En las carpetas compartidas tengo para otros y el grupo del usuario
permisos de lectura y ejecución, el dueño del recurso tiene todos los
permisos.
Ambos usuarios tienen cuenta tanto en sistema como en smbpasswd.
Con smbclient -L //192.168.1.5 --user=tu_usuario puedo listar los
recursos que se comparten sin problema.
[BerMeJo@BERMEJO-NEON Almacen]$ testparm
Load smb config files from /etc/samba/smb.conf
Processing section "[Musica]"
Processing section "[Peliculas]"
Processing section "[Software]"
Processing section "[printers]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
[global]
workgroup = CIBERCASA
server string = %h Servidor SAMBA
interfaces = 192.168.1.0/24
username map = /etc/samba/smbusers
log file = /var/log/samba/%m.log
max log size = 50
dns proxy = No
cups options = raw
[Musica]
comment = Mi Musiquita
path = /home/BerMeJo/Almacen/Musica
read only = No
[Peliculas]
comment = Mis Peliculas
path = /home/BerMeJo/Almacen/Pelis
read only = No
[Software]
comment = Software necesario
path = /home/BerMeJo/Almacen/Software
read only = No
[printers]
comment = All Printers
path = /usr/spool/samba
valid users = BerMeJo, Lolilla
write list = BerMeJo
printable = Yes
browseable = No
[BerMeJo@BERMEJO-NEON Almacen]$
Es curioso que en la seccion [global] no aparece security = user. Si
cambio el tipo de seguridad por ejemplo a shared entonces si aparece
security = SHARE
No se si tiene algo que ver...
Gracias por la respuesta y saludos a todos
Rubén Lara
Julio Cesar Sánchez González escribió:
Si no necesitas autenticacion puedes usar security = share y si la
necesitas puedes tener problemas de permisos en carpetas o no haz creado
al usuario con smbpasswd aunque tambien necesita existir en /etc/passwd
dicho usuario.
Prueba con smbclient -L //192.168.1.5 --user=tu_usuario o verifica tu
smb.conf con testparm
Saludos ;)
Julio Cesar Sánchez González
El mar, 06-03-2007 a las 18:21 +0100, BerMeJo escribió:
> Saludos a todos...
>
> Vuelvo a pediros ayuda, puesto que llevo unos dias tratando de
> configurar samba y no lo consigo del todo, ya no se que hacer...
>
> Tengo dos máquinas, una freebsd y otra con nuestra querida u odiada
> fedora. Ambas máquinas tienen dos usuarios, tanto en el sistema como en
> el servidor samba mediante smbpasswd.
>
> La conexión en dirección fedora -> bsd funciona a la perfección, ambos
> usuarios conectan y tengo acceso a los recursos compartidos.
>
> No pasa lo mismo en direccion bsd -> fedora, un usuario me conecta y el
> otro me devuelve siempre el mismo error:
> tree connect failed: NT_STATUS_BAD_NETWORK_NAME
>
> He probado de todo y ya no se que hacer....
>
> Mi smb.conf:
> # This is the main Samba configuration file. You should read the
> # smb.conf(5) manual page in order to understand the options listed
> # here. Samba has a huge number of configurable options (perhaps too
> # many!) most of which are not shown in this example
> #
> # For a step to step guide on installing, configuring and using samba,
> # read the Samba-HOWTO-Collection. This may be obtained from:
> #
http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
> #
> # Many working examples of smb.conf files can be found in the
> # Samba-Guide which is generated daily and can be downloaded from:
> #
http://www.samba.org/samba/docs/Samba-Guide.pdf
> #
> # Any line which starts with a ; (semi-colon) or a # (hash)
> # is a comment and is ignored. In this example we will use a #
> # for commentry and a ; for parts of the config file that you
> # may wish to enable
> #
> # NOTE: Whenever you modify this file you should run the command
"testparm"
> # to check that you have not made any basic syntactic errors.
> #
> #======================= Global Settings
> =====================================
> [global]
>
> # workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
> workgroup = CIBERCASA
>
> # server string is the equivalent of the NT Description field
> server string = %h Servidor SAMBA
>
> # Security mode. Defines in which mode Samba will operate. Possible
> # values are share, user, server, domain and ads. Most people will want
> # user level security. See the Samba-HOWTO-Collection for details.
