i18n-bugs June 2022

i18n-bugs@lists.fedoraproject.org

1 participants
171 discussions

[Bug 2068726] New: Culmus Hebrew fonts aren't usable by TeXLive after installation
by bugzilla＠redhat.com 27 Nov '24

27 Nov '24

https://bugzilla.redhat.com/show_bug.cgi?id=2068726 Bug ID: 2068726 Summary: Culmus Hebrew fonts aren't usable by TeXLive after installation Product: Fedora Version: 35 Status: NEW Component: culmus-fonts Assignee: pnemade(a)redhat.com Reporter: nikita(a)leshenko.net QA Contact: extras-qa(a)fedoraproject.org CC: i18n-bugs(a)lists.fedoraproject.org, petersen(a)redhat.com, pnemade(a)redhat.com, psatpute(a)redhat.com, vishalvijayraghavan(a)gmail.com Target Milestone: --- Link ID: Red Hat Bugzilla 1919932 Classification: Fedora Description of problem: On a clean Fedora 35 after installing texlive, babel-hebrew, and tex-fonts-hebrew, I can't use pdflatex to render a Hebrew document. Version-Release number of selected component (if applicable): texlive 9:2021-48.fc35 texlive-babel-hebrew 9:svn30273.2.3h-48.fc35 tex-fonts-hebrew 0.1-35.fc35 How reproducible: Always Steps to Reproduce: 1. Start a new Fedora 35 container: podman run -it fedora:35 2. dnf install texlive texlive-babel-hebrew tex-fonts-hebrew 3. Try to render hello.tex document listed below (this is a basic Hebrew document) using pdflatex (pdflatex hello.tex). \documentclass{article} \usepackage[utf8x]{inputenc} \usepackage[english,hebrew]{babel} \begin{document} שלום! \end{document} Actual results: Blank PDF Expected results: PDF with Hebrew text Additional info: On Fedora 33 this document caused an error, on Fedora 35 something changed and the error no longer appears, but the result is a bad document. -- You are receiving this mail because: You are on the CC list for the bug. https://bugzilla.redhat.com/show_bug.cgi?id=2068726

1 9

[Bug 1974076] New: Chinese input methods use previously enabled layout
by bugzilla＠redhat.com 11 Nov '24

11 Nov '24

https://bugzilla.redhat.com/show_bug.cgi?id=1974076 Bug ID: 1974076 Summary: Chinese input methods use previously enabled layout Product: Fedora Version: 34 Hardware: All OS: Linux Status: NEW Component: ibus-libpinyin Severity: medium Assignee: pwu(a)redhat.com Reporter: nickolay.ilyushin(a)gmail.com QA Contact: extras-qa(a)fedoraproject.org CC: i18n-bugs(a)lists.fedoraproject.org, petersen(a)redhat.com, pwu(a)redhat.com Target Milestone: --- Classification: Fedora Description of problem: ibus-libpinyin (and most probably several other input methods) uses `default` keyboard layout instead of `us` or whatever fits best. This effectively means that the last keyboard layout (non-IME) will be used for the pinyin input. For users which use non-Latin keyboard layouts, such as Russian or Ukrainian, this makes pinyin input unusable. Version-Release number of selected component (if applicable): 1.12.0 How reproducible: easily. Steps to Reproduce: 1. Enable pinyin input method in your settings. 2. Switch to e.g. Russian layout. 3. Switch to pinyin IME. 4. You will type Russian letters and pinyin IME will not trigger. Actual results: `4. You will type Russian letters and pinyin IME will not trigger.` Expected results: `4. You will type *Latin* letters and pinyin IME *will* trigger.` Additional info: There are two workarounds: 1. Manually patch `/usr/share/ibus/component/libpinyin.xml` and change `layout` to `us` from `default`. I don't know how this will work with non-QWERTY keyboards though. 2. Switch to a Latin layout before switching to pinyin. -- You are receiving this mail because: You are on the CC list for the bug.

