Fedora 27 Update: codec2-0.8.1-1.fc27
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-ebd916384f
2018-07-01 22:21:07.913338
--------------------------------------------------------------------------------
Name : codec2
Product : Fedora 27
Version : 0.8.1
Release : 1.fc27
URL : http://rowetel.com/codec2.html
Summary : Next-Generation Digital Voice for Two-Way Radio
Description :
Codec 2 is an open source (LGPL licensed) speech codec for 2400 bit/s
and below. This is the runtime library package.
--------------------------------------------------------------------------------
Update Information:
Introduces new 700D mode.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jun 3 2018 Richard Shaw <hobbes1069(a)gmail.com> - 0.8.1-1
- Update to 0.8.1
* Tue May 29 2018 Richard Shaw <hobbes1069(a)gmail.com> - 0.8-1
- Update to 0.8.
* Wed Feb 7 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.7-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-ebd916384f' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 9 months
Fedora 27 Update: freedv-1.3.1-1.fc27
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-ebd916384f
2018-07-01 22:21:07.913338
--------------------------------------------------------------------------------
Name : freedv
Product : Fedora 27
Version : 1.3.1
Release : 1.fc27
URL : http://freedv.org
Summary : FreeDV Digital Voice
Description :
FreeDV is a GUI application for Windows and Linux that allows any SSB radio to
be used for low bit rate digital voice.
Speech is compressed down to 1400 bit/s then modulated onto a 1100 Hz wide QPSK
signal which is sent to the Mic input of a SSB radio. On receive, the signal is
received by the SSB radio, then demodulated and decoded by FreeDV.
FreeDV was built by an international team of Radio Amateurs working together on
coding, design, user interface and testing. FreeDV is open source software,
released under the GNU Public License version 2.1. The FDMDV modem and Codec 2
Speech codec used in FreeDV are also open source.
--------------------------------------------------------------------------------
Update Information:
Introduces new 700D mode.
--------------------------------------------------------------------------------
ChangeLog:
* Mon Jun 4 2018 Richard Shaw <hobbes1069(a)gmail.com> - 1.3.1-1
- Update to 1.3.1.
* Wed Feb 7 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.2.2-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-ebd916384f' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 9 months
Fedora 27 Update: schroot-1.6.10-4.fc27
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-0ced9a8ff3
2018-07-01 22:21:07.913324
--------------------------------------------------------------------------------
Name : schroot
Product : Fedora 27
Version : 1.6.10
Release : 4.fc27
URL : http://packages.debian.org/schroot
Summary : Execute commands in a chroot environment
Description :
schroot allows users to execute commands or interactive shells in
different chroots. Any number of named chroots may be created, and
access permissions given to each, including root access for normal
users, on a per-user or per-group basis. Additionally, schroot can
switch to a different user in the chroot, using PAM for
authentication and authorisation. All operations are logged for
security.
Several different types of chroot are supported, including normal
directories in the filesystem, and also block devices. Sessions,
persistent chroots created on the fly from files (tar with optional
compression and zip) and LVM snapshots are also supported.
schroot supports kernel personalities, allowing the programs run
inside the chroot to have a different personality. For example,
running 32-bit chroots on 64-bit systems, or even running binaries
from alternative operating systems such as SVR4 or Xenix.
schroot also integrates with sbuild, to allow building packages with
all supported chroot types, including session-managed chroot types
such as LVM snapshots.
schroot shares most of its options with dchroot, but offers vastly
more functionality.
--------------------------------------------------------------------------------
Update Information:
Add config(noreplace) in all files of /etc (#1585406)
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jun 14 2018 S��rgio Basto <sergio(a)serjux.com> - 1.6.10-4
- Add config(noreplace) in all files of /etc (#1585406)
* Fri May 11 2018 S��rgio Basto <sergio(a)serjux.com> - 1.6.10-3
- Make compatible with epel 7
* Wed May 9 2018 S��rgio Basto <sergio(a)serjux.com> - 1.6.10-2
- Add patch to fix STL assets with gcc 8
* Wed May 2 2018 S��rgio Basto <sergio(a)serjux.com> - 1.6.10-1
- Update to 1.6.10
- Add from Debian package, BRs, patches and config files
- Switch to cmake
- Modernize spec file
* Fri Feb 9 2018 Igor Gnatenko <ignatenkobrain(a)fedoraproject.org> - 1.6.5-23
- Escape macros in %changelog
* Tue Jan 23 2018 Jonathan Wakely <jwakely(a)redhat.com> - 1.6.5-22
- Rebuilt for Boost 1.66
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1585406 - /etc/schroot/default/* files overwritten on upgrade (not marked as %config)
https://bugzilla.redhat.com/show_bug.cgi?id=1585406
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-0ced9a8ff3' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 9 months
[SECURITY] Fedora 27 Update: nodejs-8.11.3-1.fc27
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-79841c871e
2018-07-01 22:21:07.913311
--------------------------------------------------------------------------------
Name : nodejs
Product : Fedora 27
Version : 8.11.3
Release : 1.fc27
URL : http://nodejs.org/
Summary : JavaScript runtime
Description :
Node.js is a platform built on Chrome's JavaScript runtime
for easily building fast, scalable network applications.
