48 A2U
SKL 6NVD 36-1U Main Engines 2 CPCS
SKL 6NVD 48-2U 485 KW 428 RPM MARINE ENGINE
SKL 8NVD 48A-2U
CATERPILLAR 3508 B 2002 MODEL MARINE GENSET 60 hz
CATERPILLAR 3512B GENSET 60 HZ 1910 bhp 1300 kw year of manufacure: 2003
CATERPILLAR 3512 MAIN ENGINE 2000 MODEL WITH GEAR BOX MAX. ADV. POWER 968 kW 1298 HP MAX. RATED SPEED 1800 RPM MAX. LOW IDLE SPEED 1450 RPM
CAT 3408 GENSET 50HZ 250KW 1500 RPM 318 KVA 255KW
CAT D399 MAIN ENGINE
MIRRLEES BLACKSTONE K6MAJOR MAIN ENGINE 3300 HP 550 RPM
LISTER BLACKSTONE ESL8 CRANKSHAFT - BEDPLATE - PISTON
MIRLESS BLACK STONE K 8 MAJOR MK2 SPARES CYL HEAD - PISTON - LINER - 2PCS CRANKSHAFT - 2 PCS BEDPLATE
MAN 40/54 BARE CYL HEADS 20 PCS
MAN 30/45 8 PCS PISTON 8 PCS LINER 2 PCS CON ROD AND CRANKSHAFT
MAN KZ60 COVER 6 PCS
MAN KZ78 2 PCS PISTON AND PISTON ROD, LINER
MAN KZ90 LINER AND PISTON
G6 MAN 23.5/33 CRANKSHAFT - 2 PCS PISTON 8 PCS CONROD
MAN 40/54 V8V ENGINE CRANKSHAFT, CYL BLOCKS AND BEDPLATE
Yanmar 6Z-ST 1600HP - 1177KW Main Engine
Yanmar 6KFL Marine Genset 145hp 1200rpm 445volt 120kva 2 pcs
Yanmar 6MAL-HT Marine Engine 360 HP 900 RPM
YANMAR 6UL-ST GENSET
YANMAR 6GL-ST 60 HZ 875 KVA GENSETS GOOD CONDITION 4 PCS
YANMAR 6UL-ST COMPLETE MAIN ENGINE AND SPARES
I am trying to add multiple group members : the wsdl structure is a complex type that looks like this, where the wsdl call accepts 1 or more members. Is there any way to create an array of members ?
addGroupMembers(xs:long id, GroupMembersType member, )
SOAPUI description of WSDL :
<!--1 or more repetitions:-->
I've found a number of methods that don't work :
1 : creating empty list-using factory to create member and append to list : result : suds.WebFault: Server raised fault: '[Server CodecHandler] Failed to decode
-> Found more elements in the soap envelope than required by WSDL
2 : used factory to create member and then attempted to append member : result : Traceback (most recent call last):
File "s7.py", line 28, in ?
member.member.append = "12223334499"
AttributeError: 'str' object has no attribute 'append'
3 : used factory to create 2 members and append 2nd member to first : result : File "s7.py", line 33, in ?
member_array = member_array.append(member)
AttributeError: GroupMembersType instance has no attribute 'append'
Any clue*4s ?
I've been working on getting around the timeout problem I posted earlier. I
thought that my problem was due to using Python 2.4. I've since done some
testing with Python 2.7 and PyPy 1.6. Both of them have the same behavior.
Here's the scenario. I run this line to create the client;
client = Client(wsdl)
I set up the filters to the service that I'm calling so that it will
retrieve a large amount of data. When I run the service it times out after
90 seconds. Next I try creating the client by adding a timeout value.
client = Client(wsdl, timeout=120)
Now the service times out after about 120 seconds. Finally I try this;
client = Client(wsdl, timeout=240)
The service times out at 180 seconds. It doesn't matter what timeout value
I use. Anything above 180 is the same.
I tried setting the default socket value to a large number like this;
After that can look at the socket.getdefaulttimeout() and verify that it's
set to 240. I tried that and then tried to create the client again without
setting the timeout. According to the documentation, not setting the
timeout causes it to use the global default but even if the global default
is 240, the suds timeout is 90.
