Jacob,
are we talking about Windows or Linux?
For Windows: you have to copy the RTC-DLL to Windows/System32 and need
to configure the path to correction file and .hex firmware file within
scanner card settings.
For Linux it is similar: the RTC-library needs to be copied to
/usr/lib and correction and firmware file have to be configured.
In both cases please ensure to use the .hex file that fits to your
hardware (e.g. the 3D-hex-file will not work on cards that do not have
3D option).
Kind regards
Jim
On 31/07/2012, Banasek, Jacob Thomas <banasek.2(a)wright.edu> wrote:
Thanks for the respones. I gave it a try but was not able to have
any luck.
To give you some more details I am trying to run this system with a
continues wave YAG laser. I have the correction file set to the one you
just gave me and the firmware pointing to the RTC3D2.hex file in RTC files
folder form the drives download from the Scanlab site. I also have updated
the firmware to make sure it is up to date. The error I get almost right
after hiting the mark button is
"ScanLAB(R) RTC:
Could not allocate required resources!"
Thanks again for the help
Jacob
________________________________________
From: openapc-bounces(a)lists.fedorahosted.org
[openapc-bounces(a)lists.fedorahosted.org] on behalf of Miguel
[miguel67(a)gmx.de]
Sent: Tuesday, July 31, 2012 3:41 PM
To: openapc(a)lists.fedorahosted.org
Subject: Re: RTC setup question
I forgot: here are one correction file who works
Miguel Abril
From: Banasek, Jacob Thomas<mailto:banasek.2@wright.edu>
Sent: Tuesday, July 31, 2012 8:05 PM
To: openapc@lists.fedorahosted.org<mailto:openapc@lists.fedorahosted.org>
Subject: RTC setup question
I just found this software and trying to connect on the BeamConstruct
software to an RTC 3 card. I think I have it set up to the correct files
(and have tried many different things), but am continually getting "cannot
allocate required resources" as an error whenever I try to run a pattern. I
think it is connection to the software problem as this card does work with a
different program that was being used). I was wondering if anyone had any
tips, tricks, or suggestion on how to get this to work.
thanks for your time and help
jacob
________________________________
_______________________________________________
openapc mailing list
openapc(a)lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/openapc
_______________________________________________
openapc mailing list
openapc(a)lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/openapc