1 8

[Bug 1999864] New: Cannot find package with font for Coptic although such a package exists for Fedora 34
by bugzilla＠redhat.com 19 Sep '24

19 Sep '24

https://bugzilla.redhat.com/show_bug.cgi?id=1999864 Bug ID: 1999864 Summary: Cannot find package with font for Coptic although such a package exists for Fedora 34 Product: Fedora Version: 34 Status: NEW Component: fontconfig Assignee: tagoh(a)redhat.com Reporter: mfabian(a)redhat.com QA Contact: extras-qa(a)fedoraproject.org CC: ajax(a)redhat.com, caillon+fedoraproject(a)gmail.com, fonts-bugs(a)lists.fedoraproject.org, gnome-sig(a)lists.fedoraproject.org, i18n-bugs(a)lists.fedoraproject.org, mclasen(a)redhat.com, pnemade(a)redhat.com, rhughes(a)redhat.com, rstrode(a)redhat.com, sandmann(a)redhat.com, tagoh(a)redhat.com Target Milestone: --- Classification: Fedora Created attachment 1819530 --> https://bugzilla.redhat.com/attachment.cgi?id=1819530&action=edit Gnome Software unable to find Coptic fonts Using Fedora-Workstation-Live-x86_64-34-1.2.iso in qemu. I played with emoji picker and Gnome popped up something requesting more fonts. I clicked and then Gnome Software said: “Unable to find the Coptic, Persian, Old (ca. 600-400 B.C.), Ugaritic you were searching for. Please see _the documentation_ for more information.” See attached screenshot. -- You are receiving this mail because: You are on the CC list for the bug.

1 15

[Fedora-i18n-bugs] [Bug 1936817] New: [abrt] kasumi-unicode: emission_find(): kasumi-unicode killed by SIGSEGV
by bugzilla＠redhat.com 13 Sep '24

13 Sep '24

https://bugzilla.redhat.com/show_bug.cgi?id=1936817 Bug ID: 1936817 Summary: [abrt] kasumi-unicode: emission_find(): kasumi-unicode killed by SIGSEGV Product: Fedora Version: 34 Hardware: x86_64 Status: NEW Whiteboard: abrt_hash:44f05d41fea2e8a472e511e723c030f064b80150;VAR IANT_ID=workstation; Component: kasumi Assignee: tagoh(a)redhat.com Reporter: mfabian(a)redhat.com QA Contact: extras-qa(a)fedoraproject.org CC: i18n-bugs(a)lists.fedoraproject.org, tagoh(a)redhat.com Target Milestone: --- Classification: Fedora Version-Release number of selected component: kasumi-unicode-2.5-33.fc34 Additional info: reporter: libreport-2.14.0 backtrace_rating: 4 cgroup: 0::/user.slice/user-1000.slice/user@1000.service/session.slice/org.gnome.Shell@wayland.service cmdline: kasumi-unicode crash_function: emission_find executable: /usr/bin/kasumi-unicode journald_cursor: s=4812fe31419f4a0d9519537873c0b262;i=1d75b;b=e33e48f83165443e996e9352116d67f6;m=a1416f520;t=5bd16d16bd6c8;x=215dd7f338688f54 kernel: 5.11.3-300.fc34.x86_64 rootdir: / runlevel: N 5 type: CCpp uid: 1000 Truncated backtrace: Thread no. 1 (10 frames) #0 emission_find at ../gobject/gsignal.c:893 #4 gtk_widget_dispose at /usr/src/debug/gtk3-3.24.26-1.fc34.x86_64/gtk/gtkwidget.c:12162 #7 _gtk_header_bar_update_window_buttons at /usr/src/debug/gtk3-3.24.26-1.fc34.x86_64/gtk/gtkheaderbar.c:474 #8 g_cclosure_marshal_VOID__OBJECTv at ../gobject/gmarshal.c:1910 #9 _g_closure_invoke_va at ../gobject/gclosure.c:873 #12 gtk_widget_propagate_hierarchy_changed_recurse at /usr/src/debug/gtk3-3.24.26-1.fc34.x86_64/gtk/gtkwidget.c:9995 #13 _gtk_widget_propagate_hierarchy_changed at /usr/src/debug/gtk3-3.24.26-1.fc34.x86_64/gtk/gtkwidget.c:10037 #14 gtk_widget_set_parent at /usr/src/debug/gtk3-3.24.26-1.fc34.x86_64/gtk/gtkwidget.c:9653 #15 gtk_window_set_titlebar at /usr/src/debug/gtk3-3.24.26-1.fc34.x86_64/gtk/gtkwindow.c:4234 #16 _gtk_builder_add at /usr/src/debug/gtk3-3.24.26-1.fc34.x86_64/gtk/gtkbuilder.c:906 -- You are receiving this mail because: You are on the CC list for the bug.

