So, this problem is still causing me unable to install/build any replica servers.

Eric


-----Original Message-----

Date: Tue, 13 Jun 2017 12:11:57 -0400
Subject: Re: [Freeipa-users] Re: replication problem
Cc: Mark Reynolds <mareynol@redhat.com>, Rob Crittenden <rcritten@redhat.com>
To: Rob Crittenden via FreeIPA-users <freeipa-users@lists.fedorahosted.org>
From: Eric Renfro <psi-jack@linux-help.org>
In my particular case, I'm not using the client installation prior to the replica installation. Though I have tried that method as well, resulting in the very same issues regardless.

I'm using this to do the installation currently:

ipa-replica-install --unattended \
--no-ntp --mkhomedir --skip-conncheck \
--ip-address ip.ad.re.ss \
--principal admin \
--admin-password "redacted" \
--server ipa1.home.ld \
--domain home.ld \
--realm HOME.LD

I'm going to try once again with the client install (that part works), then promoting that to a replica, using kinit to gain admin privileges and thus omitting the principal, admin-password, domain and realm options to the replica-install command.

Eric


-----Original Message-----

Date: Tue, 13 Jun 2017 11:55:26 -0400
Subject: [Freeipa-users] Re: replication problem
Cc: Eric Renfro <psi-jack@linux-help.org>, Mark Reynolds <mareynol@redhat.com>, Rob Crittenden <rcritten@redhat.com>
To: FreeIPA users list <freeipa-users@lists.fedorahosted.org>
Reply-to: FreeIPA users list <freeipa-users@lists.fedorahosted.org>
From: Rob Crittenden via FreeIPA-users <freeipa-users@lists.fedorahosted.org>
Eric Renfro via FreeIPA-users wrote:
Hmmm.. Well, in my case specifically, the failed ipa-replica-install does in fact have the nsslapd-rootpw entry, however, changing this in a recovery process does no good during an ipa-replica-install.
I think this is a red herring. The client promotion code happened after my time but I seem to recall that some magic happens regarding the DM password so it isn't required during the install. I'm pretty sure that a random one is set by the installer during initial configuration and at the end it is replaced by the DM password in the master it is replicating from. So in other words it is expected to not match for some of the installation. rob
Eric -----Original Message----- *Date*: Tue, 13 Jun 2017 10:51:13 -0400 *Subject*: [Freeipa-users] Re: replication problem *Cc*: Eric Renfro <psi-jack@linux-help.org <mailto:Eric%20Renfro%20%3cpsi-jack@linux-help.org%3e>>, Adrian HY <ayeja153@gmail.com <mailto:Adrian%20HY%20%3cayeja153@gmail.com%3e>>, Mark Reynolds <mareynol@redhat.com <mailto:Mark%20Reynolds%20%3cmareynol@redhat.com%3e>> *To*: FreeIPA users list <freeipa-users@lists.fedorahosted.org <mailto:FreeIPA%20users%20list%20%3cfreeipa-users@lists.fedorahosted.org%3e>> Reply-to: FreeIPA users list <freeipa-users@lists.fedorahosted.org> *From*: Mark Reynolds via FreeIPA-users <freeipa-users@lists.fedorahosted.org <mailto:Mark%20Reynolds%20via%20FreeIPA-users%20%3cfreeipa-users@lists.fedorahosted.org%3e>> On 06/13/2017 10:34 AM, Eric Renfro via FreeIPA-users wrote:
Huh.. Well, who'da thunk it. I just literally reported the same kind of trouble I was having, which looks like it matches this same situation, with the ipa-replica-install failing to initiate replication because of Invalid password, because the password for some reason does not seem to be being set.
Sorry, replication does not use the Directory Manager account. Typically some type of "replication manager" entry is used, and in IPA I'm pretty sure this account uses kerberos credentials (not a password). Going back to the Directory Manager.... To confirm if the password is set, look in /etc/dirsv/slapd-INSTANCE/dse.ldif, and under cn=config look for "nsslapd-rootpw" if this attribute is missing then it truly is not set. If your directory manager account does not have a password, or there is a password but you don't know what it is, then you can reset it following this doc: http://www.port389.org/docs/389ds/howto/howto-resetdirmgrpassword.html <http://www.port389.org/docs/389ds/howto/howto-resetdirmgrpassword.html>
Eric -----Original Message----- Date: Tue, 13 Jun 2017 09:49:40 -0400 Subject: [Freeipa-users] Re: replication problem Cc: FreeIPA users list <freeipa-users@lists.fedorahosted.org>, Adrian HY <ayeja153@gmail.com> To: Mark Reynolds <mareynol@redhat.com> Reply-to: FreeIPA users list <freeipa-users@lists.fedorahosted.org> From: Adrian HY via FreeIPA-users <freeipa-users@lists.fedorahosted.org Hi Mark, my problem is during the replica installation. I can't use ldapmodify because cn=directory manager does not have the password assigned. Regards. On Mon, Jun 12, 2017 at 1:38 PM, Mark Reynolds <mareynol@redhat.com> wrote:
On 06/11/2017 01:49 PM, Adrian HY via FreeIPA-users wrote:
