FreeIPA-users November 2024

freeipa-users@lists.fedorahosted.org

28 participants
41 discussions

Best way to upgrade FreeIpa version and OS
by Youssef CHTOUROU 27 Jul '26

27 Jul '26

Hello I've 3 FreeIpa Servers (version =4.6.8) runned on Centos 7. I'am looking for upgrade these servers like that : Centos 7 to Rocky 8 FreeIpa server to most recent version possible I would like to see your advice : what is the best / secure way to do this upgrade ? Thanks a lot

2 1

Authenticate users with yubikeys without importing the certificate in IPA does not work.
by Theodor Vallier 23 Apr '26

23 Apr '26

Hello, I'm trying to allow authentication using Yubikeys on clients without importing user's certificates in idM. I use an external PKI that signs everything, so I have the root CA and one sub CA named piv that signs users' csr (that are stored in yubikeys). On the server, the output of ipa-advise config-server-for-smart-card-auth is executed and the output of ipa-advise config-client-for-smart-card-auth is also executed on the client. I added both the certificate mapping rule and the certificate mapping data (Issuer and subject) according to red hat documentation. Steps to Reproduce: In an internet forbidden environment, using at least three VMs on RHEL9. One for IPA, one as a workstation and one that will be the DHCP, DNS and NTP server. Once the DNS and DHCP are configured, I generated a root CA and two sub CAs, one for signing users csr (piv) and one for signing everything else (like ipa). Once ipa is installed with an external ca, I executed the output of ipa-advise config-server-for-smart-card-auth to load and configure ipa for smartcard. Then I added the Certificate Identity Mapping Rule: Mapping rule: (ipacertmapdata=X509:<I\>{issuer\_dn!nss\_x500}<S>{subject_dn!nss_x500}) Matching rule: <ISSUER>CN=piv,C=FR Once the client is registered in ipa, I executed the output of ipa-advise config-client-for-smart-card-auth to load and configure the client for smartcard. Then, I registered a new user, with pkinit enable and I created a Certificate mapping data for him with the good Subject and the same Issuer as the Certificate Identity Mapping Rule. Finally, I set up the yubikey for the corresponding user using the PKI and signed his certificate with the piv CA. Actual behavior: If the user certificate is not present in ipa, I'm prompted to enter the PIN CODE (the Yubikey is recognized and the user is automatically selected), but then I have the error "Sorry, smart card authentication didn't work, please try again". On ipa server, if I use the command ipa certmap-match <user-certificate>, no users are found. Furthermore, in sssd I can see that the server is trying to find a user with the certificate stored on the yubikey instead of trying to check if the certificate is valid and signed by the piv sub CA. Expected behavior: I would expect to be logged in. Version/Release/Distribution: ipa-server-4.10.1-9.el9_2.x86_64 ipa-client-4.10.1-9.el9_2.x86_64 389-ds-base-2.2.4-5.el9_2.x86_64 krb5-server-1.20.1-9.el9_2.x86_64 sssd-2.8.2-3.el9_2.x86_64 Additional info: I can provide more logs if necessary but don't know which ones you could want. Thanks Whidix

3 4

DNSSEC - File.cpp(94): Could not open the file
by lejeczek 18 Dec '25

18 Dec '25

Hi guys When I sign a zone I get lots of: ... File.cpp(94): Could not open the file (Permission denied): /var/lib/ipa/dnssec/tokens/4ee2f633-3b2a-ef03-6909-473386d17234/26365760-a70d-19be-2db1-a80adc796477.object File.cpp(94): Could not open the file (Permission denied): /var/lib/ipa/dnssec/tokens/4ee2f633-3b2a-ef03-6909-473386d17234/9776a26e-2ad9-1b46-b65c-11265eee7fbd.object File.cpp(94): Could not open the file (Permission denied): /var/lib/ipa/dnssec/tokens/4ee2f633-3b2a-ef03-6909-473386d17234/9776a26e-2ad9-1b46-b65c-11265eee7fbd.object zone private.road/IN (signed): sending notifies (serial 1642004083) client @0x7f8f7c1948b8 10.3.1.99#39887: received notify for zone 'private.road' Are those a reason to worry & investigate? If not then what do they translate to? many thanks, L

