I have a very weird problem.
Compaq Presario F500. Only about a year old.
Recently (past few weeks), whenever I boot up, the following keys are non responsive; asdfjkl; and the enter key.
If I wait a few minutes, like 3 or 4 minutes, they start working. If I restart a couple of times, they start working too, however, I think this is the same 3-4 minute delay.
It would appear to be a hardware problem (bad keyboard), however, once the keys start working, I never have another problem, until the next reboot.
Could there be some software issue here?
I really like the laptop, works well, I really don't want to take it apart unless I have to.
Jim
Hi Jim.
You can search into system logs and look for keyboard-related messages, that will provide some hints of errors that could be happening.
You can try from console: dmesg | less cat /var/log/messages | less
Or from gui you can use the system logs viewer in Applications -> System Tools -> System log
2008/12/13 Jim Duda jim@duda.tzo.com
I have a very weird problem.
Compaq Presario F500. Only about a year old.
Recently (past few weeks), whenever I boot up, the following keys are non responsive; asdfjkl; and the enter key.
If I wait a few minutes, like 3 or 4 minutes, they start working. If I restart a couple of times, they start working too, however, I think this is the same 3-4 minute delay.
It would appear to be a hardware problem (bad keyboard), however, once the keys start working, I never have another problem, until the next reboot.
Could there be some software issue here?
I really like the laptop, works well, I really don't want to take it apart unless I have to.
Jim
Fedora-laptop-list mailing list Fedora-laptop-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-laptop-list
Miguel Angel Perez wrote:
Hi Jim.
You can search into system logs and look for keyboard-related messages, that will provide some hints of errors that could be happening.
You can try from console: dmesg | less cat /var/log/messages | less
Thanks for the reply Miguel, and good idea. I searched through the logs, however, no obvious errors or warnings found.
Jim
Or from gui you can use the system logs viewer in Applications -> System Tools -> System log
2008/12/13 Jim Duda <jim@duda.tzo.com mailto:jim@duda.tzo.com>
I have a very weird problem. Compaq Presario F500. Only about a year old. Recently (past few weeks), whenever I boot up, the following keys are non responsive; asdfjkl; and the enter key. If I wait a few minutes, like 3 or 4 minutes, they start working. If I restart a couple of times, they start working too, however, I think this is the same 3-4 minute delay. It would appear to be a hardware problem (bad keyboard), however, once the keys start working, I never have another problem, until the next reboot. Could there be some software issue here? I really like the laptop, works well, I really don't want to take it apart unless I have to. Jim _______________________________________________ Fedora-laptop-list mailing list Fedora-laptop-list@redhat.com <mailto:Fedora-laptop-list@redhat.com> http://www.redhat.com/mailman/listinfo/fedora-laptop-list--
Miguel Ángel Pérez
Fedora-laptop-list mailing list Fedora-laptop-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-laptop-list
You can also attach them in your next reply so people in this list can also take a look at it.
I've googled a bit and in the past your laptop model have been not working properly for a lot of people, especially ubuntu users. Maybe there is still some issues to polish related to keyboard mapping, acpi support or whatever, so finding and reporting would be great.
2008/12/14 Jim Duda jim@duda.tzo.com
Miguel Angel Perez wrote:
Hi Jim.
You can search into system logs and look for keyboard-related messages, that will provide some hints of errors that could be happening.
You can try from console: dmesg | less cat /var/log/messages | less
Thanks for the reply Miguel, and good idea. I searched through the logs, however, no obvious errors or warnings found.
Jim
Or from gui you can use the system logs viewer in Applications -> System Tools -> System log
2008/12/13 Jim Duda <jim@duda.tzo.com mailto:jim@duda.tzo.com>
I have a very weird problem. Compaq Presario F500. Only about a year old. Recently (past few weeks), whenever I boot up, the following keys are non responsive; asdfjkl; and the enter key. If I wait a few minutes, like 3 or 4 minutes, they start working. If I restart a couple of times, they start working too, however, I think this is the same 3-4 minute delay. It would appear to be a hardware problem (bad keyboard), however, once the keys start working, I never have another problem, until the next reboot. Could there be some software issue here? I really like the laptop, works well, I really don't want to take it apart unless I have to. Jim _______________________________________________ Fedora-laptop-list mailing list Fedora-laptop-list@redhat.com <mailto:Fedora-laptop-list@redhat.com> http://www.redhat.com/mailman/listinfo/fedora-laptop-list--
Miguel Ángel Pérez
Fedora-laptop-list mailing list Fedora-laptop-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-laptop-list
Fedora-laptop-list mailing list Fedora-laptop-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-laptop-list
-- Regards, Miguel Ángel Pérez
Miguel Angel Perez wrote:
You can also attach them in your next reply so people in this list can also take a look at it.
Good point Miguel, my dmesg logs are attached.