I think I detected the problem. The error log in the replica writes: [11/Jun/2017:13:36:06.360241021 -0400] SASL encrypted packet length exceeds maximum allowed limit (length=2483849, limit=2097152). Change the nsslapd-maxsasliosize attribute in cn=config to increase limit. [11/Jun/2017:13:36:06.361177815 -0400] ERROR bulk import abandoned According this: (https://access.redhat.com/documentation/en-US/Red_ Hat_Directory_Server/8.2/pdf/Configuration_and_Command- Line_Tool_Reference/Red_Hat_Directory_Server-8.2- Configuration_and_Command-Line_Tool_Reference-en-US.pdf) "When an incoming SASL IO packet is larger than the nsslapd- maxsasliosize limit, the server immediately disconnects the client and logs a message to the error log, so that an administrator can adjust the setting if necessary" The problem now is how can I change the value of the attribute during replication.
You just use ldapmodify to change the value on each replica: # ldapmodify -D "cn=directory manager" -W dn: cn=config changetype: modify replace: nsslapd-maxsasliosize nsslapd-maxsasliosize: YOUR_NEW_VALUE
Regards. On Sun, Jun 11, 2017 at 2:20 AM, Adrian HY <ayeja153@gmail.com> wrote:
Hi folks, I had a problem with replication and I tried to add the slave back to the replica. The process stops in the initial replication phase. The firewall and selinux are down and both servers are synchronized with the time. Centos 7.3 Freeipa 4.4.0-14 Master error log: 11/Jun/2017:01:11:45.690402715 -0400] NSMMReplicationPlugin - agmt="cn=meTousuarios-replica.ipa.server.com" (usuarios- replica:389): Replication bind with GSSAPI auth failed: LDAP error 49 (Invalid credentials) () [11/Jun/2017:01:11:45.690877649 -0400] NSMMReplicationPlugin - Warning: unable to acquire replica for total update, error: 49, retrying in 1 seconds. [11/Jun/2017:01:11:46.966060891 -0400] NSMMReplicationPlugin - agmt="cn=meTousuarios-replica.ipa.server.com" (usuarios- replica:389): Replication bind with GSSAPI auth resumed [11/Jun/2017:01:11:47.095800971 -0400] NSMMReplicationPlugin - Beginning total update of replica "agmt="cn=meTousuarios- replica.ipa.server.com" (usuarios-replica:389)". [11/Jun/2017:01:12:06.873713837 -0400] NSMMReplicationPlugin - agmt="cn=meTousuarios-replica.ipa.server.com" (usuarios- replica:389): Failed to send extended operation: LDAP error -1 (Can't contact LDAP server) [11/Jun/2017:01:12:06.874590112 -0400] NSMMReplicationPlugin - agmt="cn=meTousuarios-replica.ipa.server.com" (usuarios- replica:389): Received error -1 (Can't contact LDAP server): for total updat e operation [11/Jun/2017:01:12:06.874950648 -0400] NSMMReplicationPlugin - agmt="cn=meTousuarios-replica.ipa.server.com" (usuarios- replica:389): Warning: unable to send endReplication extended operation (Can' t contact LDAP server) [11/Jun/2017:01:12:06.875217640 -0400] NSMMReplicationPlugin - Total update failed for replica "agmt="cn=meTousuarios- replica.ipa.server.com" (usuarios-replica:389)", error (-11) [11/Jun/2017:01:12:06.894882383 -0400] NSMMReplicationPlugin - agmt="cn=meTousuarios-replica.ipa.server.com" (usuarios- replica:389): Replication bind with GSSAPI auth resumed [11/Jun/2017:01:12:06.905304992 -0400] NSMMReplicationPlugin - agmt="cn=meTousuarios-replica.ipa.server.com" (usuarios- replica:389): The remote replica has a different database generation ID than the local database. You may have to reinitialize the remote replica, or the local replica. [11/Jun/2017:01:12:09.912282245 -0400] NSMMReplicationPlugin - agmt="cn=meTousuarios-replica.ipa.server.com" (usuarios- replica:389): The remote replica has a different database generation ID than the local database. You may have to reinitialize the remote replica, or the local replica. Client ipareplica-install.log: 2017-06-11T05:24:24Z DEBUG stderr= 2017-06-11T05:24:24Z DEBUG wait_for_open_ports: localhost [389] timeout 300 2017-06-11T05:24:24Z DEBUG Fetching nsDS5ReplicaId from master [attempt 1/5] 2017-06-11T05:24:24Z DEBUG flushing ldap://usuarios.ipa.server.com:389 from SchemaCache 2017-06-11T05:24:24Z DEBUG retrieving schema for SchemaCache url=ldap://usuarios.ipa.server.com:389 conn=<ldap.ldapobject.SimpleLDAPObject instance at 0x86909e0> 2017-06-11T05:24:24Z DEBUG Successfully updated nsDS5ReplicaId. 