3 5

Problem with "Login failed due to an unknown reason" / PKINIT OpenSSL error
by Ville Teronen 06 Nov '25

06 Nov '25

Hello, We are currently experiencing strange behavior on FreeIPA system related to PKINIT OpenSSL error when trying to log in through FreeIPA web gui. This started happening as we upgraded our second replica with "dnf ugprade". Freeipa packages in themself haven't been updated. Our setup is basically as follows. ipa.tre-1.web1.fi ipa.tku-2.web1.fi <-- the one not working. GUI throws an error "Login failed due to an unknown reason" httpd error log has the following line after error: [Fri Feb 25 19:32:50.776457 2022] [wsgi:error] [pid 17977:tid 18319] [remote 10.20.11.2:49472] ipapython.ipautil.CalledProcessError: CalledProcessError(Command ['/usr/bin/kinit', '-n', '-c', '/run/ipa/ccaches/armor_17977', '-X', 'X509_anchors=FILE:/var/kerberos/krb5kdc/kdc.crt', '-X', 'X509_anchors=FILE:/var/lib/ipa-client/pki/kdc-ca-bundle.pem'] returned non-zero exit status 1: 'kinit: Cannot read password while getting initial credentials\\n') Now if I try to run " KRB5_TRACE=/dev/stdout /usr/bin/kinit -n -c /var/run/ipa/ccaches/armor_15581 -X X509_anchors=FILE:/var/kerberos/krb5kdc/kdc.crt -X X509_anchors=FILE:/var/lib/ipa-client/pki/kdc-ca-bundle.pem" I get the following output [19260] 1645812760.557398: Getting initial credentials for WELLKNOWN/ANONYMOUS(a)IPA.WEB1.FI [19260] 1645812760.557400: Sending unauthenticated request [19260] 1645812760.557401: Sending request (186 bytes) to IPA.WEB1.FI [19260] 1645812760.557402: Initiating TCP connection to stream 10.20.13.5:88 [19260] 1645812760.557403: Sending TCP request to stream 10.20.13.5:88 [19260] 1645812760.557404: Received answer (538 bytes) from stream 10.20.13.5:88 [19260] 1645812760.557405: Terminating TCP connection to stream 10.20.13.5:88 [19260] 1645812760.557406: Response was from primary KDC [19260] 1645812760.557407: Received error from KDC: -1765328359/Additional pre-authentication required [19260] 1645812760.557410: Preauthenticating using KDC method data [19260] 1645812760.557411: Processing preauth types: PA-PK-AS-REQ (16), PA-FX-FAST (136), PA-ETYPE-INFO2 (19), PA-PKINIT-KX (147), PA-SPAKE (151), PA-ENC-TIMESTAMP (2), PA_AS_FRESHNESS (150), PA-FX-COOKIE (133) [19260] 1645812760.557412: Selected etype info: etype aes256-cts, salt "IPA.WEB1.FIWELLKNOWNANONYMOUS", params "" [19260] 1645812760.557413: Received cookie: MIT1\x00\x00\x00\x01\x8f\xcb\x99\x9c~\xed!^Qj\xa3\x0a\x82~\xe94\x04\x0ck[j=\x08\xd2\x97j'K2\x8f\xa0\xf6\xc3\x89Z@\x8b]\xc3K\xc2h\xfa\xaek\x11\x91y\xc9\xf0\xadG\x13\x9a\xb2\xb6\x1c\x12\xbfr\x0a'Z\xfe\x12\x81\x1a>2\x8c\x1a\xf2\x96\xdc]&qH\x08\x1f\x0d\xc0a{\xe8\xff\xbbF\x9c\x86`\xd6G\xc4*5\xccL\xc1m\xc0\xa7b\x8b]od\xfa*\xd4.bmB\x9d\x92\xb7\xf9($\xa4D\xea\xcd\xc6\xe3p\xac$\xf4 [19260] 1645812760.557414: Preauth module pkinit (147) (info) returned: 0/Success [19260] 1645812760.557415: PKINIT client received freshness token from KDC [19260] 1645812760.557416: Preauth module pkinit (150) (info) returned: 0/Success [19260] 1645812760.557417: PKINIT loading CA certs and CRLs from FILE [19260] 1645812760.557418: PKINIT loading CA certs and CRLs from FILE [19260] 1645812760.557419: PKINIT loading CA certs and CRLs from FILE [19260] 1645812760.557420: PKINIT client computed kdc-req-body checksum 9/B79768B0DAD630709ABFE35C1E2B6FDAB714913D [19260] 1645812760.557422: PKINIT client making DH request [19260] 1645812760.557423: Preauth module pkinit (16) (real) returned: 0/Success [19260] 1645812760.557424: Produced preauth for next request: PA-FX-COOKIE (133), PA-PK-AS-REQ (16) [19260] 1645812760.557425: Sending request (1674 bytes) to IPA.WEB1.FI [19260] 1645812760.557426: Initiating TCP connection to stream 10.20.13.5:88 [19260] 1645812760.557427: Sending TCP request to stream 10.20.13.5:88 [19260] 1645812760.557428: Received answer (2619 bytes) from stream 10.20.13.5:88 [19260] 1645812760.557429: Terminating TCP connection to stream 10.20.13.5:88 [19260] 1645812760.557430: Response was from primary KDC [19260] 1645812760.557431: Processing preauth types: PA-PK-AS-REP (17), PA-PKINIT-KX (147) [19260] 1645812760.557432: Preauth module pkinit (147) (info) returned: 0/Success [19260] 1645812760.557433: PKINIT OpenSSL error: Failed to verify CMS message [19260] 1645812760.557434: PKINIT OpenSSL error: error:1700006B:CMS routines::content type not enveloped data [19260] 1645812760.557435: PKINIT OpenSSL error: error:03000098:digital envelope routines::invalid digest [19260] 1645812760.557436: PKINIT client could not verify DH reply [19260] 1645812760.557437: Preauth module pkinit (17) (real) returned: -1765328320/Failed to verify CMS message: content type not enveloped data [19260] 1645812760.557438: Produced preauth for next request: (empty) [19260] 1645812760.557439: Getting AS key, salt "IPA.WEB1.FIWELLKNOWNANONYMOUS", params "" Password for WELLKNOWN/ANONYMOUS(a)IPA.WEB1.FI: [19260] 1645812776.928337: AS key obtained from gak_fct: aes256-cts/3840 kinit: Password incorrect while getting initial credentials But this only happens on the "dc2" one. If I would run this on the "dc1" it would work just fine. I have tried running ipa-pkinit-manage disable ipa-pkinit-manage enable to regen the cert but it didn't help. Any suggestions / pointers at why the OpenSSL error on the tku-2 is showing up.

