web/conf/proxy/httpd.conf | 1201 ----------------------------------------------
web/conf/proxy/local.conf | 6
web/conf/proxy/proxy.conf | 8
3 files changed, 1215 deletions(-)
New commits:
commit 577d64981ff98f2de6cddff9d7377890756d1e3e
Author: Miroslav Suchý <msuchy(a)redhat.com>
Date: Tue May 4 13:23:19 2010 +0200
code cleanup - this configuration files are not used in proxy
diff --git a/web/conf/proxy/httpd.conf b/web/conf/proxy/httpd.conf
deleted file mode 100644
index 63c7843..0000000
--- a/web/conf/proxy/httpd.conf
+++ /dev/null
@@ -1,1201 +0,0 @@
-##
-## httpd.conf -- Apache HTTP server configuration file
-##
-
-#
-# Based upon the NCSA server configuration files originally by Rob McCool.
-#
-# This is the main Apache server configuration file. It contains the
-# configuration directives that give the server its instructions.
-# See <
URL:http://www.apache.org/docs/> for detailed information about
-# the directives.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do. They're here only as hints or reminders. If you are unsure
-# consult the online docs. You have been warned.
-#
-# After this file is processed, the server will look for and process
-# /usr/conf/srm.conf and then /usr/conf/access.conf
-# unless you have overridden these with ResourceConfig and/or
-# AccessConfig directives here.
-#
-# The configuration directives are grouped into three basic sections:
-# 1. Directives that control the operation of the Apache server process as a
-# whole (the 'global environment').
-# 2. Directives that define the parameters of the 'main' or 'default'
server,
-# which responds to requests that aren't handled by a virtual host.
-# These directives also provide default values for the settings
-# of all virtual hosts.
-# 3. Settings for virtual hosts, which allow Web requests to be sent to
-# different IP addresses or hostnames and have them handled by the
-# same Apache server process.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for
Win32), the
-# server will use that explicit path. If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so
"logs/foo.log"
-# with ServerRoot set to "/usr/local/apache" will be interpreted by the
-# server as "/usr/local/apache/logs/foo.log".
-#
-
-### Section 1: Global Environment
-#
-# The directives in this section affect the overall operation of Apache,
-# such as the number of concurrent requests it can handle or where it
-# can find its configuration files.
-#
-
-#
-# ServerType is either inetd, or standalone. Inetd mode is only supported on
-# Unix platforms.
-#
-ServerType standalone
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# NOTE! If you intend to place this on an NFS (or otherwise network)
-# mounted filesystem then please read the LockFile documentation
-# (available at <
URL:http://www.apache.org/docs/mod/core.html#lockfile>);
-# you will save yourself a lot of trouble.
-#
-# Do NOT add a slash at the end of the directory path.
-#
-ServerRoot "/etc/httpd"
-
-#
-# The LockFile directive sets the path to the lockfile used when Apache
-# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
-# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
-# its default value. The main reason for changing it is if the logs
-# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
-# DISK. The PID of the main server process is automatically appended to
-# the filename.
-#
-LockFile /var/lock/httpd.lock
-
-#
-# PidFile: The file in which the server should record its process
-# identification number when it starts.
-#
-PidFile /var/run/httpd.pid
-
-#
-# ScoreBoardFile: File used to store internal server process information.
-# Not all architectures require this. But if yours does (you'll know because
-# this file will be created when you run Apache) then you *must* ensure that
-# no two invocations of Apache share the same scoreboard file.
-#
-ScoreBoardFile /var/run/httpd.scoreboard
-
-#
-# In the standard configuration, the server will process this file,
-# srm.conf, and access.conf in that order. The latter two files are
-# now distributed empty, as it is recommended that all directives
-# be kept in a single file for simplicity. The commented-out values
-# below are the built-in defaults. You can have the server ignore
-# these files altogether by using "/dev/null" (for Unix) or
-# "nul" (for Win32) for the arguments to the directives.
-#
-#ResourceConfig conf/srm.conf
-#AccessConfig conf/access.conf
-
-#
-# Timeout: The number of seconds before receives and sends time out.
-#
-Timeout 300
-
-#
-# KeepAlive: Whether or not to allow persistent connections (more than
-# one request per connection). Set to "Off" to deactivate.
-#
-KeepAlive On
-
-#
-# MaxKeepAliveRequests: The maximum number of requests to allow
-# during a persistent connection. Set to 0 to allow an unlimited amount.
-# We recommend you leave this number high, for maximum performance.
-#
-MaxKeepAliveRequests 100
-
-#
-# KeepAliveTimeout: Number of seconds to wait for the next request from the
-# same client on the same connection.
-#
-KeepAliveTimeout 15
-
-#
-# Server-pool size regulation. Rather than making you guess how many
-# server processes you need, Apache dynamically adapts to the load it
-# sees --- that is, it tries to maintain enough server processes to
-# handle the current load, plus a few spare servers to handle transient
-# load spikes (e.g., multiple simultaneous requests from a single
-# Netscape browser).