Jim
Initializing cgroup subsys cpuset Linux version 2.6.27.7-53.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu Nov 27 02:05:02 EST 2008 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bf00000 (usable) BIOS-e820: 000000003bf00000 - 000000003bf16000 (ACPI data) BIOS-e820: 000000003bf16000 - 000000003bf80000 (ACPI NVS) BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x3bf00 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 003be00000 page 2M 003be00000 - 003bf00000 page 4k kernel direct mapping tables up to 3bf00000 @ 8000-b000 last_map_addr: 3bf00000 end: 3bf00000 RAMDISK: 37c7e000 - 37fefa22 Presario F700: using 0xed I/O delay port ACPI: RSDP 000F8920, 0014 (r0 HP ) ACPI: RSDT 3BF0D36A, 003C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) ACPI: FACP 3BF15CCE, 0074 (r1 HP MCP51M 6040000 PTL_ F4240) ACPI: DSDT 3BF0D3A6, 8928 (r1 HP MCP51M 6040000 MSFT 3000000) ACPI: FACS 3BF16FC0, 0040 ACPI: SSDT 3BF15D42, 01C4 (r1 HP POWERNOW 6040000 LTP 1) ACPI: MCFG 3BF15F06, 003C (r1 HP MCFG 6040000 LTP 0) ACPI: HPET 3BF15F42, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) ACPI: APIC 3BF15F7A, 005E (r1 HP APIC 6040000 LTP 0) ACPI: BOOT 3BF15FD8, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1) ACPI: DMI detected: Hewlett-Packard Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000003bf00000 Bootmem setup node 0 0000000000000000-000000003bf00000 NODE_DATA [0000000000009000 - 000000000001dfff] bootmap [000000000001e000 - 00000000000257df] pages 8 (6 early reservations) ==> bootmem [0000000000 - 003bf00000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000096fdac] TEXT DATA BSS ==> [0000200000 - 000096fdac] #3 [0037c7e000 - 0037fefa22] RAMDISK ==> [0037c7e000 - 0037fefa22] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] found SMP MP-table at [ffff8800000f8950] 000f8950 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x0003bf00 On node 0 totalpages: 245405 DMA zone: 1934 pages, LIFO batch:0 DMA32 zone: 238107 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) PERCPU: Allocating 64928 bytes of per cpu data NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 240041 Policy zone: DMA32 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1707.730 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Node 0: aperture @ a47e000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 955740k/982016k available (2848k kernel code, 25880k reserved, 1583k data, 1264k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3415.46 BogoMIPS (lpj=1707730) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 0/0 -> Node 0 tseg: 003bf80000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor TK-53 stepping 01 Using local APIC timer interrupts. APIC timer calibration result 12556851 Detected 12.556 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3415.33 BogoMIPS (lpj=1707666) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor TK-53 stepping 01 Brought up 2 CPUs Total of 2 processors activated (6830.79 BogoMIPS). System has AMD C1E enabled Switch to broadcast mode on CPU1 sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5856 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 Switch to broadcast mode on CPU0 net_namespace: 1552 bytes Booting paravirtualized kernel on bare hardware Time: 15:10:25 Date: 12/14/08 NET: Registered protocol family 16 No dock devices found. node 0 link 0: io port [1000, fffff] TOM: 0000000040000000 aka 1024M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [40000000, fe0bffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [40000000, fcffffffff] bus: 00 index 2 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e06fffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:03.0: PME# disabled PCI: 0000:00:05.0 reg 10 32bit mmio: [b2000000, b2ffffff] PCI: 0000:00:05.0 reg 14 64bit mmio: [c0000000, cfffffff] PCI: 0000:00:05.0 reg 1c 64bit mmio: [b1000000, b1ffffff] PCI: 0000:00:05.0 reg 30 32bit mmio: [0, 1ffff] PCI: 0000:00:0a.0 reg 10 io port: [1d00, 1d7f] PCI: 0000:00:0a.1 reg 20 io port: [3040, 307f] PCI: 0000:00:0a.1 reg 24 io port: [3000, 303f] pci 0000:00:0a.1: PME# supported from D3hot D3cold pci 0000:00:0a.1: PME# disabled PCI: 0000:00:0a.3 reg 10 32bit mmio: [b0040000, b007ffff] PCI: 0000:00:0b.0 reg 10 32bit mmio: [b0004000, b0004fff] pci 0000:00:0b.0: supports D1 pci 0000:00:0b.0: supports D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled PCI: 0000:00:0b.1 reg 10 32bit mmio: [b0005000, b00050ff] pci 0000:00:0b.1: supports D1 pci 0000:00:0b.1: supports D2 pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.1: PME# disabled PCI: 0000:00:0d.0 reg 20 io port: [3080, 308f] PCI: 0000:00:0e.0 reg 10 io port: [30c0, 30c7] PCI: 0000:00:0e.0 reg 14 io port: [30b4, 30b7] PCI: 0000:00:0e.0 reg 18 io port: [30b8, 30bf] PCI: 0000:00:0e.0 reg 1c io port: [30b0, 30b3] PCI: 0000:00:0e.0 reg 20 io port: [3090, 309f] PCI: 0000:00:0e.0 reg 24 32bit mmio: [b0006000, b0006fff] PCI: 0000:00:10.1 reg 10 32bit mmio: [b0000000, b0003fff] pci 0000:00:10.1: PME# supported from D3hot D3cold pci 0000:00:10.1: PME# disabled PCI: 0000:00:14.0 reg 10 32bit mmio: [b0008000, b0008fff] PCI: 0000:00:14.0 reg 14 io port: [30e0, 30e7] pci 0000:00:14.0: supports D1 pci 0000:00:14.0: supports D2 pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.0: PME# disabled PCI: bridge 0000:00:02.0 io port: [4000, 4fff] PCI: bridge 0000:00:02.0 32bit mmio: [b4000000, b7ffffff] PCI: bridge 0000:00:02.0 64bit mmio pref: [d0000000, d01fffff] PCI: 0000:03:00.0 reg 10 64bit mmio: [b8000000, b8003fff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: supports D2 PCI: bridge 0000:00:03.0 32bit mmio: [b8000000, bbffffff] pci 0000:00:10.0: transparent bridge ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *10 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 tracer: 1286 pages allocated for 65536 entries of 80 bytes actual entries 65586 ACPI: RTC can wake from S4 system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved system 00:03: iomem range 0xe0000000-0xefffffff could not be reserved system 00:04: ioport range 0x1000-0x107f has been reserved system 00:04: ioport range 0x1080-0x10ff has been reserved system 00:04: ioport range 0x1400-0x147f has been reserved system 00:04: ioport range 0x1480-0x14ff has been reserved system 00:04: ioport range 0x1800-0x187f has been reserved system 00:04: ioport range 0x1880-0x18ff has been reserved system 00:04: ioport range 0x2000-0x203f has been reserved system 00:05: ioport range 0x360-0x361 has been reserved system 00:05: ioport range 0x380-0x383 has been reserved system 00:05: ioport range 0x4d0-0x4d1 has been reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0x4000-0x4fff pci 0000:00:02.0: MEM window: 0xb4000000-0xb7ffffff pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: 0xb8000000-0xbbffffff pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:10.0: PCI bridge, secondary bus 0000:07 pci 0000:00:10.0: IO window: disabled pci 0000:00:10.0: MEM window: disabled pci 0000:00:10.0: PREFETCH window: disabled pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:10.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [4000, 4fff] bus: 01 index 1 mmio: [b4000000, b7ffffff] bus: 01 index 2 mmio: [d0000000, d01fffff] bus: 01 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [b8000000, bbffffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 07 index 0 mmio: [0, 0] bus: 07 index 1 mmio: [0, 0] bus: 07 index 2 mmio: [0, 0] bus: 07 index 3 io port: [0, ffff] bus: 07 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 3526k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1229267425.503:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1873 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:02.0: Enabling HT MSI Mapping pci 0000:00:03.0: Enabling HT MSI Mapping pci 0000:00:05.0: Boot video device pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:10.0: Enabling HT MSI Mapping pci 0000:00:10.1: Enabling HT MSI Mapping pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service pci_express 0000:00:02.0:pcie03: allocate port service pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: found MSI capability pci_express 0000:00:03.0:pcie00: allocate port service pci_express 0000:00:03.0:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID] ACPI: processor limited to max C-state 1 processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (49 C) hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Magic number: 4:296:184 acpi LNXTHERM:00: hash matches Freeing unused kernel memory: 1264k freed Write protecting the kernel read-only data: 4060k ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23 ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, high) -> IRQ 23 ehci_hcd 0000:00:0b.1: setting latency timer to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported ehci_hcd 0000:00:0b.1: irq 23, io mem 0xb0005000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.7-53.fc9.