On Tue, May 11, 2010 at 02:48:23PM -0500, Matt Domsch wrote:
The mirrorlists are falling over - haproxy keeps marking app servers
as down, and some requests are getting HTTP 503 Server Temporarily
Unavailable responses. This happens every 10 minutes, for 2-3
minutes, as several thousand EC3 instances request the mirrorlist
again.
For reference, we're seeing a spike of over 2000 simultaneous requests
across our 6 proxy and 4 app servers, occuring every 10 minutes,
dropping back down to under 20 simultaneous requests inbetween.
Trying out several things.
1) increase number of mirrorlist WSGI processes on each app server
from 45 to 100. This is the maximum number of simultaneous
mirrorlist requests that each server can serve. I've tried this
value on app01, and running this many still keeps the
mirrorlist_server back end (which fork()s on each connection)
humming right along. I think this is safe. Increasing much beyond
this though, the app servers will start to swap, which we must
avoid. We can watch the swapping, and if it starts, lower this
value somewhat. The value was 6 just a few days ago, which wasn't
working either.
This gives us 400 slots to work with on the app servers.
This seems okay as a temporary measure but we won't want this as a permanent
fix unless we can get more RAM for the app servers or separate app servers
for the mirrorlist processes.
The reason is that running close to swap means that we don't have room to
grow the other services if they need it, increase the mirrorlist processes
if we need even more slots, or add new services.
+1
2) try limiting the number of connections from each proxy server to
each app server, to 25 per. Right now we're seeing a max of
between 60 and 135 simultaneous requests from each proxy server to
each app server. All those over 25 will get queued by haproxy and
then served as app server instances become available. I did this
on proxy03, and it really helped out the app servers and kept them
humming. There were still some longish response times (some >30
seconds).
We're still oversubscribing app server slots here though, but
oddly, not by as much as you'd think, as proxy03 is taking 40% of
the incoming requests itself for some reason.
This does seem like a good thing to try and then decide if we want it
permanently.
+1
3) bump the haproxy timeout up to 60 seconds. 5 seconds (the global
default) is way too low when we get the spikes. This was causing
haproxy to think app servers were down, and start sending load to
the other app servers, which would then overload, and then start
sending to the first backup server, ... Let's be nicer. If during
a spike it takes 60 seconds to get an answer, or be told HTTP 503,
so be it.
60 seconds seems a bit long when something does happen to a single
server that should take it out of rotation for a bit. We aren't likely to
purposefully be doing things that take down app server during change freeze
but it's probably not a good idea to be quite this high in the long run.
Something to do for now but tweak some after the release?
+1
4) have haproxy use all the backup servers when all the app servers
are marked down. Right now it sends all the requests to a single
backup server, and if that's down, all to the next backup server,
etc. We know one server can't handle the load (even 4 aren't
really), so don't overload a single backup either.
+1
5) the default mirrorlist_server listen backlog is only 5, meaning
that at most 5 WSGI clients get queued up if all the children are
busy. To handle spikes, bump that to 300 (though it's limited by
the kernel to 128 by default). This was the intent, but the code was buggy.
+1
6) bug fix to mirrorlist_server to not ignore SIGCHLD. Amazing this
ever worked in the first place. This should resolve the problem
where mirrorlist_server slows down and memory grows over time.