-#
-# It does this by periodically checking how many servers are waiting
-# for a request. If there are fewer than MinSpareServers, it creates
-# a new spare. If there are more than MaxSpareServers, some of the
-# spares die off. The default values are probably OK for most sites.
-#
-MinSpareServers 3
-MaxSpareServers 5
-
-#
-# Number of servers to start initially --- should be a reasonable ballpark
-# figure.
-#
-StartServers 8
-
-#
-# Limit on total number of servers running, i.e., limit on the number
-# of clients who can simultaneously connect --- if this limit is ever
-# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
-# It is intended mainly as a brake to keep a runaway server from taking
-# the system with it as it spirals down...
-#
-MaxClients 40
-
-#
-# MaxRequestsPerChild: the number of requests each child process is
-# allowed to process before the child dies. The child will exit so
-# as to avoid problems after prolonged use when Apache (and maybe the
-# libraries it uses) leak memory or other resources. On most systems, this
-# isn't really needed, but a few (such as Solaris) do have notable leaks
-# in the libraries. For these platforms, set to something like 10000
-# or so; a setting of 0 means unlimited.
-#
-# NOTE: This value does not include keepalive requests after the initial
-# request per connection. For example, if a child process handles
-# an initial request and 10 subsequent "keptalive" requests, it
-# would only count as 1 request towards this limit.
-#
-MaxRequestsPerChild 10000
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, in addition to the default. See also the <VirtualHost>
-# directive.
-#
-#Listen 3000
-#Listen 12.34.56.78:80
-Listen 80
-
-#
-# BindAddress: You can support virtual hosts with this option. This directive
-# is used to tell the server which IP address to listen to. It can either
-# contain "*", an IP address, or a fully qualified Internet domain name.
-# See also the <VirtualHost> and Listen directives.
-#
-#BindAddress *
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Please read the file README.DSO in the Apache 1.3 distribution for more
-# details about the DSO mechanism and run `httpd -l' for the list of already
-# built-in (statically linked and thus always available) modules in your httpd
-# binary.
-#
-# Note: The order is which modules are loaded is important. Don't change
-# the order below without expert advice.
-#
-# Example:
-# LoadModule foo_module modules/mod_foo.so
-
-#LoadModule mmap_static_module modules/mod_mmap_static.so
-LoadModule vhost_alias_module modules/mod_vhost_alias.so
-LoadModule env_module modules/mod_env.so
-LoadModule config_log_module modules/mod_log_config.so
-LoadModule agent_log_module modules/mod_log_agent.so
-LoadModule referer_log_module modules/mod_log_referer.so
-#LoadModule mime_magic_module modules/mod_mime_magic.so
-LoadModule mime_module modules/mod_mime.so
-LoadModule negotiation_module modules/mod_negotiation.so
-LoadModule status_module modules/mod_status.so
-LoadModule info_module modules/mod_info.so
-LoadModule includes_module modules/mod_include.so
-LoadModule autoindex_module modules/mod_autoindex.so
-LoadModule dir_module modules/mod_dir.so
-LoadModule cgi_module modules/mod_cgi.so
-LoadModule asis_module modules/mod_asis.so
-LoadModule imap_module modules/mod_imap.so
-LoadModule action_module modules/mod_actions.so
-#LoadModule speling_module modules/mod_speling.so
-LoadModule userdir_module modules/mod_userdir.so
-LoadModule alias_module modules/mod_alias.so
-#LoadModule rewrite_module modules/mod_rewrite.so
-LoadModule access_module modules/mod_access.so
-LoadModule auth_module modules/mod_auth.so
-LoadModule anon_auth_module modules/mod_auth_anon.so
-#LoadModule db_auth_module modules/mod_auth_db.so
-#LoadModule dbm_auth_module modules/mod_auth_dbm.so
-#LoadModule auth_ldap_module modules/mod_auth_ldap.so
-#LoadModule digest_module modules/mod_digest.so
-#LoadModule proxy_module modules/libproxy.so
-#LoadModule cern_meta_module modules/mod_cern_meta.so
-LoadModule expires_module modules/mod_expires.so
-LoadModule headers_module modules/mod_headers.so
-#LoadModule usertrack_module modules/mod_usertrack.so
-#LoadModule example_module modules/mod_example.so
-#LoadModule unique_id_module modules/mod_unique_id.so
-LoadModule setenvif_module modules/mod_setenvif.so
-#LoadModule bandwidth_module modules/mod_bandwidth.so
-#LoadModule put_module modules/mod_put.so
-#LoadModule throttle_module modules/mod_throttle.so
-#LoadModule define_module modules/mod_define.so
-<IfDefine HAVE_PERL>
-LoadModule perl_module modules/libperl.so
-</IfDefine>
-<IfDefine HAVE_PHP>
-LoadModule php_module modules/mod_php.so
-</IfDefine>
-<IfDefine HAVE_PHP3>
-LoadModule php3_module modules/libphp3.so
-</IfDefine>
-<IfDefine HAVE_PHP4>
-LoadModule php4_module modules/libphp4.so
-</IfDefine>
-<IfDefine HAVE_DAV>
-LoadModule dav_module modules/libdav.so
-</IfDefine>
-<IfDefine HAVE_ROAMING>
-LoadModule roaming_module modules/mod_roaming.so
-</IfDefine>
-<IfDefine HAVE_SSL>
-LoadModule ssl_module modules/libssl.so
-</IfDefine>
-
-# Reconstruction of the complete module list from all available modules
-# (static and shared ones) to achieve correct module execution order.
-# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
-ClearModuleList
-#AddModule mod_mmap_static.c
-AddModule mod_vhost_alias.c
-AddModule mod_env.c
-AddModule mod_log_config.c
-AddModule mod_log_agent.c
-AddModule mod_log_referer.c
-#AddModule mod_mime_magic.c
-AddModule mod_mime.c
-AddModule mod_negotiation.c
-AddModule mod_status.c
-AddModule mod_info.c
-AddModule mod_include.c
-AddModule mod_autoindex.c
-AddModule mod_dir.c
-AddModule mod_cgi.c
-AddModule mod_asis.c
-AddModule mod_imap.c
-AddModule mod_actions.c
-#AddModule mod_speling.c
-AddModule mod_userdir.c
-AddModule mod_alias.c
-#AddModule mod_rewrite.c
-AddModule mod_access.c
-AddModule mod_auth.c
-AddModule mod_auth_anon.c
-#AddModule mod_auth_db.c
-#AddModule mod_digest.c
-#AddModule mod_proxy.c
-#AddModule mod_cern_meta.c
-AddModule mod_expires.c
-AddModule mod_headers.c
-#AddModule mod_usertrack.c
-#AddModule mod_example.c
-#AddModule mod_unique_id.c
-AddModule mod_so.c
-AddModule mod_setenvif.c
-#AddModule mod_bandwidth.c
-#AddModule mod_put.c
-<IfDefine HAVE_PERL>
-AddModule mod_perl.c
-</IfDefine>
-<IfDefine HAVE_PHP>
-AddModule mod_php.c
-</IfDefine>
-<IfDefine HAVE_PHP3>
-AddModule mod_php3.c
-</IfDefine>
-<IfDefine HAVE_PHP4>
-AddModule mod_php4.c
-</IfDefine>
-<IfDefine HAVE_DAV>
-AddModule mod_dav.c
-</IfDefine>
-<IfDefine HAVE_ROAMING>
-AddModule mod_roaming.c
-</IfDefine>
-<IfDefine HAVE_SSL>
-AddModule mod_ssl.c
-</IfDefine>
-
-#
-# ExtendedStatus: controls whether Apache will generate "full" status
-# information (ExtendedStatus On) or just basic information (ExtendedStatus
-# Off) when the "server-status" handler is called. The default is Off.
-#
-#ExtendedStatus On
-
-### Section 2: 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition. These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-#
-# If your ServerType directive (set earlier in the 'Global Environment'
-# section) is set to "inetd", the next few directives don't have any
-# effect since their settings are defined by the inetd configuration.
-# Skip ahead to the ServerAdmin directive.
-#
-
-#
-# Port: The port to which the standalone server listens. For
-# ports < 1023, you will need httpd to be run as root initially.
-#
-Port 80
-
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
-# . On HPUX you may not be able to use shared memory as nobody, and the
-# suggested workaround is to create a user www and use that user.
-# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
-# when the value of (unsigned)Group is above 60000;
-# don't use Group nobody on these systems!
-#
-User apache
-Group apache
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed. This address appears on some server-generated pages, such
-# as error documents.
-#
-ServerAdmin rhn-feedback(a)redhat.com
-
-#
-# ServerName: allows you to set a host name which is sent back to clients for
-# your server if it's different than the one the program would get (i.e., use
-# "www" instead of the host's real name).
-#
-# Note: You cannot just invent host names and hope they work. The name you
-# define here must be a valid DNS name for your host. If you don't understand
-# this, ask your network administrator.
-# If your host doesn't have a registered DNS name, enter its IP address here.
-# You will have to access it by its address (e.g.,
http://123.45.67.89/)
-# anyway, and this will make redirections work in a sensible way.
-#
-ServerName
www.devel.rhns.redhat.com
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/var/www/html"
-
-#
-# Each directory to which Apache has access, can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories).
-#
-# First, we configure the "default" to be a very restrictive set of
-# permissions.
-#
-<Directory />
- Options FollowSymLinks
- AllowOverride None
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory "/var/www/html">
-
-#
-# This may also be "None", "All", or any combination of
"Indexes",
-# "Includes", "FollowSymLinks", "ExecCGI", or
"MultiViews".
-#
-# Note that "MultiViews" must be named *explicitly* --- "Options
All"
-# doesn't give it to you.
-#
- Options Indexes Includes FollowSymLinks
-
-#
-# This controls which options the .htaccess files in directories can
-# override. Can also be "All", or any combination of "Options",
"FileInfo",
-# "AuthConfig", and "Limit"
-#
- AllowOverride None
-
-#
-# Controls who can get stuff from this server.