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:0b.1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:0b.0: setting latency timer to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.7-53.fc9.x86_64 ohci_hcd usb usb2: SerialNumber: 0000:00:0b.0 USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. sata_nv 0000:00:0e.0: version 3.5 sata_nv 0000:00:0e.0: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 21 (level, high) -> IRQ 21 sata_nv 0000:00:0e.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 21 ata2: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 21 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: FUJITSU MHW2080BH PL, 891F, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2080B 891F PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk pata_acpi 0000:00:0d.0: setting latency timer to 64 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com pata_amd 0000:00:0d.0: version 0.3.10 pata_amd 0000:00:0d.0: setting latency timer to 64 scsi2 : pata_amd scsi3 : pata_amd ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 ata3.00: ATAPI: Optiarc DVD RW AD-7530B, NH02, max MWDMA2 ata3: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) ata3.00: configured for MWDMA2 ata4: port disabled. ignoring. scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NH02 PQ: 0 ANSI: 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1229267435.383:2): selinux=0 auid=4294967295 ses=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 2:0:0:0: Attached scsi generic sg1 type 5 ndiswrapper version 1.53 loaded (smp=yes, preempt=no) input: PC Speaker as /devices/platform/pcspkr/input/input7 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20 forcedeth 0000:00:14.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [ACAD] (off-line) ACPI: WMI: Mapper loaded acpi device:24: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/input/input8 forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:b8:68:e2 forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3 ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) acpi device:2a: registered as cooling_device3 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:27/device:28/input/input9 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ndiswrapper (link_pe_images:575): fixing KI_USER_SHARED_DATA address in the driver ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 19 ndiswrapper 0000:03:00.0: PCI INT A -> Link[LK1E] -> GSI 19 (level, high) -> IRQ 19 ndiswrapper 0000:03:00.0: setting latency timer to 64 ndiswrapper: using IRQ 19 wlan0: ethernet device 00:1a:73:5b:15:cf using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4311.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK nvidia 0000:00:05.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18 nvidia 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) -> IRQ 18 nvidia 0000:00:05.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.15 Fri Oct 31 14:32:55 PST 2008 usbcore: registered new interface driver ndiswrapper ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17 HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 17 (level, high) -> IRQ 17 HDA Intel 0000:00:10.1: setting latency timer to 64 usbcore: registered new interface driver snd-usb-audio NET: Registered protocol family 10 lo: Disabled Privacy Extensions Clocksource tsc unstable (delta = 4398045828766 ns) device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1933304k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:1933304k RPC: Registered udp transport module. RPC: Registered tcp transport module. warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. fuse init (API version 7.9) Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) iscsi: registered transport (iser) Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. Not cloning cgroup for unused subsystem ns virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. virbr0: starting userspace STP failed, starting kernel STP ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (7680 buckets, 30720 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. eth0: no link during initialization. ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready virbr0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present
Hi, two tips:
This is the output of dmesg from init to the point where your keys start working?
An attached copy of /var/log/messages content when your keys start working can be usefull too (please don't paste it in the body).
2008/12/14 Jim Duda jim@duda.tzo.com
Miguel Angel Perez wrote:
You can also attach them in your next reply so people in this list can also take a look at it.
Good point Miguel, my dmesg logs are attached.
Jim
Initializing cgroup subsys cpuset Linux version 2.6.27.7-53.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu Nov 27 02:05:02 EST 2008 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bf00000 (usable) BIOS-e820: 000000003bf00000 - 000000003bf16000 (ACPI data) BIOS-e820: 000000003bf16000 - 000000003bf80000 (ACPI NVS) BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x3bf00 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 003be00000 page 2M 003be00000 - 003bf00000 page 4k kernel direct mapping tables up to 3bf00000 @ 8000-b000 last_map_addr: 3bf00000 end: 3bf00000 RAMDISK: 37c7e000 - 37fefa22 Presario F700: using 0xed I/O delay port ACPI: RSDP 000F8920, 0014 (r0 HP ) ACPI: RSDT 3BF0D36A, 003C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) ACPI: FACP 3BF15CCE, 0074 (r1 HP MCP51M 6040000 PTL_ F4240) ACPI: DSDT 3BF0D3A6, 8928 (r1 HP MCP51M 6040000 MSFT 3000000) ACPI: FACS 3BF16FC0, 0040 ACPI: SSDT 3BF15D42, 01C4 (r1 HP POWERNOW 6040000 LTP 1) ACPI: MCFG 3BF15F06, 003C (r1 HP MCFG 6040000 LTP 0) ACPI: HPET 3BF15F42, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) ACPI: APIC 3BF15F7A, 005E (r1 HP APIC 6040000 LTP 0) ACPI: BOOT 3BF15FD8, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1) ACPI: DMI detected: Hewlett-Packard Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000003bf00000 Bootmem setup node 0 0000000000000000-000000003bf00000 NODE_DATA [0000000000009000 - 000000000001dfff] bootmap [000000000001e000 - 00000000000257df] pages 8 (6 early reservations) ==> bootmem [0000000000 - 003bf00000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000096fdac] TEXT DATA BSS ==> [0000200000 - 000096fdac] #3 [0037c7e000 - 0037fefa22] RAMDISK ==> [0037c7e000 - 0037fefa22] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] found SMP MP-table at [ffff8800000f8950] 000f8950 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x0003bf00 On node 0 totalpages: 245405 DMA zone: 1934 pages, LIFO batch:0 DMA32 zone: 238107 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) PERCPU: Allocating 64928 bytes of per cpu data NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 240041 Policy zone: DMA32 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1707.730 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Node 0: aperture @ a47e000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 955740k/982016k available (2848k kernel code, 25880k reserved, 1583k data, 1264k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3415.46 BogoMIPS (lpj=1707730) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 0/0 -> Node 0 tseg: 003bf80000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor TK-53 stepping 01 Using local APIC timer interrupts. APIC timer calibration result 12556851 Detected 12.556 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3415.33 BogoMIPS (lpj=1707666) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor TK-53 stepping 01 Brought up 2 CPUs Total of 2 processors activated (6830.79 BogoMIPS). System has AMD C1E enabled Switch to broadcast mode on CPU1 sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5856 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 Switch to broadcast mode on CPU0 net_namespace: 1552 bytes Booting paravirtualized kernel on bare hardware Time: 15:10:25 Date: 12/14/08 NET: Registered protocol family 16 No dock devices found. node 0 link 0: io port [1000, fffff] TOM: 0000000040000000 aka 1024M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [40000000, fe0bffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [40000000, fcffffffff] bus: 00 index 2 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e06fffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:03.0: PME# disabled PCI: 0000:00:05.0 reg 10 32bit mmio: [b2000000, b2ffffff] PCI: 0000:00:05.0 reg 14 64bit mmio: [c0000000, cfffffff] PCI: 0000:00:05.0 reg 1c 64bit mmio: [b1000000, b1ffffff] PCI: 0000:00:05.0 reg 30 32bit mmio: [0, 1ffff] PCI: 0000:00:0a.0 reg 10 io port: [1d00, 1d7f] PCI: 0000:00:0a.1 reg 20 io port: [3040, 307f] PCI: 0000:00:0a.1 reg 24 io port: [3000, 303f] pci 0000:00:0a.1: PME# supported from D3hot D3cold pci 0000:00:0a.1: PME# disabled PCI: 0000:00:0a.3 reg 10 32bit mmio: [b0040000, b007ffff] PCI: 0000:00:0b.0 reg 10 32bit mmio: [b0004000, b0004fff] pci 0000:00:0b.0: supports D1 pci 0000:00:0b.0: supports D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled PCI: 0000:00:0b.1 reg 10 32bit mmio: [b0005000, b00050ff] pci 