Node.js uses an event-driven, non-blocking I/O model that
makes it lightweight and efficient, perfect for data-intensive
real-time applications that run across distributed devices.
--------------------------------------------------------------------------------
Update Information:
Update for security fixes
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jun 14 2018 Stephen Gallagher <sgallagh(a)redhat.com> - 1:8.11.3-1
- Update to 8.11.3 for security fixes
- https://nodejs.org/en/blog/release/v8.11.3/
* Mon Jun 4 2018 Stephen Gallagher <sgallagh(a)redhat.com> - 1:8.11.2-2
- Build against OpenSSL 1.1
* Thu May 17 2018 Stephen Gallagher <sgallagh(a)redhat.com> - 1:8.11.2-1
- Update to 8.11.2
- https://nodejs.org/en/blog/release/v8.11.2/
* Fri Apr 13 2018 Rafael dos Santos <rdossant(a)redhat.com> - 1:8.11.0-2
- Use standard Fedora linker flags (bug #1543859)
* Wed Mar 28 2018 Stephen Gallagher <sgallagh(a)redhat.com> - 1:8.11.0-1
- Update to 8.11.0
- https://nodejs.org/en/blog/release/v8.11.0/
* Thu Mar 8 2018 Stephen Gallagher <sgallagh(a)redhat.com> - 1:8.10.0-1
- Update to 8.10.0
- https://nodejs.org/en/blog/release/v8.10.0/
* Thu Mar 1 2018 Stephen Gallagher <sgallagh(a)redhat.com> - 1:8.9.4-3
- Work around build issue on F28
* Thu Feb 8 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1:8.9.4-2.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
* Thu Jan 11 2018 Stephen Gallagher <sgallagh(a)redhat.com> - 1:8.9.4-2
- Fix incorrect Requires:
* Thu Jan 11 2018 Stephen Gallagher <sgallagh(a)redhat.com> - 1:8.9.4-1
- Update to 8.9.4
- https://nodejs.org/en/blog/release/v8.9.4/
- Switch to system copy of nghttp2
* Fri Dec 8 2017 Stephen Gallagher <sgallagh(a)redhat.com> - 1:8.9.3-2
- Update to 8.9.3
- https://nodejs.org/en/blog/release/v8.9.3/
- https://nodejs.org/en/blog/release/v8.9.2/
* Thu Nov 30 2017 Pete Walter <pwalter(a)fedoraproject.org> - 1:8.9.1-2
- Rebuild for ICU 60.1
* Thu Nov 9 2017 Zuzana Svetlikova <zsvetlik(a)redhat.com> - 1:8.9.1-1
- Update to 8.9.1
* Tue Oct 31 2017 Stephen Gallagher <sgallagh(a)redhat.com> - 1:8.9.0-1
- Update to 8.9.0
- Drop upstreamed patch
* Thu Oct 26 2017 Stephen Gallagher <sgallagh(a)redhat.com> - 1:8.8.1-1
- Update to 8.8.1 to fix a regression
* Wed Oct 25 2017 Zuzana Svetlikova <zsvetlik(a)redhat.com> - 1:8.8.0-1
- Security update to 8.8.0
- https://nodejs.org/en/blog/release/v8.8.0/
* Sun Oct 15 2017 Zuzana Svetlikova <zsvetlik(a)redhat.com> - 1:8.7.0-1
- Update to 8.7.0
- https://nodejs.org/en/blog/release/v8.7.0/
* Fri Oct 6 2017 Zuzana Svetlikova <zsvetlik(a)redhat.com> - 1:8.6.0-2
- Use bcond macro instead of bootstrap conditional
* Wed Sep 27 2017 Zuzana Svetlikova <zsvetlik(a)redhat.com> - 1:8.6.0-1
- Fix nghttp2 version
- Update to 8.6.0
- https://nodejs.org/en/blog/release/v8.6.0/
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1591019 - CVE-2018-7162 nodejs: denial of service (DoS) by causing a node process which provides an http server supporting TLS server to crash [fedora-all]
https://bugzilla.redhat.com/show_bug.cgi?id=1591019
[ 2 ] Bug #1591014 - CVE-2018-7161 nodejs: denial of service (DoS) by causing a node server providing an http2 server to crash [fedora-all]
https://bugzilla.redhat.com/show_bug.cgi?id=1591014
[ 3 ] Bug #1591009 - CVE-2018-7167 nodejs: Denial of Service by calling Buffer.fill() or Buffer.alloc() with specially crafted parameters [fedora-all]
