Hi, Im trying to install Fedora 27 in my PowerPc but I can not boot it, I tested ubuntu and booted ok with yaboot, also tested openbsd and freebsd with openfirwmare boot. I saw this link https://github.com/masterzorag/G5_ppc64-linux but I can not replicate it or I did not understand why so many steps and why iso will not work for him. I have problem with Nvidia driver in all tested distros... Any experience or recomendation ? Im user of Fedora about more than 8 years but I see for ppc64 some distros have less packages than others...
Regards
--- Rondan Rino [Certificado en LPIC-3 ](https://cs.lpi.org/caf/Xamman/certification) LPI ID:LPI000209832 Verification Code:gbblvwyfxu [Red Hat Certified Engineer -- RHCE -- RHCVA](https://www.redhat.com/rhtapps/certification/verify/?certId=120-175-658)
Phone:+1210 888 0738
Blog:[http://www.itrestauracion.com.ar%5D(http://www.itrestauracion.com.ar/) Cv:[ http://cv.rinorondan.com.ar%5D(http://www.rinorondan.com.ar/) [http://counter.li.org%5D(http://counter.li.org/) Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
Sent from [ProtonMail](https://protonmail.ch), encrypted email based in Switzerland.
Le 04/03/2018 à 03:00, Rino Rondan a écrit :
Hi, Im trying to install Fedora 27 in my PowerPc but I can not boot it, I tested ubuntu and booted ok with yaboot, also tested openbsd and freebsd with openfirwmare boot. I saw this link https://github.com/masterzorag/G5_ppc64-linux but I can not replicate it or I did not understand why so many steps and why iso will not work for him. I have problem with Nvidia driver in all tested distros... Any experience or recomendation ? Im user of Fedora about more than 8 years but I see for ppc64 some distros have less packages than others...
I have two PowerMac G5 running Fedora 27, but the only way to install it is to install Fedora 18 and upgrade until Fedora 27. If I remember correctly installer after F18 are broken. The problem with "nouveau" driver should be fixed since kernel 4.3 with:
25d295882a1a drm/nouveau/bios: fix OF loading
I have a small VGA LCD plugged on my Pmacs and I use this kernel cmdline parameter:
video=DVI-I-1:640x480@60
But I never starts desktop session, only a console.
Thanks, Laurent
Hi, Thanks for the info!! Can I update from fedora18 to fedora 27¿? I did only one upgrade from one distro release to another, no jumping 18 to 27? How did you do it ? And what kind of boot loader uses , because im doing dd of iso image in a pen drive, but I do not know how to boot in OpenFirmware, It worked me in other distros with yaboot and ofwboot or other binaries, but not with Fedora.
Also, I want Xorg running to use as desktop to replace my old intel arch. I will test your recommendation!!
Regards ---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA
Phone: +1210 888 0738
Blog:http://www.itrestauracion.com.ar
Cv: http://cv.rinorondan.com.ar
http://counter.li.org%C2%A0 Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
Sent from ProtonMail, encrypted email based in Switzerland.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On March 4, 2018 7:43 AM, Laurent Vivier laurent@vivier.eu wrote:
Le 04/03/2018 à 03:00, Rino Rondan a écrit :
Hi,
Im trying to install Fedora 27 in my PowerPc but I can not boot it, I tested ubuntu and booted ok with yaboot, also tested openbsd and freebsd with openfirwmare boot. I saw this link https://github.com/masterzorag/G5_ppc64-linux but I can not replicate it or I did not understand why so many steps and why iso will not work for him.
I have problem with Nvidia driver in all tested distros... Any experience or recomendation ? Im user of Fedora about more than 8 years but I see for ppc64 some distros have less packages than others...
I have two PowerMac G5 running Fedora 27, but the only way to install it
is to install Fedora 18 and upgrade until Fedora 27. If I remember
correctly installer after F18 are broken. The problem with "nouveau"
driver should be fixed since kernel 4.3 with:
25d295882a1a drm/nouveau/bios: fix OF loading
I have a small VGA LCD plugged on my Pmacs and I use this kernel cmdline
parameter:
video=DVI-I-1:640x480@60
But I never starts desktop session, only a console.
Thanks,
Laurent
Hi,
Where I can download the ppc64 f18, I can not find in http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/
Regards
---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA
Phone: +1210 888 0738
Blog:http://www.itrestauracion.com.ar
Cv: http://cv.rinorondan.com.ar
http://counter.li.org%C2%A0 Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
Sent from ProtonMail, encrypted email based in Switzerland.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On March 4, 2018 9:39 AM, Rino Rondan rrondan@itrestauracion.com.ar wrote:
Hi, Thanks for the info!!
Can I update from fedora18 to fedora 27¿? I did only one upgrade from one distro release to another, no jumping 18 to 27? How did you do it ? And what kind of boot loader uses , because im doing dd of iso image in a pen drive, but I do not know how to boot in OpenFirmware, It worked me in other distros with yaboot and ofwboot or other binaries, but not with Fedora.
Also, I want Xorg running to use as desktop to replace my old intel arch.
I will test your recommendation!!
Regards
---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA
Phone: +1210 888 0738
Blog:http://www.itrestauracion.com.ar
Cv: http://cv.rinorondan.com.ar
http://counter.li.org%C2%A0 Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
Sent from ProtonMail, encrypted email based in Switzerland.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On March 4, 2018 7:43 AM, Laurent Vivier laurent@vivier.eu wrote:
Le 04/03/2018 à 03:00, Rino Rondan a écrit :
Hi,
Im trying to install Fedora 27 in my PowerPc but I can not boot it, I tested ubuntu and booted ok with yaboot, also tested openbsd and freebsd with openfirwmare boot. I saw this link https://github.com/masterzorag/G5_ppc64-linux but I can not replicate it or I did not understand why so many steps and why iso will not work for him.
I have problem with Nvidia driver in all tested distros... Any experience or recomendation ? Im user of Fedora about more than 8 years but I see for ppc64 some distros have less packages than others...
I have two PowerMac G5 running Fedora 27, but the only way to install it
is to install Fedora 18 and upgrade until Fedora 27. If I remember
correctly installer after F18 are broken. The problem with "nouveau"
driver should be fixed since kernel 4.3 with:
25d295882a1a drm/nouveau/bios: fix OF loading
I have a small VGA LCD plugged on my Pmacs and I use this kernel cmdline
parameter:
video=DVI-I-1:640x480@60
But I never starts desktop session, only a console.
Thanks,
Laurent
I found !! sorry
---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA
Phone: +1210 888 0738
Blog:http://www.itrestauracion.com.ar
Cv: http://cv.rinorondan.com.ar
http://counter.li.org%C2%A0 Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
Sent from ProtonMail, encrypted email based in Switzerland.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On March 4, 2018 9:51 AM, Rino Rondan rrondan@itrestauracion.com.ar wrote:
Hi,
Where I can download the ppc64 f18, I can not find in http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/
Regards
---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA
Phone: +1210 888 0738
Blog:http://www.itrestauracion.com.ar
Cv: http://cv.rinorondan.com.ar
http://counter.li.org%C2%A0 Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
Sent from ProtonMail, encrypted email based in Switzerland.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On March 4, 2018 9:39 AM, Rino Rondan rrondan@itrestauracion.com.ar wrote:
Hi, Thanks for the info!!
Can I update from fedora18 to fedora 27¿? I did only one upgrade from one distro release to another, no jumping 18 to 27? How did you do it ? And what kind of boot loader uses , because im doing dd of iso image in a pen drive, but I do not know how to boot in OpenFirmware, It worked me in other distros with yaboot and ofwboot or other binaries, but not with Fedora.
Also, I want Xorg running to use as desktop to replace my old intel arch.
I will test your recommendation!!
Regards
---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA
Phone: +1210 888 0738
Blog:http://www.itrestauracion.com.ar
Cv: http://cv.rinorondan.com.ar
http://counter.li.org%C2%A0 Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
Sent from ProtonMail, encrypted email based in Switzerland.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On March 4, 2018 7:43 AM, Laurent Vivier laurent@vivier.eu wrote:
Le 04/03/2018 à 03:00, Rino Rondan a écrit :
Hi,
Im trying to install Fedora 27 in my PowerPc but I can not boot it, I tested ubuntu and booted ok with yaboot, also tested openbsd and freebsd with openfirwmare boot. I saw this link https://github.com/masterzorag/G5_ppc64-linux but I can not replicate it or I did not understand why so many steps and why iso will not work for him.
I have problem with Nvidia driver in all tested distros... Any experience or recomendation ? Im user of Fedora about more than 8 years but I see for ppc64 some distros have less packages than others...
I have two PowerMac G5 running Fedora 27, but the only way to install it
is to install Fedora 18 and upgrade until Fedora 27. If I remember
correctly installer after F18 are broken. The problem with "nouveau"
driver should be fixed since kernel 4.3 with:
25d295882a1a drm/nouveau/bios: fix OF loading
I have a small VGA LCD plugged on my Pmacs and I use this kernel cmdline
parameter:
video=DVI-I-1:640x480@60
But I never starts desktop session, only a console.
Thanks,
Laurent
ppc mailing list -- ppc@lists.fedoraproject.org
To unsubscribe send an email to ppc-leave@lists.fedoraproject.org
I tried booting from here in fedora27 net install ppc64 boot ud:,\boot\grub\powerpc-ieee1275\core.elf
Load everything, but hang after detect disk in random: crng init done Do I need to add some parameter in grub.cfg to avoid that ?
--- Rondan Rino Certificado en LPIC-3 LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA
Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
On Mar 4, 2018, at 09:54, Rino Rondan rrondan@itrestauracion.com.ar wrote:
I found !! sorry
---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA
Phone: +1210 888 0738
Blog:http://www.itrestauracion.com.ar
Cv: http://cv.rinorondan.com.ar
http://counter.li.org Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
Sent from ProtonMail, encrypted email based in Switzerland.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On March 4, 2018 9:51 AM, Rino Rondan rrondan@itrestauracion.com.ar wrote:
Hi,
Where I can download the ppc64 f18, I can not find in http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/
Regards
---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA
Phone: +1210 888 0738
Blog:http://www.itrestauracion.com.ar
Cv: http://cv.rinorondan.com.ar
http://counter.li.org Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
Sent from ProtonMail, encrypted email based in Switzerland.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On March 4, 2018 9:39 AM, Rino Rondan rrondan@itrestauracion.com.ar wrote:
Hi, Thanks for the info!!
Can I update from fedora18 to fedora 27¿? I did only one upgrade from one distro release to another, no jumping 18 to 27? How did you do it ? And what kind of boot loader uses , because im doing dd of iso image in a pen drive, but I do not know how to boot in OpenFirmware, It worked me in other distros with yaboot and ofwboot or other binaries, but not with Fedora.
Also, I want Xorg running to use as desktop to replace my old intel arch.
I will test your recommendation!!
Regards
---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA
Phone: +1210 888 0738
Blog:http://www.itrestauracion.com.ar
Cv: http://cv.rinorondan.com.ar
http://counter.li.org Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
Sent from ProtonMail, encrypted email based in Switzerland.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On March 4, 2018 7:43 AM, Laurent Vivier laurent@vivier.eu wrote:
Le 04/03/2018 à 03:00, Rino Rondan a écrit :
Hi,
Im trying to install Fedora 27 in my PowerPc but I can not boot it, I tested ubuntu and booted ok with yaboot, also tested openbsd and freebsd with openfirwmare boot. I saw this link https://github.com/masterzorag/G5_ppc64-linux but I can not replicate it or I did not understand why so many steps and why iso will not work for him.