0000:00:0b.1: supports D1 pci 0000:00:0b.1: supports D2 pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.1: PME# disabled PCI: 0000:00:0d.0 reg 20 io port: [3080, 308f] PCI: 0000:00:0e.0 reg 10 io port: [30c0, 30c7] PCI: 0000:00:0e.0 reg 14 io port: [30b4, 30b7] PCI: 0000:00:0e.0 reg 18 io port: [30b8, 30bf] PCI: 0000:00:0e.0 reg 1c io port: [30b0, 30b3] PCI: 0000:00:0e.0 reg 20 io port: [3090, 309f] PCI: 0000:00:0e.0 reg 24 32bit mmio: [b0006000, b0006fff] PCI: 0000:00:10.1 reg 10 32bit mmio: [b0000000, b0003fff] pci 0000:00:10.1: PME# supported from D3hot D3cold pci 0000:00:10.1: PME# disabled PCI: 0000:00:14.0 reg 10 32bit mmio: [b0008000, b0008fff] PCI: 0000:00:14.0 reg 14 io port: [30e0, 30e7] pci 0000:00:14.0: supports D1 pci 0000:00:14.0: supports D2 pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.0: PME# disabled PCI: bridge 0000:00:02.0 io port: [4000, 4fff] PCI: bridge 0000:00:02.0 32bit mmio: [b4000000, b7ffffff] PCI: bridge 0000:00:02.0 64bit mmio pref: [d0000000, d01fffff] PCI: 0000:03:00.0 reg 10 64bit mmio: [b8000000, b8003fff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: supports D2 PCI: bridge 0000:00:03.0 32bit mmio: [b8000000, bbffffff] pci 0000:00:10.0: transparent bridge ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *10 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 tracer: 1286 pages allocated for 65536 entries of 80 bytes actual entries 65586 ACPI: RTC can wake from S4 system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved system 00:03: iomem range 0xe0000000-0xefffffff could not be reserved system 00:04: ioport range 0x1000-0x107f has been reserved system 00:04: ioport range 0x1080-0x10ff has been reserved system 00:04: ioport range 0x1400-0x147f has been reserved system 00:04: ioport range 0x1480-0x14ff has been reserved system 00:04: ioport range 0x1800-0x187f has been reserved system 00:04: ioport range 0x1880-0x18ff has been reserved system 00:04: ioport range 0x2000-0x203f has been reserved system 00:05: ioport range 0x360-0x361 has been reserved system 00:05: ioport range 0x380-0x383 has been reserved system 00:05: ioport range 0x4d0-0x4d1 has been reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0x4000-0x4fff pci 0000:00:02.0: MEM window: 0xb4000000-0xb7ffffff pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: 0xb8000000-0xbbffffff pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:10.0: PCI bridge, secondary bus 0000:07 pci 0000:00:10.0: IO window: disabled pci 0000:00:10.0: MEM window: disabled pci 0000:00:10.0: PREFETCH window: disabled pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:10.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [4000, 4fff] bus: 01 index 1 mmio: [b4000000, b7ffffff] bus: 01 index 2 mmio: [d0000000, d01fffff] bus: 01 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [b8000000, bbffffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 07 index 0 mmio: [0, 0] bus: 07 index 1 mmio: [0, 0] bus: 07 index 2 mmio: [0, 0] bus: 07 index 3 io port: [0, ffff] bus: 07 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 3526k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1229267425.503:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1873 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:02.0: Enabling HT MSI Mapping pci 0000:00:03.0: Enabling HT MSI Mapping pci 0000:00:05.0: Boot video device pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:10.0: Enabling HT MSI Mapping pci 0000:00:10.1: Enabling HT MSI Mapping pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service pci_express 0000:00:02.0:pcie03: allocate port service pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: found MSI capability pci_express 0000:00:03.0:pcie00: allocate port service pci_express 0000:00:03.0:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID] ACPI: processor limited to max C-state 1 processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (49 C) hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Magic number: 4:296:184 acpi LNXTHERM:00: hash matches Freeing unused kernel memory: 1264k freed Write protecting the kernel read-only data: 4060k ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23 ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, high) -> IRQ 23 ehci_hcd 0000:00:0b.1: setting latency timer to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported ehci_hcd 0000:00:0b.1: irq 23, io mem 0xb0005000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.7-53.fc9.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:0b.1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:0b.0: setting latency timer to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.7-53.fc9.x86_64 ohci_hcd usb usb2: SerialNumber: 0000:00:0b.0 USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. sata_nv 0000:00:0e.0: version 3.5 sata_nv 0000:00:0e.0: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 21 (level, high) -> IRQ 21 sata_nv 0000:00:0e.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 21 ata2: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 21 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: FUJITSU MHW2080BH PL, 891F, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2080B 891F PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk pata_acpi 0000:00:0d.0: setting latency timer to 64 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com pata_amd 0000:00:0d.0: version 0.3.10 pata_amd 0000:00:0d.0: setting latency timer to 64 scsi2 : pata_amd scsi3 : pata_amd ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 ata3.00: ATAPI: Optiarc DVD RW AD-7530B, NH02, max MWDMA2 ata3: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) ata3.00: configured for MWDMA2 ata4: port disabled. ignoring. scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NH02 PQ: 0 ANSI: 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1229267435.383:2): selinux=0 auid=4294967295 ses=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 2:0:0:0: Attached scsi generic sg1 type 5 ndiswrapper version 1.53 loaded (smp=yes, preempt=no) input: PC Speaker as /devices/platform/pcspkr/input/input7 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20 forcedeth 0000:00:14.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [ACAD] (off-line) ACPI: WMI: Mapper loaded acpi device:24: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/input/input8 forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:b8:68:e2 forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3 ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) acpi device:2a: registered as cooling_device3 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:27/device:28/input/input9 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ndiswrapper (link_pe_images:575): fixing KI_USER_SHARED_DATA address in the driver ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 19 ndiswrapper 0000:03:00.0: PCI INT A -> Link[LK1E] -> GSI 19 (level, high) -> IRQ 19 ndiswrapper 0000:03:00.0: setting latency timer to 64 ndiswrapper: using IRQ 19 wlan0: ethernet device 00:1a:73:5b:15:cf using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4311.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK nvidia 0000:00:05.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18 nvidia 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) -> IRQ 18 nvidia 0000:00:05.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.15 Fri Oct 31 14:32:55 PST 2008 usbcore: registered new interface driver ndiswrapper ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17 HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 17 (level, high) -> IRQ 17 HDA Intel 0000:00:10.1: setting latency timer to 64 usbcore: registered new interface driver snd-usb-audio NET: Registered protocol family 10 lo: Disabled Privacy Extensions Clocksource tsc unstable (delta = 4398045828766 ns) device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1933304k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:1933304k RPC: Registered udp transport module. RPC: Registered tcp transport module. warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. fuse init (API version 7.9) Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) iscsi: registered transport (iser) Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. Not cloning cgroup for unused subsystem ns virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. virbr0: starting userspace STP failed, starting kernel STP ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (7680 buckets, 30720 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. eth0: no link during initialization. ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready virbr0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present
Fedora-laptop-list mailing list Fedora-laptop-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-laptop-list
-- Regards, Miguel Ángel Pérez
Miguel,
This is the output when the keys start working. I don't have one with the keys NOT working, since, I cannot login when the keys are not working.
