From: Peter Robinson <pbrobinson(a)redhat.com>
Enable vxcan (for virtual can tunneling), ISO 15765-2:2016 CAN transport protocol
(for londer datagram protocols needed for certain L3 protocols such as
IP-over-CAN traffic) and SAE J1939 (for j1939 socket type used by datalink &
transport protocol as well as management).
These are all common protocols needed for modern CAN deployments.
Signed-off-by: Peter Robinson <pbrobinson(a)redhat.com>
---
redhat/configs/ark/generic/CONFIG_CAN_VXCAN | 1 -
.../configs/common/generic/CONFIG_CAN_ISOTP | 2 +-
.../configs/common/generic/CONFIG_CAN_J1939 | 2 +-
.../generic/CONFIG_CAN_VXCAN | 0
.../configs/fedora/generic/CONFIG_CAN_ISOTP | 25 -------------------
5 files changed, 2 insertions(+), 28 deletions(-)
delete mode 100644 redhat/configs/ark/generic/CONFIG_CAN_VXCAN
rename redhat/configs/{fedora => common}/generic/CONFIG_CAN_VXCAN (100%)
delete mode 100644 redhat/configs/fedora/generic/CONFIG_CAN_ISOTP
diff --git a/redhat/configs/ark/generic/CONFIG_CAN_VXCAN
b/redhat/configs/ark/generic/CONFIG_CAN_VXCAN
deleted file mode 100644
index 96b8266be4fb..000000000000
--- a/redhat/configs/ark/generic/CONFIG_CAN_VXCAN
+++ /dev/null
@@ -1 +0,0 @@
-# CONFIG_CAN_VXCAN is not set
diff --git a/redhat/configs/common/generic/CONFIG_CAN_ISOTP
b/redhat/configs/common/generic/CONFIG_CAN_ISOTP
index 2ebf8768a868..e349815188ee 100644
--- a/redhat/configs/common/generic/CONFIG_CAN_ISOTP
+++ b/redhat/configs/common/generic/CONFIG_CAN_ISOTP
@@ -1 +1 @@
-# CONFIG_CAN_ISOTP is not set
+CONFIG_CAN_ISOTP=m
diff --git a/redhat/configs/common/generic/CONFIG_CAN_J1939
b/redhat/configs/common/generic/CONFIG_CAN_J1939
index 38803167706f..6ce2acafacee 100644
--- a/redhat/configs/common/generic/CONFIG_CAN_J1939
+++ b/redhat/configs/common/generic/CONFIG_CAN_J1939
@@ -1 +1 @@
-# CONFIG_CAN_J1939 is not set
+CONFIG_CAN_J1939=m
diff --git a/redhat/configs/fedora/generic/CONFIG_CAN_VXCAN
b/redhat/configs/common/generic/CONFIG_CAN_VXCAN
similarity index 100%
rename from redhat/configs/fedora/generic/CONFIG_CAN_VXCAN
rename to redhat/configs/common/generic/CONFIG_CAN_VXCAN
diff --git a/redhat/configs/fedora/generic/CONFIG_CAN_ISOTP
b/redhat/configs/fedora/generic/CONFIG_CAN_ISOTP
deleted file mode 100644
index 58dd572e7fc7..000000000000
--- a/redhat/configs/fedora/generic/CONFIG_CAN_ISOTP
+++ /dev/null
@@ -1,25 +0,0 @@
-# CONFIG_CAN_ISOTP:
-#
-# CAN Transport Protocols offer support for segmented Point-to-Point
-# communication between CAN nodes via two defined CAN Identifiers.
-# As CAN frames can only transport a small amount of data bytes
-# (max. 8 bytes for 'classic' CAN and max. 64 bytes for CAN FD) this
-# segmentation is needed to transport longer PDUs as needed e.g. for
-# vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN traffic.
-# This protocol driver implements data transfers according to
-# ISO 15765-2:2016 for 'classic' CAN and CAN FD frame types.
-# If you want to perform automotive vehicle diagnostic services (UDS),
-# say 'y'.
-#
-# Symbol: CAN_ISOTP [=n]
-# Type : tristate
-# Defined at net/can/Kconfig:58
-# Prompt: ISO 15765-2:2016 CAN transport protocol
-# Depends on: NET [=y] && CAN [=m]
-# Location:
-# -> Networking support (NET [=y])
-# -> CAN bus subsystem support (CAN [=m])
-#
-#
-#
-# CONFIG_CAN_ISOTP is not set
--
GitLab