I have problem with Nvidia driver in all tested distros... Any experience or recomendation ? Im user of Fedora about more than 8 years but I see for ppc64 some distros have less packages than others...
I have two PowerMac G5 running Fedora 27, but the only way to install it
is to install Fedora 18 and upgrade until Fedora 27. If I remember
correctly installer after F18 are broken. The problem with "nouveau"
driver should be fixed since kernel 4.3 with:
25d295882a1a drm/nouveau/bios: fix OF loading
I have a small VGA LCD plugged on my Pmacs and I use this kernel cmdline
parameter:
video=DVI-I-1:640x480@60
But I never starts desktop session, only a console.
Thanks,
Laurent
ppc mailing list -- ppc@lists.fedoraproject.org
To unsubscribe send an email to ppc-leave@lists.fedoraproject.org
ppc mailing list -- ppc@lists.fedoraproject.org To unsubscribe send an email to ppc-leave@lists.fedoraproject.org
I have this error after dracut crash.. Do I need to edit grub.cfg in netboot image and add some extra parameter for video or other stuff ?
cat rdsosreport.txt + cat /lib/dracut/dracut-046-5.fc27 dracut-046-5.fc27 + cat /proc/cmdline BOOT_IMAGE=/ppc/ppc64/vmlinuz ro + '[' -f /etc/cmdline ']' + for _i in /etc/cmdline.d/*.conf + '[' -f /etc/cmdline.d/99-anaconda-disable-disk-activation.conf ']' + echo /etc/cmdline.d/99-anaconda-disable-disk-activation.conf /etc/cmdline.d/99-anaconda-disable-disk-activation.conf + cat /etc/cmdline.d/99-anaconda-disable-disk-activation.conf rd.dm=0 rd.md=0 rd.lvm=0 rd.luks=0 + cat /proc/self/mountinfo 1 1 0:2 / / rw shared:1 - rootfs rootfs rw,size=1156480k,nr_inodes=18070 19 1 0:19 / /sys rw,nosuid,nodev,noexec,relatime shared:2 - sysfs sysfs rw 20 1 0:5 / /proc rw,nosuid,nodev,noexec,relatime shared:8 - proc proc rw 21 1 0:6 / /dev rw,nosuid shared:9 - devtmpfs devtmpfs rw,size=1156480k,nr_inodes=18070,mode=755 22 19 0:7 / /sys/kernel/security rw,nosuid,nodev,noexec,relatime shared:3 - securityfs securityfs rw 23 21 0:20 / /dev/shm rw,nosuid,nodev shared:10 - tmpfs tmpfs rw 24 21 0:21 / /dev/pts rw,nosuid,noexec,relatime shared:11 - devpts devpts rw,gid=5,mode=620,ptmxmode=000 25 1 0:22 / /run rw,nosuid,nodev shared:12 - tmpfs tmpfs rw,mode=755 26 19 0:23 / /sys/fs/cgroup ro,nosuid,nodev,noexec shared:4 - tmpfs tmpfs ro,mode=755 27 26 0:24 / /sys/fs/cgroup/unified rw,nosuid,nodev,noexec,relatime shared:5 - cgroup2 cgroup rw 28 26 0:25 / /sys/fs/cgroup/systemd rw,nosuid,nodev,noexec,relatime shared:6 - cgroup cgroup rw,xattr,name=systemd 29 19 0:26 / /sys/fs/pstore rw,nosuid,nodev,noexec,relatime shared:7 - pstore pstore rw 30 26 0:27 / /sys/fs/cgroup/net_cls,net_prio rw,nosuid,nodev,noexec,relatime shared:13 - cgroup cgroup rw,net_cls,net_prio 31 26 0:28 / /sys/fs/cgroup/pids rw,nosuid,nodev,noexec,relatime shared:14 - cgroup cgroup rw,pids 32 26 0:29 / /sys/fs/cgroup/perf_event rw,nosuid,nodev,noexec,relatime shared:15 - cgroup cgroup rw,perf_event 33 26 0:30 / /sys/fs/cgroup/cpu,cpuacct rw,nosuid,nodev,noexec,relatime shared:16 - cgroup cgroup rw,cpu,cpuacct 34 26 0:31 / /sys/fs/cgroup/memory rw,nosuid,nodev,noexec,relatime shared:17 - cgroup cgroup rw,memory 35 26 0:32 / /sys/fs/cgroup/devices rw,nosuid,nodev,noexec,relatime shared:18 - cgroup cgroup rw,devices 36 26 0:33 / /sys/fs/cgroup/freezer rw,nosuid,nodev,noexec,relatime shared:19 - cgroup cgroup rw,freezer 37 26 0:34 / /sys/fs/cgroup/hugetlb rw,nosuid,nodev,noexec,relatime shared:20 - cgroup cgroup rw,hugetlb 38 26 0:35 / /sys/fs/cgroup/blkio rw,nosuid,nodev,noexec,relatime shared:21 - cgroup cgroup rw,blkio 39 26 0:36 / /sys/fs/cgroup/cpuset rw,nosuid,nodev,noexec,relatime shared:22 - cgroup cgroup rw,cpuset 40 1 0:37 / /var/lib/nfs/rpc_pipefs rw,relatime shared:23 - rpc_pipefs rpc_pipefs rw 64 19 0:38 / /sys/kernel/config rw,relatime shared:24 - configfs configfs rw + cat /proc/mounts rootfs / rootfs rw,size=1156480k,nr_inodes=18070 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 devtmpfs /dev devtmpfs rw,nosuid,size=1156480k,nr_inodes=18070,mode=755 0 0 securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,nodev,mode=755 0 0 tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0 cgroup /sys/fs/cgroup/unified cgroup2 rw,nosuid,nodev,noexec,relatime 0 0 cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,name=systemd 0 0 pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0 cgroup /sys/fs/cgroup/net_cls,net_prio cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio 0 0 cgroup /sys/fs/cgroup/pids cgroup rw,nosuid,nodev,noexec,relatime,pids 0 0 cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0 cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0 cgroup /sys/fs/cgroup/memory cgroup rw,nosuid,nodev,noexec,relatime,memory 0 0 cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0 cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0 cgroup /sys/fs/cgroup/hugetlb cgroup rw,nosuid,nodev,noexec,relatime,hugetlb 0 0 cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0 cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0 rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs rw,relatime 0 0 configfs /sys/kernel/config configfs rw,relatime 0 0 + blkid /dev/sda1: PARTLABEL="Apple" /dev/sda2: LABEL="FreeBSD Bootstrap" TYPE="hfs" /dev/sda3: UUID="5a9b44cdb1c0cae3" TYPE="ufs" /dev/sdc1: SEC_TYPE="msdos" UUID="2D28-0C14" TYPE="vfat" /dev/sdc4: UUID="5a94e3a1c2d9fa2c" TYPE="ufs" PTTYPE="dos" /dev/sdb1: UUID="2017-11-05-05-03-54-00" LABEL="Fedora_S_dvd_ppc64_27" TYPE="iso9660" PTTYPE="dos" + blkid -o udev ID_FS_LABEL=FreeBSD_Bootstrap ID_FS_LABEL_ENC=FreeBSD\x20Bootstrap ID_FS_TYPE=hfs
ID_FS_UUID=5a9b44cdb1c0cae3 ID_FS_UUID_ENC=5a9b44cdb1c0cae3 ID_FS_TYPE=ufs
ID_FS_SEC_TYPE=msdos ID_FS_UUID=2D28-0C14 ID_FS_UUID_ENC=2D28-0C14 ID_FS_TYPE=vfat
ID_FS_UUID=5a94e3a1c2d9fa2c ID_FS_UUID_ENC=5a94e3a1c2d9fa2c ID_FS_TYPE=ufs ID_PART_TABLE_TYPE=dos
ID_FS_UUID=2017-11-05-05-03-54-00 ID_FS_UUID_ENC=2017-11-05-05-03-54-00 ID_FS_LABEL=Fedora_S_dvd_ppc64_27 ID_FS_LABEL_ENC=Fedora_S_dvd_ppc64_27 ID_FS_TYPE=iso9660 ID_PART_TABLE_TYPE=dos
ID_FS_PARTLABEL=Apple + ls -l /dev/disk/by-id /dev/disk/by-label /dev/disk/by-path /dev/disk/by-uuid /dev/disk/by-id: total 0 lrwxrwxrwx 1 root root 9 Mar 4 14:51 ata-HL-DT-ST_DVD-RW_GWA-4165B_263A7F963AFA -> ../../sr0 lrwxrwxrwx 1 root root 9 Mar 4 14:51 ata-SAMSUNG_SP2504C_S09QJ1HL952442 -> ../../sdc lrwxrwxrwx 1 root root 10 Mar 4 14:51 ata-SAMSUNG_SP2504C_S09QJ1HL952442-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 10 Mar 4 14:51 ata-SAMSUNG_SP2504C_S09QJ1HL952442-part4 -> ../../sdc4 lrwxrwxrwx 1 root root 9 Mar 4 14:51 ata-WDC_WD1600JS-41MVB1_WD-WMAP01138964 -> ../../sda lrwxrwxrwx 1 root root 10 Mar 4 14:51 ata-WDC_WD1600JS-41MVB1_WD-WMAP01138964-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Mar 4 14:51 ata-WDC_WD1600JS-41MVB1_WD-WMAP01138964-part2 -> ../../sda2 lrwxrwxrwx 1 root root 10 Mar 4 14:51 ata-WDC_WD1600JS-41MVB1_WD-WMAP01138964-part3 -> ../../sda3 lrwxrwxrwx 1 root root 10 Mar 4 14:51 ata-WDC_WD1600JS-41MVB1_WD-WMAP01138964-part4 -> ../../sda4 lrwxrwxrwx 1 root root 9 Mar 4 14:51 usb-Generic_Flash_Disk_2070E8A6-0:0 -> ../../sdb lrwxrwxrwx 1 root root 10 Mar 4 14:51 usb-Generic_Flash_Disk_2070E8A6-0:0-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 9 Mar 4 14:51 wwn-0x50000f001b952442 -> ../../sdc lrwxrwxrwx 1 root root 10 Mar 4 14:51 wwn-0x50000f001b952442-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 10 Mar 4 14:51 wwn-0x50000f001b952442-part4 -> ../../sdc4
/dev/disk/by-label: total 0 lrwxrwxrwx 1 root root 10 Mar 4 14:51 Fedora_S_dvd_ppc64_27 -> ../../sdb1 lrwxrwxrwx 1 root root 10 Mar 4 14:51 FreeBSD\x20Bootstrap -> ../../sda2
/dev/disk/by-path: total 0 lrwxrwxrwx 1 root root 9 Mar 4 14:51 pci-0001:01:0b.2-usb-0:2:1.0-scsi-0:0:0:0 -> ../../sdb lrwxrwxrwx 1 root root 10 Mar 4 14:51 pci-0001:01:0b.2-usb-0:2:1.0-scsi-0:0:0:0-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 9 Mar 4 14:51 pci-0001:03:0c.0-ata-1 -> ../../sda lrwxrwxrwx 1 root root 10 Mar 4 14:51 pci-0001:03:0c.0-ata-1-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Mar 4 14:51 pci-0001:03:0c.0-ata-1-part2 -> ../../sda2 lrwxrwxrwx 1 root root 10 Mar 4 14:51 pci-0001:03:0c.0-ata-1-part3 -> ../../sda3 lrwxrwxrwx 1 root root 10 Mar 4 14:51 pci-0001:03:0c.0-ata-1-part4 -> ../../sda4 lrwxrwxrwx 1 root root 9 Mar 4 14:51 pci-0001:03:0c.0-ata-2 -> ../../sdc lrwxrwxrwx 1 root root 10 Mar 4 14:51 pci-0001:03:0c.0-ata-2-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 10 Mar 4 14:51 pci-0001:03:0c.0-ata-2-part4 -> ../../sdc4 lrwxrwxrwx 1 root root 9 Mar 4 14:51 pci-0001:03:0d.0-ata-1 -> ../../sr0
/dev/disk/by-uuid: total 0 lrwxrwxrwx 1 root root 10 Mar 4 14:51 2017-11-05-05-03-54-00 -> ../../sdb1 lrwxrwxrwx 1 root root 10 Mar 4 14:51 2D28-0C14 -> ../../sdc1 lrwxrwxrwx 1 root root 10 Mar 4 14:51 5a94e3a1c2d9fa2c -> ../../sdc4 lrwxrwxrwx 1 root root 10 Mar 4 14:51 5a9b44cdb1c0cae3 -> ../../sda3 + for _i in /etc/conf.d/*.conf + '[' -f /etc/conf.d/systemd.conf ']' + echo /etc/conf.d/systemd.conf /etc/conf.d/systemd.conf + cat /etc/conf.d/systemd.conf systemdutildir="/usr/lib/systemd" systemdsystemunitdir="/usr/lib/systemd/system" systemdsystemconfdir="/etc/systemd/system" + command -v lvm + lvm pvdisplay + lvm vgdisplay + lvm lvdisplay + command -v dmsetup + dmsetup ls --tree No devices found + cat /proc/mdstat Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] [linear] unused devices: <none> + command -v ip + ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enP1p5s4f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:14:51:68:33:0e brd ff:ff:ff:ff:ff:ff 3: enP1p5s4f1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:14:51:68:33:0f brd ff:ff:ff:ff:ff:ff + command -v journalctl + journalctl -ab --no-pager -o short-monotonic -- Logs begin at Sun 2018-03-04 14:51:29 UTC, end at Sun 2018-03-04 14:59:27 UTC. -- [ 0.000000] localhost kernel: Allocated 2621440 bytes for 1024 pacas at c00000000fd80000 [ 0.000000] localhost kernel: Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24 [ 0.000000] localhost kernel: Initializing hash mmu with SLB [ 0.000000] localhost kernel: Linux version 4.13.9-300.fc27.ppc64 (mockbuild@buildvm-ppc64-04.ppc.fedoraproject.org) (gcc version 7.2.1 20170915 (Red Hat 7.2.1-2) (GCC)) #1 SMP Mon Oct 23 13:31:20 UTC 2017 [ 0.000000] localhost kernel: Found initrd at 0xc000000003b00000:0xc000000006cf19c4 [ 0.000000] localhost kernel: Found U4 memory controller & host bridge @ 0xf8000000 revision: 0x42 [ 0.000000] localhost kernel: Mapped at 0xd000080080000000 [ 0.000000] localhost kernel: Found a Shasta mac-io controller, rev: 0, mapped at 0xd000080080050000 [ 0.000000] localhost kernel: PowerMac motherboard: PowerMac G5 Dual Core [ 0.000000] localhost kernel: DART table allocated at: c00000007f000000 [ 0.000000] localhost kernel: DART IOMMU initialized for U4 type chipset [ 0.000000] localhost kernel: Using PowerMac machine description [ 0.000000] localhost kernel: bootconsole [udbg0] enabled [ 0.000000] localhost kernel: CPU maps initialized for 1 thread per core [ 0.000000] localhost kernel: (thread shift is 0) [ 0.000000] localhost kernel: Freed 2555904 bytes for unused pacas [ 0.000000] localhost kernel: ----------------------------------------------------- [ 