Jim
Miguel Angel Perez wrote:
Hi, two tips:
This is the output of dmesg from init to the point where your keys start working?
An attached copy of /var/log/messages content when your keys start working can be usefull too (please don't paste it in the body).
2008/12/14 Jim Duda <jim@duda.tzo.com mailto:jim@duda.tzo.com>
Miguel Angel Perez wrote: You can also attach them in your next reply so people in this list can also take a look at it. Good point Miguel, my dmesg logs are attached. Jim Initializing cgroup subsys cpuset Linux version 2.6.27.7-53.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu Nov 27 02:05:02 EST 2008 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bf00000 (usable) BIOS-e820: 000000003bf00000 - 000000003bf16000 (ACPI data) BIOS-e820: 000000003bf16000 - 000000003bf80000 (ACPI NVS) BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x3bf00 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 003be00000 page 2M 003be00000 - 003bf00000 page 4k kernel direct mapping tables up to 3bf00000 @ 8000-b000 last_map_addr: 3bf00000 end: 3bf00000 RAMDISK: 37c7e000 - 37fefa22 Presario F700: using 0xed I/O delay port ACPI: RSDP 000F8920, 0014 (r0 HP ) ACPI: RSDT 3BF0D36A, 003C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) ACPI: FACP 3BF15CCE, 0074 (r1 HP MCP51M 6040000 PTL_ F4240) ACPI: DSDT 3BF0D3A6, 8928 (r1 HP MCP51M 6040000 MSFT 3000000) ACPI: FACS 3BF16FC0, 0040 ACPI: SSDT 3BF15D42, 01C4 (r1 HP POWERNOW 6040000 LTP 1) ACPI: MCFG 3BF15F06, 003C (r1 HP MCFG 6040000 LTP 0) ACPI: HPET 3BF15F42, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) ACPI: APIC 3BF15F7A, 005E (r1 HP APIC 6040000 LTP 0) ACPI: BOOT 3BF15FD8, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1) ACPI: DMI detected: Hewlett-Packard Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000003bf00000 Bootmem setup node 0 0000000000000000-000000003bf00000 NODE_DATA [0000000000009000 - 000000000001dfff] bootmap [000000000001e000 - 00000000000257df] pages 8 (6 early reservations) ==> bootmem [0000000000 - 003bf00000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000096fdac] TEXT DATA BSS ==> [0000200000 - 000096fdac] #3 [0037c7e000 - 0037fefa22] RAMDISK ==> [0037c7e000 - 0037fefa22] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] found SMP MP-table at [ffff8800000f8950] 000f8950 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x0003bf00 On node 0 totalpages: 245405 DMA zone: 1934 pages, LIFO batch:0 DMA32 zone: 238107 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) PERCPU: Allocating 64928 bytes of per cpu data NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 240041 Policy zone: DMA32 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1707.730 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Node 0: aperture @ a47e000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 955740k/982016k available (2848k kernel code, 25880k reserved, 1583k data, 1264k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3415.46 BogoMIPS (lpj=1707730) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 0/0 -> Node 0 tseg: 003bf80000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor TK-53 stepping 01 Using local APIC timer interrupts. APIC timer calibration result 12556851 Detected 12.556 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3415.33 BogoMIPS (lpj=1707666) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor TK-53 stepping 01 Brought up 2 CPUs Total of 2 processors activated (6830.79 BogoMIPS). System has AMD C1E enabled Switch to broadcast mode on CPU1 sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5856 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 Switch to broadcast mode on CPU0 net_namespace: 1552 bytes Booting paravirtualized kernel on bare hardware Time: 15:10:25 Date: 12/14/08 NET: Registered protocol family 16 No dock devices found. node 0 link 0: io port [1000, fffff] TOM: 0000000040000000 aka 1024M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [40000000, fe0bffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [40000000, fcffffffff] bus: 00 index 2 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e06fffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:03.0: PME# disabled PCI: 0000:00:05.0 reg 10 32bit mmio: [b2000000, b2ffffff] PCI: 0000:00:05.0 reg 14 64bit mmio: [c0000000, cfffffff] PCI: 0000:00:05.0 reg 1c 64bit mmio: [b1000000, b1ffffff] PCI: 0000:00:05.0 reg 30 32bit mmio: [0, 1ffff] PCI: 0000:00:0a.0 reg 10 io port: [1d00, 1d7f] PCI: 0000:00:0a.1 reg 20 io port: [3040, 307f] PCI: 0000:00:0a.1 reg 24 io port: [3000, 303f] pci 0000:00:0a.1: PME# supported from D3hot D3cold pci 0000:00:0a.1: PME# disabled PCI: 0000:00:0a.3 reg 10 32bit mmio: [b0040000, b007ffff] PCI: 0000:00:0b.0 reg 10 32bit mmio: [b0004000, b0004fff] pci 0000:00:0b.0: supports D1 pci 0000:00:0b.0: supports D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled PCI: 0000:00:0b.1 reg 10 32bit mmio: [b0005000, b00050ff] pci 0000:00:0b.1: supports D1 pci 0000:00:0b.1: supports D2 pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.1: PME# disabled PCI: 0000:00:0d.0 reg 20 io port: [3080, 308f] PCI: 0000:00:0e.0 reg 10 io port: [30c0, 30c7] PCI: 0000:00:0e.0 reg 14 io port: [30b4, 30b7] PCI: 0000:00:0e.0 reg 18 io port: [30b8, 30bf] PCI: 0000:00:0e.0 reg 1c io port: [30b0, 30b3] PCI: 0000:00:0e.0 reg 20 io port: [3090, 309f] PCI: 0000:00:0e.0 reg 24 32bit mmio: [b0006000, b0006fff] PCI: 0000:00:10.1 reg 10 32bit mmio: [b0000000, b0003fff] pci 0000:00:10.1: PME# supported from D3hot D3cold pci 0000:00:10.1: PME# disabled PCI: 0000:00:14.0 reg 10 32bit mmio: [b0008000, b0008fff] PCI: 0000:00:14.0 reg 14 io port: [30e0, 30e7] pci 0000:00:14.0: supports D1 pci 0000:00:14.0: supports D2 pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.0: PME# disabled PCI: bridge 0000:00:02.0 io port: [4000, 4fff] PCI: bridge 0000:00:02.0 32bit mmio: [b4000000, b7ffffff] PCI: bridge 0000:00:02.0 64bit mmio pref: [d0000000, d01fffff] PCI: 0000:03:00.0 reg 10 64bit mmio: [b8000000, b8003fff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: supports D2 PCI: bridge 0000:00:03.0 32bit mmio: [b8000000, bbffffff] pci 0000:00:10.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *10 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 tracer: 1286 pages allocated for 65536 entries of 80 bytes actual entries 65586 ACPI: RTC can wake from S4 system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved system 00:03: iomem range 0xe0000000-0xefffffff could not be reserved system 00:04: ioport range 0x1000-0x107f has been reserved system 00:04: ioport range 0x1080-0x10ff has been reserved system 00:04: ioport range 0x1400-0x147f has been reserved system 00:04: ioport range 0x1480-0x14ff has been reserved system 00:04: ioport range 0x1800-0x187f has been reserved system 00:04: ioport range 0x1880-0x18ff has been reserved system 00:04: ioport range 0x2000-0x203f has been reserved system 00:05: ioport range 0x360-0x361 has been reserved system 00:05: ioport range 0x380-0x383 has been reserved system 00:05: ioport range 0x4d0-0x4d1 has been reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0x4000-0x4fff pci 0000:00:02.0: MEM window: 0xb4000000-0xb7ffffff pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: 0xb8000000-0xbbffffff pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:10.0: PCI bridge, secondary bus 0000:07 pci 0000:00:10.0: IO window: disabled pci 0000:00:10.0: MEM window: disabled pci 0000:00:10.0: PREFETCH window: disabled pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:10.