https://bugzilla.redhat.com/show_bug.cgi?id=1591009
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-79841c871e' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 9 months
Fedora 27 Update: chirp-20180614-1.fc27
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-df815e427a
2018-07-01 22:21:07.913296
--------------------------------------------------------------------------------
Name : chirp
Product : Fedora 27
Version : 20180614
Release : 1.fc27
URL : http://chirp.danplanet.com/
Summary : A tool for programming two-way radio equipment
Description :
Chirp is a tool for programming two-way radio equipment It provides a generic
user interface to the programming data and process that can drive many radio
models under the hood.
--------------------------------------------------------------------------------
Update Information:
Fix for Yaesu FT-450D.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jun 14 2018 Richard Shaw <hobbes1069(a)gmail.com> - 20180614-1
- Update to 20180614.
- Add appdata file.
* Wed Jun 6 2018 Richard Shaw <hobbes1069(a)gmail.com> - 20180606-1
- Update to 20180606.
* Tue Mar 13 2018 Richard Shaw <hobbes1069(a)gmail.com> - 20180313-1
- Update to 20180313
* Sat Feb 10 2018 Richard Shaw <hobbes1069(a)gmail.com> - 20180210-1
- Update to 20180210.
* Wed Feb 7 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 20171204-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
* Fri Dec 15 2017 Iryna Shcherbina <ishcherb(a)redhat.com> - 20171204-2
- Update Python 2 dependency declarations to new packaging standards
(See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)
* Wed Dec 6 2017 Richard Shaw <hobbes1069(a)gmail.com> - 20171204-1
- Update to latest upstream release.
- Fix ambiguous Python 2 dependency declarations
https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3
* Fri Nov 17 2017 Richard Shaw <hobbes1069(a)gmail.com> - 20171104-1
- Update to latest upstream release.
* Fri Sep 22 2017 Richard Shaw <hobbes1069(a)gmail.com> - 20170714-1
- Update to latest upstream release.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1562439 - AppStream metadata for CHIRP package are missing
https://bugzilla.redhat.com/show_bug.cgi?id=1562439
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-df815e427a' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 9 months
Fedora 27 Update: fldigi-4.0.17-1.fc27
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-b18fbed9dc
2018-07-01 22:21:07.913256
--------------------------------------------------------------------------------
Name : fldigi
Product : Fedora 27
Version : 4.0.17
Release : 1.fc27
URL : http://www.w1hkj.com/Fldigi.html
Summary : Digital modem program for Linux
Description :
Fldigi is a modem program which supports most of the digital modes used by
ham radio operators today. You can also use the program for calibrating your
sound card to WWV or doing a frequency measurement test. The program also comes
with a CW decoder. fldigi is written with the help of the Fast Light Toolkit X
GUI. Fldigi is a fast moving project many added features with each update.
Flarq (Fast Light Automatic Repeat Request) is a file transfer application
that is based on the ARQ specification developed by Paul Schmidt, K9PS.
It is capable of transmitting and receiving frames of ARQ data via fldigi.