-#
- Order allow,deny
- Allow from all
-</Directory>
-
-#
-# UserDir: The name of the directory which is appended onto a user's home
-# directory if a ~user request is received.
-#
-# The path to the end user account 'public_html' directory must be
-# accessible to the webserver userid. This usually means that ~userid
-# must have permissions of 711, ~userid/public_html must have permissions
-# of 755, and documents contained therein must be world-readable.
-# Otherwise, the client will only receive a "403 Forbidden" message.
-#
-# See also:
http://httpd.apache.org/docs/misc/FAQ.html#forbidden
-#
-UserDir public_html
-
-#
-# Control access to UserDir directories. The following is an example
-# for a site where these directories are restricted to read-only.
-#
-#<Directory /home/*/public_html>
-# AllowOverride FileInfo AuthConfig Limit
-# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
-# <Limit GET POST OPTIONS PROPFIND>
-# Order allow,deny
-# Allow from all
-# </Limit>
-# <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
-# Order deny,allow
-# Deny from all
-# </Limit>
-#</Directory>
-
-#
-# DirectoryIndex: Name of the file or files to use as a pre-written HTML
-# directory index. Separate multiple entries with spaces.
-#
-DirectoryIndex index.html index.htm index.shtml index.php index.php4 index.php3
index.cgi
-
-#
-# AccessFileName: The name of the file to look for in each directory
-# for access control information.
-#
-AccessFileName .htaccess
-
-#
-# The following lines prevent .htaccess files from being viewed by
-# Web clients. Since .htaccess files often contain authorization
-# information, access is disallowed for security reasons. Comment
-# these lines out if you want Web visitors to see the contents of
-# .htaccess files. If you change the AccessFileName directive above,
-# be sure to make the corresponding changes here.
-#
-# Also, folks tend to use names such as .htpasswd for password
-# files, so this will protect those as well.
-#
-<Files ~ "^\.ht">
- Order allow,deny
- Deny from all
-</Files>
-
-#
-# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
-# document that was negotiated on the basis of content. This asks proxy
-# servers not to cache the document. Uncommenting the following line disables
-# this behavior, and proxies will be allowed to cache the documents.
-#
-#CacheNegotiatedDocs
-
-#
-# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
-# Apache needs to construct a self-referencing URL (a URL that refers back
-# to the server the response is coming from) it will use ServerName and
-# Port to form a "canonical" name. With this setting off, Apache will
-# use the hostname:port that the client supplied, when possible. This
-# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
-#
-UseCanonicalName On
-
-#
-# TypesConfig describes where the mime.types file (or equivalent) is
-# to be found.
-#
-TypesConfig /etc/mime.types
-
-#
-# DefaultType is the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value. If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
-DefaultType text/plain
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type. The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-# mod_mime_magic is not part of the default server (you have to add
-# it yourself with a LoadModule [see the DSO paragraph in the 'Global
-# Environment' section], or recompile the server and include mod_mime_magic
-# as part of the configuration), so it's enclosed in an <IfModule> container.
-# This means that the MIMEMagicFile directive will only be processed if the
-# module is part of the server.
-#
-<IfModule mod_mime_magic.c>
- MIMEMagicFile conf/magic
-</IfModule>
-
-#
-# HostnameLookups: Log the names of clients or just their IP addresses
-# e.g.,
www.apache.org (on) or 204.62.129.132 (off).
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on, since enabling it means that
-# each client request will result in AT LEAST one lookup request to the
-# nameserver.
-#
-HostnameLookups Off
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here. If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog /var/log/httpd/error_log
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-#
-# The following directives define some format nicknames for use with
-# a CustomLog directive (see below).
-#
-LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
\"%{User-Agent}i\"" combined
-LogFormat "%h %l %u %t \"%r\" %>s %b" common
-LogFormat "%{Referer}i -> %U" referer
-LogFormat "%{User-agent}i" agent
-
-#
-# The location and format of the access logfile (Common Logfile Format).
-# If you do not define any access logfiles within a <VirtualHost>
-# container, they will be logged here. Contrariwise, if you *do*
-# define per-<VirtualHost> access logfiles, transactions will be
-# logged therein and *not* in this file.
-#
-# CustomLog /var/log/httpd/access_log common
-CustomLog /var/log/httpd/access_log combined
-
-#
-# If you would like to have agent and referer logfiles, uncomment the
-# following directives.
-#
-#CustomLog /var/log/httpd/referer_log referer
-#CustomLog /var/log/httpd/agent_log agent
-
-#
-# If you prefer a single logfile with access, agent, and referer information
-# (Combined Logfile Format) you can use the following directive.
-#
-#CustomLog /var/log/httpd/access_log combined
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (error documents, FTP directory listings,
-# mod_status and mod_info output etc., but not CGI generated documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of: On | Off | EMail
-#
-ServerSignature On
-
-#
-# Aliases: Add here as many aliases as you need (with no limit). The format is
-# Alias fakename realname
-#
-# Note that if you include a trailing / on fakename then the server will
-# require it to be present in the URL. So "/icons" isn't aliased in this
-# example, only "/icons/"..
