Hello again!
I am considering all the votes to list shared with you recently as no one proposed new words. Please, send your votes to the mailing list, you have until Friday 8.00 AM UTC :-)
P.S: I am considering the votes already sent, so there is no need to send them again.
Thanks, Fernando.
On Tue, Sep 1, 2020 at 4:28 PM Beniamino Galvani bgalvani@redhat.com wrote:
On Mon, Aug 31, 2020 at 12:32:33PM +0200, Fernando Fernandez Mancera wrote:
Hello everyone,
I am asking for ideas and tomorrow I will open a public voting on the mailing list. So, please add your suggestions now. The current ones are:
- main/sub
- main/member
- parent/child
- base/child
- main/worker
- trunk/leg
- base/leg
Please, feel free to add other terms.
In NetworkManager the parent/child terminology is used for interfaces like VLANs, IP tunnels, PPPoE where an interface is stacked upon another without relation to other 'siblings'.
- base/child
- main/worker
- trunk/leg
- base/leg
Please, feel free to add other terms.
I like (in this order) {'base', 'main'} for the master and {'port', 'member'} for slaves.
Beniamino
On Thu, Aug 27, 2020 at 2:31 PM William Caban Babilonia william.caban@redhat.com wrote:
Another idea for the naming.
If we consider something like:
bond0:
- eth0
- eth1
- eth2
- eth3
bond0.vlan1 bond0.vlan2
etc,
- What about calling the physical interfaces "eth0-3" "members" of bond0?
- What about calling "vlan1" "vlan2" are a child of bond0?
_W
On Thu, Aug 27, 2020 at 6:33 AM Till Maas till@redhat.com wrote:
Hi,
Am Do., 27. Aug. 2020 um 11:49 Uhr schrieb Fernando Fernandez Mancera ferferna@redhat.com:
Looking on the thread it seems we agree on two points:
- We should use a generic word for codebase and for API VLAN/VXLAN
will user base/parent, as we are already doing.
- Short words are good so controller/subordinate is too long and
interface/subinterface are too generic.
my proposal should have been top and sub as the identifiers but I it would be spoken as top interface / sub interface.
IMO, we should follow the kernel terms and we shouldn't create new terms because it would be hard to understand for maintainers. https://www.zdnet.com/article/linux-team-approves-new-terminology-bans-terms...
I propose to use:
"base/worker" or "main/worker".
This would also lead to base interface and worker interface.
base and worker are not mentioned in the zdnet article. So how about "main" and "sub" (short for subordinate).
Can we maybe check at least with someone else involved in the upstream kernel to get their opinion if Jarod is not available?
Thanks Till
If there is no complaint on this I will work on this by next week, so please, share your thoughts. :-)
Thanks! Fernando.
On Mon, Aug 24, 2020 at 11:01 AM Fernando Fernandez Mancera ferferna@redhat.com wrote:
Sorry, I meant "base/leg".