--------------------------------------------------------------------------------
Update Information:
# Version 4.0.17 - Update release: flarq idtimer * Add 10 minute id
timer to statFrame Greek language update * updated el.po submitted by
Haris, SV1GRB Documentation Update * Add nanoCW, nanoFSK, Navigator
interface. * Update macro matrix display (48 macros in 4 rows) xmlrpc cat
string * add send cat string to flrig - similar to <RIGCAT macro
tmpfile * tmpfile() is apparently not thread safe on OS X remove
usage from SoundBase::format_supported(...) Serial port discovery * Add
/dev/rfcomm? blue tooth serial device names to serial device list Log
entries * Change mode entry for Olivia, MT63, Thor, Throb to include
submode. - allows correct setting of mode / submode when
retrieving a logbook entry. rx/tx * correct action of tx over rx toggle
RTTY Quick pick * disable RTTY quick pick if using nanoIO or Navigator
flarq appdir * change test for FL_APPS folder WinKey PTT * Enable
winkey PTT CW/FSK I/O on start * restore last connect state of Nav /
tinyCW / tinyFSK when starting program Default Lighted Button *
Allow user to specify the default ON color for all lighted buttons not
specifically configured. ST/PR macro tags * Add macro tags for State and
Province Logbook read * Make Rx panel announcement of read user optional
Navigator * Add Navigator terminal unit support for FSK - options
setting panel nanoIO * nanoIO is the interface code for the device
nanoIO, an Arduino project that provide hard line keying of CW and FSK
* nanoFSK - Add interface and support code for nanoIO / tinyFSK Arduino
FSK keyers - Modify waterfall frequency display for transceiver FSK
- Modify dxcluster qsy operations to provide correct QSY for transceiver
FSK - Add TTY transceiver mode recognition if transceiver mode
string contains RTTY or FSK *nanoCW - Add CW support using nanoIO
- CW WPM 5 to 100 - CW dash/dot ratio: 2.5 to 3.5 quick pick rtty baud
* add 100 Baud K2/K3/KX3 data modes * Add DATA / DATA-R as FSK type
submodes if either tinyFSK, Navigator or Right-Channel FSK signaling
interface is enabled. Modem start frequency * Change initialization of
modem start up frequency - prevent unintended start @ 1000 Hz for every
change in mode * Modem startup will honor the sweet spot frequency
unless it is incompatible with the modem requirement fsq/ifkp audit logs
* Enable audit log open/close from configuration panel * Correct date-time
stamp in logs RTTY browser decode * fix browser decoder sense when
transceiver is in LSB type mode, i.e. FSK, LSB, LSB-D etc. 8pskF *
Fixed bug in 8psk 125F/250F init code - Bad constraint length was causing
decoder to fail * New preamble for 8PSK FEC modes - FEC modes preamble
is now a continuous tone at center-frequency - Gives reference for
clicking & selecting signal on waterfall. - Is backwards compatible with
previous-version 8psk preambles * Adjusted 8PSK-F modes flush/postamble
length much longer - Can visually see the inlv flush and postamble "tail"
on waterfall - New flush/postamble extends beyond data, to prevent cutoff
* Code, formatting, and comments cleaned-up for 8PSK code
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jun 7 2018 Richard Shaw <hobbes1069(a)gmail.com> - 4.0.17-1
- Update to 4.0.17.
* Fri Feb 9 2018 Richard Shaw <hobbes1069(a)gmail.com> - 4.0.16-1
- Update to 4.0.16.
* Wed Feb 7 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.0.14-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
* Tue Jan 16 2018 Richard Shaw <hobbes1069(a)gmail.com> - 4.0.14-1
- Update to latest upstream release.
* Sun Dec 31 2017 Richard Shaw <hobbes1069(a)gmail.com> - 4.0.13-1
- Update to latest upstream release.
* Sat Oct 28 2017 Richard Shaw <hobbes1069(a)gmail.com> - 4.0.12-1
- Update to latest upstream release.
* Sun Oct 22 2017 Richard Shaw <hobbes1069(a)gmail.com> - 4.0.11-1
- Update to latest upstream release.
* Tue Sep 26 2017 Richard Shaw <hobbes1069(a)gmail.com> - 4.0.10-1
- Update to latest upstream release.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1590587 - fldigi-4.0.17 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1590587
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-b18fbed9dc' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 9 months
Fedora 28 Update: shared-mime-info-1.10-1.fc28
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-77e845c798
2018-07-01 02:36:41.994122
--------------------------------------------------------------------------------
Name : shared-mime-info
Product : Fedora 28
Version : 1.10
Release : 1.fc28
URL : http://freedesktop.org/Software/shared-mime-info
Summary : Shared MIME information database
Description :
This is the freedesktop.org shared MIME info database.