Is this a bug or am I missing something?
Thank you for the quick response. I should have given more info.
Here is the wsdl file I'm using:
I noticed it has
Does this mean the data is encrypted will it travels over the internet?
On 8/30/2011 8:01 AM, suds-request(a)lists.fedoraproject.org wrote:
> Message: 2
> Date: Mon, 29 Aug 2011 16:04:48 -0800
> From: "Joshua J. Kugler"<joshua(a)eeinternet.com>
> Subject: Re: [Fedora-suds-list] https secure connection
> Content-Type: Text/Plain; charset="iso-8859-1"
> On Monday, August 29, 2011, brian downing elucidated thus:
>> > If I do this:
>> > ---------------------
>> > url ="https://...."
>> > client = suds.client.Client(url)
>> > ---------------------
>> > Will the data be encrypted as it travels over the internet or do I
>> > need to do something different in SUDs?
>> > I want to thank the developers for a great tool. This is my first
>> > experience with SOAP and it has been a really short learning curve.
> Where Suds gets the WSDL file doesn't (usually) have anything to do with
> where it sends the data. The WDSL file usually have the end point in it,
> and thus determines if the end point is HTTPS or not.
> -- Joshua Kugler Part-Time System Admin/Programmer
> http://www.eeinternet.com - Fairbanks, AK PGP Key: http://pgp.mit.edu/
> ID 0x73B13B6A
Brian Downing , Founder
Yakka Design, LLC
Email: brian(a)yakkadesign.com <mailto:email@example.com>
Address: P.O. Box 12562 I Tempe, AZ 85284
Web: www.yakkadesign.com <http://www.yakkadesign.com/>
If I do this:
url = "https://...."
client = suds.client.Client(url)
Will the data be encrypted as it travels over the internet or do I need
to do something different in SUDs?
I want to thank the developers for a great tool. This is my first
experience with SOAP and it has been a really short learning curve.
I've got to apologize and correct some misinformation from my previous
post. I had given up on SUDS and tried to switch to a different library. I
didn't have much luck with that either. I decided that since I had the
source code, I'd try to trace down the "timeout bug" myself. It turns out I
owe the creators an apology. First, the timeout value should work on any of
the supported versions of Python, not just 2.6 and above. In stepping
through the code I found a section that checks for the python version number
and then either uses the urllib2 timeout value or sets the socket default
I found the real problem. In stepping through the code I got a different
error message saying the the M7BROKER timed out after 180 seconds. I
Googled that and the only references are to either MS Query or JDBC. In
other words the "bug" is on the server side. I should have figured that out
earlier since the server program is also new. I don't have access to it at
all but it was replacing a SAP program that would download the data. That
SAP program didn't have a timeout problem so I assumed that the web service
If I had seen that error message I would have probably figured out the
problem a lot sooner. I don't know if it was buried in the log and I just
didn't see it or if SUDS translated it into a generic timeout message. I
tried running it again to see but they fixed the problem on the server so
I'm not getting the timeout message anymore.
Anyway, thanks to the SUDS creators and maintainers. Sorry for wasting
I just hit a bug today while writing some threaded code that uses suds
and I see that a bug report was already filed
(https://fedorahosted.org/suds/ticket/331) over a year ago. The .41
release looks to be about 8 months over due; is it time to migrate my
project to something else?
Never mind. It turns out the timeout value only works if it's supported by
urllib2. They didn't add that support until Python 2.6 and I'm running on
I found something that said that on Python 2.4 you could set the socket
default timeout like this;
I tried that but it didn't work either. Sigh….
To work effective, you must have real s zyi e hds x not less than twice a week
Doctors say, that s va ex ez u ehh al neurosis affects the morale.
If you are a hard-working person, you must have stable s aqm e vj xu qk al life.
It's an established matter, you know...
For example for a score of reasons with your physical fitness you don't have
such possibilitys, we offer you some certified m wh e ybv dic dxl ati pd ons like C pnu ia br l ijz is, L uao ev cnj it gq ra
and well-known V lb i lv ag kql ra.
Visit the si fqg te!...www.medicinewebcam.com.ua