6 11

IPA DNS ACL (respond with a different IP depending on the requester)
by Daniel PC 24 Oct '25

24 Oct '25

I would like to configure DNS to respond with a different IP depending on the requester source IP. Bind allow it using ACL. Do you know if it is possible to implement this feature on IPA integrated DNS? thank you

3 4

Error upgrading to version 4.11.0
by Luis Correia 19 Oct '25

19 Oct '25

Hello all. I'm currently running a FreeIPA server on Docker using the rocky-9-4.10.2 and trying to upgrade my installation to version rocky-9-4.11.0, but currently getting this error: 2024-08-28T09:21:52Z DEBUG Failed to check CA status: cannot connect to 'http://<my-freeipa-hostname>:8080/ca/admin/ca/getStatus': [Errno 111] Connection refused 2024-08-28T09:22:38Z ERROR IPA server upgrade failed: Inspect /var/log/ipaupgrade.log and run command ipa-server-upgrade manually. 2024-08-28T09:22:38Z DEBUG File "/usr/lib/python3.9/site-packages/ipapython/admintool.py", line 180, in execute return_value = self.run() File "/usr/lib/python3.9/site-packages/ipaserver/install/ipa_server_upgrade.py", line 54, in run server.upgrade() File "/usr/lib/python3.9/site-packages/ipaserver/install/server/upgrade.py", line 2081, in upgrade upgrade_configuration() File "/usr/lib/python3.9/site-packages/ipaserver/install/server/upgrade.py", line 1803, in upgrade_configuration ca.start('pki-tomcat') File "/usr/lib/python3.9/site-packages/ipaserver/install/service.py", line 575, in start self.service.start(instance_name, capture_output=capture_output, wait=wait) File "/usr/lib/python3.9/site-packages/ipaplatform/base/services.py", line 304, in start ipautil.run([paths.SYSTEMCTL, "start", File "/usr/lib/python3.9/site-packages/ipapython/ipautil.py", line 599, in run raise CalledProcessError( 2024-08-28T09:22:38Z DEBUG The ipa-server-upgrade command failed, exception: CalledProcessError: CalledProcessError(Command ['/bin/systemctl', 'start', 'pki-tomcatd(a)pki-tomcat.service'] returned non-zero exit status 1: 'Job for pki-tomcatd(a)pki-tomcat.service canceled.\n') 2024-08-28T09:22:38Z ERROR Unexpected error - see /var/log/ipaupgrade.log for details: CalledProcessError: CalledProcessError(Command ['/bin/systemctl', 'start', 'pki-tomcatd(a)pki-tomcat.service'] returned non-zero exit status 1: 'Job for pki-tomcatd(a)pki-tomcat.service canceled.\n') 2024-08-28T09:22:38Z ERROR The ipa-server-upgrade command failed. See /var/log/ipaupgrade.log for more information The endpoint that FreeIPA tries to connect to eventually generates a 404 error (logs from var/log/pki/pki-tomcat/localhost_access_log.2024-08-28.txt): 172.18.0.2 - - [28/Aug/2024:09:22:33 +0000] "GET /ca/admin/ca/getStatus HTTP/1.1" 404 784 172.18.0.2 - - [28/Aug/2024:09:22:34 +0000] "GET /ca/admin/ca/getStatus HTTP/1.1" 404 784 172.18.0.2 - - [28/Aug/2024:09:22:35 +0000] "GET /ca/admin/ca/getStatus HTTP/1.1" 404 784 172.18.0.2 - - [28/Aug/2024:09:22:36 +0000] "GET /ca/admin/ca/getStatus HTTP/1.1" 404 784 172.18.0.2 - - [28/Aug/2024:09:22:37 +0000] "GET /ca/admin/ca/getStatus HTTP/1.1" 404 784 172.18.0.2 - - [28/Aug/2024:09:22:38 +0000] "GET /ca/admin/ca/getStatus HTTP/1.1" 404 784 Can anyone help? This makes it so that I'm completely unable to update FreeIPA to the latest version, which I currently need to do. Thanks!

5 9

Unable to delete ID range
by Jeremy Tourville 14 Oct '25

14 Oct '25

We are running IPA server 4.9.11 We previously had a domain trust established with AD. Presently, the trust has been removed and we are trying to remove / clean up the ID range for AD. When doing so, using the command ipa idrange-del <range_name>, we get the error: "ipa: ERROR: invalid 'ipabaseid,ipaidrangesize': range modification leaving objects with ID out of the defined range is not allowed" Any suggestions to troubleshoot and remove this range?

5 9

Crashes in bind9 name.c:667: REQUIRE((name1->attributes & 0x00000001) == (name2->attributes & 0x00000001))
by Kees Bakker 26 Jun '25

