Re: [libteam]teamd_init() failed - libteam - Fedora mailing-lists

1 Jun 2012


      On Fri, 1 Jun 2012 09:43:32 +0800
Wenhua Zhang shiziwen@gmail.com wrote:
...
Hi Flavio,
What do you mean "I had to clean the 'configure' caches from libnl and
libteam as well
in order to get updated binaries."?
Can you give me some more information ?
yeah, if you modify the environment (adding team driver support in
kernel, for instance) and just run make, the previously cached data
will be used and the tool will report the same error.
You have to run 'make clean' or start with a fresh './autogen.sh'
to update everything.
fbl
...
Thanks,
Best Wishes,
Wenhua
2012/6/1 Wenhua Zhang shiziwen@gmail.com:
...
Hi Flavio,
Can you show me your config file and the environment you use?
I am confused about how to test the libteam, and I hope you can give
me some advice.
We plain to use libteam instead of bonding, and before that we need do
some tests.
Thanks,
Best Wishes.
2012/6/1 Flavio Leitner fbl@redhat.com:
...
On Thu, 31 May 2012 23:23:42 +0800
Wenhua Zhang shiziwen@gmail.com wrote:
...
Hi Flavio,
Thanks for your help.
I have build the latest net-next kernel and try again.
There is still some problem, and I will try some other method to fix it.
I did those steps yesterday using net-next and I am now running
active-backup on two different machines.
I had to clean the 'configure' caches from libnl and libteam as well
in order to get updated binaries.
fbl
...
2012/5/31 Flavio Leitner fbl@redhat.com:
...
On Thu, 31 May 2012 11:36:43 +0800
Wenhua Zhang shiziwen@gmail.com wrote:
...
Hi all,
When I try to test the libteam as Example in
https://fedorahosted.org/libteam/wiki/InfrastructureSpecification, I
got errors as blew:
Failed to create team device.
teamd_init() failed.
Failed to start daemon: Operation not supported
The command is :teamd -f teamd2.conf  -D
The conf is :
{
        "device": "team0",
        "runner": {
                "name": "lacp",
                "active": 1,
                "fast_rate": 1
        },
        "link_watch": {"name": "ethtool"},
        "ports": {"eth1": {}, "eth2": {}}
}
So, is there something wrong with my commands or conf file?
Thanks for your help.
You didn't tell what kernel you are using. You need to have
a kernel with libteam driver enabled.
After booting with that kernel, compile libnl, install it.
Next compile libteam and install it.
That fixed the same issue here.
fbl