> security = user
>
> # This option is important for security. It allows you to restrict
> # connections to machines which are on your local network. The
> # following example restricts access to two C class networks and
> # the "loopback" interface. For more examples of the syntax see
> # the smb.conf man page
> ; hosts allow = 192.168.1. 192.168.2. 127.
> hosts allow = 192.168.1.120 192.168.1.150 192.168.1.200 192.168.1.100
>
>
> # If you want to automatically load your printer list rather
> # than setting them up individually then you'll need this
> load printers = yes
>
> # you may wish to override the location of the printcap file
> ; printcap name = /etc/printcap
>
> # on SystemV system setting printcap name to lpstat should allow
> # you to automatically obtain a printer list from the SystemV spool
> # system
> ; printcap name = lpstat
>
> # It should not be necessary to specify the print system type unless
> # it is non-standard. Currently supported print systems include:
> # bsd, cups, sysv, plp, lprng, aix, hpux, qnx
> ; printing = cups
>
> # This option tells cups that the data has already been rasterized
> cups options = raw
>
> # Uncomment this if you want a guest account, you must add this to
> /etc/passwd
> # otherwise the user "nobody" is used
> ; guest account = pcguest
>
> # this tells Samba to use a separate log file for each machine
> # that connects
> log file = /var/log/samba/%m.log
>
> # Put a capping on the size of the log files (in Kb).
> max log size = 50
>
> # Use password server option only with security = server
> # The argument list may include:
> # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
> # or to auto-locate the domain controller/s
> # password server = *
> ; password server = <NT-Server-Name>
>
> # Use the realm option only with security = ads
> # Specifies the Active Directory realm the host is part of
> ; realm = MY_REALM
>
> # Backend to store user information in. New installations should
> # use either tdbsam or ldapsam. smbpasswd is available for backwards
> # compatibility. tdbsam requires no further configuration.
> ; passdb backend = tdbsam
>
> # Using the following line enables you to customise your configuration
> # on a per machine basis. The %m gets replaced with the netbios name
> # of the machine that is connecting.
> # Note: Consider carefully the location in the configuration file of
> # this line. The included file is read at that point.
> ; include = /usr/local/samba/lib/smb.conf.%m
>
> # Configure Samba to use multiple interfaces
> # If you have multiple network interfaces then you must list them
> # here. See the man page for details.
> ; interfaces = 192.168.12.2/24 192.168.13.2/24
> interfaces = 192.168.1.0/24
>
> # Browser Control Options:
> # set local master to no if you don't want Samba to become a master
> # browser on your network. Otherwise the normal election rules apply
> ; local master = no
>
> # OS Level determines the precedence of this server in master browser
> # elections. The default value should be reasonable
> ; os level = 33
>
> # Domain Master specifies Samba to be the Domain Master Browser. This
> # allows Samba to collate browse lists between subnets. Don't use this
> # if you already have a Windows NT domain controller doing this job
> ; domain master = yes
>
> # Preferred Master causes Samba to force a local browser election on startup
> # and gives it a slightly higher chance of winning the election
> ; preferred master = yes
>
> # Enable this if you want Samba to be a domain logon server for
> # Windows95 workstations.
> ; domain logons = yes
>
> # if you enable domain logons then you may want a per-machine or
> # per user logon script
> # run a specific logon batch file per workstation (machine)
> ; logon script = %m.bat
> # run a specific logon batch file per username
> ; logon script = %U.bat
>
> # Where to store roving profiles (only for Win95 and WinNT)
> # %L substitutes for this servers netbios name, %U is username
> # You must uncomment the [Profiles] share below
> ; logon path = \\%L\Profiles\%U
>
> # Windows Internet Name Serving Support Section:
> # WINS Support - Tells the NMBD component of Samba to enable it's WINS
> Server
> ; wins support = yes
>
> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
> ; wins server = w.x.y.z
>
> # WINS Proxy - Tells Samba to answer name resolution queries on
> # behalf of a non WINS capable client, for this to work there must be
> # at least one WINS Server on the network. The default is NO.
> ; wins proxy = yes
>
> # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
> # via DNS nslookups. The default is NO.