1 17

[Bug 2004265] New: Official name of Taiwan is wrong
by bugzilla＠redhat.com 22 Jul '24

22 Jul '24

https://bugzilla.redhat.com/show_bug.cgi?id=2004265 Bug ID: 2004265 Summary: Official name of Taiwan is wrong Product: Fedora Version: 35 Hardware: All Status: NEW Component: iso-codes Assignee: pnemade(a)redhat.com Reporter: julian.g(a)posteo.de QA Contact: extras-qa(a)fedoraproject.org CC: caillon+fedoraproject(a)gmail.com, gnome-sig(a)lists.fedoraproject.org, i18n-bugs(a)lists.fedoraproject.org, mclasen(a)redhat.com, pnemade(a)redhat.com, rhughes(a)redhat.com, rstrode(a)redhat.com, sandmann(a)redhat.com Target Milestone: --- Classification: Fedora Description of problem: The "official name" of the country on Taiwan is wrong. It states "Province of China", which is obviously not its official name. No country would call itself "Province" of another country. The official name is "Republic of China". Some sources: - Official government website https://www.taiwan.gov.tw by the RoC Ministry of Foreign Affairs - You can ask any person living on the Island. - As an IT person, you might have some hardware labeled "Made in RoC". - The Hong Kong and the Taiwanese locale both have "中華民國" as a translation, which means "Republic of China". -- You are receiving this mail because: You are on the CC list for the bug. https://bugzilla.redhat.com/show_bug.cgi?id=2004265

1 33

[Bug 2076596] New: The KDE ibus panel does not work as expected.
by bugzilla＠redhat.com 29 May '24

29 May '24

https://bugzilla.redhat.com/show_bug.cgi?id=2076596 Bug ID: 2076596 Summary: The KDE ibus panel does not work as expected. Product: Fedora Version: 36 Status: NEW Component: ibus Assignee: tfujiwar(a)redhat.com Reporter: lruzicka(a)redhat.com QA Contact: extras-qa(a)fedoraproject.org CC: i18n-bugs(a)lists.fedoraproject.org, shawn.p.huang(a)gmail.com, tfujiwar(a)redhat.com Target Milestone: --- Classification: Fedora Created attachment 1873514 --> https://bugzilla.redhat.com/attachment.cgi?id=1873514&action=edit The ibus panel with incorrect layout. Description of problem: I have freshly installed KDE Live 20220418 and made following settings during the installation: * System language is English. * Keyboard layout is Czech. After the installation, the keyboard is correctly laid out to "czech" and uses the correct czech mappings. When I check for the system settings using `localectl status`, I get the same result: === System Locale: LANG=en_US.UTF-8 VC Keymap: cz X11 Layout: cz === However, when I log into the KDE session, the IBUS-panel shows incorrectly "EN", but the layout is not English and even when I specifically select it using the panel, it does not have any influence. Also, when I use the panel to add other languages, it does not affect the system layout which is used for the KDE session, as well as for applications (kwrite, konsole), which remains "czech" all the time. Version-Release number of selected component (if applicable): ibus-1.5.26-3 KDE Plasma 5.24.4 How reproducible: Always Steps to Reproduce: 1. Install KDE Live with non-english layout (as the only one) 2. Log into the newly installed session. 3. See if ibus-panel shows the correct layout. 4. Try using ibus-panel to modify keyboard layout in the KDE session. Actual results: ibus-panel cannot modify keyboard layout Expected results: ibus-panel should be able to modify keyboard layout or should not be the default method to do so. Additional info: See screenshot -- You are receiving this mail because: You are on the CC list for the bug. https://bugzilla.redhat.com/show_bug.cgi?id=2076596

1 41

[Bug 2095164] New: Conversion region of ibus-anthy is invisible in konsole, kwrite, kate
by bugzilla＠redhat.com 21 May '24