-#
-Alias /icons/ "/var/www/icons/"
-
-<Directory "/var/www/icons">
- Options Indexes MultiViews
- AllowOverride None
- Order allow,deny
- Allow from all
-</Directory>
-
-#
-# ScriptAlias: This controls which directories contain server scripts.
-# ScriptAliases are essentially the same as Aliases, except that
-# documents in the realname directory are treated as applications and
-# run by the server when requested rather than as documents sent to the client.
-# The same rules about trailing "/" apply to ScriptAlias directives as to
-# Alias.
-#
-ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
-
-#
-# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
-# CGI directory exists, if you have that configured.
-#
-<Directory "/var/www/cgi-bin">
- AllowOverride None
- Options ExecCGI
- Order allow,deny
- Allow from all
-</Directory>
-
-#
-# Redirect allows you to tell clients about documents which used to exist in
-# your server's namespace, but do not anymore. This allows you to tell the
-# clients where to look for the relocated document.
-# Format: Redirect old-URI new-URL
-#
-
-#
-# Directives controlling the display of server-generated directory listings.
-#
-
-#
-# FancyIndexing: whether you want fancy directory indexing or standard
-#
-IndexOptions FancyIndexing NameWidth=*
-
-#
-# AddIcon* directives tell the server which icon to show for different
-# files or filename extensions. These are only displayed for
-# FancyIndexed directories.
-#
-AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
-
-AddIconByType (TXT,/icons/text.gif) text/*
-AddIconByType (IMG,/icons/image2.gif) image/*
-AddIconByType (SND,/icons/sound2.gif) audio/*
-AddIconByType (VID,/icons/movie.gif) video/*
-
-AddIcon /icons/binary.gif .bin .exe
-AddIcon /icons/binhex.gif .hqx
-AddIcon /icons/tar.gif .tar
-AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
-AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
-AddIcon /icons/a.gif .ps .ai .eps
-AddIcon /icons/layout.gif .html .shtml .htm .pdf
-AddIcon /icons/text.gif .txt
-AddIcon /icons/c.gif .c
-AddIcon /icons/p.gif .pl .py
-AddIcon /icons/f.gif .for
-AddIcon /icons/dvi.gif .dvi
-AddIcon /icons/uuencoded.gif .uu
-AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
-AddIcon /icons/tex.gif .tex
-AddIcon /icons/bomb.gif core
-
-AddIcon /icons/back.gif ..
-AddIcon /icons/hand.right.gif README
-AddIcon /icons/folder.gif ^^DIRECTORY^^
-AddIcon /icons/blank.gif ^^BLANKICON^^
-
-#
-# DefaultIcon: which icon to show for files which do not have an icon
-# explicitly set.
-#
-DefaultIcon /icons/unknown.gif
-
-#
-# AddDescription: allows you to place a short description after a file in
-# server-generated indexes. These are only displayed for FancyIndexed
-# directories.
-# Format: AddDescription "description" filename
-#
-#AddDescription "GZIP compressed document" .gz
-#AddDescription "tar archive" .tar
-#AddDescription "GZIP compressed tar archive" .tgz
-
-#
-# ReadmeName: the name of the README file the server will look for by
-# default, and append to directory listings.
-#
-# HeaderName: the name of a file which should be prepended to
-# directory indexes.
-#
-# The server will first look for name.html and include it if found.
-# If name.html doesn't exist, the server will then look for name.txt
-# and include it as plaintext if found.
-#
-ReadmeName README.html
-HeaderName HEADER.html
-
-#
-# IndexIgnore: a set of filenames which directory indexing should ignore
-# and not include in the listing. Shell-style wildcarding is permitted.
-#
-IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
-
-#
-# AddEncoding: allows you to have certain browsers (Mosaic/X 2.1+) uncompress
-# information on the fly. Note: Not all browsers support this.
-# Despite the name similarity, the following Add* directives have nothing
-# to do with the FancyIndexing customization directives above.
-#
-AddEncoding x-compress Z
-AddEncoding x-gzip gz tgz
-
-#
-# AddLanguage: allows you to specify the language of a document. You can
-# then use content negotiation to give a browser a file in a language
-# it can understand. Note that the suffix does not have to be the same
-# as the language keyword --- those with documents in Polish (whose
-# net-standard language code is pl) may wish to use "AddLanguage pl .po"
-# to avoid the ambiguity with the common suffix for perl scripts.
-#
-AddLanguage en .en
-AddLanguage fr .fr
-AddLanguage de .de
-AddLanguage da .da
-AddLanguage el .el
-AddLanguage it .it
-
-#
-# LanguagePriority: allows you to give precedence to some languages
-# in case of a tie during content negotiation.
-# Just list the languages in decreasing order of preference.
-#
-LanguagePriority en fr de
-
-#
-# AddType: allows you to tweak mime.types without actually editing it, or to
-# make certain files to be certain types.