26 Jun '25

Hi, After a scheduled power down on and power up on one of our IPA servers named crashed. I remember I saw this before and that it was "solved" by restarting named. This time however it took about 12 retries before named finally continued. This is the error it produces ../../../lib/dns/name.c:667: REQUIRE((name1->attributes & 0x00000001) == (name2->attributes & 0x00000001)) failed, back trace bind9 is quite drastic when it hits a failing REQUIRE. It immediately stops with a coredump. But it doesn't tell which names are failing the comparison. Of course I can (or should) report this to the bind developers. However, I'm sure they are going to say that this is an old version and that I should ask CentOS/RH devs. If anybody here on the list has an idea, then please let me know. Some more details Version info: * os: CentOS 9-Stream * ipa packages 4.12.0-4.el9 * bind9 packages 32:9.16.23-15.el9 * bind-libdyndb-ldap 11.9.8-el9 Stack trace: Stack trace of thread 6432: #0 0x00007fb5a348b94c __pthread_kill_implementation (libc.so.6 + 0x8b94c) #1 0x00007fb5a343e646 raise (libc.so.6 + 0x3e646) #2 0x00007fb5a34287f3 abort (libc.so.6 + 0x287f3) #3 0x00005570cbbea5b5 assertion_failed.cold (named + 0x1c5b5) #4 0x00007fb5a433d420 isc_assertion_failed (libisc-9.16.23-RH.so + 0x1c420) #5 0x00007fb5a409f9ca dns_name_equal (libdns-9.16.23-RH.so + 0x9f9ca) #6 0x00007fb5a40b48ec dns_order_find (libdns-9.16.23-RH.so + 0xb48ec) #7 0x00007fb5a4429de8 query_addrrset.lto_priv.0 (libns-9.16.23-RH.so + 0x1dde8) #8 0x00007fb5a442eece query_gotanswer (libns-9.16.23-RH.so + 0x22ece) #9 0x00007fb5a4432b8b fetch_callback (libns-9.16.23-RH.so + 0x26b8b) #10 0x00007fb5a43781bd isc_task_run (libisc-9.16.23-RH.so + 0x571bd) #11 0x00007fb5a43632a9 process_netievent (libisc-9.16.23-RH.so + 0x422a9) #12 0x00007fb5a4363425 process_queue (libisc-9.16.23-RH.so + 0x42425) #13 0x00007fb5a4363c17 async_cb (libisc-9.16.23-RH.so + 0x42c17) #14 0x00007fb5a4285afd uv__async_io.part.0 (libuv.so.1 + 0xaafd) #15 0x00007fb5a42a185e uv__io_poll.part.0 (libuv.so.1 + 0x2685e) #16 0x00007fb5a428b568 uv_run (libuv.so.1 + 0x10568) #17 0x00007fb5a43634db nm_thread (libisc-9.16.23-RH.so + 0x424db) #18 0x00007fb5a4375f9a isc__trampoline_run (libisc-9.16.23-RH.so + 0x54f9a) #19 0x00007fb5a3489c02 start_thread (libc.so.6 + 0x89c02) #20 0x00007fb5a350ec40 __clone3 (libc.so.6 + 0x10ec40) -- Kees

4 7

ipa-replica-install -- cannot get past [26/41]: creating DS keytab
by Jonathon Jenkins 10 Jun '25

