commit 9bd9f926b69ee3da273169cc2c652900289394d3
Author: Jack Reed <jreed(a)redhat.com>
Date: Fri Mar 30 11:39:04 2012 +1000
Began noloader edits. Removed redundant TUI sections and edited Installing from DVD
en-US/Beginning_Installation-x86.xml | 2 +-
...ical_Installation_User_Interface_x86-note-1.xml | 2 +-
en-US/Installation_Method-x86.xml | 19 ++-----------------
en-US/Installation_Phase_2-common-para-1.xml | 2 +-
en-US/Installation_Phase_2-common-title-1.xml | 2 +-
en-US/Installation_Phase_2-x86.xml | 4 ++--
6 files changed, 8 insertions(+), 23 deletions(-)
---
diff --git a/en-US/Beginning_Installation-x86.xml b/en-US/Beginning_Installation-x86.xml
index 4742420..b6c9a94 100644
--- a/en-US/Beginning_Installation-x86.xml
+++ b/en-US/Beginning_Installation-x86.xml
@@ -38,7 +38,7 @@
</indexterm>
<xi:include href="Beginning_Installation_x86_ppc-para-3.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- If your DVD drive is not detected... --> <para>
- If the DVD drive is found and the driver loaded, the installer will present you with
the option to perform a media check on the DVD. This will take some time, and you may opt
to skip over this step. However, if you later encounter problems with the installer, you
should reboot and perform the media check before calling for support. From the media check
dialog, continue to the next stage of the installation process (refer to <xref
linkend="sn-keyboard-x86" />).
+ If you later encounter problems with the installer, you should reboot and perform the
media check by running the boot option <command>linux mediacheck</command>
before seeking support.
</para>
</section>
diff --git a/en-US/Graphical_Installation_User_Interface_x86-note-1.xml
b/en-US/Graphical_Installation_User_Interface_x86-note-1.xml
index ac2117a..f202fce 100644
--- a/en-US/Graphical_Installation_User_Interface_x86-note-1.xml
+++ b/en-US/Graphical_Installation_User_Interface_x86-note-1.xml
@@ -12,7 +12,7 @@
<screen>
<userinput>linux text</userinput></screen>
<para>
- Refer to <xref linkend="sn-boot-menu-x86" /> for a description of the
Fedora boot menu and to <xref linkend="s1-guimode-textinterface-x86" />
for a brief overview of text mode installation instructions.
+ Refer to <xref linkend="sn-boot-menu-x86" /> for a description of the
Fedora boot menu and to <xref linkend="ch-guimode-x86" /> for a brief
overview of text mode installation instructions.
</para>
<xi:include
href="Graphical_Installation_User_Interface_x86_ppc-note-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- It is highly recommended that installs... --> <xi:include
href="Graphical_Installation_User_Interface_x86_ppc-note-para-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
diff --git a/en-US/Installation_Method-x86.xml b/en-US/Installation_Method-x86.xml
index 981cea8..7d8d01a 100644
--- a/en-US/Installation_Method-x86.xml
+++ b/en-US/Installation_Method-x86.xml
@@ -7,24 +7,9 @@
<xi:include href="Installation_Method_common-title.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- Title: Language Selection --> <xi:include
href="Installation_Method_common-indexterm.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<para>
- If you booted the installation from minimal boot media,use the arrow keys on your
keyboard to select an installation method (refer to <xref
linkend="fig-installationmethod-x86" />). With your selected method
highlighted, press the <keycap>Tab</keycap> key to move to the
<guibutton>OK</guibutton> button and press the
<keycap>Enter</keycap> key to confirm your choice.
+ If you are installing from DVD, additional configuration will not be required unless
the DVD drive is not detected. If you booted the installation from minimal boot media, use
a boot prompt to select an installation method.
</para>
- <figure float="0" id="fig-installationmethod-x86">
- <xi:include href="Installation_Method_common-title.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <mediaobject>
- <imageobject>
- <imagedata fileref="images/installationmethod/method.png"
format="PNG" />
- </imageobject>
- <textobject>
- <para>
- Installation method screen.
- </para>
-
- </textobject>
-
- </mediaobject>
-
- </figure>
+
<xi:include href="Beginning_Installation-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- Installing from DVD --> <xi:include
href="Beginning_Installation_Hard_Disk-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- Installing from a Hard Drive --> <xi:include
href="Beginning_Installation_Network-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
diff --git a/en-US/Installation_Phase_2-common-para-1.xml
b/en-US/Installation_Phase_2-common-para-1.xml
index d454013..67e25c9 100644
--- a/en-US/Installation_Phase_2-common-para-1.xml
+++ b/en-US/Installation_Phase_2-common-para-1.xml
@@ -4,6 +4,6 @@
%BOOK_ENTITIES;
]>
<para>
- Before the graphical installation program starts, you need to configure the language and
installation source.
+ Before the graphical installation program starts, you may need to configure the
installation source depending on the method you are using.
</para>
diff --git a/en-US/Installation_Phase_2-common-title-1.xml
b/en-US/Installation_Phase_2-common-title-1.xml
index 824b9d9..0c250db 100644
--- a/en-US/Installation_Phase_2-common-title-1.xml
+++ b/en-US/Installation_Phase_2-common-title-1.xml
@@ -3,5 +3,5 @@
<!ENTITY % BOOK_ENTITIES SYSTEM "Installation_Guide.ent">
%BOOK_ENTITIES;
]>
-<title>Configuring Language and Installation Source</title>
+<title>Configuring Installation Source</title>
diff --git a/en-US/Installation_Phase_2-x86.xml b/en-US/Installation_Phase_2-x86.xml
index 718a122..c89eddd 100644
--- a/en-US/Installation_Phase_2-x86.xml
+++ b/en-US/Installation_Phase_2-x86.xml
@@ -6,10 +6,10 @@
<chapter id="ch-Installation_Phase_2-x86">
<xi:include href="Installation_Phase_2-common-title-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- Configuring Language and Installation Source --> <xi:include
href="Installation_Phase_2-common-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Before the graphical installation program starts, you must choose a language
--> <xi:include href="Graphical_Installation_x86-common-section-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Before the graphical installation program starts, you must choose a language
--> <!-- <xi:include
href="Graphical_Installation_x86-common-section-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
<!-- The Text Mode Installation Program User Interface
links to Graphical_Installation_common-section-2.xml:
- Using the Keyboard to Navigate --> <xi:include
href="Language_Selection-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ Using the Keyboard to Navigate --> <!-- <xi:include
href="Language_Selection-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
<!-- Language Selection --> <xi:include
href="Installation_Method-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- Installation Method --> <xi:include
href="Verifying_Media.xml"
xmlns:xi="http://www.w3.org/2001/XInclude"
/>
<!-- Verifying Media -->