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [4000, 4fff] bus: 01 index 1 mmio: [b4000000, b7ffffff] bus: 01 index 2 mmio: [d0000000, d01fffff] bus: 01 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [b8000000, bbffffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 07 index 0 mmio: [0, 0] bus: 07 index 1 mmio: [0, 0] bus: 07 index 2 mmio: [0, 0] bus: 07 index 3 io port: [0, ffff] bus: 07 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 3526k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1229267425.503:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1873 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:02.0: Enabling HT MSI Mapping pci 0000:00:03.0: Enabling HT MSI Mapping pci 0000:00:05.0: Boot video device pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:10.0: Enabling HT MSI Mapping pci 0000:00:10.1: Enabling HT MSI Mapping pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service pci_express 0000:00:02.0:pcie03: allocate port service pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: found MSI capability pci_express 0000:00:03.0:pcie00: allocate port service pci_express 0000:00:03.0:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID] ACPI: processor limited to max C-state 1 processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (49 C) hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Magic number: 4:296:184 acpi LNXTHERM:00: hash matches Freeing unused kernel memory: 1264k freed Write protecting the kernel read-only data: 4060k ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23 ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, high) -> IRQ 23 ehci_hcd 0000:00:0b.1: setting latency timer to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported ehci_hcd 0000:00:0b.1: irq 23, io mem 0xb0005000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.7-53.fc9.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:0b.1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:0b.0: setting latency timer to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.7-53.fc9.x86_64 ohci_hcd usb usb2: SerialNumber: 0000:00:0b.0 USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. sata_nv 0000:00:0e.0: version 3.5 sata_nv 0000:00:0e.0: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 21 (level, high) -> IRQ 21 sata_nv 0000:00:0e.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 21 ata2: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 21 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: FUJITSU MHW2080BH PL, 891F, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2080B 891F PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk pata_acpi 0000:00:0d.0: setting latency timer to 64 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com <mailto:dm-devel@redhat.com> pata_amd 0000:00:0d.0: version 0.3.10 pata_amd 0000:00:0d.0: setting latency timer to 64 scsi2 : pata_amd scsi3 : pata_amd ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 ata3.00: ATAPI: Optiarc DVD RW AD-7530B, NH02, max MWDMA2 ata3: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) ata3.00: configured for MWDMA2 ata4: port disabled. ignoring. scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NH02 PQ: 0 ANSI: 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1229267435.383:2): selinux=0 auid=4294967295 ses=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 2:0:0:0: Attached scsi generic sg1 type 5 ndiswrapper version 1.53 loaded (smp=yes, preempt=no) input: PC Speaker as /devices/platform/pcspkr/input/input7 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20 forcedeth 0000:00:14.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [ACAD] (off-line) ACPI: WMI: Mapper loaded acpi device:24: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/input/input8 forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:b8:68:e2 forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3 ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) acpi device:2a: registered as cooling_device3 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:27/device:28/input/input9 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ndiswrapper (link_pe_images:575): fixing KI_USER_SHARED_DATA address in the driver ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5 <http://4.100.15.5>) loaded ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 19 ndiswrapper 0000:03:00.0: PCI INT A -> Link[LK1E] -> GSI 19 (level, high) -> IRQ 19 ndiswrapper 0000:03:00.0: setting latency timer to 64 ndiswrapper: using IRQ 19 wlan0: ethernet device 00:1a:73:5b:15:cf using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4311.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK nvidia 0000:00:05.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18 nvidia 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) -> IRQ 18 nvidia 0000:00:05.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.15 Fri Oct 31 14:32:55 PST 2008 usbcore: registered new interface driver ndiswrapper ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17 HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 17 (level, high) -> IRQ 17 HDA Intel 0000:00:10.1: setting latency timer to 64 usbcore: registered new interface driver snd-usb-audio NET: Registered protocol family 10 lo: Disabled Privacy Extensions Clocksource tsc unstable (delta = 4398045828766 ns) device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1933304k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:1933304k RPC: Registered udp transport module. RPC: Registered tcp transport module. warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. fuse init (API version 7.9) Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) iscsi: registered transport (iser) Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. Not cloning cgroup for unused subsystem ns virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. virbr0: starting userspace STP failed, starting kernel STP ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (7680 buckets, 30720 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. eth0: no link during initialization. ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready virbr0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present _______________________________________________ Fedora-laptop-list mailing list Fedora-laptop-list@redhat.com <mailto:Fedora-laptop-list@redhat.com> http://www.redhat.com/mailman/listinfo/fedora-laptop-list-- Regards, Miguel Ángel Pérez
Fedora-laptop-list mailing list Fedora-laptop-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-laptop-list
If I reboot the laptop after the keyboard starts working, it continues to work.