0.000000] localhost kernel: ppc64_pft_size = 0x0 [ 0.000000] localhost kernel: phys_mem_size = 0xa0000000 [ 0.000000] localhost kernel: dcache_bsize = 0x80 [ 0.000000] localhost kernel: icache_bsize = 0x80 [ 0.000000] localhost kernel: cpu_features = 0x0804806318100448 [ 0.000000] localhost kernel: possible = 0x5fffffff18500649 [ 0.000000] localhost kernel: always = 0x0000000018100040 [ 0.000000] localhost kernel: cpu_user_features = 0xdc080000 0x00000000 [ 0.000000] localhost kernel: mmu_features = 0x0c008001 [ 0.000000] localhost kernel: firmware_features = 0x0000000000000000 [ 0.000000] localhost kernel: htab_address = 0xc00000011c000000 [ 0.000000] localhost kernel: htab_hash_mask = 0x7ffff [ 0.000000] localhost kernel: ----------------------------------------------------- [ 0.000000] localhost kernel: cma: Reserved 128 MiB at 0x0000000113000000 [ 0.000000] localhost kernel: Top of RAM: 0x120000000, Total RAM: 0xa0000000 [ 0.000000] localhost kernel: Memory hole size: 2048MB [ 0.000000] localhost kernel: numa: NODE_DATA [mem 0x11bfbc300-0x11bfc5fff] [ 0.000000] localhost kernel: Found U4-PCIE PCI host bridge. Firmware bus number: 0->255 [ 0.000000] localhost kernel: PCI host bridge /pci@0,f0000000 ranges: [ 0.000000] localhost kernel: MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] localhost kernel: IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] localhost kernel: MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 [ 0.000000] localhost kernel: Can't get bus-range for /ht@0,f2000000, assume bus 0 [ 0.000000] localhost kernel: Found U3-HT PCI host bridge. Firmware bus number: 0->239 [ 0.000000] localhost kernel: PCI host bridge /ht@0,f2000000 (primary) ranges: [ 0.000000] localhost kernel: SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM Corp. [ 0.000000] localhost kernel: nvram: Checking bank 0... [ 0.000000] localhost kernel: nvram: gen0=1835, gen1=1836 [ 0.000000] localhost kernel: nvram: Active bank is: 1 [ 0.000000] localhost kernel: nvram: OF partition at 0x410 [ 0.000000] localhost kernel: nvram: XP partition at 0x1020 [ 0.000000] localhost kernel: nvram: NR partition at 0x1120 [ 0.000000] localhost kernel: Top of RAM: 0x120000000, Total RAM: 0xa0000000 [ 0.000000] localhost kernel: Memory hole size: 2048MB [ 0.000000] localhost kernel: Zone ranges: [ 0.000000] localhost kernel: DMA [mem 0x0000000000000000-0x000000011fffffff] [ 0.000000] localhost kernel: DMA32 empty [ 0.000000] localhost kernel: Normal empty [ 0.000000] localhost kernel: Movable zone start for each node [ 0.000000] localhost kernel: Early memory node ranges [ 0.000000] localhost kernel: node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] localhost kernel: node 0: [mem 0x0000000100000000-0x000000011fffffff] [ 0.000000] localhost kernel: Initmem setup node 0 [mem 0x0000000000000000-0x000000011fffffff] [ 0.000000] localhost kernel: On node 0 totalpages: 40960 [ 0.000000] localhost kernel: DMA zone: 40 pages used for memmap [ 0.000000] localhost kernel: DMA zone: 0 pages reserved [ 0.000000] localhost kernel: DMA zone: 40960 pages, LIFO batch:1 [ 0.000000] localhost kernel: percpu: Embedded 3 pages/cpu @c00000011be00000 s151064 r0 d45544 u524288 [ 0.000000] localhost kernel: pcpu-alloc: s151064 r0 d45544 u524288 alloc=1*1048576 [ 0.000000] localhost kernel: pcpu-alloc: [0] 0 1 [ 0.000000] localhost kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 40920 [ 0.000000] localhost kernel: Policy zone: DMA [ 0.000000] localhost kernel: Kernel command line: BOOT_IMAGE=/ppc/ppc64/vmlinuz ro [ 0.000000] localhost kernel: PID hash table entries: 4096 (order: -1, 32768 bytes) [ 0.000000] localhost kernel: Memory: 2312960K/2621440K available (11712K kernel code, 2368K rwdata, 3776K rodata, 6016K init, 2408K bss, 177408K reserved, 131072K cma-reserved) [ 0.000000] localhost kernel: random: get_random_u64 called from .cache_random_seq_create+0x90/0x170 with crng_init=0 [ 0.000000] localhost kernel: SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] localhost kernel: ftrace: allocating 30304 entries in 12 pages [ 0.000000] localhost kernel: Hierarchical RCU implementation. [ 0.000000] localhost kernel: RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=2. [ 0.000000] localhost kernel: Tasks RCU enabled. [ 0.000000] localhost kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] localhost kernel: NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] localhost kernel: mpic: Resetting [ 0.000000] localhost kernel: mpic: Setting up MPIC " MPIC 1 " version 1.2 at f8040000, max 2 CPUs [ 0.000000] localhost kernel: mpic: ISU size: 124, shift: 7, mask: 7f [ 0.000000] localhost kernel: mpic: Initializing for 124 sources [ 0.000000] localhost kernel: mpic: Setting up HT PICs workarounds for U3/U4 [ 0.000000] localhost kernel: mpic: - HT:01.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] localhost kernel: mpic: - HT:02.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] localhost kernel: mpic: - HT:03.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] localhost kernel: mpic: - HT:04.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] localhost kernel: mpic: - HT:05.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] localhost kernel: mpic: - HT:06.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] localhost kernel: mpic: - HT:07.0 [0x90] vendor 106b device 0053 has 86 irqs [ 0.000000] localhost kernel: time_init: decrementer frequency = 33.333333 MHz [ 0.000000] localhost kernel: time_init: processor frequency = 2000.000000 MHz [ 0.000003] localhost kernel: clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x7b00c4bad, max_idle_ns: 440795202744 ns [ 0.000378] localhost kernel: clocksource: timebase mult[1e000005] shift[24] registered [ 0.000694] localhost kernel: clockevent: decrementer mult[8888887] shift[32] cpu[0] [ 0.000761] localhost kernel: Console: colour dummy device 80x25 [ 0.001046] localhost kernel: console [tty0] enabled [ 0.001316] localhost kernel: bootconsole [udbg0] disabled [ 0.001706] localhost kernel: pid_max: default: 32768 minimum: 301 [ 0.002117] localhost kernel: Security Framework initialized [ 0.002123] localhost kernel: Yama: becoming mindful. [ 0.002135] localhost kernel: SELinux: Initializing. [ 0.002269] localhost kernel: SELinux: Starting in permissive mode [ 0.003545] localhost kernel: Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes) [ 0.004264] localhost kernel: Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes) [ 0.004356] localhost kernel: Mount-cache hash table entries: 8192 (order: 0, 65536 bytes) [ 0.004385] localhost kernel: Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes) [ 0.005766] localhost kernel: PowerMac SMP probe found 2 cpus [ 0.005896] localhost kernel: KeyWest i2c @0xf8001003 irq 16 /u4@0,f8000000/i2c@f8001000 [ 0.005905] localhost kernel: channel 1 bus /u4@0,f8000000/i2c@f8001000/i2c-bus@1 [ 0.005960] localhost kernel: KeyWest i2c @0x80018000 irq 27 /ht@0,f2000000/pci@8/mac-io@7/i2c@18000 [ 0.005969] localhost kernel: channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0 [ 0.005978] localhost kernel: channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0 [ 0.006026] localhost kernel: SMU i2c /smu@0,0/smu-i2c-control@0 [ 0.006033] localhost kernel: channel b bus /smu@0,0/smu-i2c-control@0/i2c-bus@b [ 0.006040] localhost kernel: channel e bus /smu@0,0/smu-i2c-control@0/i2c-bus@e [ 0.006063] localhost kernel: Processor timebase sync using platform function [ 0.006069] localhost kernel: mpic: requesting IPIs... [ 0.006274] localhost kernel: PPC970/FX/MP performance monitor hardware support registered [ 0.006334] localhost kernel: Hierarchical SRCU implementation. [ 0.007257] localhost kernel: smp: Bringing up secondary CPUs ... [ 0.009205] localhost kernel: smp: Brought up 1 node, 2 CPUs [ 0.010589] localhost kernel: devtmpfs: initialized [ 0.016380] localhost kernel: OF: Duplicate name in i2c@18000, renamed to "i2c-bus@0#1" [ 0.018190] localhost kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.018212] localhost kernel: futex hash table entries: 512 (order: 0, 65536 bytes) [ 0.019003] localhost kernel: NET: Registered protocol family 16 [ 0.019027] localhost kernel: eeh_init: Platform EEH operation not found [ 0.019128] localhost kernel: IBM eBus Device Driver [ 0.019710] localhost kernel: cpuidle: using governor menu [ 0.021184] localhost kernel: PCI: Probing PCI hardware [ 0.021266] localhost kernel: PCI host bridge to bus 0000:00 [ 0.021277] localhost kernel: pci_bus 0000:00: root bus resource [io 0x10000-0x80ffff] (bus address [0x0000-0x7fffff]) [ 0.021287] localhost kernel: pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff] [ 0.021294] localhost kernel: pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff] [ 0.021303] localhost kernel: pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.021313] localhost kernel: pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.021349] localhost kernel: pci 0000:00:0b.0: [106b:005b] type 01 class 0x060400 [ 0.021395] localhost kernel: PCI: Fixup U4 PCIe bridge range: [mem 0x90000000-0x9fffffff] [ 0.021442] localhost kernel: pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.023514] localhost kernel: IOMMU table initialized, virtual merging enabled [ 0.023655] localhost kernel: pci 0000:0a:00.0: [10de:0142] type 00 class 0x030000 [ 0.023684] localhost kernel: pci 0000:0a:00.0: reg 0x10: [mem 0x92000000-0x92ffffff] [ 0.023699] localhost kernel: pci 0000:0a:00.0: reg 0x14: [mem 0x98000000-0x9fffffff 64bit pref] [ 0.023714] localhost kernel: pci 0000:0a:00.0: reg 0x1c: [mem 0x91000000-0x91ffffff 64bit] [ 0.023731] localhost kernel: pci 0000:0a:00.0: reg 0x30: [mem 0x90000000-0x9001ffff pref] [ 0.023877] localhost kernel: pci 0000:00:0b.0: PCI bridge to [bus 0a] [ 0.023890] localhost kernel: pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff] [ 0.023895] localhost kernel: pci 0000:00:0b.0: bridge window [mem 0x90000000-0x9fffffff] [ 0.023902] localhost kernel: pci 0000:00:0b.