Hi,
Yes, you need kmod-nvidia and akmod-nvidia (or kmod-nvidia-PAE and
akmod-nvidia-PAE if you use a PAE kernel) as these meta-packages install the
proper driver. The problem here is that nvidia-settings doesn't depends on
the nvidia driver, but the driver package does requires nvidia-settings.
That's why you didn't have the nvidia module loaded.
By the way, I can't find nvidia-conf throught yum, so I assume you have
installed these packages from other sources. It would be a good idea to
remove them and install using yum from rpmfusion:
http://rpmfusion.org/Configuration/
And also follow their installation guide:
http://rpmfusion.org/Howto/nVidia#head-b52d8a785c3188f03b893e4f8c75f8d7e3...
Regards.
2010/10/25 Muhammad Uzair Khan <m.uzairkhan(a)gmail.com>
hi,
thanks for your help. i had simply installed, the nvidia-setting and
nvidia-conf programs which i ran. I checked using
rpm -qa | grep kmod
and the only thing that turns up are the kmod-wl .
Also the output from the command you gave throws up a couple of warnings.
But mainly has the following errors:
(WW) warning, could'nt open module nvidia
(EE) Failed to load module "nvidia" (module does not exist, 0)
(EE) No drivers available
Also,
During the boot process it does not really through up any errors. Simply
brings up an initial screen (blue backgroud) and then just sits there doing
nothing. I changed to console and all i can are various services being
started without any problem.
The last service to be started is
Starting crond: [ok]
Starting atd: [ok]
Before this there is a warning,
udevd[504] SYSFS{}= will be removed in a future udev version, please use
ATTR{}= to match the event devide or ATTRS{}= to match a parent device ,
in/etc/udev/rules.d/50-euvccam.rules:6
Should i try installing, kmod-nvidia ?
regards
khan
On 10/25/10 4:18 PM, Miguel Ángel Pérez wrote:
Hello,
You'll have to give some more information. First how you installed nvidia
drivers and second what errors is throwing xorg in startup to not being able
to boot. You can use the next command in console and post/attach the output:
cat /var/log/Xorg.0.log | egrep "[E|W]{2}"
You can store it to a file this way (the last part is the path to the
file):
cat /var/log/Xorg.0.log | egrep "[E|W]{2} > /tmp/xorg_errors.txt
Also you might found aditional configuration steps here:
http://forums.fedoraforum.org/showthread.php?t=204752
http://rpmfusion.org/Howto/nVidia#head-b52d8a785c3188f03b893e4f8c75f8d7e3...
Regards.
2010/10/25 Muhammad Uzair Khan <m.uzairkhan(a)gmail.com>
> hi again.
> I posted a day or two ago about my problems with trying to boot Fedora
> core 13 on a Dell vostro 3500. With help from this mailing list i
> managed to get the system installed.
>
> I tried to set my laptop to use a external monitor as well (dell), and
> had a very fuzzy output on the second (external) monitor. I installed
> nvidia-settings which asked me to install nvidia-config. Once i ran the
> nvidia.config everything went downhill from there. Now i cannot even
> boot my system (well i can get it to boot in single mode but thats about
> it).
> I have tried running Xorg -configure to generate a new xconfig.con file
> but nothing seems to be working. My laptop still gets stuck while
> booting, unless i use single mode. I am kinda sure that its a problem
> with the nvidia drivers but have no idea on what to do next.
>
> I am most grateful for any suggestions.
> regards
> khan
>
> _______________________________________________
> laptop mailing list
> laptop(a)lists.fedoraproject.org
>
https://admin.fedoraproject.org/mailman/listinfo/laptop
>
--
Saludos,
Miguel Ángel Pérez
--
Saludos,
Miguel Ángel Pérez