I think this is a mechanical heat issue. I'm going to open it up and reseat the keyboard connector, and attempt to swap it out too.
jim
Jim Duda wrote:
Miguel,
This is the output when the keys start working. I don't have one with the keys NOT working, since, I cannot login when the keys are not working.
Jim
Miguel Angel Perez wrote:
Hi, two tips:
This is the output of dmesg from init to the point where your keys start working?
An attached copy of /var/log/messages content when your keys start working can be usefull too (please don't paste it in the body).
2008/12/14 Jim Duda <jim@duda.tzo.com mailto:jim@duda.tzo.com>
Miguel Angel Perez wrote: You can also attach them in your next reply so people in this list can also take a look at it. Good point Miguel, my dmesg logs are attached. Jim Initializing cgroup subsys cpuset Linux version 2.6.27.7-53.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu Nov 27 02:05:02 EST 2008 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bf00000 (usable) BIOS-e820: 000000003bf00000 - 000000003bf16000 (ACPI data) BIOS-e820: 000000003bf16000 - 000000003bf80000 (ACPI NVS) BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x3bf00 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 003be00000 page 2M 003be00000 - 003bf00000 page 4k kernel direct mapping tables up to 3bf00000 @ 8000-b000 last_map_addr: 3bf00000 end: 3bf00000 RAMDISK: 37c7e000 - 37fefa22 Presario F700: using 0xed I/O delay port ACPI: RSDP 000F8920, 0014 (r0 HP ) ACPI: RSDT 3BF0D36A, 003C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) ACPI: FACP 3BF15CCE, 0074 (r1 HP MCP51M 6040000 PTL_ F4240) ACPI: DSDT 3BF0D3A6, 8928 (r1 HP MCP51M 6040000 MSFT 3000000) ACPI: FACS 3BF16FC0, 0040 ACPI: SSDT 3BF15D42, 01C4 (r1 HP POWERNOW 6040000 LTP 1) ACPI: MCFG 3BF15F06, 003C (r1 HP MCFG 6040000 LTP 0) ACPI: HPET 3BF15F42, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) ACPI: APIC 3BF15F7A, 005E (r1 HP APIC 6040000 LTP 0) ACPI: BOOT 3BF15FD8, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1) ACPI: DMI detected: Hewlett-Packard Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000003bf00000 Bootmem setup node 0 0000000000000000-000000003bf00000 NODE_DATA [0000000000009000 - 000000000001dfff] bootmap [000000000001e000 - 00000000000257df] pages 8 (6 early reservations) ==> bootmem [0000000000 - 003bf00000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000096fdac] TEXT DATA BSS ==> [0000200000 - 000096fdac] #3 [0037c7e000 - 0037fefa22] RAMDISK ==> [0037c7e000 - 0037fefa22] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] found SMP MP-table at [ffff8800000f8950] 000f8950 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x0003bf00 On node 0 totalpages: 245405 DMA zone: 1934 pages, LIFO batch:0 DMA32 zone: 238107 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) PERCPU: Allocating 64928 bytes of per cpu data NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 240041 Policy zone: DMA32 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1707.730 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Node 0: aperture @ a47e000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 955740k/982016k available (2848k kernel code, 25880k reserved, 1583k data, 1264k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3415.46 BogoMIPS (lpj=1707730) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 0/0 -> Node 0 tseg: 003bf80000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor TK-53 stepping 01 Using local APIC timer interrupts. APIC timer calibration result 12556851 Detected 12.556 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3415.33 BogoMIPS (lpj=1707666) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor TK-53 stepping 01 Brought up 2 CPUs Total of 2 processors activated (6830.79 BogoMIPS). System has AMD C1E enabled Switch to broadcast mode on CPU1 sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5856 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 Switch to broadcast mode on CPU0 net_namespace: 1552 bytes Booting paravirtualized kernel on bare hardware Time: 15:10:25 Date: 12/14/08 NET: Registered protocol family 16 No dock devices found. node 0 link 0: io port [1000, fffff] TOM: 0000000040000000 aka 1024M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [40000000, fe0bffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [40000000, fcffffffff] bus: 00 index 2 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e06fffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:03.0: PME# disabled PCI: 0000:00:05.0 reg 10 32bit mmio: [b2000000, b2ffffff] PCI: 0000:00:05.0 reg 14 64bit mmio: [c0000000, cfffffff] PCI: 0000:00:05.0 reg 1c 64bit mmio: [b1000000, b1ffffff] PCI: 0000:00:05.0 reg 30 32bit mmio: [0, 1ffff] PCI: 0000:00:0a.0 reg 10 io port: [1d00, 1d7f] PCI: 0000:00:0a.1 reg 20 io port: [3040, 307f] PCI: 0000:00:0a.1 reg 24 io port: [3000, 303f] pci 0000:00:0a.1: PME# supported from D3hot D3cold pci 0000:00:0a.1: PME# disabled PCI: 0000:00:0a.3 reg 10 32bit mmio: [b0040000, b007ffff] PCI: 0000:00:0b.0 reg 10 32bit mmio: [b0004000, b0004fff] pci 0000:00:0b.0: supports D1 pci 0000:00:0b.0: supports D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled PCI: 0000:00:0b.1 reg 10 32bit mmio: [b0005000, b00050ff] pci 0000:00:0b.1: supports D1 pci 0000:00:0b.1: supports D2 pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.1: PME# disabled PCI: 0000:00:0d.0 reg 20 io port: [3080, 308f] PCI: 0000:00:0e.0 reg 10 io port: [30c0, 30c7] PCI: 0000:00:0e.0 reg 14 io port: [30b4, 30b7] PCI: 0000:00:0e.0 reg 18 io port: [30b8, 30bf] PCI: 0000:00:0e.0 reg 1c io port: [30b0, 30b3] PCI: 0000:00:0e.0 reg 20 io port: [3090, 309f] PCI: 0000:00:0e.0 reg 24 32bit mmio: [b0006000, b0006fff] PCI: 0000:00:10.1 reg 10 32bit mmio: [b0000000, b0003fff] pci 0000:00:10.1: PME# supported from D3hot D3cold pci 0000:00:10.1: PME# disabled PCI: 0000:00:14.0 reg 10 32bit mmio: [b0008000, b0008fff] PCI: 0000:00:14.0 reg 14 io port: [30e0, 30e7] pci 0000:00:14.0: supports D1 pci 0000:00:14.0: supports D2 pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.0: PME# disabled PCI: bridge 0000:00:02.0 io port: [4000, 4fff] PCI: bridge 0000:00:02.0 32bit mmio: [b4000000, b7ffffff] PCI: bridge 0000:00:02.0 64bit mmio pref: [d0000000, d01fffff] PCI: 0000:03:00.0 reg 10 64bit mmio: [b8000000, b8003fff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: supports D2 PCI: bridge 0000:00:03.0 32bit mmio: [b8000000, bbffffff] pci 0000:00:10.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *10 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 tracer: 1286 pages allocated for 65536 entries of 80 bytes actual entries 65586 ACPI: RTC can wake from S4 system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved system 00:03: iomem range 0xe0000000-0xefffffff could not be reserved system 00:04: ioport range 0x1000-0x107f has been reserved system 00:04: ioport range 0x1080-0x10ff has been reserved system 00:04: ioport range 0x1400-0x147f has been reserved system 00:04: ioport range 0x1480-0x14ff has been reserved system 00:04: ioport range 0x1800-0x187f has been reserved system 00:04: ioport range 0x1880-0x18ff has been reserved system 00:04: ioport range 0x2000-0x203f has been reserved system 00:05: ioport range 0x360-0x361 has been reserved system 00:05: ioport range 0x380-0x383 has been reserved system 00:05: ioport range 0x4d0-0x4d1 has been reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0x4000-0x4fff pci 0000:00:02.0: MEM window: 0xb4000000-0xb7ffffff pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: 0xb8000000-0xbbffffff pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:10.0: PCI bridge, secondary bus 0000:07 pci 0000:00:10.0: IO window: disabled pci 0000:00:10.0: MEM window: disabled pci 0000:00:10.0: PREFETCH window: disabled pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:10.