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.023969] localhost kernel: pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 0a [ 0.024038] localhost kernel: PCI host bridge to bus 0001:00 [ 0.024048] localhost kernel: pci_bus 0001:00: root bus resource [io 0x820000-0xc1ffff] (bus address [0x0000-0x3fffff]) [ 0.024057] localhost kernel: pci_bus 0001:00: root bus resource [mem 0xfa000000-0xffffffff] [ 0.024065] localhost kernel: pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff] [ 0.024073] localhost kernel: pci_bus 0001:00: root bus resource [mem 0xa0000000-0xefffffff] [ 0.024081] localhost kernel: pci_bus 0001:00: root bus resource [bus 00-ef] [ 0.024090] localhost kernel: pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to ff [ 0.024112] localhost kernel: pci 0001:00:00.0: [106b:0074] type 00 class 0x060000 [ 0.024205] localhost kernel: pci 0001:00:01.0: [1166:0130] type 01 class 0x060400 [ 0.024317] localhost kernel: pci 0001:00:02.0: [1166:0130] type 01 class 0x060400 [ 0.024428] localhost kernel: pci 0001:00:03.0: [1166:0132] type 01 class 0x060400 [ 0.024541] localhost kernel: pci 0001:00:04.0: [1166:0132] type 01 class 0x060400 [ 0.024655] localhost kernel: pci 0001:00:05.0: [1166:0132] type 01 class 0x060400 [ 0.024770] localhost kernel: pci 0001:00:06.0: [1166:0132] type 01 class 0x060400 [ 0.024886] localhost kernel: pci 0001:00:07.0: [106b:0053] type 01 class 0x060400 [ 0.025012] localhost kernel: pci 0001:00:08.0: [106b:0054] type 01 class 0x060400 [ 0.025130] localhost kernel: pci 0001:00:09.0: [106b:0055] type 01 class 0x060400 [ 0.025324] localhost kernel: pci 0001:00:01.0: PCI bridge to [bus 04] [ 0.025398] localhost kernel: pci 0001:05:04.0: [14e4:166a] type 00 class 0x020000 [ 0.025417] localhost kernel: pci 0001:05:04.0: reg 0x10: [mem 0xfa530000-0xfa53ffff 64bit] [ 0.025426] localhost kernel: pci 0001:05:04.0: reg 0x18: [mem 0xfa520000-0xfa52ffff 64bit] [ 0.025474] localhost kernel: pci 0001:05:04.0: PME# supported from D3hot D3cold [ 0.025558] localhost kernel: pci 0001:05:04.1: [14e4:166a] type 00 class 0x020000 [ 0.025576] localhost kernel: pci 0001:05:04.1: reg 0x10: [mem 0xfa510000-0xfa51ffff 64bit] [ 0.025586] localhost kernel: pci 0001:05:04.1: reg 0x18: [mem 0xfa500000-0xfa50ffff 64bit] [ 0.025633] localhost kernel: pci 0001:05:04.1: PME# supported from D3hot D3cold [ 0.025739] localhost kernel: pci 0001:00:02.0: PCI bridge to [bus 05] [ 0.025751] localhost kernel: pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff] [ 0.025849] localhost kernel: pci 0001:00:03.0: PCI bridge to [bus 06] [ 0.025912] localhost kernel: pci 0001:00:04.0: PCI bridge to [bus 07] [ 0.025974] localhost kernel: pci 0001:00:05.0: PCI bridge to [bus 08] [ 0.026037] localhost kernel: pci 0001:00:06.0: PCI bridge to [bus 09] [ 0.026107] localhost kernel: pci 0001:00:07.0: PCI bridge to [bus 02] [ 0.026121] localhost kernel: pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff] [ 0.026126] localhost kernel: pci 0001:00:07.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.026186] localhost kernel: pci 0001:01:07.0: [106b:004f] type 00 class 0xff0000 [ 0.026201] localhost kernel: pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff] [ 0.026310] localhost kernel: pci 0001:01:0b.0: [1033:0035] type 00 class 0x0c0310 [ 0.026328] localhost kernel: pci 0001:01:0b.0: reg 0x10: [mem 0x80082000-0x80082fff] [ 0.026384] localhost kernel: pci 0001:01:0b.0: supports D1 D2 [ 0.026387] localhost kernel: pci 0001:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.026467] localhost kernel: pci 0001:01:0b.1: [1033:0035] type 00 class 0x0c0310 [ 0.026485] localhost kernel: pci 0001:01:0b.1: reg 0x10: [mem 0x80081000-0x80081fff] [ 0.026541] localhost kernel: pci 0001:01:0b.1: supports D1 D2 [ 0.026544] localhost kernel: pci 0001:01:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.026621] localhost kernel: pci 0001:01:0b.2: [1033:00e0] type 00 class 0x0c0320 [ 0.026639] localhost kernel: pci 0001:01:0b.2: reg 0x10: [mem 0x80080000-0x800800ff] [ 0.026695] localhost kernel: pci 0001:01:0b.2: supports D1 D2 [ 0.026697] localhost kernel: pci 0001:01:0b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.026769] localhost kernel: pci 0001:00:08.0: PCI bridge to [bus 01] [ 0.026783] localhost kernel: pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff] [ 0.026788] localhost kernel: pci 0001:00:08.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.026894] localhost kernel: pci 0001:03:0c.0: [1166:0240] type 00 class 0x01018f [ 0.026908] localhost kernel: pci 0001:03:0c.0: reg 0x10: [io 0x820000-0x820007] [ 0.026916] localhost kernel: pci 0001:03:0c.0: reg 0x14: [io 0x820000-0x820003] [ 0.026924] localhost kernel: pci 0001:03:0c.0: reg 0x18: [io 0x820000-0x820007] [ 0.026932] localhost kernel: pci 0001:03:0c.0: reg 0x1c: [io 0x820000-0x820003] [ 0.026940] localhost kernel: pci 0001:03:0c.0: reg 0x20: [io 0x820000-0x82000f] [ 0.026948] localhost kernel: pci 0001:03:0c.0: reg 0x24: [mem 0xfa402000-0xfa403fff] [ 0.027031] localhost kernel: pci 0001:03:0d.0: [106b:0050] type 00 class 0xff0000 [ 0.027044] localhost kernel: pci 0001:03:0d.0: reg 0x10: [mem 0xfa404000-0xfa407fff] [ 0.027143] localhost kernel: pci 0001:03:0e.0: [106b:0052] type 00 class 0x0c0010 [ 0.027159] localhost kernel: pci 0001:03:0e.0: reg 0x10: [mem 0xfa400000-0xfa400fff] [ 0.027211] localhost kernel: pci 0001:03:0e.0: supports D1 D2 [ 0.027214] localhost kernel: pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.027282] localhost kernel: pci 0001:00:09.0: PCI bridge to [bus 03] [ 0.027296] localhost kernel: pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff] [ 0.027301] localhost kernel: pci 0001:00:09.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.027395] localhost kernel: pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 09 [ 0.027517] localhost kernel: PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff] [ 0.027535] localhost kernel: pci 0000:00:0b.0: BAR 15: assigned [mem 0xf1000000-0xf10fffff 64bit pref] [ 0.027546] localhost kernel: pci 0000:00:0b.0: PCI bridge to [bus 0a] [ 0.027554] localhost kernel: pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff] [ 0.027564] localhost kernel: pci 0000:00:0b.0: bridge window [mem 0x90000000-0x9fffffff] [ 0.027574] localhost kernel: pci 0000:00:0b.0: bridge window [mem 0xf1000000-0xf10fffff 64bit pref] [ 0.027586] localhost kernel: pci_bus 0000:00: resource 4 [io 0x10000-0x80ffff] [ 0.027589] localhost kernel: pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff] [ 0.027592] localhost kernel: pci_bus 0000:00: resource 6 [mem 0x90000000-0x9fffffff] [ 0.027595] localhost kernel: pci_bus 0000:0a: resource 0 [io 0x10000-0x1ffff] [ 0.027598] localhost kernel: pci_bus 0000:0a: resource 1 [mem 0x90000000-0x9fffffff] [ 0.027600] localhost kernel: pci_bus 0000:0a: resource 2 [mem 0xf1000000-0xf10fffff 64bit pref] [ 0.027644] localhost kernel: pci 0001:00:01.0: PCI bridge to [bus 04] [ 0.027655] localhost kernel: pci 0001:00:02.0: PCI bridge to [bus 05] [ 0.027664] localhost kernel: pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff] [ 0.027674] localhost kernel: pci 0001:00:03.0: PCI bridge to [bus 06] [ 0.027684] localhost kernel: pci 0001:00:04.0: PCI bridge to [bus 07] [ 0.027695] localhost kernel: pci 0001:00:05.0: PCI bridge to [bus 08] [ 0.027706] localhost kernel: pci 0001:00:06.0: PCI bridge to [bus 09] [ 0.027716] localhost kernel: pci 0001:00:07.0: PCI bridge to [bus 02] [ 0.027725] localhost kernel: pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff] [ 0.027736] localhost kernel: pci 0001:00:08.0: PCI bridge to [bus 01] [ 0.027744] localhost kernel: pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff] [ 0.027755] localhost kernel: pci 0001:00:09.0: PCI bridge to [bus 03] [ 0.027764] localhost kernel: pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff] [ 0.027774] localhost kernel: pci_bus 0001:00: resource 4 [io 0x820000-0xc1ffff] [ 0.027777] localhost kernel: pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff] [ 0.027780] localhost kernel: pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff] [ 0.027783] localhost kernel: pci_bus 0001:00: resource 7 [mem 0xa0000000-0xefffffff] [ 0.027786] localhost kernel: pci_bus 0001:05: resource 1 [mem 0xfa500000-0xfa5fffff] [ 0.027789] localhost kernel: pci_bus 0001:02: resource 1 [mem 0xfa000000-0xfa3fffff] [ 0.027792] localhost kernel: pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff] [ 0.027795] localhost kernel: pci_bus 0001:03: resource 1 [mem 0xfa400000-0xfa4fffff] [ 0.027796] localhost kernel: PCI: Probing PCI hardware done [ 0.034877] localhost kernel: HugeTLB registered 16.0 MiB page size, pre-allocated 0 pages [ 0.035638] localhost kernel: pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.035677] localhost kernel: pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.035682] localhost kernel: vgaarb: loaded [ 0.035917] localhost kernel: SCSI subsystem initialized [ 0.036016] localhost kernel: libata version 3.00 loaded. [ 0.036111] localhost kernel: usbcore: registered new interface driver usbfs [ 0.036134] localhost kernel: usbcore: registered new interface driver hub [ 0.036164] localhost kernel: usbcore: registered new device driver usb [ 0.036285] localhost kernel: EDAC MC: Ver: 3.0.0 [ 0.036771] localhost kernel: NetLabel: Initializing [ 0.036778] localhost kernel: NetLabel: domain hash size = 128 [ 0.036783] localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.036818] localhost kernel: NetLabel: unlabeled traffic allowed by default [ 0.037071] localhost kernel: clocksource: Switched to clocksource timebase [ 0.073254] localhost kernel: VFS: Disk quotas dquot_6.6.0 [ 0.073364] localhost kernel: VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) [ 0.077671] localhost kernel: NET: Registered protocol family 2 [ 0.078031] localhost kernel: TCP established hash table entries: 32768 (order: 2, 262144 bytes) [ 0.078311] localhost kernel: TCP bind hash table entries: 32768 (order: 3, 524288 bytes) [ 0.079102] localhost kernel: TCP: Hash tables configured (established 32768 bind 32768) [ 0.079209] localhost kernel: UDP hash table entries: 2048 (order: 0, 65536 bytes) [ 0.079286] localhost kernel: UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes) [ 0.079549] localhost kernel: NET: Registered protocol family 1 [ 0.079592] localhost kernel: PCI: CLS mismatch (32 != 64), using 128 bytes [ 0.079614] localhost kernel: pci 0001:00:03.0: Found enabled HT MSI Mapping [ 0.079629] localhost kernel: pci 0001:00:04.0: Found enabled HT MSI Mapping [ 0.079643] localhost kernel: pci 0001:00:05.0: Found enabled HT MSI Mapping [ 0.079656] localhost kernel: pci 0001:00:06.0: Found enabled HT MSI Mapping [ 0.079697] localhost kernel: pci 0001:01:0b.0: enabling device (0000 -> 0002) [ 0.147122] localhost kernel: pci 0001:01:0b.1: enabling device (0000 -> 0002) [ 0.217089] localhost kernel: pci 0001:01:0b.2: enabling device (0004 -> 0006) [ 0.217230] localhost kernel: Unpacking initramfs... [ 11.904686] localhost kernel: Freeing initrd memory: 51136K [ 11.905104] localhost kernel: rtas_flash: no firmware flash support [ 11.905875] localhost kernel: audit: initializing netlink subsys (disabled) [ 11.906197] localhost kernel: audit: type=2000 audit(1520175085.899:1): state=initialized audit_enabled=0 res=1 [ 11.907245] localhost kernel: Initialise system trusted keyrings [ 11.907277] localhost kernel: Key type blacklist registered [ 11.907371] localhost kernel: workingset: timestamp_bits=38 max_order=16 bucket_order=0 [ 11.910642] localhost kernel: zbud: loaded [ 11.912556] localhost kernel: SELinux: Registering netfilter hooks [ 12.107079] localhost kernel: random: fast init done [ 12.347050] localhost kernel: NET: Registered protocol family 38 [ 12.347103] localhost kernel: Key type asymmetric registered [ 12.347110] localhost kernel: Asymmetric key parser 'x509' registered [ 12.347258] localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 12.347360] localhost kernel: io scheduler noop registered [ 12.347366] localhost kernel: io scheduler deadline registered [ 12.347465] localhost kernel: io scheduler cfq registered (default) [ 12.347471] localhost kernel: io scheduler mq-deadline registered [ 12.347608] localhost kernel: atomic64_test: passed [ 12.347890] localhost kernel: Using unsupported 1280x1024 NVDA,Display-A at 