21 May '24

https://bugzilla.redhat.com/show_bug.cgi?id=2095164 Bug ID: 2095164 Summary: Conversion region of ibus-anthy is invisible in konsole, kwrite, kate Product: Fedora Version: 36 Status: NEW Component: ibus Assignee: tfujiwar(a)redhat.com Reporter: mfabian(a)redhat.com QA Contact: extras-qa(a)fedoraproject.org CC: i18n-bugs(a)lists.fedoraproject.org, shawn.p.huang(a)gmail.com, tfujiwar(a)redhat.com Target Milestone: --- Classification: Fedora Created attachment 1888253 --> https://bugzilla.redhat.com/attachment.cgi?id=1888253&action=edit Video showing the the conversion region is visible in some places but invisible in konsole, kwrite, kate Using Fedora-Workstation-Live-x86_64-36-1.2.iso installed in qemu-kvm with all current updates. kwrite, kate, and konsole, do not show the conversion region when using ibus-anthy konsole5-22.04.1-1.fc36.x86_64 kwrite-22.04.1-1.fc36.x86_64 kate-21.12.2-1.fc36.x86_64 It does not matter whether these programs are used in Plasma(X11), Plasma(Wayland), Gnome(Xorg), Gnome(Wayland), the behaviour is always the same, the conversion region is never visible. In konsole the behaviour is even worse because not even the cursor is shown at the start of the conversion region. When testing in Plasma(Wayland) or Plasma(X11) and typing with ibus-anthy into the search field of the KDE control center, the conversion region is coloured and thus visible. It is also visible when typing into the entry field for a command which opens with Alt+F2. So there are only some programs in KDE where it does not work like konsole, kwrite, kate, ... whereas it works in other places. See the attached video. -- You are receiving this mail because: You are on the CC list for the bug. https://bugzilla.redhat.com/show_bug.cgi?id=2095164

1 14

[Bug 2090204] New: [abrt] ibus: __strndup(): ibus-extension-gtk3 killed by SIGSEGV
by bugzilla＠redhat.com 21 May '24

21 May '24

https://bugzilla.redhat.com/show_bug.cgi?id=2090204 Bug ID: 2090204 Summary: [abrt] ibus: __strndup(): ibus-extension-gtk3 killed by SIGSEGV Product: Fedora Version: 36 Hardware: x86_64 Status: NEW Whiteboard: abrt_hash:8c2b2d109d6c6600cfdf1e41632f3398d6d21e15;VAR IANT_ID=workstation; Component: ibus Assignee: tfujiwar(a)redhat.com Reporter: mfabian(a)redhat.com QA Contact: extras-qa(a)fedoraproject.org CC: i18n-bugs(a)lists.fedoraproject.org, shawn.p.huang(a)gmail.com, tfujiwar(a)redhat.com Target Milestone: --- Classification: Fedora Description of problem: Version-Release number of selected component: ibus-1.5.26-6.fc36 Additional info: reporter: libreport-2.17.1 backtrace_rating: 4 cgroup: 0::/user.slice/user-1000.slice/user@1000.service/session.slice/org.freedesktop.IBus.session.GNOME.service cmdline: /usr/libexec/ibus-extension-gtk3 crash_function: __strndup dso_list: /usr/libexec/ibus-extension-gtk3 ibus-1.5.26-6.fc36.x86_64 (Fedora Project) 1653401127 executable: /usr/libexec/ibus-extension-gtk3 journald_cursor: s=3da4198b50ed40bb8e39aac19c44f062;i=15b44;b=4f87f45459b64f7299ca0a57d8a15df6;m=51ec68d6;t=5dfc2daddfca9;x=e27b7bc9d78e7740 kernel: 5.17.9-300.fc36.x86_64 rootdir: / runlevel: N 5 type: CCpp uid: 1000 -- You are receiving this mail because: You are on the CC list for the bug. https://bugzilla.redhat.com/show_bug.cgi?id=2090204

1 6

[Bug 2070187] New: please branch ibus-kkc for epel9
by bugzilla＠redhat.com 21 May '24

21 May '24

https://bugzilla.redhat.com/show_bug.cgi?id=2070187 Bug ID: 2070187 Summary: please branch ibus-kkc for epel9 Product: Fedora Version: rawhide Status: NEW Component: ibus-kkc Assignee: dueno(a)redhat.com Reporter: petersen(a)redhat.com QA Contact: extras-qa(a)fedoraproject.org CC: dueno(a)redhat.com, i18n-bugs(a)lists.fedoraproject.org Target Milestone: --- Classification: Fedora Description of problem: I would like to have ibus-kkc with libkkc in epel9 and would be happy to help build it if you like. Could you please request an epel9 branch? If you don't mind to make me comaintainer that would be fine too. (libkkc got orphaned during the F35 cycle, I think so I was able to branch that already.) Thanks -- You are receiving this mail because: You are on the CC list for the bug. https://bugzilla.redhat.com/show_bug.cgi?id=2070187

