HI all,
I am trying to share my laptop net connection with my android devices
via wi-fi. The set-up used to work in Fedora 17. I am now trying the
same on Fedora 18. I get an IP on the device, but am not able to browse
on the device.
Can anyone suggest what is going wrong? Similar rules for libvirt are
working to allow NAT in virtual machines.
Here is the script that tries to set-up stuff.
> #!/bin/bash
> #
> # setup wlan0 with hostapd and firewall masquerade rules
> # to enable devices to use existing internet connection
>
> # is wlan0 usable?
> # try to assign the interface an IP address
> # if we get an error message and error code,
> # prompt for wifi button press
>
> echo "Trying to set up wlan0 interface ... "
> echo "+ sudo ifconfig wlan0 192.168.2.1 netmask 255.255.255.0 up "
> sudo ifconfig wlan0 192.168.2.1 netmask 255.255.255.0 up
> IFCFG_EXIT_CODE="$?"
>
> if [ "IFCFG_EXIT_CODE" -ne 0 ]
> then
> echo "Please press the wifi button (F12) to activate the wireless
> lan interface and try again" 1>&2
> exit 1
> fi
>
> # still here, then wlan0 has an IP address set then
> # our desired IP is on a "net" line of ip command output
> VERIFY_IP="$(ip addr show dev wlan0 | grep "net " | cut -c 10-20)"
>
> if [ "$VERIFY_IP" != "192.168.2.1" ]
> then
> echo "Uh-oh! This script did a boo-boo while setting up IP address
> for wlan0!" 1>&2
> exit 2
> else
> echo "... done setting IP address on wlan0."
> fi
>
> # Time to start hostap daemon
> echo "Trying to start HostAP Daemon ..."
> echo "+ sudo systemctl start hostapd.service"
> sudo systemctl start hostapd.service
> HOSTAPD_STATUS="$?"
>
> if [ $HOSTAPD_STATUS -ne 0 ]
> then
> echo "Sorry! Could not start HostAP Daemon!" 1>&2
> exit 3
> else
> echo "... done starting HostAP daemon."
> fi
>
>
> # Time to start dhcpd daemon
> echo "Trying to start dhcp daemon ..."
> echo "+ sudo systemctl start dhcpd.service"
> sudo systemctl start dhcpd.service
>
> DHCPD_STATUS="$?"
>
> if [ $DHCPD_STATUS -ne 0 ]
> then
> echo "Sorry! Could not start dhcpd Daemon!" 1>&2
> exit 4
> else
> echo "... done starting dhcpd daemon."
> fi
>
> # Time to set up firewall rules
> echo "Setting up firewall to allow internet connection to our client
> devices..."
> # dhcp
> sudo iptables -I INPUT -i wlan0 -p tcp --dport 67 -j ACCEPT
> sudo iptables -I INPUT -i wlan0 -p udp --dport 67 -j ACCEPT
> # dns
> sudo iptables -I INPUT -i wlan0 -p tcp --dport 53 -j ACCEPT
> sudo iptables -I INPUT -i wlan0 -p udp --dport 53 -j ACCEPT
> # forwards
> sudo iptables -I FORWARD -i wlan0 -o wlan0 -j ACCEPT
> sudo iptables -I FORWARD -i wlan0 -s 192.168.2.0/24 -j ACCEPT
> sudo iptables -I FORWARD -o wlan0 -d 192.168.2.0/24 -m conntrack
> --ctstate RELATED,ESTABLISHED -j ACCEPT
> # nat
> sudo iptables -t nat -I POSTROUTING -s 192.168.2.0/24 ! -d
> 192.168.2.0/24 -j MASQUERADE
>
> # some firewalld stuff
> sudo firewall-cmd --zone=public --add-interface=wlan0
Thanks,
Nandan