98020000, depth=8, pitch=1536 [ 12.375719] localhost kernel: Console: switching to colour frame buffer device 160x64 [ 12.403368] localhost kernel: fb0: Open Firmware frame buffer device on /pci@0,f0000000/NVDA,Parent@0/NVDA,Display-A@0 [ 12.403952] localhost kernel: Linux agpgart interface v0.103 [ 12.404292] localhost kernel: MacIO PCI driver attached to Shasta chipset [ 12.405369] localhost kernel: Uniform Multi-Platform E-IDE driver [ 12.405582] localhost kernel: ide-gd driver 1.18 [ 12.405879] localhost kernel: pata-pci-macio 0001:03:0d.0: enabling device (0004 -> 0006) [ 12.427090] localhost kernel: pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset Shasta ATA-6, Apple bus ID 3 [ 12.427792] localhost kernel: scsi host0: pata_macio [ 12.427999] localhost kernel: ata1: PATA max UDMA/133 irq 38 [ 12.428254] localhost kernel: libphy: Fixed MDIO Bus: probed [ 12.428493] localhost kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.428733] localhost kernel: ehci-pci: EHCI PCI platform driver [ 12.428975] localhost kernel: ehci-pci 0001:01:0b.2: EHCI Host Controller [ 12.429209] localhost kernel: ehci-pci 0001:01:0b.2: new USB bus registered, assigned bus number 1 [ 12.429691] localhost kernel: ehci-pci 0001:01:0b.2: irq 70, io mem 0x80080000 [ 12.457078] localhost kernel: ehci-pci 0001:01:0b.2: USB 2.0 started, EHCI 1.00 [ 12.457365] localhost kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 12.457584] localhost kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.457815] localhost kernel: usb usb1: Product: EHCI Host Controller [ 12.457972] localhost kernel: usb usb1: Manufacturer: Linux 4.13.9-300.fc27.ppc64 ehci_hcd [ 12.458186] localhost kernel: usb usb1: SerialNumber: 0001:01:0b.2 [ 12.458546] localhost kernel: hub 1-0:1.0: USB hub found [ 12.458680] localhost kernel: hub 1-0:1.0: 5 ports detected [ 12.459184] localhost kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 12.459416] localhost kernel: ohci-pci: OHCI PCI platform driver [ 12.459605] localhost kernel: ohci-pci 0001:01:0b.0: OHCI PCI host controller [ 12.459925] localhost kernel: ohci-pci 0001:01:0b.0: new USB bus registered, assigned bus number 2 [ 12.460255] localhost kernel: ohci-pci 0001:01:0b.0: irq 70, io mem 0x80082000 [ 12.546975] localhost kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.547195] localhost kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.547422] localhost kernel: usb usb2: Product: OHCI PCI host controller [ 12.547590] localhost kernel: usb usb2: Manufacturer: Linux 4.13.9-300.fc27.ppc64 ohci_hcd [ 12.547804] localhost kernel: usb usb2: SerialNumber: 0001:01:0b.0 [ 12.548171] localhost kernel: hub 2-0:1.0: USB hub found [ 12.548305] localhost kernel: hub 2-0:1.0: 3 ports detected [ 12.548666] localhost kernel: ohci-pci 0001:01:0b.1: OHCI PCI host controller [ 12.548918] localhost kernel: ohci-pci 0001:01:0b.1: new USB bus registered, assigned bus number 3 [ 12.549249] localhost kernel: ohci-pci 0001:01:0b.1: irq 70, io mem 0x80081000 [ 12.627461] localhost kernel: ata1.00: ATAPI: HL-DT-ST DVD-RW GWA-4165B, C006, max UDMA/66 [ 12.636974] localhost kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.645429] localhost kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.653911] localhost kernel: usb usb3: Product: OHCI PCI host controller [ 12.662391] localhost kernel: usb usb3: Manufacturer: Linux 4.13.9-300.fc27.ppc64 ohci_hcd [ 12.667408] localhost kernel: ata1.00: configured for UDMA/66 [ 12.679435] localhost kernel: usb usb3: SerialNumber: 0001:01:0b.1 [ 12.687944] localhost kernel: blk_queue_max_segment_size: set to minimum 65536 [ 12.688152] localhost kernel: hub 3-0:1.0: USB hub found [ 12.688168] localhost kernel: hub 3-0:1.0: 2 ports detected [ 12.688372] localhost kernel: uhci_hcd: USB Universal Host Controller Interface driver [ 12.688523] localhost kernel: usbcore: registered new interface driver usbserial [ 12.688537] localhost kernel: usbcore: registered new interface driver usbserial_generic [ 12.688548] localhost kernel: usbserial: USB Serial support registered for generic [ 12.688803] localhost kernel: mousedev: PS/2 mouse device common for all mice [ 12.737350] localhost kernel: rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 12.737534] localhost kernel: device-mapper: uevent: version 1.0.3 [ 12.737678] localhost kernel: device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 12.767086] localhost kernel: pmac64_cpufreq: Registering G5 CPU frequency driver [ 12.767088] localhost kernel: pmac64_cpufreq: Frequency method: SCOM, Voltage method: GPIO [ 12.767089] localhost kernel: pmac64_cpufreq: Low: 1000 Mhz, High: 2000 Mhz, Cur: 2000 MHz [ 12.767185] localhost kernel: hidraw: raw HID events driver (C) Jiri Kosina [ 12.767276] localhost kernel: usbcore: registered new interface driver usbhid [ 12.767276] localhost kernel: usbhid: USB HID core driver [ 12.767378] localhost kernel: drop_monitor: Initializing network drop monitor service [ 12.767509] localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.767534] localhost kernel: Initializing XFRM netlink socket [ 12.767879] localhost kernel: NET: Registered protocol family 10 [ 12.776254] localhost kernel: Segment Routing with IPv6 [ 12.776299] localhost kernel: mip6: Mobile IPv6 [ 12.776304] localhost kernel: NET: Registered protocol family 17 [ 12.776374] localhost kernel: Running MSI bitmap self-tests ... [ 12.776831] localhost kernel: registered taskstats version 1 [ 12.776850] localhost kernel: Loading compiled-in X.509 certificates [ 12.879512] localhost kernel: usb 1-1: new high-speed USB device number 2 using ehci-pci [ 12.882104] localhost kernel: Loaded X.509 cert 'Fedora kernel signing key: c8c3e52204a80187568063a7960c8a7cd369fa10' [ 12.882203] localhost kernel: zswap: loaded using pool lzo/zbud [ 12.890471] localhost kernel: Key type big_key registered [ 12.898352] localhost kernel: Key type encrypted registered [ 12.954195] localhost kernel: rtc-generic rtc-generic: setting system clock to 2018-03-04 14:51:27 UTC (1520175087) [ 12.965353] localhost kernel: scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4165B C006 PQ: 0 ANSI: 5 [ 12.974127] localhost kernel: ata1.00: K2/Shasta alignment limits applied [ 13.021121] localhost kernel: sr 0:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 13.037202] localhost kernel: cdrom: Uniform CD-ROM driver Revision: 3.20 [ 13.046496] localhost kernel: sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 13.046635] localhost kernel: sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 13.062467] localhost kernel: Freeing unused kernel memory: 6016K [ 13.071351] localhost kernel: This architecture does not have kernel memory protection. [ 13.098964] localhost kernel: usb 1-1: New USB device found, idVendor=148f, idProduct=5370 [ 13.108025] localhost kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 13.117149] localhost kernel: usb 1-1: Product: 802.11 n WLAN [ 13.126124] localhost kernel: usb 1-1: Manufacturer: Ralink [ 13.135057] localhost kernel: usb 1-1: SerialNumber: 1.0 [ 13.277080] localhost kernel: usb 1-2: new high-speed USB device number 3 using ehci-pci [ 13.316919] localhost systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 13.336171] localhost systemd[1]: Detected architecture ppc64. [ 13.345649] localhost systemd[1]: Running in initial RAM disk. [ 13.383743] localhost systemd[1]: No hostname configured. [ 13.393335] localhost systemd[1]: Set hostname to <localhost>. [ 13.403140] localhost systemd[1]: Initializing machine ID from random generator. [ 13.485022] localhost kernel: usb 1-2: New USB device found, idVendor=058f, idProduct=6387 [ 13.495051] localhost kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 13.504745] localhost kernel: usb 1-2: Product: Mass Storage [ 13.514400] localhost kernel: usb 1-2: Manufacturer: Generic [ 13.523844] localhost kernel: usb 1-2: SerialNumber: 2070E8A6 [ 14.031184] localhost systemd[1]: Listening on Journal Socket (/dev/log). [ 14.047087] localhost kernel: usb 2-2: new low-speed USB device number 2 using ohci-pci [ 14.060040] localhost systemd[1]: Reached target Initrd Root Device. [ 14.079251] localhost systemd[1]: Reached target Local File Systems. [ 14.099104] localhost systemd[1]: Listening on Journal Audit Socket. [ 14.342170] localhost kernel: usb 2-2: New USB device found, idVendor=1bcf, idProduct=0053 [ 14.351713] localhost kernel: usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 14.361328] localhost kernel: usb 2-2: Product: USB Optical Mouse [ 14.409576] localhost kernel: input: USB Optical Mouse as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2:1.0/0003:1BCF:0053.0001/input/input0 [ 14.477397] localhost kernel: hid-generic 0003:1BCF:0053.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Optical Mouse ] on usb-0001:01:0b.0-2/input0 [ 14.897122] localhost kernel: usb 3-2: new low-speed USB device number 2 using ohci-pci [ 15.009419] localhost kernel: audit: type=1130 audit(1520175089.562:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 15.035430] localhost systemd-journald[159]: Journal started [ 15.035898] localhost systemd-journald[159]: Runtime journal (/run/log/journal/7444064ef2fa422cb291a5a3166a19ad) is 8.0M, max 122.1M, 114.1M free. [ 15.036092] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 15.037729] localhost dracut-cmdline[165]: dracut-27 (Twenty Seven) dracut-046-5.fc27 [ 15.037729] localhost dracut-cmdline[165]: Using kernel command line parameters: BOOT_IMAGE=/ppc/ppc64/vmlinuz ro [ 15.058318] localhost dracut-cmdline[165]: Loading Fedora 27 ppc64p7 installer... [ 15.059003] localhost multipathd[170]: --------start up-------- [ 15.059003] localhost multipathd[170]: read /etc/multipath.conf [ 15.059003] localhost multipathd[170]: path checkers start up [ 15.063551] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 15.070603] localhost kernel: audit: type=1130 audit(1520175089.612:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 15.103237] localhost kernel: audit: type=1130 audit(1520175089.656:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 15.119803] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 15.121703] localhost systemd[1]: Started Create Static Device Nodes in /dev. [ 15.159510] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 15.141950] localhost kernel: audit: type=1130 audit(1520175089.694:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 15.231594] localhost kernel: usb 3-2: New USB device found, idVendor=0c45, idProduct=7603 [ 15.244185] localhost kernel: usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 15.256750] localhost kernel: usb 3-2: Product: USB Keyboard [ 15.278200] localhost kernel: input: USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.1/usb3/3-2/3-2:1.0/0003:0C45:7603.0002/input/input1 [ 15.357453] localhost kernel: hid-generic 0003:0C45:7603.0002: input,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0001:01:0b.1-2/input0 [ 15.379323] localhost kernel: input: USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.1/usb3/3-2/3-2:1.1/0003:0C45:7603.0003/input/input2 [ 15.457328] localhost kernel: hid-generic 0003:0C45:7603.0003: input,hiddev96,hidraw2: USB HID v1.11 Keyboard [USB Keyboard] on usb-0001:01:0b.1-2/input1 [ 15.647222] localhost dracut-cmdline[165]: rd.luks=0: removing cryptoluks activation [ 15.717304] localhost dracut-cmdline[165]: rd.lvm=0: removing LVM activation [ 15.920245] localhost systemd[1]: Started dracut cmdline hook. [ 15.940059] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 15.953166] localhost systemd[1]: Starting dracut pre-udev hook... [ 15.933771] localhost kernel: audit: type=1130 audit(1520175090.486:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 15.970260] localhost systemd[1]: Starting Open-iSCSI... [ 16.024081] localhost kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 16.050631] localhost kernel: Loading iSCSI transport class v2.0-870. [ 16.075378] localhost kernel: iscsi: registered transport (tcp) [ 16.097019] localhost kernel: alua: device handler registered [ 16.118238] localhost kernel: emc: device handler registered [ 16.145657] localhost iscsid[396]: iSCSI logger with pid=411 started! [ 16.145933] localhost systemd[1]: iscsid.service: Failed to read PID from file /var/run/iscsid.pid: Invalid argument [ 16.148003] localhost iscsid[411]: iSCSI daemon with pid=412 started! [ 16.148633] localhost iscsid[411]: can't open InitiatorName configuration file /etc/iscsi/initiatorname.iscsi [ 16.149046] localhost iscsid[411]: Warning: InitiatorName file /etc/iscsi/initiatorname.iscsi does not exist or does not contain a properly formatted InitiatorName. If using software iscsi (iscsi_tcp or ib_iser) or partial offload (bnx2i or cxgbi iscsi), you may not be able to log into or [ 16.149406] localhost iscsid[411]: can't open InitiatorAlias configuration file /etc/iscsi/initiatorname.iscsi [ 16.149751] localhost iscsid[411]: can't open iscsid.safe_logout configuration file /etc/iscsi/iscsid.conf [ 16.139458] localhost kernel: hp_sw: device handler registered [ 16.163507] localhost kernel: rdac: device handler registered [ 16.230086] localhost systemd[1]: Started Open-iSCSI. [ 16.243145] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsid comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 16.250189] localhost kernel: audit: type=1130 audit(1520175090.802:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsid comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 16.567092] localhost kernel: raid6: altivecx1 gen() 2521 MB/s [ 16.757084] localhost kernel: raid6: altivecx2 gen() 3197 MB/s [ 16.947082] localhost kernel: raid6: altivecx4 gen() 3339 MB/s [ 17.137099] localhost kernel: raid6: altivecx8 gen() 2462 MB/s [ 17.327114] localhost kernel: raid6: int64x1 gen() 1135 MB/s [ 17.517140] localhost kernel: raid6: int64x1 xor() 161 MB/s [ 17.707089] localhost kernel: raid6: int64x2 gen() 1648 MB/s [ 17.897182] localhost kernel: raid6: int64x2 xor() 199 MB/s [ 18.087102] localhost kernel: raid6: int64x4 gen() 1743 MB/s [ 18.277083] localhost kernel: raid6: int64x4 xor() 443 MB/s [ 18.467084] localhost kernel: raid6: int64x8 gen() 1158 MB/s [ 18.657090] localhost kernel: raid6: int64x8 xor() 435 MB/s [ 18.679813] localhost kernel: raid6: using algorithm altivecx4 gen() 3339 MB/s [ 18.702700] localhost kernel: raid6: using intx1 recovery algorithm [ 18.728406] localhost kernel: xor: measuring software checksum speed [ 18.837079] localhost kernel: 8regs : 4800.000 MB/sec [ 18.947077] localhost kernel: 8regs_prefetch: 5388.800 MB/sec [ 19.057072] localhost kernel: 32regs : 4697.600 MB/sec [ 19.167077] localhost kernel: 32regs_prefetch: 5920.000 MB/sec [ 19.277073] localhost kernel: altivec : 7385.600 MB/sec [ 19.289401] localhost kernel: xor: using function: altivec (7385.600 MB/sec) [ 19.304388] localhost kernel: async_tx: api initialized (async) [ 19.397315] localhost kernel: device-mapper: multipath round-robin: version 1.2.0 loaded [ 19.493161] localhost kernel: RPC: Registered named UNIX socket transport module. [ 19.505605] localhost kernel: RPC: Registered udp transport module. [ 19.517895] localhost kernel: RPC: Registered tcp transport module. [ 19.529987] localhost kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. [ 19.839959] localhost rpc.statd[455]: Version 2.1.1 starting [ 19.876633] localhost rpc.statd[455]: Initializing NSM state [ 19.877698] localhost rpc.statd[455]: Running as root. chown /var/lib/nfs/statd to choose different user [ 19.928851] localhost dracut-pre-udev[395]: rpc.idmapd: conf_reinit: open ("(null)", O_RDONLY) failed [ 19.947521] localhost dracut-pre-udev[395]: rpc.idmapd: conf_reinit: open ("(null)", O_RDONLY) failed [ 19.997032] localhost systemd[1]: Started dracut pre-udev hook. [ 20.012311] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 20.012555] localhost systemd[1]: Starting udev Kernel Device Manager... [ 20.016073] localhost kernel: audit: type=1130 audit(1520175094.568:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 20.247313] localhost systemd[1]: Started udev Kernel Device Manager. [ 20.269738] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 20.274189] localhost systemd[1]: Starting dracut pre-trigger hook... [ 20.276780] localhost kernel: audit: type=1130 audit(1520175094.829:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 20.346774] localhost dracut-pre-trigger[488]: rd.dm=0: removing DM RAID activation [ 20.806912] localhost dracut-pre-trigger[488]: rd.md.imsm=0: no MD RAID for imsm/isw raids [ 21.044740] localhost dracut-pre-trigger[488]: rd.md.ddf=0: no MD RAID for SNIA ddf raids [ 21.526312] localhost dracut-pre-trigger[488]: rd.md=0: removing MD RAID activation [ 22.110968] localhost systemd[1]: Started dracut pre-trigger hook. [ 22.145682] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.145914] localhost systemd[1]: Starting udev Coldplug all Devices... [ 22.129378] localhost kernel: audit: type=1130 audit(1520175096.682:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.438346] localhost systemd[1]: Mounting Kernel Configuration File System... [ 22.468687] localhost systemd[1]: Mounted Kernel Configuration File System. [ 22.721962] localhost kernel: synth uevent: /devices/vio: failed to send uevent [ 22.721972] localhost kernel: vio vio: uevent: failed to send synthetic uevent [ 22.746348] localhost kernel: pps_core: LinuxPPS API ver. 1 registered [ 22.757145] localhost kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 22.770911] localhost systemd[1]: Started udev Coldplug all Devices. [ 22.805680] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.808612] localhost systemd[1]: Starting dracut initqueue hook... [ 22.781191] localhost kernel: audit: type=1130 audit(1520175097.334:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.783854] localhost kernel: PTP clock support registered [ 22.851416] localhost systemd[1]: Reached target System Initialization. [ 22.834387] localhost kernel: pmac_zilog: 0.6 (Benjamin Herrenschmidt benh@kernel.crashing.org) [ 22.834580] localhost kernel: 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 22.860586] localhost kernel: tg3.c:v3.137 (May 11, 2014) [ 22.879567] localhost systemd[1]: Listening on Open-iSCSI iscsiuio Socket. [ 22.914448] localhost systemd[1]: Reached target Sockets. [ 22.899133] localhost kernel: 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 24, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 22.931408] localhost systemd[1]: Reached target Basic System. [ 22.957022] localhost kernel: usb-storage 1-2:1.0: USB Mass Storage device detected [ 22.960456] localhost kernel: sata_svw 0001:03:0c.0: version 2.3 [ 22.960544] localhost kernel: sata_svw 0001:03:0c.0: Using 32-bit DMA via iommu [ 22.981359] localhost kernel: scsi host1: sata_svw [ 23.036976] localhost kernel: tg3 0001:05:04.0: Using 32-bit DMA via iommu [ 23.052869] localhost kernel: scsi host2: sata_svw [ 23.093316] localhost kernel: tg3 0001:05:04.0 eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:14:51:68:33:0e [ 23.104106] localhost kernel: tg3 0001:05:04.0 eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 23.115051] localhost kernel: tg3 0001:05:04.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 23.126040] localhost kernel: tg3 0001:05:04.0 eth0: dma_rwctrl[76144000] dma_mask[40-bit] [ 23.150928] localhost kernel: scsi host3: sata_svw [ 23.183030] localhost kernel: scsi host4: sata_svw [ 23.197278] localhost systemd-udevd[576]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 23.207127] localhost kernel: scsi host5: usb-storage 1-2:1.0 [ 23.207221] localhost kernel: ata2: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402000 irq 18 [ 23.207225] localhost kernel: ata3: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402100 irq 18 [ 23.207228] localhost kernel: ata4: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402200 irq 18 [ 23.207231] localhost kernel: ata5: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402300 irq 18 [ 23.244082] localhost kernel: tg3 0001:05:04.1: Using 32-bit DMA via iommu [ 23.244593] localhost kernel: tg3 0001:05:04.1 eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:14:51:68:33:0f [ 23.244597] localhost kernel: tg3 0001:05:04.1 eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 23.244600] localhost kernel: tg3 0001:05:04.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 23.244603] localhost kernel: tg3 0001:05:04.1 eth1: dma_rwctrl[76144000] dma_mask[40-bit] [ 23.322832] localhost kernel: firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002) [ 23.338907] localhost kernel: usbcore: registered new interface driver usb-storage [ 23.354297] localhost kernel: usbcore: registered new interface driver uas [ 23.384628] localhost systemd-udevd[577]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 23.392024] localhost kernel: tg3 0001:05:04.0 enP1p5s4f0: renamed from eth0 [ 23.408052] localhost kernel: firewire_ohci 0001:03:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 23.471126] localhost systemd-udevd[576]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 23.479324] localhost kernel: tg3 0001:05:04.1 enP1p5s4f1: renamed from eth1 [ 23.638680] localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 23.657103] localhost kernel: ata2.00: ATA-7: WDC WD1600JS-41MVB1, 10.02E01, max UDMA/133 [ 23.669173] localhost kernel: ata2.00: 312581808 sectors, multi 0: LBA48 [ 23.699475] localhost systemd[1]: Reloading. [ 23.709579] localhost kernel: ata2.00: configured for UDMA/133 [ 23.721766] localhost kernel: scsi 1:0:0:0: Direct-Access ATA WDC WD1600JS-41M 2E01 PQ: 0 ANSI: 5 [ 23.827691] localhost kernel: sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 23.840102] localhost kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 23.857418] localhost kernel: sd 1:0:0:0: [sda] Write Protect is off [ 23.868976] localhost kernel: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.877207] localhost kernel: sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.908171] localhost kernel: sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 [ 23.927389] localhost kernel: firewire_core 0001:03:0e.0: created device fw0: GUID 001451fffe356878, S800 [ 23.939743] localhost kernel: sd 1:0:0:0: [sda] Attached SCSI disk [ 23.957153] localhost kernel: firewire_core 0001:03:0e.0: phy config: new root=ffc1, gap_count=5 [ 24.198655] localhost kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 24.237488] localhost kernel: ata3.