~Hi Doug,
I pulled down and burnt Fedora-IoT-dvd-x86_64-29-20181010.0.iso.
Booting for an install is not successful for me.
On lenovo x100e h/w resources I booted to the install and have an issue ~->
"dracut init-queue timeout " . That is similar to what I saw earlier with that
machine and the ACER.
Does a standard Fedora 29 install work on this device? Also what type
of storage are you trying to boot it from, or install it to?
Should I ,and where , send the rdsosreport.txt ? OR should I look
to another path/method to install?
Can I provide more details/information? Any next steps I should follow?
Let's try with a vanilla Fedora 29 install and we can then work out if
it's a generic or IoT specific issue. Laptops aren't really a targeted
device so it's not something that will have been tested widely. ATM
most of my x86_64 testing has actually been VMs.
I also pulled Fedora-IoT-29-20181010.0.aarch64.raw.xz and used
arm-image-installer. Using an SDCard that I had put raspbian and booted the pi 3 B+ that
ran. Same card that worked for a raspbian boot was used for the arm-image-installer
process. Booting with the SD card that the arm-image-installer wrote did not work.
I have Fedora IoT running OK on a standard RPi3, I'm awaiting more 3B+
devices but it should work, I need to re-provision mine again. What
options are you specifying for arm-image-installer (also what
version), serial console or HDMI?
At this point I have no running instances as I have wiped old
machines to move to the updates.
I was trying to get to recent version installed on the resources I have here for Fedora
IoT to get to more current.
If there is anything specific I can do to test or spend focus on, let me know.
See above
My goal is to see where I can start to add value. I feel that I am
having issues getting environments setup and am not able to get to working with IoT. What
am I missing? Short term I wanted to see where I could help and right now I feel like a
drag.
It feels a little bit like I am struggling at almost to basic of a level. I did not want
to burden the list with trivia as I want to help and not be a drain.
Feedback on things you might believe are missing in the getting
started guide would be a good start
https://docs.fedoraproject.org/en-US/iot/
Peter