10 Jun '25

Greetings, I cannot get the ipa-replica-install to proceed past step 26/41 - creating DS keytab. I see the command that is to be run, and I can run that just fine before and after the ipa-replica-install command, and it creates the keytab. I am not sure how to proceed from here - the bug reports I see all pertain to earlier versions, and my files reflect those changes. I have also tried running this with all manner of password flags, which are correct, but still getting insufficient access rights. particulars: centos 7 3.10.0-957.1.3.el7.x86_64 ipa-server-4.6.4-10.el7.centos.x86_64 ipa-common-4.6.4-10.el7.centos.noarch ipa-server-common-4.6.4-10.el7.centos.noarch ipa-client-4.6.4-10.el7.centos.x86_64 ipa-server-dns-4.6.4-10.el7.centos.noarch ipa-client-common-4.6.4-10.el7.centos.noarch * Note: anonymized output below ipapython.ipautil: DEBUG stderr= ipalib.backend: DEBUG Created connection context.ldap2_139891568509776 ipaserver.install.service: DEBUG duration: 7 seconds ipaserver.install.service: DEBUG [26/41]: creating DS keytab [26/41]: creating DS keytab ipalib.frontend: DEBUG raw: service_add(u'ldap/<ipa-replica-host>@<domain>.NET', force=True, version=u'2.229') ipalib.frontend: DEBUG service_add(ipapython.kerberos.Principal('ldap/<ipa-replica-host>@<domain>.NET'), force=True, all=False, raw=False, version=u'2.229', no_members=False) ipalib.frontend: DEBUG raw: host_show(u'<ipa-replica-host>', version=u'2.229') ipalib.frontend: DEBUG host_show(u'<ipa-replica-host>', rights=False, all=False, raw=False, version=u'2.229', no_members=False) ipalib.install.sysrestore: DEBUG Backing up system configuration file '/etc/dirsrv/ds.keytab' ipalib.install.sysrestore: DEBUG -> Not backing up - '/etc/dirsrv/ds.keytab' doesn't exist ipapython.ipautil: DEBUG Starting external process ipapython.ipautil: DEBUG args=/usr/sbin/ipa-getkeytab -k /etc/dirsrv/ds.keytab -p ldap/<ipa-replica-host>@<domain>.NET -H ldaps://<ipa-replica-master> ipapython.ipautil: DEBUG Process finished, return code=9 ipapython.ipautil: DEBUG stdout= ipapython.ipautil: DEBUG stderr=Failed to parse result: Insufficient access rights Retrying with pre-4.0 keytab retrieval method... Failed to parse result: Insufficient access rights Failed to get keytab! Failed to get keytab ipaserver.install.service: DEBUG Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 570, in start_creation run_step(full_msg, method) File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 560, in run_step method() File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 1308, in request_service_keytab super(DsInstance, self).request_service_keytab() File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 742, in request_service_keytab self.run_getkeytab(self.api.env.ldap_uri, self.keytab, self.principal) File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 732, in run_getkeytab ipautil.run(args, nolog=nolog) File "/usr/lib/python2.7/site-packages/ipapython/ipautil.py", line 562, in run raise CalledProcessError(p.returncode, arg_string, str(output)) CalledProcessError: Command '/usr/sbin/ipa-getkeytab -k /etc/dirsrv/ds.keytab -p ldap/<ipa-replica-host>@<domain>.NET -H ldaps://<ipa-replica-master>' returned non-zero exit status 9 ipaserver.install.service: DEBUG [error] CalledProcessError: Command '/usr/sbin/ipa-getkeytab -k /etc/dirsrv/ds.keytab -p ldap/<ipa-replica-host>@<domain>.NET -H ldaps://<ipa-replica-master>' returned non-zero exit status 9 [error] CalledProcessError: Command '/usr/sbin/ipa-getkeytab -k /etc/dirsrv/ds.keytab -p ldap/<ipa-replica-host>@<domain>.NET -H ldaps://<ipa-replica-master>' returned non-zero exit status 9 ipalib.backend: DEBUG Destroyed connection context.ldap2_139891548583120 ipalib.install.sysrestore: DEBUG Backing up system configuration file '/etc/ipa/default.conf' ipalib.install.sysrestore: DEBUG Saving Index File to '/var/lib/ipa/sysrestore/sysrestore.index' Your system may be partly configured. Run /usr/sbin/ipa-server-install --uninstall to clean up. ipapython.admintool: DEBUG File "/usr/lib/python2.7/site-packages/ipapython/admintool.py", line 178, in execute return_value = self.run() File "/usr/lib/python2.7/site-packages/ipapython/install/cli.py", line 319, in run return cfgr.run() File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 