On Mon, Aug 24, 2020 at 10:59 AM Fernando Fernandez Mancera ferferna@redhat.com wrote: > > On Mon, Aug 24, 2020 at 10:35 AM Till Maas till@redhat.com wrote: > > > > Hi, > > > > Am Mo., 24. Aug. 2020 um 10:14 Uhr schrieb Fernando Fernandez Mancera > > ferferna@redhat.com: > > > > > > On Mon, Aug 24, 2020 at 9:58 AM Till Maas till@redhat.com wrote: > > > > > > > > Hi, > > > > > > > > Am Do., 13. Aug. 2020 um 17:06 Uhr schrieb Gris Ge fge@redhat.com: > > > > > > > > > > Hi, > > > > > > > > > > I would like to suggest we deprecate our use of `master/slave` in > > > > > nmstate project. > > > > > > > > > > And switching to these terminologies for interface relationship in > > > > > the coming new release of nmstate-0.4.0: > > > > > > > > > > * For bond/team/bridge: > > > > > * controller/subordinate > > > > > # For bridge, we can also use controller/port. > > > > > > > > having shorter words would be nice, maybe > > > > > > > > trunk/leg > > > > base/leg > > > > > > > > base/dell > > > > mesa/dell > > > > base/vale > > > > > > > > bulk/part > > > > > > > > > > > > > > * For VLAN/VxLAN: > > > > > * parent/child > > > > > * base/child > > > > > # Current API using `base-iface`, no need to change > > > > > > > > Some other suggestions: > > > > base/apex > > > > mesa/apex > > > > > > > > base/head > > > > trunk/head > > > > > > Those are a little bit confusing for me. I expect both "base" and > > > "head" would replace "master". > > > > Interesting. This might be because I did not think about the old > > analogy where one interface has power over the other but more like how > > they are arranged. > > > > Bond interfaces are built on top of other interfaces, making the other > > interfaces something at the bottom (like legs) and the bond interface > > the trunk or base. Since VLAN interfaces are also built on top of > > other interfaces, even on bond interfaces, this makes them another top > > layer which is the head. But since there could be multiple VLAns, arms > > might make more sense and then both arms and legs are limbs. > > > > > I've been thinking on this and it would be good to use only one option > > > for codebase, i.e using the same terms for all kind of interfaces. For > > > the exposed API, I would not change VLAN/VXLAN as we are already using > > > base/child terms. For other interfaces I noticed that we are mixing up > > > "slaves" and "ports", I suggest to unify it into a generic one. IMO, > > > the most generic are "controller/subordinate". > > > > > > If we agree on the generic word, I would use them for the whole codebase. > > > > > > What do you think? Thanks! > > > > I am not sure if the power structure is the best analogy, here. Does a > > bond/bridge interface really control its subordinate interfaces? Maybe > > it also does not matter that much, given that at some point the words > > will be defined by usage. However, using long words might not stick > > since people are lazy. A shorter alternative might be top > > interface/sub interface. > > > > Yes, that is true. It would be nice to use a shorter word.. maybe > "parent/child"? As parents have power over their childs.. Not sure. > About interface/subinterface, I find them very lazy, "interface" term > is all over the codebase so it could be very confusing for us, IMO. > > I also like "base/lag"- > > Thanks! > > > Thanks > > Till > > > > > > > > > > > > > > > > > > > The trunk interface of eth1 is bond0 > > > > eth1 is a leg of the bridge br0 > > > > eth1 is a leg of an base interface > > > > eth1 is a dell interface of br0 (probably not so nice because of the > > > > confusion with the manufacturer) > > > > eth1 is a vale interface of br0 > > > > eth1 is a limb of br0 > > > > eth1 is a leg of br0 > > > > br0 is the trunk for eth1 > > > > > > > > > > > > eth1 is a part interface of the br0 bulk interface > > > > > > > > > > > > the base of VLAN eth1.100 is eth1 > > > > eth1.100 is an apex interface of eth1 > > > > eth1.100 is a head of eth1 > > > > eth1 is the trunk interface for eth1.100. > > > > eth1 is the base interface for eth1.100. > > > > eth1 is the trunk for eth1.100 > > > > eth1.100 is a limb of eth1 > > > > eth1.100 is an arm of eth1 > > > > > > > > > > > > These seem to be my current favorites: > > > > leg/trunk/head > > > > limb/trunk/limb > > > > > > > > Limb could be used both for the interfaces included in a bridge or a > > > > bond. Not sure, if they need to have different identifiers. > > > > > > > > > > > > > > > > > > For example: > > > > > * The `controller` of eth1 is bond0 and `controller_type` is bond > > > > > * The br0 is `controller` of eth1 > > > > > * The eth1 is `port` of bridge br0 or `subordinate` of bridge br0 > > > > > * The eth1 is `subordinate` of bond0 > > > > > * The VLAN eth1.100 is child of eth1 > > > > > * The base interface of eth1.100 is eth1 > > > > > * The parent of VLAN eth1.100 is eth1 > > > > > * The VLAN eth1.100 is child of eth1 > > > > > > > > > > I am not English native speaker, please kindly help on this if you have > > > > > better ideas. > > > > > > > > > > Thank you very much! > > > > > > > > Thank you for moving this forward! > > > > > > > > Till