Hi Jim,
that is everything I want to know. Thank you!
2011/3/7 Jim Hart <openapc(a)gmail.com>
Simon,
the Serial Interface plug-in contains a generic implementation and of
course is not able to understand all possible protocols and data
formats. This plug-in expects/supports the following modes:
- Command/Value - here data sets consisting of a command string and an
additional value are expected in both directions, when receiving them
a data set has to be terminated by a CR/LF and the data fields itself
are identified by a preceding string "CHAR", "NUM", "DIGI",
"BIN" or
"CMD"
- Plain - same as before but without a command value, everything is
transmitted/expected with a preceding identifier and terminated by a
CR/LF
- Raw - everything is treated as text but also terminated by a CR/LF
When the data you are try to receive differ from this format the
plug-in will not be able to mange them, simply because it does not
know your format. So you would have to modify the plug-in according to
your protocol.
On 06/03/2011, Simon Bauer <simon.bauer10(a)googlemail.com> wrote:
> Hi Jim,
>
> i'm trying to recieve from my arduino a simple integer value like 10. I
can
> see that openapc is opening the interface but nothing more. Thanks.
>
> Simon
>
> 2011/3/6 Jim Hart <openapc(a)gmail.com>
>
>> Hi,
>>
>> I'm not sure what you want to know exactly but creating a serial
>> connection is quite simple:
>>
>> - go to Flow Editor
>> - right click and add an element Input/Output -> Serial Interface
>> - double click the symbol and enter the data of your serial interface
>> (port, data rate, data format,...)
>>
>> And that's it, now you can use the inputs and outputs of that flow
>> element to send/receive data.
>>
>> On 05/03/2011, Simon Bauer <simon.bauer10(a)googlemail.com> wrote:
>> > Hi there,
>> >
>> > can somenbody give me some examples how to set up a serial interface.
>> Maybe
>> > later on also with modbus rtu. Thanks very much.
>> >
>> > Greetings,
>> > Simon
>> >
>>
>>
>> --
>> Kind regards
>>
>> Jim Hart
>>
>>
>>
http://www.openapc.com
>> _______________________________________________
>> openapc mailing list
>> openapc(a)lists.fedorahosted.org
>>
https://fedorahosted.org/mailman/listinfo/openapc
>>
>
>
>
> --
> ***************************************************
> Dipl.-Ing.(FH) Simon Bauer
>
> Panholz 13
> 94538 Fürstenstein
> Tel.: 08544/43800050
> Mobil.: 0151/23061832
> simon.bauer10(a)googlemail.com
> ***************************************************
>
--
Kind regards
Jim Hart
http://www.openapc.com
_______________________________________________
openapc mailing list
openapc(a)lists.fedorahosted.org
https://fedorahosted.org/mailman/listinfo/openapc
--
***************************************************
Dipl.-Ing.(FH) Simon Bauer
Panholz 13
94538 Fürstenstein
Tel.: 08544/43800050
Mobil.: 0151/23061832
simon.bauer10(a)googlemail.com
***************************************************