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [4000, 4fff] bus: 01 index 1 mmio: [b4000000, b7ffffff] bus: 01 index 2 mmio: [d0000000, d01fffff] bus: 01 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [b8000000, bbffffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 07 index 0 mmio: [0, 0] bus: 07 index 1 mmio: [0, 0] bus: 07 index 2 mmio: [0, 0] bus: 07 index 3 io port: [0, ffff] bus: 07 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 3526k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1229267425.503:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1873 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:02.0: Enabling HT MSI Mapping pci 0000:00:03.0: Enabling HT MSI Mapping pci 0000:00:05.0: Boot video device pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:10.0: Enabling HT MSI Mapping pci 0000:00:10.1: Enabling HT MSI Mapping pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service pci_express 0000:00:02.0:pcie03: allocate port service pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: found MSI capability pci_express 0000:00:03.0:pcie00: allocate port service pci_express 0000:00:03.0:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID] ACPI: processor limited to max C-state 1 processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (49 C) hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Magic number: 4:296:184 acpi LNXTHERM:00: hash matches Freeing unused kernel memory: 1264k freed Write protecting the kernel read-only data: 4060k ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23 ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, high) -> IRQ 23 ehci_hcd 0000:00:0b.1: setting latency timer to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported ehci_hcd 0000:00:0b.1: irq 23, io mem 0xb0005000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.7-53.fc9.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:0b.1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:0b.0: setting latency timer to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.7-53.fc9.x86_64 ohci_hcd usb usb2: SerialNumber: 0000:00:0b.0 USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. sata_nv 0000:00:0e.0: version 3.5 sata_nv 0000:00:0e.0: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 21 (level, high) -> IRQ 21 sata_nv 0000:00:0e.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 21 ata2: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 21 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: FUJITSU MHW2080BH PL, 891F, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2080B 891F PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk pata_acpi 0000:00:0d.0: setting latency timer to 64 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com <mailto:dm-devel@redhat.com> pata_amd 0000:00:0d.0: version 0.3.10 pata_amd 0000:00:0d.0: setting latency timer to 64 scsi2 : pata_amd scsi3 : pata_amd ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 ata3.00: ATAPI: Optiarc DVD RW AD-7530B, NH02, max MWDMA2 ata3: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) ata3.00: configured for MWDMA2 ata4: port disabled. ignoring. scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NH02 PQ: 0 ANSI: 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1229267435.383:2): selinux=0 auid=4294967295 ses=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 2:0:0:0: Attached scsi generic sg1 type 5 ndiswrapper version 1.53 loaded (smp=yes, preempt=no) input: PC Speaker as /devices/platform/pcspkr/input/input7 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20 forcedeth 0000:00:14.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [ACAD] (off-line) ACPI: WMI: Mapper loaded acpi device:24: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/input/input8 forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:b8:68:e2 forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3 ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) acpi device:2a: registered as cooling_device3 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:27/device:28/input/input9 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ndiswrapper (link_pe_images:575): fixing KI_USER_SHARED_DATA address in the driver ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5 <http://4.100.15.5>) loaded ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 19 ndiswrapper 0000:03:00.0: PCI INT A -> Link[LK1E] -> GSI 19 (level, high) -> IRQ 19 ndiswrapper 0000:03:00.0: setting latency timer to 64 ndiswrapper: using IRQ 19 wlan0: ethernet device 00:1a:73:5b:15:cf using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4311.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK nvidia 0000:00:05.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18 nvidia 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) -> IRQ 18 nvidia 0000:00:05.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.15 Fri Oct 31 14:32:55 PST 2008 usbcore: registered new interface driver ndiswrapper ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17 HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 17 (level, high) -> IRQ 17 HDA Intel 0000:00:10.1: setting latency timer to 64 usbcore: registered new interface driver snd-usb-audio NET: Registered protocol family 10 lo: Disabled Privacy Extensions Clocksource tsc unstable (delta = 4398045828766 ns) device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1933304k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:1933304k RPC: Registered udp transport module. RPC: Registered tcp transport module. warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. fuse init (API version 7.9) Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) iscsi: registered transport (iser) Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. Not cloning cgroup for unused subsystem ns virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. virbr0: starting userspace STP failed, starting kernel STP ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (7680 buckets, 30720 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. eth0: no link during initialization. ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready virbr0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present _______________________________________________ Fedora-laptop-list mailing list Fedora-laptop-list@redhat.com <mailto:Fedora-laptop-list@redhat.com> http://www.redhat.com/mailman/listinfo/fedora-laptop-list-- Regards, Miguel Ángel Pérez
Fedora-laptop-list mailing list Fedora-laptop-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-laptop-list
It might be worth checking you are using the latest BIOS version. There may have been keyboard mapping or fan related changes in a BIOS update.
For test purposes what happens if you boot up Fedora 10 from a CD or USB stick? Are any other devices connected when you have the problem?
laptop@lists.fedoraproject.org
-
Jim Duda -
Lalit Dhiri -
Miguel Ángel Pérez