Many programs and desktops use the MIME system to represent the types of
files. Frequently, it is necessary to work out the correct MIME type for
a file. This is generally done by examining the file's name or contents,
and looking up the correct MIME type in a database.
--------------------------------------------------------------------------------
Update Information:
This update adds a number of new mime-types.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jun 28 2018 Bastien Nocera <bnocera(a)redhat.com> - 1.10-1
+ shared-mime-info-1.10-1
- Update to 1.10
* Wed Mar 7 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 1.9-4
- BR: gcc, .spec cosmetics/cleanup
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-77e845c798' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 10 months
Fedora 28 Update: squid-4.0.25-1.fc28
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-4eff0fab2b
2018-07-01 02:36:41.994085
--------------------------------------------------------------------------------
Name : squid
Product : Fedora 28
Version : 4.0.25
Release : 1.fc28
URL : http://www.squid-cache.org
Summary : The Squid proxy caching server
Description :
Squid is a high-performance proxy caching server for Web clients,
supporting FTP, gopher, and HTTP data objects. Unlike traditional
caching software, Squid handles all requests in a single,
non-blocking, I/O-driven process. Squid keeps meta data and especially
hot objects cached in RAM, caches DNS lookups, supports non-blocking
DNS lookups, and implements negative caching of failed requests.
Squid consists of a main server program squid, a Domain Name System
lookup program (dnsserver), a program for retrieving FTP data
(ftpget), and some management and client tools.
--------------------------------------------------------------------------------
Update Information:
squid update
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jun 28 2018 Lubo�� Uhliarik <luhliari(a)redhat.com> - 7:4.0.25-1
- new version 4.0.25
* Mon Jun 4 2018 Lubo�� Uhliarik <luhliari(a)redhat.com> - 7:4.0.24-2
- removed obsolete BuildRequires (libdb4-devel)
* Thu Mar 8 2018 Lubo�� Uhliarik <luhliari(a)redhat.com> - 7:4.0.24-1
- new version 4.0.24
- disabled strict checking (removed -Werror)
* Fri Feb 9 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 7:4.0.23-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1467072 - squid-4.0.21 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1467072
[ 2 ] Bug #1556460 - squid: FTBFS in F28
https://bugzilla.redhat.com/show_bug.cgi?id=1556460
[ 3 ] Bug #1590048 - squid-4.0.25 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1590048
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-4eff0fab2b' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 10 months
Fedora 28 Update: vim-8.1.119-1.fc28
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-f29ca9ccd4
2018-07-01 02:36:41.994050
--------------------------------------------------------------------------------
Name : vim
Product : Fedora 28
Version : 8.1.119
Release : 1.fc28
URL : http://www.vim.org/
Summary : The VIM editor
Description :
VIM (VIsual editor iMproved) is an updated and improved version of the
vi editor. Vi was the first real screen-based editor for UNIX, and is
still very popular. VIM improves on vi by adding new features:
multiple windows, multi-level undo, block highlighting and more.
--------------------------------------------------------------------------------
Update Information:
The newest upstream commit ---- The newest upstream commit
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jun 28 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.119-1
- patchlevel 119
* Thu Jun 28 2018 Jitka Plesnikova <jplesnik(a)redhat.com> - 2:8.1.117-2
- Perl 5.28 rebuild
* Wed Jun 27 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.117-1
- patchlevel 117
* Mon Jun 25 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.115-1
- patchlevel 115
* Fri Jun 22 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.095-1
- patchlevel 095
* Tue Jun 19 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 2:8.1.072-2
- Rebuilt for Python 3.7
* Mon Jun 18 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.072-1
- patchlevel 072
* Fri Jun 15 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.055-1
- patchlevel 055
* Mon Jun 11 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.042-1
- patchlevel 042
* Fri Jun 8 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.039-1