+1
diff --git a/modules/haproxy/files/haproxy.cfg b/modules/haproxy/files/haproxy.cfg
index 6e538ed..5a6fda0 100644
--- a/modules/haproxy/files/haproxy.cfg
+++ b/modules/haproxy/files/haproxy.cfg
@@ -43,15 +43,17 @@ listen fp-wiki 0.0.0.0:10001
listen mirror-lists 0.0.0.0:10002
balance hdr(appserver)
- server app1 app1:80 check inter 5s rise 2 fall 3
- server app2 app2:80 check inter 5s rise 2 fall 3
- server app3 app3:80 check inter 5s rise 2 fall 3
- server app4 app4:80 check inter 5s rise 2 fall 3
- server app5 app5:80 backup check inter 10s rise 2 fall 3
- server app6 app6:80 backup check inter 10s rise 2 fall 3
- server app7 app7:80 check inter 5s rise 2 fall 3
- server bapp1 bapp1:80 backup check inter 5s rise 2 fall 3
+ timeout connect 60s
+ server app1 app1:80 check inter 5s rise 2 fall 3 maxconn 25
+ server app2 app2:80 check inter 5s rise 2 fall 3 maxconn 25
+ server app3 app3:80 check inter 5s rise 2 fall 3 maxconn 25
+ server app4 app4:80 check inter 5s rise 2 fall 3 maxconn 25
+ server app5 app5:80 backup check inter 10s rise 2 fall 3 maxconn 25
+ server app6 app6:80 backup check inter 10s rise 2 fall 3 maxconn 25
+ server app7 app7:80 check inter 5s rise 2 fall 3 maxconn 25
+ server bapp1 bapp1:80 backup check inter 5s rise 2 fall 3 maxconn 25
option httpchk GET /mirrorlist
+ option allbackups
listen pkgdb 0.0.0.0:10003
balance hdr(appserver)
diff --git a/modules/mirrormanager/files/mirrorlist-server.conf
b/modules/mirrormanager/files/mirrorlist-server.conf
index fd7cf98..482f7af 100644
--- a/modules/mirrormanager/files/mirrorlist-server.conf
+++ b/modules/mirrormanager/files/mirrorlist-server.conf
@@ -7,7 +7,7 @@ Alias /publiclist /var/lib/mirrormanager/mirrorlists/publiclist/
ExpiresDefault "modification plus 1 hour"
</Directory>
-WSGIDaemonProcess mirrorlist user=apache processes=45 threads=1 display-name=mirrorlist
maximum-requests=1000
+WSGIDaemonProcess mirrorlist user=apache processes=100 threads=1 display-name=mirrorlist
maximum-requests=1000
WSGIScriptAlias /metalink
/usr/share/mirrormanager/mirrorlist-server/mirrorlist_client.wsgi
WSGIScriptAlias /mirrorlist
/usr/share/mirrormanager/mirrorlist-server/mirrorlist_client.wsgi
>From 45d401446bfecba768fdf4f26409bf291172f7bc Mon Sep 17 00:00:00 2001
From: Matt Domsch <Matt_Domsch(a)dell.com>
Date: Mon, 10 May 2010 15:23:57 -0500
Subject: [PATCH 1/2] mirrorlist_server: set request_queue_size earlier
While the docs say that request_queue_size can be a per-instance
value, in reality it's used during ForkingUnixStreamServer __init__,
meaning it needs to override the default class attribute instead.
Moving this up means that connections aren't blocking after about 5
are already running (default), and mirrorlist_client can now connect
in ~200us like one would expect, rather than seconds or tens of
seconds like we were seeing when lots (say, 40+) clients were
connecting simultaneously.
---
mirrorlist-server/mirrorlist_server.py | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/mirrorlist-server/mirrorlist_server.py
b/mirrorlist-server/mirrorlist_server.py
index 8825a1a..2ade357 100755
--- a/mirrorlist-server/mirrorlist_server.py
+++ b/mirrorlist-server/mirrorlist_server.py
@@ -725,6 +725,7 @@ def sighup_handler(signum, frame):
signal.signal(signal.SIGHUP, sighup_handler)
class ForkingUnixStreamServer(ForkingMixIn, UnixStreamServer):
+ request_queue_size = 300
def finish_request(self, request, client_address):
signal.signal(signal.SIGHUP, signal.SIG_IGN)
BaseServer.finish_request(self, request, client_address)
@@ -815,7 +816,6 @@ def main():
signal.signal(signal.SIGHUP, sighup_handler)
signal.signal(signal.SIGCHLD, signal.SIG_IGN)
ss = ForkingUnixStreamServer(socketfile, MirrorlistHandler)
- ss.request_queue_size = 300
ss.serve_forever()
try:
--
1.7.0.1
>From d82f20b10c755e5ce40d67ca7ea4a6dba9e37d34 Mon Sep 17 00:00:00 2001
From: Matt Domsch <Matt_Domsch(a)dell.com>
Date: Mon, 10 May 2010 23:56:09 -0500
Subject: [PATCH 2/2] mirrorlist_server: don't ignore SIGCHLD
Amazing that this ever worked in the first place. Ignoring SIGCHLD
causes the parent's active_children list to grow without bound. This
is also probably the cause of our long-term memory size growth. The
parent really needs to catch SIGCHLD in order to do its reaping.
---
mirrorlist-server/mirrorlist_server.py | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/mirrorlist-server/mirrorlist_server.py
b/mirrorlist-server/mirrorlist_server.py
index 2ade357..0de7132 100755
--- a/mirrorlist-server/mirrorlist_server.py
+++ b/mirrorlist-server/mirrorlist_server.py
@@ -814,7 +814,6 @@ def main():
open_geoip_databases()
read_caches()
signal.signal(signal.SIGHUP, sighup_handler)
- signal.signal(signal.SIGCHLD, signal.SIG_IGN)
ss = ForkingUnixStreamServer(socketfile, MirrorlistHandler)
ss.serve_forever()
+1 to implementation
-Toshio