364, in run return self.execute() File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 389, in execute for rval in self._executor(): File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 434, in __runner exc_handler(exc_info) File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 463, in _handle_execute_exception self._handle_exception(exc_info) File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 453, in _handle_exception six.reraise(*exc_info) File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 424, in __runner step() File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 421, in <lambda> step = lambda: next(self.__gen) File "/usr/lib/python2.7/site-packages/ipapython/install/util.py", line 81, in run_generator_with_yield_from six.reraise(*exc_info) File "/usr/lib/python2.7/site-packages/ipapython/install/util.py", line 59, in run_generator_with_yield_from value = gen.send(prev_value) File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 658, in _configure next(executor) File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 434, in __runner exc_handler(exc_info) File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 463, in _handle_execute_exception self._handle_exception(exc_info) File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 521, in _handle_exception self.__parent._handle_exception(exc_info) File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 453, in _handle_exception six.reraise(*exc_info) File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 518, in _handle_exception super(ComponentBase, self)._handle_exception(exc_info) File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 453, in _handle_exception six.reraise(*exc_info) File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 424, in __runner step() File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 421, in <lambda> step = lambda: next(self.__gen) File "/usr/lib/python2.7/site-packages/ipapython/install/util.py", line 81, in run_generator_with_yield_from six.reraise(*exc_info) File "/usr/lib/python2.7/site-packages/ipapython/install/util.py", line 59, in run_generator_with_yield_from value = gen.send(prev_value) File "/usr/lib/python2.7/site-packages/ipapython/install/common.py", line 65, in _install for unused in self._installer(self.parent): File "/usr/lib/python2.7/site-packages/ipaserver/install/server/__init__.py", line 622, in main replica_install(self) File "/usr/lib/python2.7/site-packages/ipaserver/install/server/replicainstall.py", line 406, in decorated func(installer) File "/usr/lib/python2.7/site-packages/ipaserver/install/server/replicainstall.py", line 1431, in install fstore=fstore) File "/usr/lib/python2.7/site-packages/ipaserver/install/server/replicainstall.py", line 113, in install_replica_ds setup_pkinit=not options.no_pkinit, File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 419, in create_replica self.start_creation(runtime=30) File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 570, in start_creation run_step(full_msg, method) File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 560, in run_step method() File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 1308, in request_service_keytab super(DsInstance, self).request_service_keytab() File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 742, in request_service_keytab self.run_getkeytab(self.api.env.ldap_uri, self.keytab, self.principal) File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 732, in run_getkeytab ipautil.run(args, nolog=nolog) File "/usr/lib/python2.7/site-packages/ipapython/ipautil.py", line 562, in run raise CalledProcessError(p.returncode, arg_string, str(output)) ipapython.admintool: DEBUG The ipa-replica-install command failed, exception: CalledProcessError: Command '/usr/sbin/ipa-getkeytab -k /etc/dirsrv/ds.keytab -p ldap/<ipa-replica-host>@<domain>.NET -H ldaps://<ipa-replica-master>' returned non-zero exit status 9 ipapython.admintool: ERROR Command '/usr/sbin/ipa-getkeytab -k /etc/dirsrv/ds.keytab -p ldap/<ipa-replica-host>@<domain>.NET -H ldaps://<ipa-replica-master>' returned non-zero exit status 9 ipapython.admintool: ERROR The ipa-replica-install command failed. See /var/log/ipareplica-install.log for more information