- patchlevel 039
* Wed Jun 6 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.035-1
- patchlevel 035
* Tue Jun 5 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.034-1
- patchlevel 034
* Mon May 28 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.026-1
- patchlevel 026
* Thu May 24 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.022-1
- patchlevel 022
* Wed May 23 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.020-1
- patchlevel 020
* Tue May 22 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.016-1
- patchlevel 016
* Mon May 21 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.010-1
- patchlevel 010
* Fri May 18 2018 Karsten Hopp <karsten(a)redhat.com> 8.1.001-1
- patchlevel 001
* Fri May 18 2018 Zdenek Dohnal <zdohnal(a)redhat.com> - 8.0.1848-2
- vim-update.sh - update vimdir and baseversion(for major rebases)
- vim-update.sh - enhance debugging of vim-update script
* Thu May 17 2018 Karsten Hopp <karsten(a)redhat.com> 8.0.1848-1
- patchlevel 1848
* Tue May 15 2018 Zdenek Dohnal <zdohnal(a)redhat.com> - 8.0.1842-2
- do not update F26 anymore - EOL in 2 weeks
* Tue May 15 2018 Karsten Hopp <karsten(a)redhat.com> 8.0.1842-1
- patchlevel 1842
* Tue May 15 2018 Zdenek Dohnal <zdohnal(a)redhat.com> - 8.0.1813-2
- use environment variable in build phase
* Fri May 11 2018 Karsten Hopp <karsten(a)redhat.com> 8.0.1813-1
- patchlevel 1813
* Fri May 11 2018 Zdenek Dohnal <zdohnal(a)redhat.com> - 8.0.1806-2
- use python2 and python3 in code
* Thu May 10 2018 Karsten Hopp <karsten(a)redhat.com> 8.0.1806-1
- patchlevel 1806
* Wed May 9 2018 Zdenek Dohnal <zdohnal(a)redhat.com> - 8.0.1789-2
- 1575354 - suggest more packages for embedded interpreters
* Fri May 4 2018 Karsten Hopp <karsten(a)redhat.com> 8.0.1789-1
- patchlevel 1789
* Thu May 3 2018 Karsten Hopp <karsten(a)redhat.com> 8.0.1788-1
- patchlevel 1788
* Wed May 2 2018 Karsten Hopp <karsten(a)redhat.com> 8.0.1787-1
- patchlevel 1787
* Fri Apr 27 2018 Karsten Hopp <karsten(a)redhat.com> 8.0.1766-1
- patchlevel 1766
* Thu Apr 26 2018 Karsten Hopp <karsten(a)redhat.com> 8.0.1765-1
- patchlevel 1765
* Wed Apr 25 2018 Karsten Hopp <karsten(a)redhat.com> 8.0.1763-1
- patchlevel 1763
* Tue Apr 24 2018 Karsten Hopp <karsten(a)redhat.com> 8.0.1755-1
- patchlevel 1755
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-f29ca9ccd4' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 10 months
[SECURITY] Fedora 28 Update: bind-9.11.3-12.fc28
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-bfec61fb2f
2018-07-01 02:36:41.994021
--------------------------------------------------------------------------------
Name : bind
Product : Fedora 28
Version : 9.11.3
Release : 12.fc28
URL : http://www.isc.org/products/BIND/
Summary : The Berkeley Internet Name Domain (BIND) DNS (Domain Name System) server
Description :
BIND (Berkeley Internet Name Domain) is an implementation of the DNS
(Domain Name System) protocols. BIND includes a DNS server (named),
which resolves host names to IP addresses; a resolver library
(routines for applications to use when interfacing with DNS); and
tools for verifying that the DNS server is operating properly.
--------------------------------------------------------------------------------
Update Information:
- Fix CVE-2018-5738 - Remove named.iscdlv.key
--------------------------------------------------------------------------------
ChangeLog:
* Wed Jun 27 2018 Petr Men����k <pemensik(a)redhat.com> - 32:9.11.3-12
- Require utils instead of library
* Wed Jun 27 2018 Petr Men����k <pemensik(a)redhat.com> - 32:9.11.3-11
- Remove named.iscdlv.key file (#1595782)
- Fix CVE-2018-5738
* Tue Jun 19 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 32:9.11.3-10
- Rebuilt for Python 3.7
* Fri May 25 2018 Petr Men����k <pemensik(a)redhat.com> - 32:9.11.3-9
- Make named home writeable (#1422680)
- Change named shell to /bin/false
* Fri May 25 2018 Petr Men����k <pemensik(a)redhat.com> - 32:9.11.3-8
- Require C++ on build when shipped atf library is used
* Mon Apr 9 2018 Petr Men����k <pemensik(a)redhat.com> - 32:9.11.3-7
- Run tests also without kyua
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1589616 - CVE-2018-5738 bind: Improper handling of configuration allows all clients to perform recursive queries
https://bugzilla.redhat.com/show_bug.cgi?id=1589616
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-bfec61fb2f' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 10 months