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7 [ 24.248668] localhost kernel: ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 24.317591] localhost kernel: ata3.00: configured for UDMA/133 [ 24.328724] localhost kernel: scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C 0-41 PQ: 0 ANSI: 5 [ 24.399619] localhost kernel: scsi 5:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [ 24.427506] localhost kernel: sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 24.427695] localhost kernel: sd 2:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 24.427719] localhost kernel: sd 2:0:0:0: [sdc] Write Protect is off [ 24.427723] localhost kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 24.427761] localhost kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.428940] localhost kernel: sd 5:0:0:0: [sdb] 7886848 512-byte logical blocks: (4.04 GB/3.76 GiB) [ 24.430061] localhost kernel: sd 5:0:0:0: [sdb] Write Protect is off [ 24.430064] localhost kernel: sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 24.431190] localhost kernel: sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 24.439716] localhost kernel: sdb: sdb1 [ 24.443191] localhost kernel: sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 24.523928] localhost kernel: sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 24.535691] localhost kernel: sdc: sdc1 sdc4 [ 24.568942] localhost kernel: sd 2:0:0:0: [sdc] Attached SCSI disk [ 24.927731] localhost multipath[661]: sdb: can't store path info [ 24.931722] localhost multipathd[170]: sdb: add path (uevent) [ 24.934812] localhost multipathd[170]: uevent trigger error [ 25.667091] localhost kernel: ata4: failed to resume link (SControl 0) [ 25.685135] localhost kernel: ata4: SATA link down (SStatus 0 SControl 0) [ 26.797111] localhost kernel: ata5: failed to resume link (SControl 0) [ 26.814882] localhost kernel: ata5: SATA link down (SStatus 0 SControl 0) [ 27.413110] localhost multipathd[170]: sdc: add path (uevent) [ 28.764936] localhost multipathd[170]: sda: add path (uevent) [ 63.822795] localhost kernel: random: crng init done [ 338.538900] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 340.109550] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 341.399165] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 342.669012] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 343.928989] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 345.169000] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 346.449000] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 347.739033] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 348.998843] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 350.279000] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 351.579075] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 352.838940] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 354.109532] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 355.428883] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 356.718822] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 358.018923] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 359.329365] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 360.609119] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 361.908995] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 363.218984] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 364.528879] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 365.839550] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 367.149680] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 368.469682] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 369.789504] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 371.098889] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 372.409268] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 373.718740] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 375.009017] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 376.308824] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 377.608895] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 378.928851] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 380.218903] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 381.529589] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 382.849458] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 384.149727] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 385.449487] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 386.758823] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 388.049527] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 389.318673] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 390.588872] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 391.859233] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 393.098930] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 394.359085] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 395.629084] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 396.898958] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 398.168870] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 399.439045] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 400.729485] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 401.978813] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 403.228975] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 404.478930] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 405.728742] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 407.029348] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 408.298718] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 409.609294] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 410.878960] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 412.179772] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 413.458908] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 414.728851] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 415.998804] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 417.308997] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 418.608813] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 419.898899] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 421.209149] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 422.519111] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 423.829491] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 425.139248] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 426.448862] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 427.759196] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 429.068784] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 430.358662] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 431.649555] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 432.959570] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 434.248803] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 435.548892] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 436.838780] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 438.148893] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 439.439064] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 440.698777] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 442.009568] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 443.298896] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 444.588968] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 445.858982] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 447.128745] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 448.398960] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 449.708831] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 450.999024] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 452.268883] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 453.529398] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 454.818784] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 456.109758] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 457.419203] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 458.728938] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 459.998964] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 461.288822] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 462.599138] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 463.888791] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 465.159083] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 466.469617] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 467.738752] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 469.028940] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 470.319454] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 471.588831] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 472.898879] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 474.208876] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 475.459138] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 476.768977] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 478.038906] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 479.328934] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 480.639690] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 481.898759] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 483.158809] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 484.469496] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 485.719064] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 487.028954] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 488.298878] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 489.558905] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 490.838915] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 492.139517] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout - starting timeout scripts [ 492.145576] localhost dracut-initqueue[586]: Warning: Could not boot. [ 492.151641] localhost dracut-initqueue[586]: Warning: /dev/root does not exist [ 492.393430] localhost systemd[1]: Starting Setup Virtual Console... [ 492.617903] localhost systemd[1]: Started Setup Virtual Console. [ 492.624996] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 492.625222] localhost systemd[1]: Starting Dracut Emergency Shell... [ 492.625819] localhost audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 492.627476] localhost kernel: audit: type=1130 audit(1520175567.180:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 492.632864] localhost kernel: audit: type=1131 audit(1520175567.180:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
--- Rondan Rino Certificado en LPIC-3 LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA
Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
On Mar 4, 2018, at 11:56, Rino Rondan villadalmine@gmail.com wrote:
I tried booting from here in fedora27 net install ppc64 boot ud:,\boot\grub\powerpc-ieee1275\core.elf
Load everything, but hang after detect disk in random: crng init done Do I need to add some parameter in grub.cfg to avoid that ?