> dns proxy = no
> username map = /etc/samba/smbusers
> ; encrypt passwords = yes
> ; guest ok = no
> ; guest account = nobody
>
> # These scripts are used on a domain controller or stand-alone
> # machine to add or delete corresponding unix accounts
> ; add user script = /usr/sbin/useradd %u
> ; add group script = /usr/sbin/groupadd %g
> ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d
> /dev/null -s /bin/false %u
> ; delete user script = /usr/sbin/userdel %u
> ; delete user from group script = /usr/sbin/deluser %u %g
> ; delete group script = /usr/sbin/groupdel %g
>
>
> passdb backend = smbpasswd
>
> #============================ Share Definitions
> ==============================
> #[homes]
> ; comment = Home Directories
> ; browseable = no
> ; writeable = yes
>
> # Un-comment the following and create the netlogon directory for Domain
> Logons
> ; [netlogon]
> ; comment = Network Logon Service
> ; path = /usr/local/samba/lib/netlogon
> ; guest ok = yes
> ; writable = no
> ; share modes = no
>
>
> # Un-comment the following to provide a specific roving profile share
> # the default is to use the user's home directory
> ;[Profiles]
> ; path = /usr/local/samba/profiles
> ; browseable = no
> ; guest ok = yes
>
> [Musica]
> comment = Mi Musiquita
> path = /home/BerMeJo/Almacen/Musica
> browseable = yes
> writeable = yes
>
> [Peliculas]
> comment = Mis Peliculas
> path = /home/BerMeJo/Almacen/Pelis
> browseable = yes
> writeable = yes
>
> [Software]
> comment = Software necesario
> path = /home/BerMeJo/Almacen/Software
> browseable = yes
> writeable = yes
>
> # NOTE: If you have a BSD-style print system there is no need to
> # specifically define each individual printer
> [printers]
> comment = All Printers
> path = /usr/spool/samba
> browseable = no
> # Set public = yes to allow user 'guest account' to print
> ; guest ok = no
> ; writeable = no
> printable = yes
> valid users = BerMeJo Lolilla
> write list = BerMeJo
>
> # This one is useful for people to share files
> ;[tmp]
> ; comment = Temporary file space
> ; path = /tmp
> ; read only = no
> ; public = yes
>
> # A publicly accessible directory, but read only, except for people in
> # the "staff" group
> ;[public]
> ; comment = Public Stuff
> ; path = /home/samba
> ; public = yes
> ; writable = yes
> ; printable = no
> ; write list = @staff
>
> # Other examples.
> #
> # A private printer, usable only by fred. Spool data will be placed in
> fred's
> # home directory. Note that fred must have write access to the spool
> directory,
> # wherever it is.
> ;[fredsprn]
> ; comment = Fred's Printer
> ; valid users = fred
> ; path = /homes/fred
> ; printer = freds_printer
> ; public = no
> ; writable = no
> ; printable = yes
>
> # A private directory, usable only by fred. Note that fred requires write
> # access to the directory.
> ;[fredsdir]
> ; comment = Fred's Service
> ; path = /usr/somewhere/private
> ; valid users = fred
> ; public = no
> ; writable = yes
> ; printable = no
>
> # a service which has a different directory for each machine that connects
> # this allows you to tailor configurations to incoming machines. You could
> # also use the %U option to tailor it by user name.
> # The %m gets replaced with the machine name that is connecting.
> ;[pchome]
> ; comment = PC Directories
> ; path = /usr/pc/%m
> ; public = no
> ; writable = yes
>
> # A publicly accessible directory, read/write to all users. Note that
> all files
> # created in the directory by users will be owned by the default user, so
> # any user with access can delete any other user's files. Obviously this
> # directory must be writable by the default user. Another user could of
> course
> # be specified, in which case all files would be owned by that user instead.
> ;[public]
> ; path = /usr/somewhere/else/public
> ; public = yes
> ; only guest = yes
> ; writable = yes
> ; printable = no
>
> # The following two entries demonstrate how to share a directory so that two
> # users can place files there that will be owned by the specific users.
> In this
> # setup, the directory should be writable by both users and should have the
> # sticky bit set on it to prevent abuse. Obviously this could be extended to
> # as many users as required.
> ;[myshare]
> ; comment = Mary's and Fred's stuff
> ; path = /usr/somewhere/shared
> ; valid users = mary fred
> ; public = no
> ; writable = yes
> ; printable = no
> ; create mask = 0765
>
> Please HELP!!!!
> Graciasy un abrazo a todos de antemano
> Rubén Lara
>
> --
> Fedora-es-list mailing list
> Fedora-es-list(a)redhat.com
> To unsubscribe:
>
https://www.redhat.com/mailman/listinfo/fedora-es-list
>
--
Fedora-es-list mailing list
Fedora-es-list(a)redhat.com
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-es-list
</pre