2017-06-11T05:24:24Z DEBUG flushing ldapi://%2fvar%2frun%2fslapd- IPA.SERVER.COM.socket from SchemaCache 2017-06-11T05:24:24Z DEBUG retrieving schema for SchemaCache url=ldapi://%2fvar%2frun%2fslapd-IPA.SERVER.COM.socket conn=<ldap.ldapobject.SimpleLDAPObject instance at 0x9e74440> 2017-06-11T05:24:46Z DEBUG Traceback (most recent call last): File "/usr/lib/python2.7/site- packages/ipaserver/install/service.py", line 449, in start_creation run_step(full_msg, method) File "/usr/lib/python2.7/site- packages/ipaserver/install/service.py", line 439, in run_step method() File "/usr/lib/python2.7/site- packages/ipaserver/install/dsinstance.py", line 416, in __setup_replica repl.setup_promote_replication(self.master_fqdn) File "/usr/lib/python2.7/site- packages/ipaserver/install/replication.py", line 1643, in setup_promote_replication raise RuntimeError("Failed to start replication") RuntimeError: Failed to start replication 2017-06-11T05:24:46Z DEBUG [error] RuntimeError: Failed to start replication 2017-06-11T05:24:46Z DEBUG Destroyed connection context.ldap2_101192976 2017-06-11T05:24:46Z DEBUG File "/usr/lib/python2.7/site- packages/ipapython/admintool.py", line 171, in execute return_value = self.run() File "/usr/lib/python2.7/site- packages/ipapython/install/cli.py", line 318, in run cfgr.run() File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 310, in run self.execute() File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 332, in execute for nothing in self._executor(): File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 372, in __runner self._handle_exception(exc_info) File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 394, in _handle_exception six.reraise(*exc_info) File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 362, in __runner step() File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 359, in <lambda> step = lambda: next(self.__gen) File "/usr/lib/python2.7/site- packages/ipapython/install/util.py", line 81, in run_generator_with_yield_from six.reraise(*exc_info) File "/usr/lib/python2.7/site- packages/ipapython/install/util.py", line 59, in run_generator_with_yield_from value = gen.send(prev_value) File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 586, in _configure next(executor) File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 372, in __runner self._handle_exception(exc_info) File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 449, in _handle_exception self.__parent._handle_exception(exc_info) File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 394, in _handle_exception six.reraise(*exc_info) File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 446, in _handle_exception super(ComponentBase, self)._handle_exception(exc_info) File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 394, in _handle_exception six.reraise(*exc_info) File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 362, in __runner step() File "/usr/lib/python2.7/site- packages/ipapython/install/core.py", line 359, in <lambda> step = lambda: next(self.__gen) File "/usr/lib/python2.7/site- packages/ipapython/install/util.py", line 81, in run_generator_with_yield_from six.reraise(*exc_info) File "/usr/lib/python2.7/site- packages/ipapython/install/util.py", line 59, in run_generator_with_yield_from value = gen.send(prev_value) File "/usr/lib/python2.7/site- packages/ipapython/install/common.py", line 63, in _install for nothing in self._installer(self.parent): File "/usr/lib/python2.7/site- packages/ipaserver/install/server/replicainstall.py", line 1722, in main promote(self) File "/usr/lib/python2.7/site- packages/ipaserver/install/server/replicainstall.py", line 372, in decorated func(installer) File "/usr/lib/python2.7/site- packages/ipaserver/install/server/replicainstall.py", line 1423, in promote promote=True, pkcs12_info=dirsrv_pkcs12_info) File "/usr/lib/python2.7/site- packages/ipaserver/install/server/replicainstall.py", line 135, in install_replica_ds api=remote_api, File "/usr/lib/python2.7/site- packages/ipaserver/install/dsinstance.py", line 401, in create_replica self.start_creation(runtime=60) File "/usr/lib/python2.7/site- packages/ipaserver/install/service.py", line 449, in start_creation run_step(full_msg, method) File "/usr/lib/python2.7/site- packages/ipaserver/install/service.py", line 439, in run_step method() File "/usr/lib/python2.7/site- packages/ipaserver/install/dsinstance.py", line 416, in __setup_replica repl.setup_promote_replication(self.master_fqdn) File "/usr/lib/python2.7/site- packages/ipaserver/install/replication.py", line 1643, in setup_promote_replication raise RuntimeError("Failed to start replication")
_______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahos ted.org
_______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted. org _______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.org
_______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.org <mailto:freeipa-users@lists.fedorahosted.org> To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.org <mailto:freeipa-users-leave@lists.fedorahosted.org> _______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.org
_______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.org