Product: Fedora
https://bugzilla.redhat.com/show_bug.cgi?id=901899
--- Comment #16 from poma <pomidorabelisima(a)gmail.com> ---
There was a delay of 60 seconds:
https://bugzilla.redhat.com/show_bug.cgi?id=904232#c10
After upgrading to 'kmod-12-1', the delay is gone.
…
[…14:29:06…] Kernel command line: BOOT_IMAGE=/vmlinuz-3.7.5-201.fc18.x86_64 …
drm_kms_helper.edid_firmware=DVI-I-1:edid/JC07-01-WVGA-848.edid
…
[…14:29:08…] usb 1-6: new high-speed USB device number 6 using ehci_hcd
[…14:29:08…] usb 1-6: New USB device found, idVendor=17e9, idProduct=019e
[…14:29:08…] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
…
[…14:29:09…] usb 1-6: Product: FY USB-DVI
[…14:29:09…] usb 1-6: Manufacturer: DisplayLink
[…14:29:09…] usb 1-6: SerialNumber: USB_FY1704
…
[…14:29:10…] [drm] Initialized drm 1.1.0 20060810
[…14:29:10…] drm_kms_helper: Unknown parameter `edid'
…
[…14:29:25…] [drm] vendor descriptor length:1b data:1b 5f 01 00 19 05 00 01 03
00 04
…
[…14:29:25…] [drm] Got external EDID base block and 0 extensions from
"edid/JC07-01-WVGA-848.edid" for connector "DVI-I-1"
…
[…14:29:25…] open /dev/fb0 user=0 fb_info=ffff8800c7f2a800 count=1
[…14:29:25…] [drm] write mode info 153
[…14:29:25…] Console: switching to colour frame buffer device 100x37
…
[…14:29:25…] fb0: udldrmfb frame buffer device
[…14:29:25…] drm: registered panic notifier
[…14:29:25…] [drm] Initialized udl 0.0.1 20120220 on minor 0
…
[…14:29:25…] usbcore: registered new interface driver udl
…
[…14:29:26…] released /dev/fb0 user=0 count=0
…
[…14:29:40…] [drm] Got external EDID base block and 0 extensions from
"edid/JC07-01-WVGA-848.edid" for connector "DVI-I-1"
[…14:29:40…] [drm] Got external EDID base block and 0 extensions from
"edid/JC07-01-WVGA-848.edid" for connector "DVI-I-1"
[…14:29:40…] [drm] write mode info 153
[…14:29:43…] [drm] Got external EDID base block and 0 extensions from
"edid/JC07-01-WVGA-848.edid" for connector "DVI-I-1"
…
[…14:29:48…] [drm] Got external EDID base block and 0 extensions from
"edid/JC07-01-WVGA-848.edid" for connector "DVI-I-1"
…
In parallel with these, /etc/modprobe.d/drm_kms_helper.conf:
options drm_kms_helper edid_firmware=DVI-I-1:edid/JC07-01-WVGA-848.edid
actually has no effect.
Is this just a placeholder parameter or what?
--
You are receiving this mail because:
You are on the CC list for the bug.
Unsubscribe from this bug
https://bugzilla.redhat.com/token.cgi?t=pAFD2LLoua&a=cc_unsubscribe