1 5

[Fedora-i18n-bugs] [Bug 1897782] New: ibus pinyin input with special characters like '/' will repeat itself non-stop and cause strange behaviours with background applications
by bugzilla＠redhat.com 21 May '24

21 May '24

https://bugzilla.redhat.com/show_bug.cgi?id=1897782 Bug ID: 1897782 Summary: ibus pinyin input with special characters like '/' will repeat itself non-stop and cause strange behaviours with background applications Product: Fedora Version: 33 Status: NEW Component: ibus-libpinyin Assignee: pwu(a)redhat.com Reporter: yemoran-2020(a)outlook.com QA Contact: extras-qa(a)fedoraproject.org CC: i18n-bugs(a)lists.fedoraproject.org, petersen(a)redhat.com, pwu(a)redhat.com Target Milestone: --- Classification: Fedora Description of problem: In Fedora 33 Workstation, with a Chinese system language, when I try to input with the ibus input (intelligent pinyin), and I pressed the slash key'/', then the slash character '/' will automatically keep repeating itself, even if I only pressed the slash key '/' once. Not only this caused unwanted '/' to spam, but: 1. Also prevents me from pressing alphabetical characters to use pinyin input normally, unless I delete all my remaining characters to exit pinyin prompt and start over; 2. Can possibly delete my already-saved text, in combination with <Ctrl-Backspace>. It seems that I have completely lost control within the pinyin prompt. I have met with other surprising conditions, though cannot be immediately reproduced now, but I believe more combinations of inputs triggering different bugs will be confirmed later. Version-Release number of selected component (if applicable): Any kind of version. I also tested with Fedora 32 Workstation, still have this bug. How reproducible: Always Steps to Reproduce: 1. Fetch any Fedora Workstation version, be it 32 or 33 or any updates applied. 2. Add Chinese input method 'Intelligent Pinyin' and switch to it 3. In GNOME(Wayland), open any GTK-based application, be it Firefox, GNOME Terminal, gedit, Libreoffice, ... (take gedit as an example) 4. Input 你好，今天天气 (keypress: nihao<1>，jintian<1>) as a start up example, confirm input use number key '1'. or keys like <Enter> or <Space>. 5. Input 怎么样/ (keypress: zenmy/）. Do not confirm immediately after 'zenmy', but press '/' exactly once. 6. The '/' character is repeating itself within several hundred milliseconds. 7. Press <Ctrl-Backspace>. gedit will highlight "你好，今天天气" (with a lot of trailing '/'). 8. Press <Backspace> to delete these Chinese characters. Actual results: Not only '/' is repeating itself, but also I lost control to gedit and gedit thinks you want to press '/' forever or even wants to delete my already-confirmed characters before this input. Expected results: 1. '/' Should not trigger anything, unless I have pressed this key and did not release this key press (but I always release keys) 2. '/' Should not make me lost control over pinyin prompt to gedit 3. <Backspace> Should only delete pinyin alphabets in pinyin prompt panel, and should not do anything to the background gedit texts, unless I have exited the pinyin prompt panel (because I confirmed my input or have deleted every pinyin alphabet in it) Additional info: 1. I did not found this bug on Debian buster or Arch with latest updates. Additionally, '/' did not even input a single character '/' in these distributions, but I cannot confirm if this is the expected behaviour. In Fedora 33 KDE, '/' did input a single character '/', but immediately stopped. 2. I didn't find this behaviour in qt-based applications (like Fedora Image Writer or Octave) in GNOME, or any application in other desktop environments (including KDE, or even GTK-based Cinnamon Desktop). This bug seems to only occur on GTK-based applications on GNOME. 3. I can be very sure that this is not caused by something wrong with my specific keyboard, because (a) Other distributions worked very well (b) Other Fedora spins worked very well (c) Qt-based applications in GNOME worked very well (d) GNOME X11 session worked very well (e) I replicated this bug on a fresh install of Fedora 32 Workstation in another laptop of mine. 4. I guess other special characters (or keys) like '[', ']', '\', '<Esc>', '<Backspace>', etc. may trigger similar bugs, but I cannot confirm. '/' will surely trigger this. ',' and '.' are used in pinyin input method to flip candidate characters pages, so they doesn't trigger this bug. ' does not trigger this bug (used in xi'an for 西安) -- You are receiving this mail because: You are on the CC list for the bug.

1 14

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

i18n-bugs June 2022