3 4

Errors in dirsrv log
by Ranbir 14 Mar '25

14 Mar '25

I'm seeing errors like the ones below on my ipa servers (excuse the wrapping): [11/Aug/2023:22:07:37.684144411 -0700] - ERR - get_value_from_string - type does not match: dsEntryDN != dsEntryDN;vucsn-64d5d558000400130000 [11/Aug/2023:22:07:37.686865097 -0700] - ERR - get_value_from_string - type does not match: dsEntryDN != dsEntryDN;vucsn-64d5d8d00004003e0000 [11/Aug/2023:22:07:37.689902756 -0700] - ERR - get_value_from_string - type does not match: dsEntryDN != dsEntryDN;vucsn-64d5dc51000700190000 [11/Aug/2023:22:07:37.693576614 -0700] - ERR - get_value_from_string - type does not match: dsEntryDN != dsEntryDN;vucsn-64d5ff800005002d0000 [11/Aug/2023:22:07:37.696088129 -0700] - ERR - get_value_from_string - type does not match: dsEntryDN != dsEntryDN;vucsn-64d60301000400380000 [11/Aug/2023:22:07:37.698351038 -0700] - ERR - get_value_from_string - type does not match: dsEntryDN != dsEntryDN;vucsn-64d606800007000d0000 I can't find anything about what they mean. What do these errors mean? How do I resolve the problem? -- Ranbir

3 5

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

FreeIPA-users November 2024