-#
-# The following is for PHP4 (conficts with PHP/FI, below):
-<IfModule mod_php4.c>
- AddType application/x-httpd-php .php4 .php3 .phtml .php
- AddType application/x-httpd-php-source .phps
-</IfModule>
-
-# The following is for PHP3:
-<IfModule mod_php3.c>
- AddType application/x-httpd-php3 .php3
- AddType application/x-httpd-php3-source .phps
-</IfModule>
-
-# The following is for PHP/FI (PHP2):
-<IfModule mod_php.c>
- AddType application/x-httpd-php .phtml
-</IfModule>
-
-AddType application/x-tar .tgz
-
-#
-# AddHandler: allows you to map certain file extensions to "handlers",
-# actions unrelated to filetype. These can be either built into the server
-# or added with the Action command (see below)
-#
-# If you want to use server side includes, or CGI outside
-# ScriptAliased directories, uncomment the following lines.
-#
-# To use CGI scripts:
-#
-#AddHandler cgi-script .cgi
-
-#
-# To use server-parsed HTML files
-#
-AddType text/html .shtml
-AddHandler server-parsed .shtml
-
-#
-# Uncomment the following line to enable Apache's send-asis HTTP file
-# feature
-#
-#AddHandler send-as-is asis
-
-#
-# If you wish to use server-parsed imagemap files, use
-#
-AddHandler imap-file map
-
-#
-# To enable type maps, you might want to use
-#
-#AddHandler type-map var
-
-#
-# Action: lets you define media types that will execute a script whenever
-# a matching file is called. This eliminates the need for repeated URL
-# pathnames for oft-used CGI file processors.
-# Format: Action media/type /cgi-script/location
-# Format: Action handler-name /cgi-script/location
-#
-
-#
-# MetaDir: specifies the name of the directory in which Apache can find
-# meta information files. These files contain additional HTTP headers
-# to include when sending the document
-#
-#MetaDir .web
-
-#
-# MetaSuffix: specifies the file name suffix for the file containing the
-# meta information.
-#
-#MetaSuffix .meta
-
-#
-# Customizable error response (Apache style)
-# these come in three flavors
-#
-# 1) plain text
-#ErrorDocument 500 "The server made a boo boo.
-# n.b. the (") marks it as text, it does not get output
-#
-# 2) local redirects
-#ErrorDocument 404 /missing.html
-# to redirect to local URL /missing.html
-#ErrorDocument 404 /cgi-bin/missing_handler.pl
-# N.B.: You can redirect to a script or a document using server-side-includes.
-#
-# 3) external redirects
-#ErrorDocument 402
http://some.other_server.com/subscription_info.html
-# N.B.: Many of the environment variables associated with the original
-# request will *not* be available to such a script.
-
-#
-# The following directives modify normal HTTP response behavior.
-# The first directive disables keepalive for Netscape 2.x and browsers that
-# spoof it. There are known problems with these browser implementations.
-# The second directive is for Microsoft Internet Explorer 4.0b2
-# which has a broken HTTP/1.1 implementation and does not properly
-# support keepalive when it is used on 301 or 302 (redirect) responses.
-#
-BrowserMatch "Mozilla/2" nokeepalive
-BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
-
-#
-# The following directive disables HTTP/1.1 responses to browsers which
-# are in violation of the HTTP/1.0 spec by not being able to grok a
-# basic 1.1 response.
-#
-BrowserMatch "RealPlayer 4\.0" force-response-1.0
-BrowserMatch "Java/1\.0" force-response-1.0
-BrowserMatch "JDK/1\.0" force-response-1.0
-
-
-# If the perl module is installed, this will be enabled.
-<IfModule mod_perl.c>
- Alias /perl/ /var/www/perl/
- <Location /perl>
- SetHandler perl-script
- PerlHandler Apache::Registry
- Options +ExecCGI
- </Location>
-</IfModule>
-
-#
-# Allow http put (such as Netscape Gold's publish feature)
-# Use htpasswd to generate /etc/httpd/conf/passwd.
-# You must unremark these two lines at the top of this file as well:
-#LoadModule put_module modules/mod_put.so
-#AddModule mod_put.c
-#
-#Alias /upload /tmp
-#<Location /upload>
-# EnablePut On
-# AuthType Basic
-# AuthName Temporary
-# AuthUserFile /etc/httpd/conf/passwd
-# EnableDelete Off
-# umask 007
-# <Limit PUT>
-# require valid-user
-# </Limit>
-#</Location>
-
-#
-# Allow server status reports, with the URL of
http://servername/server-status
-# Change the ".your_domain.com" to match your domain to enable.
-#
-#<Location /server-status>
-# SetHandler server-status
-# Order deny,allow
-# Deny from all
-# Allow from .your_domain.com
-#</Location>
-
-#
-# Allow remote server configuration reports, with the URL of
-#
http://servername/server-info (requires that mod_info.c be loaded).
-# Change the ".your_domain.com" to match your domain to enable.