Rondan Rino Certificado en LPIC-3 LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA
Blog:http://www.itrestauracion.com.ar http://www.itrestauracion.com.ar/ Cv: http://cv.rinorondan.com.ar http://cv.rinorondan.com.ar/ http://counter.li.org http://counter.li.org/ Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
On Mar 4, 2018, at 09:54, Rino Rondan <rrondan@itrestauracion.com.ar mailto:rrondan@itrestauracion.com.ar> wrote:
I found !! sorry
---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA
Phone: +1210 888 0738
Blog:http://www.itrestauracion.com.ar http://www.itrestauracion.com.ar/
Cv: http://cv.rinorondan.com.ar http://cv.rinorondan.com.ar/
http://counter.li.org http://counter.li.org/ Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
Sent from ProtonMail, encrypted email based in Switzerland.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On March 4, 2018 9:51 AM, Rino Rondan <rrondan@itrestauracion.com.ar mailto:rrondan@itrestauracion.com.ar> wrote:
Hi,
Where I can download the ppc64 f18, I can not find in http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/ http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/
Regards
---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA
Phone: +1210 888 0738
Blog:http://www.itrestauracion.com.ar http://www.itrestauracion.com.ar/
Cv: http://cv.rinorondan.com.ar http://cv.rinorondan.com.ar/
http://counter.li.org http://counter.li.org/ Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
Sent from ProtonMail, encrypted email based in Switzerland.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On March 4, 2018 9:39 AM, Rino Rondan rrondan@itrestauracion.com.ar mailto:rrondan@itrestauracion.com.ar wrote:
Hi, Thanks for the info!!
Can I update from fedora18 to fedora 27¿? I did only one upgrade from one distro release to another, no jumping 18 to 27? How did you do it ? And what kind of boot loader uses , because im doing dd of iso image in a pen drive, but I do not know how to boot in OpenFirmware, It worked me in other distros with yaboot and ofwboot or other binaries, but not with Fedora.
Also, I want Xorg running to use as desktop to replace my old intel arch.
I will test your recommendation!!
Regards
---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA
Phone: +1210 888 0738
Blog:http://www.itrestauracion.com.ar http://www.itrestauracion.com.ar/
Cv: http://cv.rinorondan.com.ar http://cv.rinorondan.com.ar/
http://counter.li.org http://counter.li.org/ Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
Sent from ProtonMail, encrypted email based in Switzerland.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On March 4, 2018 7:43 AM, Laurent Vivier laurent@vivier.eu mailto:laurent@vivier.eu wrote:
Le 04/03/2018 à 03:00, Rino Rondan a écrit :
Hi,
Im trying to install Fedora 27 in my PowerPc but I can not boot it, I tested ubuntu and booted ok with yaboot, also tested openbsd and freebsd with openfirwmare boot. I saw this link https://github.com/masterzorag/G5_ppc64-linux https://github.com/masterzorag/G5_ppc64-linux but I can not replicate it or I did not understand why so many steps and why iso will not work for him.
I have problem with Nvidia driver in all tested distros... Any experience or recomendation ? Im user of Fedora about more than 8 years but I see for ppc64 some distros have less packages than others...
I have two PowerMac G5 running Fedora 27, but the only way to install it
is to install Fedora 18 and upgrade until Fedora 27. If I remember
correctly installer after F18 are broken. The problem with "nouveau"
driver should be fixed since kernel 4.3 with:
25d295882a1a drm/nouveau/bios: fix OF loading
I have a small VGA LCD plugged on my Pmacs and I use this kernel cmdline
parameter:
video=DVI-I-1:640x480@60
But I never starts desktop session, only a console.
Thanks,
Laurent
ppc mailing list -- ppc@lists.fedoraproject.org mailto:ppc@lists.fedoraproject.org
To unsubscribe send an email to ppc-leave@lists.fedoraproject.org mailto:ppc-leave@lists.fedoraproject.org
ppc mailing list -- ppc@lists.fedoraproject.org mailto:ppc@lists.fedoraproject.org To unsubscribe send an email to ppc-leave@lists.fedoraproject.org mailto:ppc-leave@lists.fedoraproject.org
Le 04/03/2018 à 15:56, Rino Rondan a écrit :
I tried booting from here in fedora27 net install ppc64 boot ud:,\boot\grub\powerpc-ieee1275\core.elf
Load everything, but hang after detect disk in random: crng init done Do I need to add some parameter in grub.cfg to avoid that ?
I think GRUB in F18 doesn't support PowerMac. You should use yaboot instead.
boot ud:,\ppc\chrp\yaboot
Thanks, Laurent
Ahh you mean copy files for yaboot of f18 in F27 image ?
---Rondan RinoCertificado en LPIC-3LPI ID:LPI000209832Verification Code:gbblvwyfxuRed Hat Certified Engineer -- RHCE -- RHCVA
Blog:http://www.itrestauracion.com.arCv: http://cv.rinorondan.com.arhttp://counter.li.org Linux User -> #517918Viva La Santa Federacion!!Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
On Sun, Mar 4, 2018 at 1:02 PM -0300, "Laurent Vivier" laurent@vivier.eu wrote:
Le 04/03/2018 à 15:56, Rino Rondan a écrit :
I tried booting from here in fedora27 net install ppc64 boot ud:,\boot\grub\powerpc-ieee1275\core.elf
Load everything, but hang after detect disk in random: crng init done Do I need to add some parameter in grub.cfg to avoid that ?
I think GRUB in F18 doesn't support PowerMac. You should use yaboot instead.
boot ud:,\ppc\chrp\yaboot
Thanks, Laurent
Le 04/03/2018 à 18:17, Rino Rondan a écrit :
Ahh you mean copy files for yaboot of f18 in F27 image ?
No, booting F18 CD using yaboot instead of grub.
Then, you install F18 with yaboot bootloader, and upgrade to F26 (step by step F19 -> F20 -> ... -> F27), and at this tage you can switch the bootloader to GRUB.
Thanks, Laurent
Ahhh!! I will check because I did not found yaboot file in f18 iso, but i get you!! Thanks!!!
--- Rondan Rino [Certificado en LPIC-3 ](https://cs.lpi.org/caf/Xamman/certification)
LPI ID:LPI000209832 Verification Code:gbblvwyfxu [Red Hat Certified Engineer -- RHCE -- RHCVA](https://www.redhat.com/rhtapps/certification/verify/?certId=120-175-658)
Phone:+1210 888 0738
Blog:[http://www.itrestauracion.com.ar%5D(http://www.itrestauracion.com.ar/) Cv:[ http://cv.rinorondan.com.ar%5D(http://www.rinorondan.com.ar/) [http://counter.li.org%5D(http://counter.li.org/) Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
Sent from [ProtonMail](https://protonmail.ch), encrypted email based in Switzerland.
Sent from ProtonMail Mobile
On Sun, Mar 4, 2018 at 2:20 PM, Laurent Vivier laurent@vivier.eu wrote:
Le 04/03/2018 à 18:17, Rino Rondan a écrit : > Ahh you mean copy files for yaboot of f18 in F27 image ? No, booting F18 CD using yaboot instead of grub. Then, you install F18 with yaboot bootloader, and upgrade to F26 (step by step F19 -> F20 -> ... -> F27), and at this tage you can switch the bootloader to GRUB. Thanks, Laurent
HI, I checked again, create the disk in openfirmware dd if=Fedora-18-ppc64-netinst.iso of=/dev/disk2 bs=1m conv=sync boot ud:,\ppc\chrp\yaboot then appear boot ud:,\ppc\chrp\yaboot load-size=4077c adler32=c211ccd2 Loading ELF
$SETENV: invalid number
ok prompt
I did several test in openfirmware maybe I have to reset some config ??
--- Rondan Rino [Certificado en LPIC-3 ](https://cs.lpi.org/caf/Xamman/certification) LPI ID:LPI000209832 Verification Code:gbblvwyfxu [Red Hat Certified Engineer -- RHCE -- RHCVA](https://www.redhat.com/rhtapps/certification/verify/?certId=120-175-658)
Phone:+1210 888 0738
Blog:[http://www.itrestauracion.com.ar%5D(http://www.itrestauracion.com.ar/) Cv:[ http://cv.rinorondan.com.ar%5D(http://www.rinorondan.com.ar/) [http://counter.li.org%5D(http://counter.li.org/) Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
Sent from [ProtonMail](https://protonmail.ch), encrypted email based in Switzerland.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On March 4, 2018 3:43 PM, Rino Rondan rrondan@itrestauracion.com.ar wrote:
Ahhh!! I will check because I did not found yaboot file in f18 iso, but i get you!! Thanks!!!
Rondan Rino [Certificado en LPIC-3 ](https://cs.lpi.org/caf/Xamman/certification) LPI ID:LPI000209832 Verification Code:gbblvwyfxu [Red Hat Certified Engineer -- RHCE -- RHCVA](https://www.redhat.com/rhtapps/certification/verify/?certId=120-175-658)
Phone:+1210 888 0738
Blog:[http://www.itrestauracion.com.ar%5D(http://www.itrestauracion.com.ar/) Cv:[ http://cv.rinorondan.com.ar%5D(http://www.rinorondan.com.ar/) [http://counter.li.org%5D(http://counter.li.org/) Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
Sent from [ProtonMail](https://protonmail.ch), encrypted email based in Switzerland.
Sent from ProtonMail Mobile
On Sun, Mar 4, 2018 at 2:20 PM, Laurent Vivier laurent@vivier.eu wrote:
Le 04/03/2018 à 18:17, Rino Rondan a écrit : > Ahh you mean copy files for yaboot of f18 in F27 image ? No, booting F18 CD using yaboot instead of grub. Then, you install F18 with yaboot bootloader, and upgrade to F26 (step by step F19 -> F20 -> ... -> F27), and at this tage you can switch the bootloader to GRUB. Thanks, Laurent
Le 04/03/2018 à 21:36, Rino Rondan a écrit :
HI, I checked again, create the disk in openfirmware dd if=Fedora-18-ppc64-netinst.iso of=/dev/disk2 bs=1m conv=sync boot ud:,\ppc\chrp\yaboot then appear boot ud:,\ppc\chrp\yaboot load-size=4077c adler32=c211ccd2 Loading ELF
$SETENV: invalid number
ok prompt
Did you try "boot ud:,\:tbxi"?
Thanks, Laurent
Thanks!! i will test... I can do dir ud:,\ the info is there, i do not know what is tbxi but i will try!
Thanks!
--- Rondan Rino Certificado en LPIC-3 http://lpi.org/v/LPI000209832/ay4xrhq48m LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA https://www.redhat.com/rhtapps/certification/verify/?certId=120-175-658
Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar http://www.rinorondan.com.ar/ http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
On Mon, Mar 5, 2018 at 11:26 AM, Laurent Vivier laurent@vivier.eu wrote:
Le 04/03/2018 à 21:36, Rino Rondan a écrit :
HI, I checked again, create the disk in openfirmware dd if=Fedora-18-ppc64-netinst.iso of=/dev/disk2 bs=1m conv=sync boot ud:,\ppc\chrp\yaboot then appear boot ud:,\ppc\chrp\yaboot load-size=4077c adler32=c211ccd2 Loading ELF
$SETENV: invalid number
ok prompt
Did you try "boot ud:,\:tbxi"?
Thanks, Laurent
Le 04/03/2018 à 13:51, Rino Rondan a écrit :
Hi,
Where I can download the ppc64 f18, I can not find in http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/
I generally use:
https://admin.fedoraproject.org/mirrormanager/
Thanks, Laurent
Le 04/03/2018 à 16:51, Laurent Vivier a écrit :
Le 04/03/2018 à 13:51, Rino Rondan a écrit :
Hi,
Where I can download the ppc64 f18, I can not find in http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/
I generally use:
and for F18:
http://archives.fedoraproject.org/pub/archive/fedora-secondary/
Thanks, Laurent
-
Laurent Vivier -
rino -
Rino Rondan -
Rino Rondan