On Fri, 10 Oct 2008 12:55:04 +0800 (CST)
xkdcc <xkdcc(a)163.com> wrote:
1. Configuration: Fedora 6 (KERNEL-2.6-18-1.2798)
2. I don't have my NIC drivers.
3. Then I have the NIC drivers source, I need compile it with kernel
source support. 4. I copy the kernel source rpm to my F6 by USB Flash
Dis. But I need to use commands below: rpm -ivh
KERNEL-2.6-18-1.2798.fc6.src.rpm rpmbuild -bp
--target=x86_64 /usr/src/redhat/SPECS/kernel-2.6.spec Building target
platforms: x86_64 Building for target x86_64
error: Failed build dependencies:
unifdef is need by kernel-2.6-18-1.2798.x86_64
5. I got information that someone suggest me to do command:
yum install unifdef
but it needs connect to network. You know, I can't now withou NIC
drivers! 6. What else can I do?
This question is off-topic for this list and is better suited to
However, now you're here:
You can get unifdef by downloading it from your network-connected
machine from here:
Transfer it to your target machine using your USB stick, then install
it using RPM:
# rpm -Uvh unifdef-1.171-5.fc6.x86_64.rpm
(this package may actually be on your install media).