-#
-#<Location /server-info>
-# SetHandler server-info
-# Order deny,allow
-# Deny from all
-# Allow from .your_domain.com
-#</Location>
-
-# Allow access to local system documentation from localhost
-Alias /doc/ /usr/share/doc/
-<Location /doc>
- order deny,allow
- deny from all
- allow from localhost .localdomain
- Options Indexes FollowSymLinks
-</Location>
-
-#
-# There have been reports of people trying to abuse an old bug from pre-1.1
-# days. This bug involved a CGI script distributed as a part of Apache.
-# By uncommenting these lines you can redirect these attacks to a logging
-# script on
phf.apache.org. Or, you can record them yourself, using the script
-# support/phf_abuse_log.cgi.
-#
-#<Location /cgi-bin/phf*>
-# Deny from all
-# ErrorDocument 403
http://phf.apache.org/phf_abuse_log.cgi
-#</Location>
-
-#
-# Proxy Server directives. Uncomment the following lines to
-# enable the proxy server:
-#
-#<IfModule mod_proxy.c>
-#ProxyRequests On
-#
-#<Directory proxy:*>
-# Order deny,allow
-# Deny from all
-# Allow from .your_domain.com
-#</Directory>
-
-#
-# Enable/disable the handling of HTTP/1.1 "Via:" headers.
-# ("Full" adds the server version; "Block" removes all outgoing Via:
headers)
-# Set to one of: Off | On | Full | Block
-#
-#ProxyVia On
-
-#
-# To enable the cache as well, edit and uncomment the following lines:
-# (no cacheing without CacheRoot)
-#
-#CacheRoot "/var/cache/httpd"
-#CacheSize 5
-#CacheGcInterval 4
-#CacheMaxExpire 24
-#CacheLastModifiedFactor 0.1
-#CacheDefaultExpire 1
-#NoCache
a_domain.com another_domain.edu joes.garage_sale.com
-
-#</IfModule>
-# End of proxy directives.
-
-### Section 3: Virtual Hosts
-#
-# VirtualHost: If you want to maintain multiple domains/hostnames on your
-# machine you can setup VirtualHost containers for them.
-# Please see the documentation at <
URL:http://www.apache.org/docs/vhosts/>
-# for further details before you try to setup virtual hosts.
-# You may use the command line option '-S' to verify your virtual host
-# configuration.
-
-#
-# If you want to use name-based virtual hosts you need to define at
-# least one IP address (and port number) for them.
-#
-#NameVirtualHost 12.34.56.78:80
-#NameVirtualHost 12.34.56.78
-
-#
-# VirtualHost example:
-# Almost any Apache directive may go into a VirtualHost container.
-#
-#<VirtualHost ip.address.of.host.some_domain.com>
-# ServerAdmin webmaster(a)host.some_domain.com
-# DocumentRoot /www/docs/host.some_domain.com
-# ServerName
host.some_domain.com
-# ErrorLog logs/host.some_domain.com-error_log
-# CustomLog logs/host.some_domain.com-access_log common
-#</VirtualHost>
-
-#<VirtualHost _default_:*>
-#</VirtualHost>
-
-<IfDefine HAVE_SSL>
-##
-## SSL Virtual Host Context
-##
-
-# Apache will only listen on port 80 by default. Defining the virtual server
-# (below) won't make it automatically listen on the virtual server's port.
-Listen 443
-
-# SSL Session Cache:
-# The cache speeds up processing of multiple parallel requests from
-# the same client.
-SSLSessionCache shm:/var/cache/ssl_gcache_data(524288)
-
-<VirtualHost _default_:443>
-
-# General setup for the virtual host
-DocumentRoot "/var/www/html"
-
-# SSL Engine Switch:
-# Enable/Disable SSL for this virtual host.
-SSLEngine on
-
-# SSL Cipher Suite:
-# List the ciphers that the client is permitted to negotiate.
-# See the mod_ssl documentation for a complete list.
-#SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
-
-# Server Certificate:
-# Point SSLCertificateFile at a PEM encoded certificate. If
-# the certificate is encrypted, then you will be prompted for a
-# pass phrase. Note that a kill -HUP will prompt again. A test
-# certificate can be generated with `make certificate' under
-# built time. Keep in mind that if you've both a RSA and a DSA
-# certificate you can configure both in parallel (to also allow
-# the use of DSA ciphers, etc.)
-SSLCertificateFile /etc/httpd/conf/cert-beta.rhns
-#SSLCertificateFile /etc/httpd/conf/ssl.crt/server-dsa.crt
-
-# Server Private Key:
-# If the key is not combined with the certificate, use this
-# directive to point at the key file. Keep in mind that if
-# you've both a RSA and a DSA private key you can configure
-# both in parallel (to also allow the use of DSA ciphers, etc.)
-SSLCertificateKeyFile /etc/httpd/conf/cert-beta.rhns
-#SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server-dsa.key
-
-# Server Certificate Chain:
-# Point SSLCertificateChainFile at a file containing the
-# concatenation of PEM encoded CA certificates which form the
-# certificate chain for the server certificate. Alternatively
-# the referenced file can be the same as SSLCertificateFile
-# when the CA certificates are directly appended to the server
-# certificate for convinience.
-#SSLCertificateChainFile /etc/httpd/conf/ssl.crt/ca.crt
-
-# Certificate Authority (CA):
-# Set the CA certificate verification path where to find CA
-# certificates for client authentication or alternatively one
-# huge file containing all of them (file must be PEM encoded)
-# Note: Inside SSLCACertificatePath you need hash symlinks
-# to point to the certificate files. Use the provided
-# Makefile to update the hash symlinks after changes.
-#SSLCACertificatePath /etc/httpd/conf/ssl.crt
-#SSLCACertificateFile /etc/httpd/conf/ssl.crt/ca-bundle.crt
-
-# Certificate Revocation Lists (CRL):
-# Set the CA revocation path where to find CA CRLs for client
-# authentication or alternatively one huge file containing all
-# of them (file must be PEM encoded)
-# Note: Inside SSLCARevocationPath you need hash symlinks
-# to point to the certificate files. Use the provided
-# Makefile to update the hash symlinks after changes.
-#SSLCARevocationPath /etc/httpd/conf/ssl.crl
-#SSLCARevocationFile /etc/httpd/conf/ssl.crl/ca-bundle.crl
-# Client Authentication (Type):
-# Client certificate verification type and depth. Types are
-# none, optional, require and optional_no_ca. Depth is a
-# number which specifies how deeply to verify the certificate
-# issuer chain before deciding the certificate is not valid.
-#SSLVerifyClient require
-#SSLVerifyDepth 10
-
-# Access Control:
-# With SSLRequire you can do per-directory access control based
-# on arbitrary complex boolean expressions containing server
-# variable checks and other lookup directives. The syntax is a
-# mixture between C and Perl. See the mod_ssl documentation
-# for more details.
-#<Location />
-#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
-# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
-# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA",
"Dev"} \
-# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
-# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
-# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
-#</Location>
-# SSL Engine Options:
-# Set various options for the SSL engine.
-# o FakeBasicAuth:
-# Translate the client X.509 into a Basic Authorisation. This means that
-# the standard Auth/DBMAuth methods can be used for access control. The
-# user name is the `one line' version of the client's X.509 certificate.
-# Note that no password is obtained from the user. Every entry in the user
-# file needs this password: `xxj31ZMTZzkVA'.
-# o ExportCertData:
-# This exports two additional environment variables: SSL_CLIENT_CERT and
-# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
-# server (always existing) and the client (only existing when client
-# authentication is used). This can be used to import the certificates
-# into CGI scripts.
-# o StdEnvVars:
-# This exports the standard SSL/TLS related `SSL_*' environment variables.
-# Per default this exportation is switched off for performance reasons,
-# because the extraction step is an expensive operation and is usually
-# useless for serving static content. So one usually enables the
-# exportation for CGI and SSI requests only.
-# o CompatEnvVars:
-# This exports obsolete environment variables for backward compatibility
-# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
-# to provide compatibility to existing CGI scripts.
-# o StrictRequire:
-# This denies access when "SSLRequireSSL" or "SSLRequire" applied
even
-# under a "Satisfy any" situation, i.e. when it applies access is denied
-# and no other module can change it.
-# o OptRenegotiate:
-# This enables optimized SSL connection renegotiation handling when SSL
-# directives are used in per-directory context.
-#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
-<Files ~ "\.(cgi|shtml)$">
- SSLOptions +StdEnvVars
-</Files>
-<Directory "/var/www/cgi-bin">
- SSLOptions +StdEnvVars
-</Directory>
-
-# Notice: Most problems of broken clients are also related to the HTTP
-# keep-alive facility, so you usually additionally want to disable
-# keep-alive for those clients, too. Use variable "nokeepalive" for this.
-SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
-
-# Per-Server Logging:
-# The home of a custom SSL log file. Use this when you want a
-# compact non-error SSL logfile on a virtual host basis.
-CustomLog /var/log/httpd/ssl_request_log \
- "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
-
-</VirtualHost>
-
-</IfDefine>
-
-
-Include conf/local.conf
-Include conf/proxy.conf
diff --git a/web/conf/proxy/local.conf b/web/conf/proxy/local.conf
deleted file mode 100644
index 085b6da..0000000
--- a/web/conf/proxy/local.conf
+++ /dev/null
@@ -1,6 +0,0 @@
-
-##
-## RHN STUFF
-##
-
-
diff --git a/web/conf/proxy/proxy.conf b/web/conf/proxy/proxy.conf
deleted file mode 100644
index f2bff1f..0000000
--- a/web/conf/proxy/proxy.conf
+++ /dev/null
@@ -1,8 +0,0 @@
-LoadModule proxy_module modules/libproxy.so
-AddModule mod_proxy.c
-
-# so the backend can know what the request host was
-ProxyVia full
-
-ProxyPass /network/
http://webapp.devel.rhns.redhat.com/network/
-ProxyPassReverse /network/
http://webapp.devel.rhns.redhat.com/network/